summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/Kconfig66
-rw-r--r--drivers/mmc/host/Makefile8
-rw-r--r--drivers/mmc/host/at91_mci.c1
-rw-r--r--drivers/mmc/host/atmel-mci.c141
-rw-r--r--drivers/mmc/host/bfin_sdh.c639
-rw-r--r--drivers/mmc/host/davinci_mmc.c1349
-rw-r--r--drivers/mmc/host/mmci.c43
-rw-r--r--drivers/mmc/host/msm_sdcc.c5
-rw-r--r--drivers/mmc/host/mxcmmc.c10
-rw-r--r--drivers/mmc/host/of_mmc_spi.c2
-rw-r--r--drivers/mmc/host/omap.c21
-rw-r--r--drivers/mmc/host/omap_hsmmc.c10
-rw-r--r--drivers/mmc/host/pxamci.c20
-rw-r--r--drivers/mmc/host/s3cmci.c15
-rw-r--r--drivers/mmc/host/sdhci-of-core.c (renamed from drivers/mmc/host/sdhci-of.c)143
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c143
-rw-r--r--drivers/mmc/host/sdhci-of-hlwd.c65
-rw-r--r--drivers/mmc/host/sdhci-of.h42
-rw-r--r--drivers/mmc/host/sdhci-pci.c75
-rw-r--r--drivers/mmc/host/sdhci.h4
-rw-r--r--drivers/mmc/host/tmio_mmc.c61
-rw-r--r--drivers/mmc/host/tmio_mmc.h46
22 files changed, 2612 insertions, 297 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 432ae8358c8..ce1d28884e2 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -44,6 +44,19 @@ config MMC_SDHCI_IO_ACCESSORS
This is silent Kconfig symbol that is selected by the drivers that
need to overwrite SDHCI IO memory accessors.
+config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+ bool
+ select MMC_SDHCI_IO_ACCESSORS
+ help
+ This option is selected by drivers running on big endian hosts
+ and performing I/O to a SDHCI controller through a bus that
+ implements a hardware byte swapper using a 32-bit datum.
+ This endian mapping mode is called "data invariance" and
+ has the effect of scrambling the addresses and formats of data
+ accessed in sizes other than the datum size.
+
+ This is the case for the Freescale eSDHC and Nintendo Wii SDHCI.
+
config MMC_SDHCI_PCI
tristate "SDHCI support on PCI bus"
depends on MMC_SDHCI && PCI
@@ -75,11 +88,29 @@ config MMC_RICOH_MMC
config MMC_SDHCI_OF
tristate "SDHCI support on OpenFirmware platforms"
depends on MMC_SDHCI && PPC_OF
- select MMC_SDHCI_IO_ACCESSORS
help
This selects the OF support for Secure Digital Host Controller
- Interfaces. So far, only the Freescale eSDHC controller is known
- to exist on OF platforms.
+ Interfaces.
+
+ If unsure, say N.
+
+config MMC_SDHCI_OF_ESDHC
+ bool "SDHCI OF support for the Freescale eSDHC controller"
+ depends on MMC_SDHCI_OF
+ select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+ help
+ This selects the Freescale eSDHC controller support.
+
+ If unsure, say N.
+
+config MMC_SDHCI_OF_HLWD
+ bool "SDHCI OF support for the Nintendo Wii SDHCI controllers"
+ depends on MMC_SDHCI_OF
+ select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ found in the "Hollywood" chipset of the Nintendo Wii video game
+ console.
If unsure, say N.
@@ -251,6 +282,14 @@ config MMC_MVSDIO
To compile this driver as a module, choose M here: the
module will be called mvsdio.
+config MMC_DAVINCI
+ tristate "TI DAVINCI Multimedia Card Interface support"
+ depends on ARCH_DAVINCI
+ help
+ This selects the TI DAVINCI Multimedia card Interface.
+ If you have an DAVINCI board with a Multimedia Card slot,
+ say Y or M here. If unsure, say N.
+
config MMC_SPI
tristate "MMC/SD/SDIO over SPI"
depends on SPI_MASTER && !HIGHMEM && HAS_DMA
@@ -329,7 +368,7 @@ config MMC_SDRICOH_CS
config MMC_TMIO
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
- depends on MFD_TMIO || MFD_ASIC3
+ depends on MFD_TMIO || MFD_ASIC3 || SUPERH
help
This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also HTC ASIC3
@@ -357,3 +396,22 @@ config MMC_VIA_SDMMC
If you have a controller with this interface, say Y or M here.
If unsure, say N.
+
+config SDH_BFIN
+ tristate "Blackfin Secure Digital Host support"
+ depends on MMC && ((BF54x && !BF544) || (BF51x && !BF512))
+ help
+ If you say yes here you will get support for the Blackfin on-chip
+ Secure Digital Host interface. This includes support for MMC and
+ SD cards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_sdh.
+
+ If unsure, say N.
+
+config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+ bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
+ depends on SDH_BFIN
+ help
+ If you say yes here SD-Cards may work on the EZkit.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index abcb0400e06..3d253dd4240 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
-obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
@@ -25,6 +24,7 @@ obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_MSM7X00A) += msm_sdcc.o
obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
+obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
ifeq ($(CONFIG_OF),y)
obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
@@ -34,6 +34,12 @@ obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
+obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o
+
+obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
+sdhci-of-y := sdhci-of-core.o
+sdhci-of-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
+sdhci-of-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index e556d42cc45..63924e0c7ea 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -72,7 +72,6 @@
#include <asm/irq.h>
#include <asm/gpio.h>
-#include <asm/mach/mmc.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91_mci.h>
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index fc25586b7ee..8072128e933 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -25,6 +25,8 @@
#include <linux/stat.h>
#include <linux/mmc/host.h>
+
+#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
#include <asm/io.h>
@@ -92,6 +94,7 @@ struct atmel_mci_dma {
* @need_clock_update: Update the clock rate before the next request.
* @need_reset: Reset controller before next request.
* @mode_reg: Value of the MR register.
+ * @cfg_reg: Value of the CFG register.
* @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
* rate and timeout calculations.
* @mapbase: Physical address of the MMIO registers.
@@ -155,6 +158,7 @@ struct atmel_mci {
bool need_clock_update;
bool need_reset;
u32 mode_reg;
+ u32 cfg_reg;
unsigned long bus_hz;
unsigned long mapbase;
struct clk *mck;
@@ -223,6 +227,19 @@ static bool mci_has_rwproof(void)
}
/*
+ * The new MCI2 module isn't 100% compatible with the old MCI module,
+ * and it has a few nice features which we want to use...
+ */
+static inline bool atmci_is_mci2(void)
+{
+ if (cpu_is_at91sam9g45())
+ return true;
+
+ return false;
+}
+
+
+/*
* The debugfs stuff below is mostly optimized away when
* CONFIG_DEBUG_FS is not set.
*/
@@ -357,12 +374,33 @@ static int atmci_regs_show(struct seq_file *s, void *v)
buf[MCI_BLKR / 4],
buf[MCI_BLKR / 4] & 0xffff,
(buf[MCI_BLKR / 4] >> 16) & 0xffff);
+ if (atmci_is_mci2())
+ seq_printf(s, "CSTOR:\t0x%08x\n", buf[MCI_CSTOR / 4]);
/* Don't read RSPR and RDR; it will consume the data there */
atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
+ if (atmci_is_mci2()) {
+ u32 val;
+
+ val = buf[MCI_DMA / 4];
+ seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n",
+ val, val & 3,
+ ((val >> 4) & 3) ?
+ 1 << (((val >> 4) & 3) + 1) : 1,
+ val & MCI_DMAEN ? " DMAEN" : "");
+
+ val = buf[MCI_CFG / 4];
+ seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n",
+ val,
+ val & MCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
+ val & MCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
+ val & MCI_CFG_HSMODE ? " HSMODE" : "",
+ val & MCI_CFG_LSYNC ? " LSYNC" : "");
+ }
+
kfree(buf);
return 0;
@@ -557,6 +595,10 @@ static void atmci_dma_complete(void *arg)
dev_vdbg(&host->pdev->dev, "DMA complete\n");
+ if (atmci_is_mci2())
+ /* Disable DMA hardware handshaking on MCI */
+ mci_writel(host, DMA, mci_readl(host, DMA) & ~MCI_DMAEN);
+
atmci_dma_cleanup(host);
/*
@@ -592,7 +634,7 @@ static void atmci_dma_complete(void *arg)
}
static int
-atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
+atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
{
struct dma_chan *chan;
struct dma_async_tx_descriptor *desc;
@@ -624,6 +666,9 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
if (!chan)
return -ENODEV;
+ if (atmci_is_mci2())
+ mci_writel(host, DMA, MCI_DMA_CHKSIZE(3) | MCI_DMAEN);
+
if (data->flags & MMC_DATA_READ)
direction = DMA_FROM_DEVICE;
else
@@ -641,10 +686,6 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
host->dma.data_desc = desc;
desc->callback = atmci_dma_complete;
desc->callback_param = host;
- desc->tx_submit(desc);
-
- /* Go! */
- chan->device->device_issue_pending(chan);
return 0;
unmap_exit:
@@ -652,13 +693,26 @@ unmap_exit:
return -ENOMEM;
}
+static void atmci_submit_data(struct atmel_mci *host)
+{
+ struct dma_chan *chan = host->data_chan;
+ struct dma_async_tx_descriptor *desc = host->dma.data_desc;
+
+ if (chan) {
+ desc->tx_submit(desc);
+ chan->device->device_issue_pending(chan);
+ }
+}
+
#else /* CONFIG_MMC_ATMELMCI_DMA */
-static int atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
+static int atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
{
return -ENOSYS;
}
+static void atmci_submit_data(struct atmel_mci *host) {}
+
static void atmci_stop_dma(struct atmel_mci *host)
{
/* Data transfer was stopped by the interrupt handler */
@@ -672,7 +726,7 @@ static void atmci_stop_dma(struct atmel_mci *host)
* Returns a mask of interrupt flags to be enabled after the whole
* request has been prepared.
