diff options
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
-rw-r--r-- | drivers/mmc/host/sdhci.c | 144 |
1 files changed, 88 insertions, 56 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index f4b8b4db3a9..9a11dc39921 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -27,6 +27,7 @@ #include <linux/mmc/mmc.h> #include <linux/mmc/host.h> +#include <linux/mmc/card.h> #include "sdhci.h" @@ -244,6 +245,19 @@ static void sdhci_init(struct sdhci_host *host, int soft) static void sdhci_reinit(struct sdhci_host *host) { sdhci_init(host, 0); + /* + * Retuning stuffs are affected by different cards inserted and only + * applicable to UHS-I cards. So reset these fields to their initial + * value when card is removed. + */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) { + host->flags &= ~SDHCI_USING_RETUNING_TIMER; + + del_timer_sync(&host->tuning_timer); + host->flags &= ~SDHCI_NEEDS_RETUNING; + host->mmc->max_blk_count = + (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535; + } sdhci_enable_card_detection(host); } @@ -1245,6 +1259,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) struct sdhci_host *host; bool present; unsigned long flags; + u32 tuning_opcode; host = mmc_priv(mmc); @@ -1292,8 +1307,12 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) */ if ((host->flags & SDHCI_NEEDS_RETUNING) && !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) { + /* eMMC uses cmd21 while sd and sdio use cmd19 */ + tuning_opcode = mmc->card->type == MMC_TYPE_MMC ? + MMC_SEND_TUNING_BLOCK_HS200 : + MMC_SEND_TUNING_BLOCK; spin_unlock_irqrestore(&host->lock, flags); - sdhci_execute_tuning(mmc, mrq->cmd->opcode); + sdhci_execute_tuning(mmc, tuning_opcode); spin_lock_irqsave(&host->lock, flags); /* Restore original mmc_request structure */ @@ -1663,11 +1682,15 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, pwr = sdhci_readb(host, SDHCI_POWER_CONTROL); pwr &= ~SDHCI_POWER_ON; sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + if (host->vmmc) + regulator_disable(host->vmmc); /* Wait for 1ms as per the spec */ usleep_range(1000, 1500); pwr |= SDHCI_POWER_ON; sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + if (host->vmmc) + regulator_enable(host->vmmc); pr_info(DRIVER_NAME ": Switching to 1.8V signalling " "voltage failed, retrying with S18R set to 0\n"); @@ -1855,6 +1878,7 @@ out: */ if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count && (host->tuning_mode == SDHCI_TUNING_MODE_1)) { + host->flags |= SDHCI_USING_RETUNING_TIMER; mod_timer(&host->tuning_timer, jiffies + host->tuning_count * HZ); /* Tuning mode 1 limits the maximum data length to 4MB */ @@ -1872,10 +1896,10 @@ out: * try tuning again at a later time, when the re-tuning timer expires. * So for these controllers, we return 0. Since there might be other * controllers who do not have this capability, we return error for - * them. + * them. SDHCI_USING_RETUNING_TIMER means the host is currently using + * a retuning timer to do the retuning for the card. */ - if (err && host->tuning_count && - host->tuning_mode == SDHCI_TUNING_MODE_1) + if (err && (host->flags & SDHCI_USING_RETUNING_TIMER)) err = 0; sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier); @@ -2382,7 +2406,6 @@ out: int sdhci_suspend_host(struct sdhci_host *host) { int ret; - bool has_tuning_timer; if (host->ops->platform_suspend) host->ops->platform_suspend(host); @@ -2390,16 +2413,14 @@ int sdhci_suspend_host(struct sdhci_host *host) sdhci_disable_card_detection(host); /* Disable tuning since we are suspending */ - has_tuning_timer = host->version >= SDHCI_SPEC_300 && - host->tuning_count && host->tuning_mode == SDHCI_TUNING_MODE_1; - if (has_tuning_timer) { + if (host->flags & SDHCI_USING_RETUNING_TIMER) { del_timer_sync(&host->tuning_timer); host->flags &= ~SDHCI_NEEDS_RETUNING; } ret = mmc_suspend_host(host->mmc); if (ret) { - if (has_tuning_timer) { + if (host->flags & SDHCI_USING_RETUNING_TIMER) { host->flags |= SDHCI_NEEDS_RETUNING; mod_timer(&host->tuning_timer, jiffies + host->tuning_count * HZ); @@ -2450,8 +2471,7 @@ int sdhci_resume_host(struct sdhci_host *host) host->ops->platform_resume(host); /* Set the re-tuning expiration flag */ - if ((host->version >= SDHCI_SPEC_300) && host->tuning_count && - (host->tuning_mode == SDHCI_TUNING_MODE_1)) + if (host->flags & SDHCI_USING_RETUNING_TIMER) host->flags |= SDHCI_NEEDS_RETUNING; return ret; @@ -2490,8 +2510,7 @@ int sdhci_runtime_suspend_host(struct sdhci_host *host) int ret = 0; /* Disable tuning since we are suspending */ - if (host->version >= SDHCI_SPEC_300 && - host->tuning_mode == SDHCI_TUNING_MODE_1) { + if (host->flags & SDHCI_USING_RETUNING_TIMER) { del_timer_sync(&host->tuning_timer); host->flags &= ~SDHCI_NEEDS_RETUNING; } @@ -2532,8 +2551,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) sdhci_do_enable_preset_value(host, true); /* Set the re-tuning expiration flag */ - if ((host->version >= SDHCI_SPEC_300) && host->tuning_count && - (host->tuning_mode == SDHCI_TUNING_MODE_1)) + if (host->flags & SDHCI_USING_RETUNING_TIMER) host->flags |= SDHCI_NEEDS_RETUNING; spin_lock_irqsave(&host->lock, flags); @@ -2584,7 +2602,7 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host); int sdhci_add_host(struct sdhci_host *host) { struct mmc_host *mmc; - u32 caps[2]; + u32 caps[2] = {0, 0}; u32 max_current_caps; unsigned int ocr_avail; int ret; @@ -2614,8 +2632,10 @@ int sdhci_add_host(struct sdhci_host *host) caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps : sdhci_readl(host, SDHCI_CAPABILITIES); - caps[1] = (host->version >= SDHCI_SPEC_300) ? - sdhci_readl(host, SDHCI_CAPABILITIES_1) : 0; + if (host->version >= SDHCI_SPEC_300) + caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? + host->caps1 : + sdhci_readl(host, SDHCI_CAPABILITIES_1); if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_SDMA; @@ -2779,7 +2799,7 @@ int sdhci_add_host(struct sdhci_host *host) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) && - mmc_card_is_removable(mmc)) + !(host->mmc->caps & MMC_CAP_NONREMOVABLE)) mmc->caps |= MMC_CAP_NEEDS_POLL; /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ @@ -2837,6 +2857,30 @@ int sdhci_add_host(struct sdhci_host *host) SDHCI_RETUNING_MODE_SHIFT; ocr_avail = 0; + + host->vmmc = regulator_get(mmc_dev(mmc), "vmmc"); + if (IS_ERR(host->vmmc)) { + pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc)); + host->vmmc = NULL; + } + +#ifdef CONFIG_REGULATOR + if (host->vmmc) { + ret = regulator_is_supported_voltage(host->vmmc, 3300000, + 3300000); + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330))) + caps[0] &= ~SDHCI_CAN_VDD_330; + ret = regulator_is_supported_voltage(host->vmmc, 3000000, + 3000000); + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300))) + caps[0] &= ~SDHCI_CAN_VDD_300; + ret = regulator_is_supported_voltage(host->vmmc, 1800000, + 1800000); + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180))) + caps[0] &= ~SDHCI_CAN_VDD_180; + } +#endif /* CONFIG_REGULATOR */ + /* * According to SD Host Controller spec v3.00, if the Host System * can afford more than 150mA, Host Driver should set XPC to 1. Also @@ -2845,55 +2889,45 @@ int sdhci_add_host(struct sdhci_host *host) * value. */ max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT); + if (!max_current_caps && host->vmmc) { + u32 curr = regulator_get_current_limit(host->vmmc); + if (curr > 0) { + + /* convert to SDHCI_MAX_CURRENT format */ + curr = curr/1000; /* convert to mA */ + curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER; + + curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT); + max_current_caps = + (curr << SDHCI_MAX_CURRENT_330_SHIFT) | + (curr << SDHCI_MAX_CURRENT_300_SHIFT) | + (curr << SDHCI_MAX_CURRENT_180_SHIFT); + } + } if (caps[0] & SDHCI_CAN_VDD_330) { - int max_current_330; - ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34; - max_current_330 = ((max_current_caps & + mmc->max_current_330 = ((max_current_caps & SDHCI_MAX_CURRENT_330_MASK) >> SDHCI_MAX_CURRENT_330_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_330 > 150) - mmc->caps |= MMC_CAP_SET_XPC_330; } if (caps[0] & SDHCI_CAN_VDD_300) { - int max_current_300; - ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31; - max_current_300 = ((max_current_caps & + mmc->max_current_300 = ((max_current_caps & SDHCI_MAX_CURRENT_300_MASK) >> SDHCI_MAX_CURRENT_300_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_300 > 150) - mmc->caps |= MMC_CAP_SET_XPC_300; } if (caps[0] & SDHCI_CAN_VDD_180) { - int max_current_180; - ocr_avail |= MMC_VDD_165_195; - max_current_180 = ((max_current_caps & + mmc->max_current_180 = ((max_current_caps & SDHCI_MAX_CURRENT_180_MASK) >> SDHCI_MAX_CURRENT_180_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_180 > 150) - mmc->caps |= MMC_CAP_SET_XPC_180; - - /* Maximum current capabilities of the host at 1.8V */ - if (max_current_180 >= 800) - mmc->caps |= MMC_CAP_MAX_CURRENT_800; - else if (max_current_180 >= 600) - mmc->caps |= MMC_CAP_MAX_CURRENT_600; - else if (max_current_180 >= 400) - mmc->caps |= MMC_CAP_MAX_CURRENT_400; - else - mmc->caps |= MMC_CAP_MAX_CURRENT_200; } mmc->ocr_avail = ocr_avail; @@ -2992,13 +3026,10 @@ int sdhci_add_host(struct sdhci_host *host) ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, mmc_hostname(mmc), host); - if (ret) + if (ret) { + pr_err("%s: Failed to request IRQ %d: %d\n", + mmc_hostname(mmc), host->irq, ret); goto untasklet; - - host->vmmc = regulator_get(mmc_dev(mmc), "vmmc"); - if (IS_ERR(host->vmmc)) { - pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc)); - host->vmmc = NULL; } sdhci_init(host, 0); @@ -3016,8 +3047,11 @@ int sdhci_add_host(struct sdhci_host *host) host->led.brightness_set = sdhci_led_control; ret = led_classdev_register(mmc_dev(mmc), &host->led); - if (ret) + if (ret) { + pr_err("%s: Failed to register LED device: %d\n", + mmc_hostname(mmc), ret); goto reset; + } #endif mmiowb(); @@ -3081,8 +3115,6 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) free_irq(host->irq, host); del_timer_sync(&host->timer); - if (host->version >= SDHCI_SPEC_300) - del_timer_sync(&host->tuning_timer); tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); |