diff options
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
-rw-r--r-- | drivers/mmc/host/sdhci.c | 54 |
1 files changed, 29 insertions, 25 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index fc96f8cb9c0..c279fbc4c2e 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -591,6 +591,9 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) target_timeout = data->timeout_ns / 1000 + data->timeout_clks / host->clock; + if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) + host->timeout_clk = host->clock / 1000; + /* * Figure out needed cycles. * We do this in steps in order to fit inside a 32 bit int. @@ -652,7 +655,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) count = sdhci_calc_timeout(host, data); sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); - if (host->flags & SDHCI_USE_DMA) + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) host->flags |= SDHCI_REQ_USE_DMA; /* @@ -991,8 +994,8 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) clk |= SDHCI_CLOCK_INT_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); - /* Wait max 10 ms */ - timeout = 10; + /* Wait max 20 ms */ + timeout = 20; while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { if (timeout == 0) { @@ -1597,7 +1600,7 @@ int sdhci_resume_host(struct sdhci_host *host) { int ret; - if (host->flags & SDHCI_USE_DMA) { + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->enable_dma) host->ops->enable_dma(host); } @@ -1678,23 +1681,20 @@ int sdhci_add_host(struct sdhci_host *host) caps = sdhci_readl(host, SDHCI_CAPABILITIES); if (host->quirks & SDHCI_QUIRK_FORCE_DMA) - host->flags |= SDHCI_USE_DMA; - else if (!(caps & SDHCI_CAN_DO_DMA)) - DBG("Controller doesn't have DMA capability\n"); + host->flags |= SDHCI_USE_SDMA; + else if (!(caps & SDHCI_CAN_DO_SDMA)) + DBG("Controller doesn't have SDMA capability\n"); else - host->flags |= SDHCI_USE_DMA; + host->flags |= SDHCI_USE_SDMA; if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) && - (host->flags & SDHCI_USE_DMA)) { + (host->flags & SDHCI_USE_SDMA)) { DBG("Disabling DMA as it is marked broken\n"); - host->flags &= ~SDHCI_USE_DMA; + host->flags &= ~SDHCI_USE_SDMA; } - if (host->flags & SDHCI_USE_DMA) { - if ((host->version >= SDHCI_SPEC_200) && - (caps & SDHCI_CAN_DO_ADMA2)) - host->flags |= SDHCI_USE_ADMA; - } + if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2)) + host->flags |= SDHCI_USE_ADMA; if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) && (host->flags & SDHCI_USE_ADMA)) { @@ -1702,13 +1702,14 @@ int sdhci_add_host(struct sdhci_host *host) host->flags &= ~SDHCI_USE_ADMA; } - if (host->flags & SDHCI_USE_DMA) { + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->enable_dma) { if (host->ops->enable_dma(host)) { printk(KERN_WARNING "%s: No suitable DMA " "available. Falling back to PIO.\n", mmc_hostname(mmc)); - host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA); + host->flags &= + ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA); } } } @@ -1736,7 +1737,7 @@ int sdhci_add_host(struct sdhci_host *host) * mask, but PIO does not need the hw shim so we set a new * mask here in that case. */ - if (!(host->flags & SDHCI_USE_DMA)) { + if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) { host->dma_mask = DMA_BIT_MASK(64); mmc_dev(host->mmc)->dma_mask = &host->dma_mask; } @@ -1757,13 +1758,15 @@ int sdhci_add_host(struct sdhci_host *host) host->timeout_clk = (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; if (host->timeout_clk == 0) { - if (!host->ops->get_timeout_clock) { + if (host->ops->get_timeout_clock) { + host->timeout_clk = host->ops->get_timeout_clock(host); + } else if (!(host->quirks & + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { printk(KERN_ERR "%s: Hardware doesn't specify timeout clock " "frequency.\n", mmc_hostname(mmc)); return -ENODEV; } - host->timeout_clk = host->ops->get_timeout_clock(host); } if (caps & SDHCI_TIMEOUT_CLK_UNIT) host->timeout_clk *= 1000; @@ -1772,7 +1775,8 @@ int sdhci_add_host(struct sdhci_host *host) * Set host parameters. */ mmc->ops = &sdhci_ops; - if (host->ops->get_min_clock) + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK && + host->ops->set_clock && host->ops->get_min_clock) mmc->f_min = host->ops->get_min_clock(host); else mmc->f_min = host->max_clk / 256; @@ -1810,7 +1814,7 @@ int sdhci_add_host(struct sdhci_host *host) */ if (host->flags & SDHCI_USE_ADMA) mmc->max_hw_segs = 128; - else if (host->flags & SDHCI_USE_DMA) + else if (host->flags & SDHCI_USE_SDMA) mmc->max_hw_segs = 1; else /* PIO */ mmc->max_hw_segs = 128; @@ -1893,10 +1897,10 @@ int sdhci_add_host(struct sdhci_host *host) mmc_add_host(mmc); - printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n", + printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n", mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), - (host->flags & SDHCI_USE_ADMA)?"A":"", - (host->flags & SDHCI_USE_DMA)?"DMA":"PIO"); + (host->flags & SDHCI_USE_ADMA) ? "ADMA" : + (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO"); sdhci_enable_card_detection(host); |