*/
-static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
+static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
{
u32 iflags;
@@ -683,7 +737,7 @@ static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
host->data = data;
iflags = ATMCI_DATA_ERROR_FLAGS;
- if (atmci_submit_data_dma(host, data)) {
+ if (atmci_prepare_data_dma(host, data)) {
host->data_chan = NULL;
/*
@@ -729,6 +783,8 @@ static void atmci_start_request(struct atmel_mci *host,
mci_writel(host, CR, MCI_CR_SWRST);
mci_writel(host, CR, MCI_CR_MCIEN);
mci_writel(host, MR, host->mode_reg);
+ if (atmci_is_mci2())
+ mci_writel(host, CFG, host->cfg_reg);
host->need_reset = false;
}
mci_writel(host, SDCR, slot->sdc_reg);
@@ -744,6 +800,7 @@ static void atmci_start_request(struct atmel_mci *host,
while (!(mci_readl(host, SR) & MCI_CMDRDY))
cpu_relax();
}
+ iflags = 0;
data = mrq->data;
if (data) {
atmci_set_timeout(host, slot, data);
@@ -753,15 +810,17 @@ static void atmci_start_request(struct atmel_mci *host,
| MCI_BLKLEN(data->blksz));
dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
+
+ iflags |= atmci_prepare_data(host, data);
}
- iflags = MCI_CMDRDY;
+ iflags |= MCI_CMDRDY;
cmd = mrq->cmd;
cmdflags = atmci_prepare_command(slot->mmc, cmd);
atmci_start_command(host, cmd, cmdflags);
if (data)
- iflags |= atmci_submit_data(host, data);
+ atmci_submit_data(host);
if (mrq->stop) {
host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
@@ -857,6 +916,8 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
clk_enable(host->mck);
mci_writel(host, CR, MCI_CR_SWRST);
mci_writel(host, CR, MCI_CR_MCIEN);
+ if (atmci_is_mci2())
+ mci_writel(host, CFG, host->cfg_reg);
}
/*
@@ -1095,6 +1156,8 @@ static void atmci_detect_change(unsigned long data)
mci_writel(host, CR, MCI_CR_SWRST);
mci_writel(host, CR, MCI_CR_MCIEN);
mci_writel(host, MR, host->mode_reg);
+ if (atmci_is_mci2())
+ mci_writel(host, CFG, host->cfg_reg);
host->data = NULL;
host->cmd = NULL;
@@ -1584,14 +1647,47 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
#ifdef CONFIG_MMC_ATMELMCI_DMA
static bool filter(struct dma_chan *chan, void *slave)
{
- struct dw_dma_slave *dws = slave;
+ struct mci_dma_data *sl = slave;
- if (dws->dma_dev == chan->device->dev) {
- chan->private = dws;
+ if (sl && find_slave_dev(sl) == chan->device->dev) {
+ chan->private = slave_data_ptr(sl);
return true;
- } else
+ } else {
return false;
+ }
}
+
+static void atmci_configure_dma(struct atmel_mci *host)
+{
+ struct mci_platform_data *pdata;
+
+ if (host == NULL)
+ return;
+
+ pdata = host->pdev->dev.platform_data;
+
+ if (pdata && find_slave_dev(pdata->dma_slave)) {
+ dma_cap_mask_t mask;
+
+ setup_dma_addr(pdata->dma_slave,
+ host->mapbase + MCI_TDR,
+ host->mapbase + MCI_RDR);
+
+ /* Try to grab a DMA channel */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ host->dma.chan =
+ dma_request_channel(mask, filter, pdata->dma_slave);
+ }
+ if (!host->dma.chan)
+ dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
+ else
+ dev_info(&host->pdev->dev,
+ "Using %s for DMA transfers\n",
+ dma_chan_name(host->dma.chan));
+}
+#else
+static void atmci_configure_dma(struct atmel_mci *host) {}
#endif
static int __init atmci_probe(struct platform_device *pdev)
@@ -1645,22 +1741,7 @@ static int __init atmci_probe(struct platform_device *pdev)
if (ret)
goto err_request_irq;
-#ifdef CONFIG_MMC_ATMELMCI_DMA
- if (pdata->dma_slave.dma_dev) {
- struct dw_dma_slave *dws = &pdata->dma_slave;
- dma_cap_mask_t mask;
-
- dws->tx_reg = regs->start + MCI_TDR;
- dws->rx_reg = regs->start + MCI_RDR;
-
- /* Try to grab a DMA channel */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- host->dma.chan = dma_request_channel(mask, filter, dws);
- }
- if (!host->dma.chan)
- dev_notice(&pdev->dev, "DMA not available, using PIO\n");
-#endif /* CONFIG_MMC_ATMELMCI_DMA */
+ atmci_configure_dma(host);
platform_set_drvdata(pdev, host);
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
new file mode 100644
index 00000000000..3343a57355c
--- /dev/null
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -0,0 +1,639 @@
+/*
+ * bfin_sdh.c - Analog Devices Blackfin SDH Controller
+ *
+ * Copyright (C) 2007-2009 Analog Device Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define DRIVER_NAME "bfin-sdh"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include <linux/proc_fs.h>
+
+#include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+#include <asm/bfin_sdh.h>
+
+#if defined(CONFIG_BF51x)
+#define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL
+#define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL
+#define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CTL
+#define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CTL
+#define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT
+#define bfin_write_SDH_COMMAND bfin_write_RSI_COMMAND
+#define bfin_write_SDH_DATA_TIMER bfin_write_RSI_DATA_TIMER
+#define bfin_read_SDH_RESPONSE0 bfin_read_RSI_RESPONSE0
+#define bfin_read_SDH_RESPONSE1 bfin_read_RSI_RESPONSE1
+#define bfin_read_SDH_RESPONSE2 bfin_read_RSI_RESPONSE2
+#define bfin_read_SDH_RESPONSE3 bfin_read_RSI_RESPONSE3
+#define bfin_write_SDH_DATA_LGTH bfin_write_RSI_DATA_LGTH
+#define bfin_read_SDH_DATA_CTL bfin_read_RSI_DATA_CTL
+#define bfin_write_SDH_DATA_CTL bfin_write_RSI_DATA_CTL
+#define bfin_read_SDH_DATA_CNT bfin_read_RSI_DATA_CNT
+#define bfin_write_SDH_STATUS_CLR bfin_write_RSI_STATUS_CLR
+#define bfin_read_SDH_E_STATUS bfin_read_RSI_E_STATUS
+#define bfin_write_SDH_E_STATUS bfin_write_RSI_E_STATUS
+#define bfin_read_SDH_STATUS bfin_read_RSI_STATUS
+#define bfin_write_SDH_MASK0 bfin_write_RSI_MASK0
+#define bfin_read_SDH_CFG bfin_read_RSI_CFG
+#define bfin_write_SDH_CFG bfin_write_RSI_CFG
+#endif
+
+struct dma_desc_array {
+ unsigned long start_addr;
+ unsigned short cfg;
+ unsigned short x_count;
+ short x_modify;
+} __packed;
+
+struct sdh_host {
+ struct mmc_host *mmc;
+ spinlock_t lock;
+ struct resource *res;
+ void __iomem *base;
+ int irq;
+ int stat_irq;
+ int dma_ch;
+ int dma_dir;
+ struct dma_desc_array *sg_cpu;
+ dma_addr_t sg_dma;
+ int dma_len;
+
+ unsigned int imask;
+ unsigned int power_mode;
+ unsigned int clk_div;
+
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+};
+
+static struct bfin_sd_host *get_sdh_data(struct platform_device *pdev)
+{
+ return pdev->dev.platform_data;
+}
+
+static void sdh_stop_clock(struct sdh_host *host)
+{
+ bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() & ~CLK_E);
+ SSYNC();
+}
+
+static void sdh_enable_stat_irq(struct sdh_host *host, unsigned int mask)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->imask |= mask;
+ bfin_write_SDH_MASK0(mask);
+ SSYNC();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void sdh_disable_stat_irq(struct sdh_host *host, unsigned int mask)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->imask &= ~mask;
+ bfin_write_SDH_MASK0(host->imask);
+ SSYNC();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
+{
+ unsigned int length;
+ unsigned int data_ctl;
+ unsigned int dma_cfg;
+ struct scatterlist *sg;
+
+ dev_dbg(mmc_dev(host->mmc), "%s enter flags: 0x%x\n", __func__, data->flags);
+ host->data = data;
+ data_ctl = 0;
+ dma_cfg = 0;
+
+ length = data->blksz * data->blocks;
+ bfin_write_SDH_DATA_LGTH(length);
+
+ if (data->flags & MMC_DATA_STREAM)
+ data_ctl |= DTX_MODE;
+
+ if (data->flags & MMC_DATA_READ)
+ data_ctl |= DTX_DIR;
+ /* Only supports power-of-2 block size */
+ if (data->blksz & (data->blksz - 1))
+ return -EINVAL;
+ data_ctl |= ((ffs(data->blksz) - 1) << 4);
+
+ bfin_write_SDH_DATA_CTL(data_ctl);
+
+ bfin_write_SDH_DATA_TIMER(0xFFFF);
+ SSYNC();
+
+ if (data->flags & MMC_DATA_READ) {
+ host->dma_dir = DMA_FROM_DEVICE;
+ dma_cfg |= WNR;
+ } else
+ host->dma_dir = DMA_TO_DEVICE;
+
+ sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END));
+ host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir);
+#if defined(CONFIG_BF54x)
+ dma_cfg |= DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_32 | DMAEN;
+ {
+ int i;
+ for_each_sg(data->sg, sg, host->dma_len, i) {
+ host->sg_cpu[i].start_addr = sg_dma_address(sg);
+ host->sg_cpu[i].cfg = dma_cfg;
+ host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
+ host->sg_cpu[i].x_modify = 4;
+ dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
+ "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
+ i, host->sg_cpu[i].start_addr,
+ host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
+ host->sg_cpu[i].x_modify);
+ }
+ }
+ flush_dcache_range((unsigned int)host->sg_cpu,
+ (unsigned int)host->sg_cpu +
+ host->dma_len * sizeof(struct dma_desc_array));
+ /* Set the last descriptor to stop mode */
+ host->sg_cpu[host->dma_len - 1].cfg &= ~(DMAFLOW | NDSIZE);
+ host->sg_cpu[host->dma_len - 1].cfg |= DI_EN;
+
+ set_dma_curr_desc_addr(host->dma_ch, (unsigned long *)host->sg_dma);
