summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
-rw-r--r--drivers/mmc/host/sdhci.c54
1 files changed, 43 insertions, 11 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 782c0ee3c92..a25db426c91 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1185,17 +1185,31 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (host->ops->platform_send_init_74_clocks)
host->ops->platform_send_init_74_clocks(host, ios->power_mode);
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-
- if (ios->bus_width == MMC_BUS_WIDTH_8)
- ctrl |= SDHCI_CTRL_8BITBUS;
- else
- ctrl &= ~SDHCI_CTRL_8BITBUS;
+ /*
+ * If your platform has 8-bit width support but is not a v3 controller,
+ * or if it requires special setup code, you should implement that in
+ * platform_8bit_width().
+ */
+ if (host->ops->platform_8bit_width)
+ host->ops->platform_8bit_width(host, ios->bus_width);
+ else {
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ if (ios->bus_width == MMC_BUS_WIDTH_8) {
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl |= SDHCI_CTRL_8BITBUS;
+ } else {
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ }
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
- if (ios->bus_width == MMC_BUS_WIDTH_4)
- ctrl |= SDHCI_CTRL_4BITBUS;
- else
- ctrl &= ~SDHCI_CTRL_4BITBUS;
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if ((ios->timing == MMC_TIMING_SD_HS ||
ios->timing == MMC_TIMING_MMC_HS)
@@ -1681,6 +1695,16 @@ int sdhci_resume_host(struct sdhci_host *host)
EXPORT_SYMBOL_GPL(sdhci_resume_host);
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+ u8 val;
+ val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+ val |= SDHCI_WAKE_ON_INT;
+ sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
#endif /* CONFIG_PM */
/*****************************************************************************\
@@ -1845,11 +1869,19 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
mmc->f_max = host->max_clk;
mmc->caps |= MMC_CAP_SDIO_IRQ;
+ /*
+ * A controller may support 8-bit width, but the board itself
+ * might not have the pins brought out. Boards that support
+ * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+ * their platform code before calling sdhci_add_host(), and we
+ * won't assume 8-bit width for hosts without that CAP.
+ */
if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
- mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;