summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
-rw-r--r--drivers/mmc/host/sdhci.c54
1 files changed, 29 insertions, 25 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index fc96f8cb9c0..c279fbc4c2e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -591,6 +591,9 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
target_timeout = data->timeout_ns / 1000 +
data->timeout_clks / host->clock;
+ if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
+ host->timeout_clk = host->clock / 1000;
+
/*
* Figure out needed cycles.
* We do this in steps in order to fit inside a 32 bit int.
@@ -652,7 +655,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
count = sdhci_calc_timeout(host, data);
sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
- if (host->flags & SDHCI_USE_DMA)
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
host->flags |= SDHCI_REQ_USE_DMA;
/*
@@ -991,8 +994,8 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
clk |= SDHCI_CLOCK_INT_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
- /* Wait max 10 ms */
- timeout = 10;
+ /* Wait max 20 ms */
+ timeout = 20;
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
@@ -1597,7 +1600,7 @@ int sdhci_resume_host(struct sdhci_host *host)
{
int ret;
- if (host->flags & SDHCI_USE_DMA) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma)
host->ops->enable_dma(host);
}
@@ -1678,23 +1681,20 @@ int sdhci_add_host(struct sdhci_host *host)
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
- host->flags |= SDHCI_USE_DMA;
- else if (!(caps & SDHCI_CAN_DO_DMA))
- DBG("Controller doesn't have DMA capability\n");
+ host->flags |= SDHCI_USE_SDMA;
+ else if (!(caps & SDHCI_CAN_DO_SDMA))
+ DBG("Controller doesn't have SDMA capability\n");
else
- host->flags |= SDHCI_USE_DMA;
+ host->flags |= SDHCI_USE_SDMA;
if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
- (host->flags & SDHCI_USE_DMA)) {
+ (host->flags & SDHCI_USE_SDMA)) {
DBG("Disabling DMA as it is marked broken\n");
- host->flags &= ~SDHCI_USE_DMA;
+ host->flags &= ~SDHCI_USE_SDMA;
}
- if (host->flags & SDHCI_USE_DMA) {
- if ((host->version >= SDHCI_SPEC_200) &&
- (caps & SDHCI_CAN_DO_ADMA2))
- host->flags |= SDHCI_USE_ADMA;
- }
+ if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2))
+ host->flags |= SDHCI_USE_ADMA;
if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
(host->flags & SDHCI_USE_ADMA)) {
@@ -1702,13 +1702,14 @@ int sdhci_add_host(struct sdhci_host *host)
host->flags &= ~SDHCI_USE_ADMA;
}
- if (host->flags & SDHCI_USE_DMA) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
printk(KERN_WARNING "%s: No suitable DMA "
"available. Falling back to PIO.\n",
mmc_hostname(mmc));
- host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA);
+ host->flags &=
+ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
}
}
}
@@ -1736,7 +1737,7 @@ int sdhci_add_host(struct sdhci_host *host)
* mask, but PIO does not need the hw shim so we set a new
* mask here in that case.
*/
- if (!(host->flags & SDHCI_USE_DMA)) {
+ if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
host->dma_mask = DMA_BIT_MASK(64);
mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
}
@@ -1757,13 +1758,15 @@ int sdhci_add_host(struct sdhci_host *host)
host->timeout_clk =
(caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
if (host->timeout_clk == 0) {
- if (!host->ops->get_timeout_clock) {
+ if (host->ops->get_timeout_clock) {
+ host->timeout_clk = host->ops->get_timeout_clock(host);
+ } else if (!(host->quirks &
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
printk(KERN_ERR
"%s: Hardware doesn't specify timeout clock "
"frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
- host->timeout_clk = host->ops->get_timeout_clock(host);
}
if (caps & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
@@ -1772,7 +1775,8 @@ int sdhci_add_host(struct sdhci_host *host)
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
- if (host->ops->get_min_clock)
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK &&
+ host->ops->set_clock && host->ops->get_min_clock)
mmc->f_min = host->ops->get_min_clock(host);
else
mmc->f_min = host->max_clk / 256;
@@ -1810,7 +1814,7 @@ int sdhci_add_host(struct sdhci_host *host)
*/
if (host->flags & SDHCI_USE_ADMA)
mmc->max_hw_segs = 128;
- else if (host->flags & SDHCI_USE_DMA)
+ else if (host->flags & SDHCI_USE_SDMA)
mmc->max_hw_segs = 1;
else /* PIO */
mmc->max_hw_segs = 128;
@@ -1893,10 +1897,10 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_add_host(mmc);
- printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
+ printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
- (host->flags & SDHCI_USE_ADMA)?"A":"",
- (host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
+ (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
sdhci_enable_card_detection(host);