+ set_dma_x_count(host->dma_ch, 0);
+ set_dma_x_modify(host->dma_ch, 0);
+ set_dma_config(host->dma_ch, dma_cfg);
+#elif defined(CONFIG_BF51x)
+ /* RSI DMA doesn't work in array mode */
+ dma_cfg |= WDSIZE_32 | DMAEN;
+ set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0]));
+ set_dma_x_count(host->dma_ch, length / 4);
+ set_dma_x_modify(host->dma_ch, 4);
+ set_dma_config(host->dma_ch, dma_cfg);
+#endif
+ bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
+
+ SSYNC();
+
+ dev_dbg(mmc_dev(host->mmc), "%s exit\n", __func__);
+ return 0;
+}
+
+static void sdh_start_cmd(struct sdh_host *host, struct mmc_command *cmd)
+{
+ unsigned int sdh_cmd;
+ unsigned int stat_mask;
+
+ dev_dbg(mmc_dev(host->mmc), "%s enter cmd: 0x%p\n", __func__, cmd);
+ WARN_ON(host->cmd != NULL);
+ host->cmd = cmd;
+
+ sdh_cmd = 0;
+ stat_mask = 0;
+
+ sdh_cmd |= cmd->opcode;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ sdh_cmd |= CMD_RSP;
+ stat_mask |= CMD_RESP_END;
+ } else {
+ stat_mask |= CMD_SENT;
+ }
+
+ if (cmd->flags & MMC_RSP_136)
+ sdh_cmd |= CMD_L_RSP;
+
+ stat_mask |= CMD_CRC_FAIL | CMD_TIME_OUT;
+
+ sdh_enable_stat_irq(host, stat_mask);
+
+ bfin_write_SDH_ARGUMENT(cmd->arg);
+ bfin_write_SDH_COMMAND(sdh_cmd | CMD_E);
+ bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() | CLK_E);
+ SSYNC();
+}
+
+static void sdh_finish_request(struct sdh_host *host, struct mmc_request *mrq)
+{
+ dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__);
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+ mmc_request_done(host->mmc, mrq);
+}
+
+static int sdh_cmd_done(struct sdh_host *host, unsigned int stat)
+{
+ struct mmc_command *cmd = host->cmd;
+ int ret = 0;
+
+ dev_dbg(mmc_dev(host->mmc), "%s enter cmd: %p\n", __func__, cmd);
+ if (!cmd)
+ return 0;
+
+ host->cmd = NULL;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ cmd->resp[0] = bfin_read_SDH_RESPONSE0();
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[1] = bfin_read_SDH_RESPONSE1();
+ cmd->resp[2] = bfin_read_SDH_RESPONSE2();
+ cmd->resp[3] = bfin_read_SDH_RESPONSE3();
+ }
+ }
+ if (stat & CMD_TIME_OUT)
+ cmd->error = -ETIMEDOUT;
+ else if (stat & CMD_CRC_FAIL && cmd->flags & MMC_RSP_CRC)
+ cmd->error = -EILSEQ;
+
+ sdh_disable_stat_irq(host, (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT | CMD_CRC_FAIL));
+
+ if (host->data && !cmd->error) {
+ if (host->data->flags & MMC_DATA_WRITE) {
+ ret = sdh_setup_data(host, host->data);
+ if (ret)
+ return 0;
+ }
+
+ sdh_enable_stat_irq(host, DAT_END | RX_OVERRUN | TX_UNDERRUN | DAT_TIME_OUT);
+ } else
+ sdh_finish_request(host, host->mrq);
+
+ return 1;
+}
+
+static int sdh_data_done(struct sdh_host *host, unsigned int stat)
+{
+ struct mmc_data *data = host->data;
+
+ dev_dbg(mmc_dev(host->mmc), "%s enter stat: 0x%x\n", __func__, stat);
+ if (!data)
+ return 0;
+
+ disable_dma(host->dma_ch);
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ host->dma_dir);
+
+ if (stat & DAT_TIME_OUT)
+ data->error = -ETIMEDOUT;
+ else if (stat & DAT_CRC_FAIL)
+ data->error = -EILSEQ;
+ else if (stat & (RX_OVERRUN | TX_UNDERRUN))
+ data->error = -EIO;
+
+ if (!data->error)
+ data->bytes_xfered = data->blocks * data->blksz;
+ else
+ data->bytes_xfered = 0;
+
+ sdh_disable_stat_irq(host, DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN);
+ bfin_write_SDH_STATUS_CLR(DAT_END_STAT | DAT_TIMEOUT_STAT | \
+ DAT_CRC_FAIL_STAT | DAT_BLK_END_STAT | RX_OVERRUN | TX_UNDERRUN);
+ bfin_write_SDH_DATA_CTL(0);
+ SSYNC();
+
+ host->data = NULL;
+ if (host->mrq->stop) {
+ sdh_stop_clock(host);
+ sdh_start_cmd(host, host->mrq->stop);
+ } else {
+ sdh_finish_request(host, host->mrq);
+ }
+
+ return 1;
+}
+
+static void sdh_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sdh_host *host = mmc_priv(mmc);
+ int ret = 0;
+
+ dev_dbg(mmc_dev(host->mmc), "%s enter, mrp:%p, cmd:%p\n", __func__, mrq, mrq->cmd);
+ WARN_ON(host->mrq != NULL);
+
+ host->mrq = mrq;
+ host->data = mrq->data;
+
+ if (mrq->data && mrq->data->flags & MMC_DATA_READ) {
+ ret = sdh_setup_data(host, mrq->data);
+ if (ret)
+ return;
+ }
+
+ sdh_start_cmd(host, mrq->cmd);
+}
+
+static void sdh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdh_host *host;
+ unsigned long flags;
+ u16 clk_ctl = 0;
+ u16 pwr_ctl = 0;
+ u16 cfg;
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (ios->clock) {
+ unsigned long sys_clk, ios_clk;
+ unsigned char clk_div;
+ ios_clk = 2 * ios->clock;
+ sys_clk = get_sclk();
+ clk_div = sys_clk / ios_clk;
+ if (sys_clk % ios_clk == 0)
+ clk_div -= 1;
+ clk_div = min_t(unsigned char, clk_div, 0xFF);
+ clk_ctl |= clk_div;
+ clk_ctl |= CLK_E;
+ host->clk_div = clk_div;
+ } else
+ sdh_stop_clock(host);
+
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+#ifdef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+ pwr_ctl |= ROD_CTL;
+#else
+ pwr_ctl |= SD_CMD_OD | ROD_CTL;
+#endif
+
+ if (ios->bus_width == MMC_BUS_WIDTH_4) {
+ cfg = bfin_read_SDH_CFG();
+ cfg &= ~PD_SDDAT3;
+ cfg |= PUP_SDDAT3;
+ /* Enable 4 bit SDIO */
+ cfg |= (SD4E | MWE);
+ bfin_write_SDH_CFG(cfg);
+ clk_ctl |= WIDE_BUS;
+ } else {
+ cfg = bfin_read_SDH_CFG();
+ cfg |= MWE;
+ bfin_write_SDH_CFG(cfg);
+ }
+
+ bfin_write_SDH_CLK_CTL(clk_ctl);
+
+ host->power_mode = ios->power_mode;
+ if (ios->power_mode == MMC_POWER_ON)
+ pwr_ctl |= PWR_ON;
+
+ bfin_write_SDH_PWR_CTL(pwr_ctl);
+ SSYNC();
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ dev_dbg(mmc_dev(host->mmc), "SDH: clk_div = 0x%x actual clock:%ld expected clock:%d\n",
+ host->clk_div,
+ host->clk_div ? get_sclk() / (2 * (host->clk_div + 1)) : 0,
+ ios->clock);
+}
+
+static const struct mmc_host_ops sdh_ops = {
+ .request = sdh_request,
+ .set_ios = sdh_set_ios,
+};
+
+static irqreturn_t sdh_dma_irq(int irq, void *devid)
+{
+ struct sdh_host *host = devid;
+
+ dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04x\n", __func__,
+ get_dma_curr_irqstat(host->dma_ch));
+ clear_dma_irqstat(host->dma_ch);
+ SSYNC();
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sdh_stat_irq(int irq, void *devid)
+{
+ struct sdh_host *host = devid;
+ unsigned int status;
+ int handled = 0;
+
+ dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__);
+ status = bfin_read_SDH_E_STATUS();
+ if (status & SD_CARD_DET) {
+ mmc_detect_change(host->mmc, 0);
+ bfin_write_SDH_E_STATUS(SD_CARD_DET);
+ }
+ status = bfin_read_SDH_STATUS();
+ if (status & (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT | CMD_CRC_FAIL)) {
+ handled |= sdh_cmd_done(host, status);
+ bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT | \
+ CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
+ SSYNC();
+ }
+
+ status = bfin_read_SDH_STATUS();
+ if (status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN))
+ handled |= sdh_data_done(host, status);
+
+ dev_dbg(mmc_dev(host->mmc), "%s exit\n\n", __func__);
+
+ return IRQ_RETVAL(handled);
+}
+
+static int __devinit sdh_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct sdh_host *host;
+ struct bfin_sd_host *drv_data = get_sdh_data(pdev);
+ int ret;
+
+ if (!drv_data) {
+ dev_err(&pdev->dev, "missing platform driver data\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ mmc = mmc_alloc_host(sizeof(*mmc), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mmc->ops = &sdh_ops;
+ mmc->max_phys_segs = 32;
+ mmc->max_seg_size = 1 << 16;
+ mmc->max_blk_size = 1 << 11;
+ mmc->max_blk_count = 1 << 11;
+ mmc->max_req_size = PAGE_SIZE;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->f_max = get_sclk();
+ mmc->f_min = mmc->f_max >> 9;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL;
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ spin_lock_init(&host->lock);
+ host->irq = drv_data->irq_int0;
+ host->dma_ch = drv_data->dma_chan;
+
+ ret = request_dma(host->dma_ch, DRIVER_NAME "DMA");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request DMA channel\n");
+ goto out1;
+ }
+
+ ret = set_dma_callback(host->dma_ch, sdh_dma_irq, host);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request DMA irq\n");
+ goto out2;
+ }
+
+ host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
+ if (host->sg_cpu == NULL) {
+ ret = -ENOMEM;
+ goto out2;
+ }
+
+ platform_set_drvdata(pdev, mmc);
+ mmc_add_host(mmc);
+
+ ret = request_irq(host->irq, sdh_stat_irq, 0, "SDH Status IRQ", host);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request status irq\n");
+ goto out3;
+ }
+
+ ret = peripheral_request_list(drv_data->pin_req, DRIVER_NAME);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request peripheral pins\n");
+ goto out4;
+ }
+#if defined(CONFIG_BF54x)
+ /* Secure Digital Host shares DMA with Nand controller */
+ bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
+#endif
+
+ bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
+ SSYNC();
+
+ /* Disable card inserting detection pin. set MMC_CAP_NEES_POLL, and
+ * mmc stack will do the detection.
+ */
+ bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
+ SSYNC();
+
+ return 0;
+
+out4:
+ free_irq(host->irq, host);
+out3:
+ mmc_remove_host(mmc);
+ dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+out2:
+ free_dma(host->dma_ch);
+out1:
+ mmc_free_host(mmc);
+ out:
+ return ret;
+}
+
+static int __devexit sdh_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (mmc) {
+ struct sdh_host *host = mmc_priv(mmc);
+
+ mmc_remove_host(mmc);
+
+ sdh_stop_clock(host);
+ free_irq(host->irq, host);
+ free_dma(host->dma_ch);
+ dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+
+ mmc_free_host(mmc);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sdh_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct bfin_sd_host *drv_data = get_sdh_data(dev);
+ int ret = 0;
+
+ if (mmc)
+ ret = mmc_suspend_host(mmc, state);
+
+ bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() & ~PWR_ON);
+ peripheral_free_list(drv_data->pin_req);
+
+ return ret;
+}
+
+static int sdh_resume(struct platform_device *dev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct bfin_sd_host *drv_data = get_sdh_data(dev);
+ int ret = 0;
+
+ ret = peripheral_request_list(drv_data->pin_req, DRIVER_NAME);
+ if (ret) {
+ dev_err(&dev->dev, "unable to request peripheral pins\n");
+ return ret;
+ }
+
+ bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() | PWR_ON);
+#if defined(CONFIG_BF54x)
+ /* Secure Digital Host shares DMA with Nand controller */
+ bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
+#endif
+ bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
+ SSYNC();
+
+ bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
+ SSYNC();
+
+ if (mmc)
+ ret = mmc_resume_host(mmc);
+
+ return ret;
+}
+#else
+# define sdh_suspend NULL
+# define sdh_resume NULL
+#endif
+
+static struct platform_driver sdh_driver = {
+ .probe = sdh_probe,
+ .remove = __devexit_p(sdh_remove),
+ .suspend = sdh_suspend,
+ .resume = sdh_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init sdh_init(void)
+{
+ return platform_driver_register(&sdh_driver);
+}
+module_init(sdh_init);
+
+static void __exit sdh_exit(void)
+{
+ platform_driver_unregister(&sdh_driver);
+}
+module_exit(sdh_exit);
+
+MODULE_DESCRIPTION("Blackfin Secure Digital Host Driver");
+MODULE_AUTHOR("Cliff Cai, Roy Huang");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
new file mode 100644
index 00000000000..dd45e7c3517
--- /dev/null
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -0,0 +1,1349 @@
+/*
+ * davinci_mmc.c - TI DaVinci MMC/SD/SDIO driver
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Original author: Purushotam Kumar
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/cpufreq.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/mmc.h>
+
+#include <mach/mmc.h>
+#include <mach/edma.h>
+
+/*
+ * Register Definitions
+ */
+#define DAVINCI_MMCCTL 0x00 /* Control Register */
+#define DAVINCI_MMCCLK 0x04 /* Memory Clock Control Register */
+#define DAVINCI_MMCST0 0x08 /* Status Register 0 */
+#define DAVINCI_MMCST1 0x0C /* Status Register 1 */
+#define DAVINCI_MMCIM 0x10 /* Interrupt Mask Register */
+#define DAVINCI_MMCTOR 0x14 /* Response Time-Out Register */
+#define DAVINCI_MMCTOD 0x18 /* Data Read Time-Out Register */
+#define DAVINCI_MMCBLEN 0x1C /* Block Length Register */
+#define DAVINCI_MMCNBLK 0x20 /* Number of Blocks Register */
+#define DAVINCI_MMCNBLC 0x24 /* Number of Blocks Counter Register */
+#define DAVINCI_MMCDRR 0x28 /* Data Receive Register */
+#define DAVINCI_MMCDXR 0x2C /* Data Transmit Register */
+#define DAVINCI_MMCCMD 0x30 /* Command Register */
+#define DAVINCI_MMCARGHL 0x34 /* Argument Register */
+#define DAVINCI_MMCRSP01 0x38 /* Response Register 0 and 1 */
+#define DAVINCI_MMCRSP23 0x3C /* Response Register 0 and 1 */
+#define DAVINCI_MMCRSP45 0x40 /* Response Register 0 and 1 */
+#define DAVINCI_MMCRSP67 0x44 /* Response Register 0 and 1 */
+#define DAVINCI_MMCDRSP 0x48 /* Data Response Register */
+#define DAVINCI_MMCETOK 0x4C
+#define DAVINCI_MMCCIDX 0x50 /* Command Index Register */
+#define DAVINCI_MMCCKC 0x54
+#define DAVINCI_MMCTORC 0x58
+#define DAVINCI_MMCTODC 0x5C
+#define DAVINCI_MMCBLNC 0x60
+#define DAVINCI_SDIOCTL 0x64
+#define DAVINCI_SDIOST0 0x68
+#define DAVINCI_SDIOEN 0x6C
+#define DAVINCI_SDIOST 0x70
+#define DAVINCI_MMCFIFOCTL 0x74 /* FIFO Control Register */
+
+/* DAVINCI_MMCCTL definitions */
+#define MMCCTL_DATRST (1 << 0)
+#define MMCCTL_CMDRST (1 << 1)
+#define MMCCTL_WIDTH_4_BIT (1 << 2)
+#define MMCCTL_DATEG_DISABLED (0 << 6)
+#define MMCCTL_DATEG_RISING (1 << 6)
+#define MMCCTL_DATEG_FALLING (2 << 6)
+#define MMCCTL_DATEG_BOTH (3 << 6)
+#define MMCCTL_PERMDR_LE (0 << 9)
+#define MMCCTL_PERMDR_BE (1 << 9)
+#define MMCCTL_PERMDX_LE (0 << 10)
+#define MMCCTL_PERMDX_BE (1 << 10)
+
+/* DAVINCI_MMCCLK definitions */
+#define MMCCLK_CLKEN (1 << 8)
+#define MMCCLK_CLKRT_MASK (0xFF << 0)
+
+/* IRQ bit definitions, for DAVINCI_MMCST0 and DAVINCI_MMCIM */
+#define MMCST0_DATDNE BIT(0) /* data done */
+#define MMCST0_BSYDNE BIT(1) /* busy done */
+#define MMCST0_RSPDNE BIT(2) /* command done */
+#define MMCST0_TOUTRD BIT(3) /* data read timeout */
+#define MMCST0_TOUTRS BIT(4) /* command response timeout */
+#define MMCST0_CRCWR BIT(5) /* data write CRC error */
+#define MMCST0_CRCRD BIT(6) /* data read CRC error */
+#define MMCST0_CRCRS BIT(7) /* command response CRC error */
+#define MMCST0_DXRDY BIT(9) /* data transmit ready (fifo empty) */
+#define MMCST0_DRRDY BIT(10) /* data receive ready (data in fifo)*/
+#define MMCST0_DATED BIT(11) /* DAT3 edge detect */
+#define MMCST0_TRNDNE BIT(12) /* transfer done */
+
+/* DAVINCI_MMCST1 definitions */
+#define MMCST1_BUSY (1 << 0)
+
+/* DAVINCI_MMCCMD definitions */
+#define MMCCMD_CMD_MASK (0x3F << 0)
+#define MMCCMD_PPLEN (1 << 7)
+#define MMCCMD_BSYEXP (1 << 8)
+#define MMCCMD_RSPFMT_MASK (3 << 9)
+#define MMCCMD_RSPFMT_NONE (0 << 9)
+#define MMCCMD_RSPFMT_R1456 (1 << 9)
+#define MMCCMD_RSPFMT_R2 (2 << 9)
+#define MMCCMD_RSPFMT_R3 (3 << 9)
+#define MMCCMD_DTRW (1 << 11)
+#define MMCCMD_STRMTP (1 << 12)
+#define MMCCMD_WDATX (1 << 13)
+#define MMCCMD_INITCK (1 << 14)
+#define MMCCMD_DCLR (1 << 15)
+#define MMCCMD_DMATRIG (1 << 16)
+
+/* DAVINCI_MMCFIFOCTL definitions */
+#define MMCFIFOCTL_FIFORST (1 << 0)
+#define MMCFIFOCTL_FIFODIR_WR (1 << 1)
+#define MMCFIFOCTL_FIFODIR_RD (0 << 1)
+#define MMCFIFOCTL_FIFOLEV (1 << 2) /* 0 = 128 bits, 1 = 256 bits */
+#define MMCFIFOCTL_ACCWD_4 (0 << 3) /* access width of 4 bytes */
+#define MMCFIFOCTL_ACCWD_3 (1 << 3) /* access width of 3 bytes */
+#define MMCFIFOCTL_ACCWD_2 (2 << 3) /* access width of 2 bytes */
+#define MMCFIFOCTL_ACCWD_1 (3 << 3) /* access width of 1 byte */
+
+
+/* MMCSD Init clock in Hz in opendrain mode */
+#define MMCSD_INIT_CLOCK 200000
+
+/*
+ * One scatterlist dma "segment" is at most MAX_CCNT rw_threshold units,
+ * and we handle up to NR_SG segments. MMC_BLOCK_BOUNCE kicks in only
+ * for drivers with max_hw_segs == 1, making the segments bigger (64KB)
+ * than the page or two that's otherwise typical. NR_SG == 16 gives at
+ * least the same throughput boost, using EDMA transfer linkage instead
+ * of spending CPU time copying pages.
+ */
+#define MAX_CCNT ((1 << 16) - 1)
+
+#define NR_SG 16
+
+static unsigned rw_threshold = 32;
+module_param(rw_threshold, uint, S_IRUGO);
+MODULE_PARM_DESC(rw_threshold,
+ "Read/Write threshold. Default = 32");
+
+static unsigned __initdata use_dma = 1;
+module_param(use_dma, uint, 0);
+MODULE_PARM_DESC(use_dma, "Whether to use DMA or not. Default = 1");
+
+struct mmc_davinci_host {
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ struct mmc_host *mmc;
+ struct clk *clk;
+ unsigned int mmc_input_clk;
+ void __iomem *base;
+ struct resource *mem_res;
+ int irq;
+ unsigned char bus_mode;
+
+#define DAVINCI_MMC_DATADIR_NONE 0
+#define DAVINCI_MMC_DATADIR_READ 1
+#define DAVINCI_MMC_DATADIR_WRITE 2
+ unsigned char data_dir;
+
+ /* buffer is used during PIO of one scatterlist segment, and
+ * is updated along with buffer_bytes_left. bytes_left applies
+ * to all N blocks of the PIO transfer.
+ */
+ u8 *buffer;
+ u32 buffer_bytes_left;
+ u32 bytes_left;
+
+ u32 rxdma, txdma;
+ bool use_dma;
+ bool do_dma;
+
+ /* Scatterlist DMA uses one or more parameter RAM entries:
+ * the main one (associated with rxdma or txdma) plus zero or
+ * more links. The entries for a given transfer differ only
+ * by memory buffer (address, length) and link field.
+ */
+ struct edmacc_param tx_template;
+ struct edmacc_param rx_template;
+ unsigned n_link;
+ u32 links[NR_SG - 1];
+
+ /* For PIO we walk scatterlists one segment at a time. */
+ unsigned int sg_len;
+ struct scatterlist *sg;
+
+ /* Version of the MMC/SD controller */
+ u8 version;
+ /* for ns in one cycle calculation */
+ unsigned ns_in_one_cycle;
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
+};
+
+
+/* PIO only */
+static void mmc_davinci_sg_to_buf(struct mmc_davinci_host *host)
+{
+ host->buffer_bytes_left = sg_dma_len(host->sg);
+ host->buffer = sg_virt(host->sg);
+ if (host->buffer_bytes_left > host->bytes_left)
+ host->buffer_bytes_left = host->bytes_left;
+}
+
+static void davinci_fifo_data_trans(struct mmc_davinci_host *host,
+ unsigned int n)
+{
+ u8 *p;
+ unsigned int i;
+
+ if (host->buffer_bytes_left == 0) {
+ host->sg = sg_next(host->data->sg);
+ mmc_davinci_sg_to_buf(host);
+ }
+
+ p = host->buffer;
+ if (n > host->buffer_bytes_left)
+ n = host->buffer_bytes_left;
+ host->buffer_bytes_left -= n;
+ host->bytes_left -= n;
+
+ /* NOTE: we never transfer more than rw_threshold bytes
+ * to/from the fifo here; there's no I/O overlap.
+ * This also assumes that access width( i.e. ACCWD) is 4 bytes
+ */
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+ for (i = 0; i < (n >> 2); i++) {
+ writel(*((u32 *)p), host->base + DAVINCI_MMCDXR);
+ p = p + 4;
+ }
+ if (n & 3) {
+ iowrite8_rep(host->base + DAVINCI_MMCDXR, p, (n & 3));
+ p = p + (n & 3);
+ }
+ } else {
+ for (i = 0; i < (n >> 2); i++) {
+ *((u32 *)p) = readl(host->base + DAVINCI_MMCDRR);
+ p = p + 4;
+ }
+ if (n & 3) {
+ ioread8_rep(host->base + DAVINCI_MMCDRR, p, (n & 3));
+ p = p + (n & 3);
+ }
+ }
+ host->buffer = p;
+}
+
+static void mmc_davinci_start_command(struct mmc_davinci_host *host,
+ struct mmc_command *cmd)
+{
+ u32 cmd_reg = 0;
+ u32 im_val;
+
+ dev_dbg(mmc_dev(host->mmc), "CMD%d, arg 0x%08x%s\n",
+ cmd->opcode, cmd->arg,
+ ({ char *s;
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_R1:
+ s = ", R1/R5/R6/R7 response";
+ break;
+ case MMC_RSP_R1B:
+ s = ", R1b response";
+ break;
+ case MMC_RSP_R2:
+ s = ", R2 response";
+ break;
+ case MMC_RSP_R3:
+ s = ", R3/R4 response";
+ break;
+ default:
+ s = ", (R? response)";
+ break;
+ }; s; }));
+ host->cmd = cmd;
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_R1B:
+ /* There's some spec confusion about when R1B is
+ * allowed, but if the card doesn't issue a BUSY
+ * then it's harmless for us to allow it.
+ */
+ cmd_reg |= MMCCMD_BSYEXP;
+ /* FALLTHROUGH */
+ case MMC_RSP_R1: /* 48 bits, CRC */
+ cmd_reg |= MMCCMD_RSPFMT_R1456;
+ break;
+ case MMC_RSP_R2: /* 136 bits, CRC */
+ cmd_reg |= MMCCMD_RSPFMT_R2;
+ break;
+ case MMC_RSP_R3: /* 48 bits, no CRC */
+ cmd_reg |= MMCCMD_RSPFMT_R3;
+ break;
+ default:
+ cmd_reg |= MMCCMD_RSPFMT_NONE;
+ dev_dbg(mmc_dev(host->mmc), "unknown resp_type %04x\n",
+ mmc_resp_type(cmd));
+ break;
+ }
+
+ /* Set command index */
+ cmd_reg |= cmd->opcode;
+
+ /* Enable EDMA transfer triggers */
+ if (host->do_dma)
+ cmd_reg |= MMCCMD_DMATRIG;
+
+ if (host->version == MMC_CTLR_VERSION_2 && host->data != NULL &&
+ host->data_dir == DAVINCI_MMC_DATADIR_READ)
+ cmd_reg |= MMCCMD_DMATRIG;
+
+ /* Setting whether command involves data transfer or not */
+ if (cmd->data)
+ cmd_reg |= MMCCMD_WDATX;
+
+ /* Setting whether stream or block transfer */
+ if (cmd->flags & MMC_DATA_STREAM)
+ cmd_reg |= MMCCMD_STRMTP;
+
+ /* Setting whether data read or write */
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE)
+ cmd_reg |= MMCCMD_DTRW;
+
+ if (host->bus_mode == MMC_BUSMODE_PUSHPULL)
+ cmd_reg |= MMCCMD_PPLEN;
+
+ /* set Command timeout */
+ writel(0x1FFF, host->base + DAVINCI_MMCTOR);
+
+ /* Enable interrupt (calculate here, defer until FIFO is stuffed). */
+ im_val = MMCST0_RSPDNE | MMCST0_CRCRS | MMCST0_TOUTRS;
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+ im_val |= MMCST0_DATDNE | MMCST0_CRCWR;
+
+ if (!host->do_dma)
+ im_val |= MMCST0_DXRDY;
+ } else if (host->data_dir == DAVINCI_MMC_DATADIR_READ) {
+ im_val |= MMCST0_DATDNE | MMCST0_CRCRD | MMCST0_TOUTRD;
+
+ if (!host->do_dma)
+ im_val |= MMCST0_DRRDY;
+ }
+
+ /*
+ * Before non-DMA WRITE commands the controller needs priming:
+ * FIFO should be populated with 32 bytes i.e. whatever is the FIFO size
+ */
+ if (!host->do_dma && (host->data_dir == DAVINCI_MMC_DATADIR_WRITE))
+ davinci_fifo_data_trans(host, rw_threshold);
+
+ writel(cmd->arg, host->base + DAVINCI_MMCARGHL);
+ writel(cmd_reg, host->base + DAVINCI_MMCCMD);
+ writel(im_val, host->base + DAVINCI_MMCIM);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* DMA infrastructure */
+
+static void davinci_abort_dma(struct mmc_davinci_host *host)
+{
+ int sync_dev;
+
+ if (host->data_dir == DAVINCI_MMC_DATADIR_READ)
+ sync_dev = host->rxdma;
+ else
+ sync_dev = host->txdma;
+
+ edma_stop(sync_dev);
+ edma_clean_channel(sync_dev);
+}
+
+static void
+mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data);
+
+static void mmc_davinci_dma_cb(unsigned channel, u16 ch_status, void *data)
+{
+ if (DMA_COMPLETE != ch_status) {
+ struct mmc_davinci_host *host = data;
+
+ /* Currently means: DMA Event Missed, or "null" transfer
+ * request was seen. In the future, TC errors (like bad
+ * addresses) might be presented too.
+ */
+ dev_warn(mmc_dev(host->mmc), "DMA %s error\n",
+ (host->data->flags & MMC_DATA_WRITE)
+ ? "write" : "read");
+ host->data->error = -EIO;
+ mmc_davinci_xfer_done(host, host->data);
+ }
+}
+
+/* Set up tx or rx template, to be modified and updated later */
+static void __init mmc_davinci_dma_setup(struct mmc_davinci_host *host,
+ bool tx, struct edmacc_param *template)
+{
+ unsigned sync_dev;
+ const u16 acnt = 4;
+ const u16 bcnt = rw_threshold >> 2;
+ const u16 ccnt = 0;
+ u32 src_port = 0;
+ u32 dst_port = 0;
+ s16 src_bidx, dst_bidx;
+ s16 src_cidx, dst_cidx;
+
+ /*
+ * A-B Sync transfer: each DMA request is for one "frame" of
+ * rw_threshold bytes, broken into "acnt"-size chunks repeated
+ * "bcnt" times. Each segment needs "ccnt" such frames; since
+ * we tell the block layer our mmc->max_seg_size limit, we can
+ * trust (later) that it's within bounds.
+ *
+ * The FIFOs are read/written in 4-byte chunks (acnt == 4) and
+ * EDMA will optimize memory operations to use larger bursts.
+ */
+ if (tx) {
+ sync_dev = host->txdma;
+
+ /* src_prt, ccnt, and link to be set up later */
+ src_bidx = acnt;
+ src_cidx = acnt * bcnt;
+
+ dst_port = host->mem_res->start + DAVINCI_MMCDXR;
+ dst_bidx = 0;
+ dst_cidx = 0;
+ } else {
+ sync_dev = host->rxdma;
+
+ src_port = host->mem_res->start + DAVINCI_MMCDRR;
+ src_bidx = 0;
+ src_cidx = 0;
+
+ /* dst_prt, ccnt, and link to be set up later */
+ dst_bidx = acnt;
+ dst_cidx = acnt * bcnt;
+ }
+
+ /*
+ * We can't use FIFO mode for the FIFOs because MMC FIFO addresses
+ * are not 256-bit (32-byte) aligned. So we use INCR, and the W8BIT
+ * parameter is ignored.
+ */
+ edma_set_src(sync_dev, src_port, INCR, W8BIT);
+ edma_set_dest(sync_dev, dst_port, INCR, W8BIT);
+
+ edma_set_src_index(sync_dev, src_bidx, src_cidx);
+ edma_set_dest_index(sync_dev, dst_bidx, dst_cidx);
+
+ edma_set_transfer_params(sync_dev, acnt, bcnt, ccnt, 8, ABSYNC);
+
+ edma_read_slot(sync_dev, template);
+
+ /* don't bother with irqs or chaining */
+ template->opt |= EDMA_CHAN_SLOT(sync_dev) << 12;
+}
+
+static void mmc_davinci_send_dma_request(struct mmc_davinci_host *host,
+ struct mmc_data *data)
+{
+ struct edmacc_param *template;
+ int channel, slot;
+ unsigned link;
+ struct scatterlist *sg;
+ unsigned sg_len;
+ unsigned bytes_left = host->bytes_left;
+ const unsigned shift = ffs(rw_threshold) - 1;;
+
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+ template = &host->tx_template;
+ channel = host->txdma;
+ } else {
+ template = &host->rx_template;
+ channel = host->rxdma;
+ }
+
+ /* We know sg_len and ccnt will never be out of range because
+ * we told the mmc layer which in turn tells the block layer
+ * to ensure that it only hands us one scatterlist segment
+ * per EDMA PARAM entry. Update the PARAM
+ * entries needed for each segment of this scatterlist.
+ */
+ for (slot = channel, link = 0, sg = data->sg, sg_len = host->sg_len;
+ sg_len-- != 0 && bytes_left;
+ sg = sg_next(sg), slot = host->links[link++]) {
+ u32 buf = sg_dma_address(sg);
+ unsigned count = sg_dma_len(sg);
+
+ template->link_bcntrld = sg_len
+ ? (EDMA_CHAN_SLOT(host->links[link]) << 5)
+ : 0xffff;
+
+ if (count > bytes_left)
+ count = bytes_left;
+ bytes_left -= count;
+
+ if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE)
+ template->src = buf;
+ else
+ template->dst = buf;
+ template->ccnt = count >> shift;
+
+ edma_write_slot(slot, template);
+ }
+
+ if (host->version == MMC_CTLR_VERSION_2)
+ edma_clear_event(channel);
+
+ edma_start(channel);
+}
+
+static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host,
+ struct mmc_data *data)
+{
+ int i;
+ int mask = rw_threshold - 1;
+
+ host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_WRITE)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE));
+
+ /* no individual DMA segment should need a partial FIFO */
+ for (i = 0; i < host->sg_len; i++) {
+ if (sg_dma_len(data->sg + i) & mask) {
+ dma_unmap_sg(mmc_dev(host->mmc),
+ data->sg, data->sg_len,
+ (data->flags & MMC_DATA_WRITE)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ return -1;
+ }
+ }
+
+ host->do_dma = 1;
+ mmc_davinci_send_dma_request(host, data);
+
+ return 0;
+}
+
+static void __init_or_module
+davinci_release_dma_channels(struct mmc_davinci_host *host)
+{
+ unsigned i;
+
+ if (!host->use_dma)
+ return;
+
+ for (i = 0; i < host->n_link; i++)
+ edma_free_slot(host->links[i]);
+
+ edma_free_channel(host->txdma);
+ edma_free_channel(host->rxdma);
+}
+
+static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host)
+{
+ int r, i;
+
+ /* Acquire master DMA write channel */
+ r = edma_alloc_channel(host->txdma, mmc_davinci_dma_cb, host,
+ EVENTQ_DEFAULT);
+ if (r < 0) {
+ dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n",
+ "tx", r);
+ return r;
+ }
+ mmc_davinci_dma_setup(host, true, &host->tx_template);
+
+ /* Acquire master DMA read channel */
+ r = edma_alloc_channel(host->rxdma, mmc_davinci_dma_cb, host,
+ EVENTQ_DEFAULT);
+ if (r < 0) {
+ dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n",
+ "rx", r);
+ goto free_master_write;
+ }
+ mmc_davinci_dma_setup(host, false, &host->rx_template);
+
+ /* Allocate parameter RAM slots, which will later be bound to a
+ * channel as needed to handle a scatterlist.
+ */
+ for (i = 0; i < ARRAY_SIZE(host->links); i++) {
+ r = edma_alloc_slot(EDMA_CTLR(host->txdma), EDMA_SLOT_ANY);
+ if (r < 0) {
+ dev_dbg(mmc_dev(host->mmc), "dma PaRAM alloc --> %d\n",
+ r);
+ break;
+ }
+ host->links[i] = r;
+ }
+ host->n_link = i;
+
+ return 0;
+
+free_master_write:
+ edma_free_channel(host->txdma);
+
+ return r;
+}
+
+/*----------------------------------------------------------------------*/
+
+static void
+mmc_davinci_prepare_data(struct mmc_davinci_host *host, struct mmc_request *req)
+{
+ int fifo_lev = (rw_threshold == 32) ? MMCFIFOCTL_FIFOLEV : 0;
+ int timeout;
+ struct mmc_data *data = req->data;
+
+ if (host->version == MMC_CTLR_VERSION_2)
+ fifo_lev = (rw_threshold == 64) ? MMCFIFOCTL_FIFOLEV : 0;
+
+ host->data = data;
+ if (data == NULL) {
+ host->data_dir = DAVINCI_MMC_DATADIR_NONE;
+ writel(0, host->base + DAVINCI_MMCBLEN);
+ writel(0, host->base + DAVINCI_MMCNBLK);
+ return;
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "%s %s, %d blocks of %d bytes\n",
+ (data->flags & MMC_DATA_STREAM) ? "stream" : "block",
+ (data->flags & MMC_DATA_WRITE) ? "write" : "read",
+ data->blocks, data->blksz);
+ dev_dbg(mmc_dev(host->mmc), " DTO %d cycles + %d ns\n",
+ data->timeout_clks, data->timeout_ns);
+ timeout = data->timeout_clks +
+ (data->timeout_ns / host->ns_in_one_cycle);
+ if (timeout > 0xffff)
+ timeout = 0xffff;
+
+ writel(timeout, host->base + DAVINCI_MMCTOD);
+ writel(data->blocks, host->base + DAVINCI_MMCNBLK);
+ writel(data->blksz, host->base + DAVINCI_MMCBLEN);
+
+ /* Configure the FIFO */
+ switch (data->flags & MMC_DATA_WRITE) {
+ case MMC_DATA_WRITE:
+ host->data_dir = DAVINCI_MMC_DATADIR_WRITE;
+ writel(fifo_lev | MMCFIFOCTL_FIFODIR_WR | MMCFIFOCTL_FIFORST,
+ host->base + DAVINCI_MMCFIFOCTL);
+ writel(fifo_lev | MMCFIFOCTL_FIFODIR_WR,
+ host->base + DAVINCI_MMCFIFOCTL);
+ break;
+
+ default:
+ host->data_dir = DAVINCI_MMC_DATADIR_READ;
+ writel(fifo_lev | MMCFIFOCTL_FIFODIR_RD | MMCFIFOCTL_FIFORST,
+ host->base + DAVINCI_MMCFIFOCTL);
+ writel(fifo_lev | MMCFIFOCTL_FIFODIR_RD,
+ host->base + DAVINCI_MMCFIFOCTL);
+ break;
+ }
+
+ host->buffer = NULL;
+ host->bytes_left = data->blocks * data->blksz;
+
+ /* For now we try to use DMA whenever we won't need partial FIFO
+ * reads or writes, either for the whole transfer (as tested here)
+ * or for any individual scatterlist segment (tested when we call
+ * start_dma_transfer).
+ *
+ * While we *could* change that, unusual block sizes are rarely
+ * used. The occasional fallback to PIO should't hurt.
+ */
+ if (host->use_dma && (host->bytes_left & (rw_threshold - 1)) == 0
+ && mmc_davinci_start_dma_transfer(host, data) == 0) {
+ /* zero this to ensure we take no PIO paths */
+ host->bytes_left = 0;
+ } else {
+ /* Revert to CPU Copy */
+ host->sg_len = data->sg_len;
+ host->sg = host->data->sg;
+ mmc_davinci_sg_to_buf(host);
+ }
+}
+
+static void mmc_davinci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+ struct mmc_davinci_host *host = mmc_priv(mmc);
+ unsigned long timeout = jiffies + msecs_to_jiffies(900);
+ u32 mmcst1 = 0;
+
+ /* Card may still be sending BUSY after a previous operation,
+ * typically some kind of write. If so, we can't proceed yet.
+ */
+ while (time_before(jiffies, timeout)) {
+ mmcst1 = readl(host->base + DAVINCI_MMCST1);
+ if (!(mmcst1 & MMCST1_BUSY))
+ break;
+ cpu_relax();
+ }
+ if (mmcst1 & MMCST1_BUSY) {
+ dev_err(mmc_dev(host->mmc), "still BUSY? bad ... \n");
+ req->cmd->error = -ETIMEDOUT;
+ mmc_request_done(mmc, req);
+ return;
+ }
+
+ host->do_dma = 0;
+ mmc_davinci_prepare_data(host, req);
+ mmc_davinci_start_command(host, req->cmd);
+}
+
+static unsigned int calculate_freq_for_card(struct mmc_davinci_host *host,
+ unsigned int mmc_req_freq)
+{
+ unsigned int mmc_freq = 0, mmc_pclk = 0, mmc_push_pull_divisor = 0;
+
+ mmc_pclk = host->mmc_input_clk;
+ if (mmc_req_freq && mmc_pclk > (2 * mmc_req_freq))
+ mmc_push_pull_divisor = ((unsigned int)mmc_pclk
+ / (2 * mmc_req_freq)) - 1;
+ else
+ mmc_push_pull_divisor = 0;
+
+ mmc_freq = (unsigned int)mmc_pclk
+ / (2 * (mmc_push_pull_divisor + 1));
+
+ if (mmc_freq > mmc_req_freq)
+ mmc_push_pull_divisor = mmc_push_pull_divisor + 1;
+ /* Convert ns to clock cycles */
+ if (mmc_req_freq <= 400000)
+ host->ns_in_one_cycle = (1000000) / (((mmc_pclk
+ / (2 * (mmc_push_pull_divisor + 1)))/1000));
+ else
+ host->ns_in_one_cycle = (1000000) / (((mmc_pclk
+ / (2 * (mmc_push_pull_divisor + 1)))/1000000));
+
+ return mmc_push_pull_divisor;
+}
+
+static void calculate_clk_divider(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ unsigned int open_drain_freq = 0, mmc_pclk = 0;
+ unsigned int mmc_push_pull_freq = 0;
+ struct mmc_davinci_host *host = mmc_priv(mmc);
+
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+ u32 temp;
+
+ /* Ignoring the init clock value passed for fixing the inter
+ * operability with different cards.
+ */
+ open_drain_freq = ((unsigned int)mmc_pclk
+ / (2 * MMCSD_INIT_CLOCK)) - 1;
+
+ if (open_drain_freq > 0xFF)
+ open_drain_freq = 0xFF;
+
+ temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKRT_MASK;
+ temp |= open_drain_freq;
+ writel(temp, host->base + DAVINCI_MMCCLK);
+
+ /* Convert ns to clock cycles */
+ host->ns_in_one_cycle = (1000000) / (MMCSD_INIT_CLOCK/1000);
+ } else {
+ u32 temp;
+ mmc_push_pull_freq = calculate_freq_for_card(host, ios->clock);
+
+ if (mmc_push_pull_freq > 0xFF)
+ mmc_push_pull_freq = 0xFF;
+
+ temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKEN;
+ writel(temp, host->base + DAVINCI_MMCCLK);
+
+ udelay(10);
+
+ temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKRT_MASK;
+ temp |= mmc_push_pull_freq;
+ writel(temp, host->base + DAVINCI_MMCCLK);
+
+ writel(temp | MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK);
+
+ udelay(10);
+ }
+}
+
+static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ unsigned int mmc_pclk = 0;
+ struct mmc_davinci_host *host = mmc_priv(mmc);
+
+ mmc_pclk = host->mmc_input_clk;
+ dev_dbg(mmc_dev(host->mmc),
+ "clock %dHz busmode %d powermode %d Vdd %04x\n",
+ ios->clock, ios->bus_mode, ios->power_mode,
+ ios->vdd);
+ if (ios->bus_width == MMC_BUS_WIDTH_4) {
+ dev_dbg(mmc_dev(host->mmc), "Enabling 4 bit mode\n");
+ writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_WIDTH_4_BIT,
+ host->base + DAVINCI_MMCCTL);
+ } else {
+ dev_dbg(mmc_dev(host->mmc), "Disabling 4 bit mode\n");
+ writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_WIDTH_4_BIT,
+ host->base + DAVINCI_MMCCTL);
+ }
+
+ calculate_clk_divider(mmc, ios);
+
+ host->bus_mode = ios->bus_mode;
+ if (ios->power_mode == MMC_POWER_UP) {
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+ bool lose = true;
+
+ /* Send clock cycles, poll completion */
+ writel(0, host->base + DAVINCI_MMCARGHL);
+ writel(MMCCMD_INITCK, host->base + DAVINCI_MMCCMD);
+ while (time_before(jiffies, timeout)) {
+ u32 tmp = readl(host->base + DAVINCI_MMCST0);
+
+ if (tmp & MMCST0_RSPDNE) {
+ lose = false;
+ break;
+ }
+ cpu_relax();
+ }
+ if (lose)
+ dev_warn(mmc_dev(host->mmc), "powerup timeout\n");
+ }
+
+ /* FIXME on power OFF, reset things ... */
+}
+
+static void
+mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data)
+{
+ host->data = NULL;
+
+ if (host->do_dma) {
+ davinci_abort_dma(host);
+
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ (data->flags & MMC_DATA_WRITE)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ host->do_dma = false;
+ }
+ host->data_dir = DAVINCI_MMC_DATADIR_NONE;
+
+ if (!data->stop || (host->cmd && host->cmd->error)) {
+ mmc_request_done(host->mmc, data->mrq);
+ writel(0, host->base + DAVINCI_MMCIM);
+ } else
+ mmc_davinci_start_command(host, data->stop);
+}
+
+static void mmc_davinci_cmd_done(struct mmc_davinci_host *host,
+ struct mmc_command *cmd)
+{
+ host->cmd = NULL;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ /* response type 2 */
+ cmd->resp[3] = readl(host->base + DAVINCI_MMCRSP01);
+ cmd->resp[2] = readl(host->base + DAVINCI_MMCRSP23);
+ cmd->resp[1] = readl(host->base + DAVINCI_MMCRSP45);
+ cmd->resp[0] = readl(host->base + DAVINCI_MMCRSP67);
+ } else {
+ /* response types 1, 1b, 3, 4, 5, 6 */
+ cmd->resp[0] = readl(host->base + DAVINCI_MMCRSP67);
+ }
+ }
+
+ if (host->data == NULL || cmd->error) {
+ if (cmd->error == -ETIMEDOUT)
+ cmd->mrq->cmd->retries = 0;
+ mmc_request_done(host->mmc, cmd->mrq);
+ writel(0, host->base + DAVINCI_MMCIM);
+ }
+}
+
+static void
+davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data)
+{
+ u32 temp;
+
+ /* reset command and data state machines */
+ temp = readl(host->base + DAVINCI_MMCCTL);
+ writel(temp | MMCCTL_CMDRST | MMCCTL_DATRST,
+ host->base + DAVINCI_MMCCTL);
+
+ temp &= ~(MMCCTL_CMDRST | MMCCTL_DATRST);
+ udelay(10);
+ writel(temp, host->base + DAVINCI_MMCCTL);
+}
+
+static irqreturn_t mmc_davinci_irq(int irq, void *dev_id)
+{
+ struct mmc_davinci_host *host = (struct mmc_davinci_host *)dev_id;
+ unsigned int status, qstatus;
+ int end_command = 0;
+ int end_transfer = 0;
+ struct mmc_data *data = host->data;
+
+ if (host->cmd == NULL && host->data == NULL) {
+ status = readl(host->base + DAVINCI_MMCST0);
+ dev_dbg(mmc_dev(host->mmc),
+ "Spurious interrupt 0x%04x\n", status);
+ /* Disable the interrupt from mmcsd */
+ writel(0, host->base + DAVINCI_MMCIM);
+ return IRQ_NONE;
+ }
+
+ status = readl(host->base + DAVINCI_MMCST0);
+ qstatus = status;
+
+ /* handle FIFO first when using PIO for data.
+ * bytes_left will decrease to zero as I/O progress and status will
+ * read zero over iteration because this controller status
+ * register(MMCST0) reports any status only once and it is cleared
+ * by read. So, it is not unbouned loop even in the case of
+ * non-dma.
+ */
+ while (host->bytes_left && (status & (MMCST0_DXRDY | MMCST0_DRRDY))) {
+ davinci_fifo_data_trans(host, rw_threshold);
+ status = readl(host->base + DAVINCI_MMCST0);
+ if (!status)
+ break;
+ qstatus |= status;
+ }
+
+ if (qstatus & MMCST0_DATDNE) {
+ /* All blocks sent/received, and CRC checks passed */
+ if (data != NULL) {
+ if ((host->do_dma == 0) && (host->bytes_left > 0)) {
+ /* if datasize < rw_threshold
+ * no RX ints are generated
+ */
+ davinci_fifo_data_trans(host, host->bytes_left);
+ }
+ end_transfer = 1;
+ data->bytes_xfered = data->blocks * data->blksz;
+ } else {
+ dev_err(mmc_dev(host->mmc),
+ "DATDNE with no host->data\n");
+ }
+ }
+
+ if (qstatus & MMCST0_TOUTRD) {
+ /* Read data timeout */
+ data->error = -ETIMEDOUT;
+ end_transfer = 1;
+
+ dev_dbg(mmc_dev(host->mmc),
+ "read data timeout, status %x\n",
+ qstatus);
+
+ davinci_abort_data(host, data);
+ }
+
+ if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) {
+ /* Data CRC error */
+ data->error = -EILSEQ;
+ end_transfer = 1;
+
+ /* NOTE: this controller uses CRCWR to report both CRC
+ * errors and timeouts (on writes). MMCDRSP values are
+ * only weakly documented, but 0x9f was clearly a timeout
+ * case and the two three-bit patterns in various SD specs
+ * (101, 010) aren't part of it ...
+ */
+ if (qstatus & MMCST0_CRCWR) {
+ u32 temp = readb(host->base + DAVINCI_MMCDRSP);
+
+ if (temp == 0x9f)
+ data->error = -ETIMEDOUT;
+ }
+ dev_dbg(mmc_dev(host->mmc), "data %s %s error\n",
+ (qstatus & MMCST0_CRCWR) ? "write" : "read",
+ (data->error == -ETIMEDOUT) ? "timeout" : "CRC");
+
+ davinci_abort_data(host, data);
+ }
+
+ if (qstatus & MMCST0_TOUTRS) {
+ /* Command timeout */
+ if (host->cmd) {
+ dev_dbg(mmc_dev(host->mmc),
+ "CMD%d timeout, status %x\n",
+ host->cmd->opcode, qstatus);
+ host->cmd->error = -ETIMEDOUT;
+ if (data) {
+ end_transfer = 1;
+ davinci_abort_data(host, data);
+ } else
+ end_command = 1;
+ }
+ }
+
+ if (qstatus & MMCST0_CRCRS) {
+ /* Command CRC error */
+ dev_dbg(mmc_dev(host->mmc), "Command CRC error\n");
+ if (host->cmd) {
+ host->cmd->error = -EILSEQ;
+ end_command = 1;
+ }
+ }
+
+ if (qstatus & MMCST0_RSPDNE) {
+ /* End of command phase */
+ end_command = (int) host->cmd;
+ }
+
+ if (end_command)
+ mmc_davinci_cmd_done(host, host->cmd);
+ if (end_transfer)
+ mmc_davinci_xfer_done(host, data);
+ return IRQ_HANDLED;
+}
+
+static int mmc_davinci_get_cd(struct mmc_host *mmc)
+{
+ struct platform_device *pdev = to_platform_device(mmc->parent);
+ struct davinci_mmc_config *config = pdev->dev.platform_data;
+
+ if (!config || !config->get_cd)
+ return -ENOSYS;
+ return config->get_cd(pdev->id);
+}
+
+static int mmc_davinci_get_ro(struct mmc_host *mmc)
+{
+ struct platform_device *pdev = to_platform_device(mmc->parent);
+ struct davinci_mmc_config *config = pdev->dev.platform_data;
+
+ if (!config || !config->get_ro)
+ return -ENOSYS;
+ return config->get_ro(pdev->id);
+}
+
+static struct mmc_host_ops mmc_davinci_ops = {
+ .request = mmc_davinci_request,
+ .set_ios = mmc_davinci_set_ios,
+ .get_cd = mmc_davinci_get_cd,
+ .get_ro = mmc_davinci_get_ro,
+};
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_CPU_FREQ
+static int mmc_davinci_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct mmc_davinci_host *host;
+ unsigned int mmc_pclk;
+ struct mmc_host *mmc;
+ unsigned long flags;
+
+ host = container_of(nb, struct mmc_davinci_host, freq_transition);
+ mmc = host->mmc;
+ mmc_pclk = clk_get_rate(host->clk);
+
+ if (val == CPUFREQ_POSTCHANGE) {
+ spin_lock_irqsave(&mmc->lock, flags);
+ host->mmc_input_clk = mmc_pclk;
+ calculate_clk_divider(mmc, &mmc->ios);
+ spin_unlock_irqrestore(&mmc->lock, flags);
+ }
+
+ return 0;
+}
+
+static inline int mmc_davinci_cpufreq_register(struct mmc_davinci_host *host)
+{
+ host->freq_transition.notifier_call = mmc_davinci_cpufreq_transition;
+
+ return cpufreq_register_notifier(&host->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host *host)
+{
+ cpufreq_unregister_notifier(&host->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int mmc_davinci_cpufreq_register(struct mmc_davinci_host *host)
+{
+ return 0;
+}
+
+static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host *host)
+{
+}
+#endif
+static void __init init_mmcsd_host(struct mmc_davinci_host *host)
+{
+ /* DAT line portion is diabled and in reset state */
+ writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_DATRST,
+ host->base + DAVINCI_MMCCTL);
+
+ /* CMD line portion is diabled and in reset state */
+ writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_CMDRST,
+ host->base + DAVINCI_MMCCTL);
+
+ udelay(10);
+
+ writel(0, host->base + DAVINCI_MMCCLK);
+ writel(MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK);
+
+ writel(0x1FFF, host->base + DAVINCI_MMCTOR);
+ writel(0xFFFF, host->base + DAVINCI_MMCTOD);
+
+ writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_DATRST,
+ host->base + DAVINCI_MMCCTL);
+ writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_CMDRST,
+ host->base + DAVINCI_MMCCTL);
+
+ udelay(10);
+}
+
+static int __init davinci_mmcsd_probe(struct platform_device *pdev)
+{
+ struct davinci_mmc_config *pdata = pdev->dev.platform_data;
+ struct mmc_davinci_host *host = NULL;
+ struct mmc_host *mmc = NULL;
+ struct resource *r, *mem = NULL;
+ int ret = 0, irq = 0;
+ size_t mem_size;
+
+ /* REVISIT: when we're fully converted, fail if pdata is NULL */
+
+ ret = -ENODEV;
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!r || irq == NO_IRQ)
+ goto out;
+
+ ret = -EBUSY;
+ mem_size = resource_size(r);
+ mem = request_mem_region(r->start, mem_size, pdev->name);
+ if (!mem)
+ goto out;
+
+ ret = -ENOMEM;
+ mmc = mmc_alloc_host(sizeof(struct mmc_davinci_host), &pdev->dev);
+ if (!mmc)
+ goto out;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc; /* Important */
+
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!r)
+ goto out;
+ host->rxdma = r->start;
+
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!r)
+ goto out;
+ host->txdma = r->start;
+
+ host->mem_res = mem;
+ host->base = ioremap(mem->start, mem_size);
+ if (!host->base)
+ goto out;
+
+ ret = -ENXIO;
+ host->clk = clk_get(&pdev->dev, "MMCSDCLK");
+ if (IS_ERR(host->clk)) {
+ ret = PTR_ERR(host->clk);
+ goto out;
+ }
+ clk_enable(host->clk);
+ host->mmc_input_clk = clk_get_rate(host->clk);
+
+ init_mmcsd_host(host);
+
+ host->use_dma = use_dma;
+ host->irq = irq;
+
+ if (host->use_dma && davinci_acquire_dma_channels(host) != 0)
+ host->use_dma = 0;
+
+ /* REVISIT: someday, support IRQ-driven card detection. */
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
+ if (!pdata || pdata->wires == 4 || pdata->wires == 0)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+ host->version = pdata->version;
+
+ mmc->ops = &mmc_davinci_ops;
+ mmc->f_min = 312500;
+ mmc->f_max = 25000000;
+ if (pdata && pdata->max_freq)
+ mmc->f_max = pdata->max_freq;
+ if (pdata && pdata->caps)
+ mmc->caps |= pdata->caps;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ /* With no iommu coalescing pages, each phys_seg is a hw_seg.
+ * Each hw_seg uses one EDMA parameter RAM slot, always one
+ * channel and then usually some linked slots.
+ */
+ mmc->max_hw_segs = 1 + host->n_link;
+ mmc->max_phys_segs = mmc->max_hw_segs;
+
+ /* EDMA limit per hw segment (one or two MBytes) */
+ mmc->max_seg_size = MAX_CCNT * rw_threshold;
+
+ /* MMC/SD controller limits for multiblock requests */
+ mmc->max_blk_size = 4095; /* BLEN is 12 bits */
+ mmc->max_blk_count = 65535; /* NBLK is 16 bits */
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+
+ dev_dbg(mmc_dev(host->mmc), "max_phys_segs=%d\n", mmc->max_phys_segs);
+ dev_dbg(mmc_dev(host->mmc), "max_hw_segs=%d\n", mmc->max_hw_segs);
+ dev_dbg(mmc_dev(host->mmc), "max_blk_size=%d\n", mmc->max_blk_size);
+ dev_dbg(mmc_dev(host->mmc), "max_req_size=%d\n", mmc->max_req_size);
+ dev_dbg(mmc_dev(host->mmc), "max_seg_size=%d\n", mmc->max_seg_size);
+
+ platform_set_drvdata(pdev, host);
+
+ ret = mmc_davinci_cpufreq_register(host);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register cpufreq\n");
+ goto cpu_freq_fail;
+ }
+
+ ret = mmc_add_host(mmc);
+ if (ret < 0)
+ goto out;
+
+ ret = request_irq(irq, mmc_davinci_irq, 0, mmc_hostname(mmc), host);
+ if (ret)
+ goto out;
+
+ rename_region(mem, mmc_hostname(mmc));
+
+ dev_info(mmc_dev(host->mmc), "Using %s, %d-bit mode\n",
+ host->use_dma ? "DMA" : "PIO",
+ (mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1);
+
+ return 0;
+
+out:
+ mmc_davinci_cpufreq_deregister(host);
+cpu_freq_fail:
+ if (host) {
+ davinci_release_dma_channels(host);
+
+ if (host->clk) {
+ clk_disable(host->clk);
+ clk_put(host->clk);
+ }
+
+ if (host->base)
+ iounmap(host->base);
+ }
+
+ if (mmc)
+ mmc_free_host(mmc);
+
+ if (mem)
+ release_resource(mem);
+
+ dev_dbg(&pdev->dev, "probe err %d\n", ret);
+
+ return ret;
+}
+
+static int __exit davinci_mmcsd_remove(struct platform_device *pdev)
+{
+ struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ if (host) {
+ mmc_davinci_cpufreq_deregister(host);
+
+ mmc_remove_host(host->mmc);
+ free_irq(host->irq, host);
+
+ davinci_release_dma_channels(host);
+
+ clk_disable(host->clk);
+ clk_put(host->clk);
+
+ iounmap(host->base);
+
+ release_resource(host->mem_res);
+
+ mmc_free_host(host->mmc);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int davinci_mmcsd_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+ struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+ return mmc_suspend_host(host->mmc, msg);
+}
+
+static int davinci_mmcsd_resume(struct platform_device *pdev)
+{
+ struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+ return mmc_resume_host(host->mmc);
+}
+#else
+#define davinci_mmcsd_suspend NULL
+#define davinci_mmcsd_resume NULL
+#endif
+
+static struct platform_driver davinci_mmcsd_driver = {
+ .driver = {
+ .name = "davinci_mmc",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(davinci_mmcsd_remove),
+ .suspend = davinci_mmcsd_suspend,
+ .resume = davinci_mmcsd_resume,
+};
+
+static int __init davinci_mmcsd_init(void)
+{
+ return platform_driver_probe(&davinci_mmcsd_driver,
+ davinci_mmcsd_probe);
+}
+module_init(davinci_mmcsd_init);
+
+static void __exit davinci_mmcsd_exit(void)
+{
+ platform_driver_unregister(&davinci_mmcsd_driver);
+}
+module_exit(davinci_mmcsd_exit);
+
+MODULE_AUTHOR("Texas Instruments India");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MMC/SD driver for Davinci MMC controller");
+
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a5894a6b..84c103a7ee1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2,6 +2,7 @@
* linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ * Copyright (C) 2010 ST-Ericsson AB.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -34,9 +35,6 @@
#define DRIVER_NAME "mmci-pl18x"
-#define DBG(host,fmt,args...) \
- pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
-
static unsigned int fmax = 515633;
/*
@@ -56,7 +54,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == 0x80)
+ if (host->hw_designer == AMBA_VENDOR_ST)
clk |= MCI_FCEN; /* Bug fix in ST IP block */
clk |= MCI_CLK_ENABLE;
/* This hasn't proven to be worthwhile */
@@ -105,8 +103,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
void __iomem *base;
int blksz_bits;
- DBG(host, "blksz %04x blks %04x flags %08x\n",
- data->blksz, data->blocks, data->flags);
+ dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n",
+ data->blksz, data->blocks, data->flags);
host->data = data;
host->size = data->blksz;
@@ -155,7 +153,7 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
{
void __iomem *base = host->base;
- DBG(host, "op %02x arg %08x flags %08x\n",
+ dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n",
cmd->opcode, cmd->arg, cmd->flags);
if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
@@ -184,8 +182,20 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
{
if (status & MCI_DATABLOCKEND) {
host->data_xfered += data->blksz;
+#ifdef CONFIG_ARCH_U300
+ /*
+ * On the U300 some signal or other is
+ * badly routed so that a data write does
+ * not properly terminate with a MCI_DATAEND
+ * status flag. This quirk will make writes
+ * work again.
+ */
+ if (data->flags & MMC_DATA_WRITE)
+ status |= MCI_DATAEND;
+#endif
}
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
if (status & MCI_DATACRCFAIL)
data->error = -EILSEQ;
else if (status & MCI_DATATIMEOUT)
@@ -307,7 +317,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
status = readl(base + MMCISTATUS);
- DBG(host, "irq1 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
do {
unsigned long flags;
@@ -401,7 +411,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
status &= readl(host->base + MMCIMASK0);
writel(status, host->base + MMCICLEAR);
- DBG(host, "irq0 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
data = host->data;
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
@@ -428,8 +438,8 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
WARN_ON(host->mrq != NULL);
if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
- printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
- mmc_hostname(mmc), mrq->data->blksz);
+ dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n",
+ mrq->data->blksz);
mrq->cmd->error = -EINVAL;
mmc_request_done(mmc, mrq);
return;
@@ -582,8 +592,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
host->hw_designer = amba_manf(dev);
host->hw_revision = amba_rev(dev);
- DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
- DBG(host, "revision = 0x%01x\n", host->hw_revision);
+ dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
+ dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision);
host->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
@@ -608,7 +618,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
if (ret < 0)
goto clk_disable;
host->mclk = clk_get_rate(host->clk);
- DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+ dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
+ host->mclk);
}
host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
@@ -619,6 +630,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
mmc->ops = &mmci_ops;
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
+ dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");
@@ -712,7 +725,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
mmc_add_host(mmc);
- printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
+ dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index dba4600bcdb..b31946e0b4c 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -38,10 +38,9 @@
#include <asm/div64.h>
#include <asm/sizes.h>
-#include <asm/mach/mmc.h>
+#include <mach/mmc.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
-#include <mach/htc_pwrsink.h>
#include "msm_sdcc.h"
@@ -775,13 +774,11 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_OFF:
- htc_pwrsink_set(PWRSINK_SDCARD, 0);
break;
case MMC_POWER_UP:
pwr |= MCI_PWR_UP;
break;
case MMC_POWER_ON:
- htc_pwrsink_set(PWRSINK_SDCARD, 100);
pwr |= MCI_PWR_ON;
break;
}
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 88671529c45..60a2b69e54f 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -679,17 +679,17 @@ static int mxcmci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct mxcmci_host *host = NULL;
- struct resource *r;
+ struct resource *iores, *r;
int ret = 0, irq;
printk(KERN_INFO "i.MX SDHC driver\n");
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!r || irq < 0)
+ if (!iores || irq < 0)
return -EINVAL;
- r = request_mem_region(r->start, resource_size(r), pdev->name);
+ r = request_mem_region(iores->start, resource_size(iores), pdev->name);
if (!r)
return -EBUSY;
@@ -809,7 +809,7 @@ out_iounmap:
out_free:
mmc_free_host(mmc);
out_release_mem:
- release_mem_region(host->res->start, resource_size(host->res));
+ release_mem_region(iores->start, resource_size(iores));
return ret;
}
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
index 0c44d560bf1..0c7a63c1f12 100644
--- a/drivers/mmc/host/of_mmc_spi.c
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -22,6 +22,8 @@
#include <linux/mmc/core.h>
#include <linux/mmc/host.h>
+MODULE_LICENSE("GPL");
+
enum {
CD_GPIO = 0,
WP_GPIO,
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index e7a331de573..c6d7e8ecadb 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,12 +30,12 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
#include <mach/gpio.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x04
@@ -1459,8 +1459,10 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
goto err_ioremap;
host->iclk = clk_get(&pdev->dev, "ick");
- if (IS_ERR(host->iclk))
+ if (IS_ERR(host->iclk)) {
+ ret = PTR_ERR(host->iclk);
goto err_free_mmc_host;
+ }
clk_enable(host->iclk);
host->fclk = clk_get(&pdev->dev, "fck");
@@ -1500,10 +1502,8 @@ err_free_irq:
err_free_fclk:
clk_put(host->fclk);
err_free_iclk:
- if (host->iclk != NULL) {
- clk_disable(host->iclk);
- clk_put(host->iclk);
- }
+ clk_disable(host->iclk);
+ clk_put(host->iclk);
err_free_mmc_host:
iounmap(host->virt_base);
err_ioremap:
@@ -1529,6 +1529,7 @@ static int mmc_omap_remove(struct platform_device *pdev)
host->pdata->cleanup(&pdev->dev);
mmc_omap_fclk_enable(host, 0);
+ free_irq(host->irq, host);
clk_put(host->fclk);
clk_disable(host->iclk);
clk_put(host->iclk);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4487cc09791..4b232251890 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -30,11 +30,11 @@
#include <linux/mmc/core.h>
#include <linux/io.h>
#include <linux/semaphore.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/cpu.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/cpu.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSCONFIG 0x0010
@@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = {
static int __init omap_hsmmc_init(void)
{
/* Register the MMC driver */
- return platform_driver_register(&omap_hsmmc_driver);
+ return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe);
}
static void __exit omap_hsmmc_cleanup(void)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 5e0b1529964..0d783f3e79e 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -43,6 +43,9 @@
#define NR_SG 1
#define CLKRT_OFF (~0)
+#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \
+ || cpu_is_pxa935())
+
struct pxamci_host {
struct mmc_host *mmc;
spinlock_t lock;
@@ -457,7 +460,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
clk_enable(host->clk);
if (ios->clock == 26000000) {
- /* to support 26MHz on pxa300/pxa310 */
+ /* to support 26MHz */
host->clkrt = 7;
} else {
/* to handle (19.5MHz, 26MHz) */
@@ -608,8 +611,7 @@ static int pxamci_probe(struct platform_device *pdev)
* Calculate minimum clock rate, rounding up.
*/
mmc->f_min = (host->clkrate + 63) / 64;
- mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
- : host->clkrate;
+ mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
pxamci_init_ocr(host);
@@ -618,7 +620,7 @@ static int pxamci_probe(struct platform_device *pdev)
if (!cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->cmdat |= CMDAT_SDIO_INT_EN;
- if (cpu_is_pxa300() || cpu_is_pxa310())
+ if (mmc_has_26MHz())
mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
MMC_CAP_SD_HIGHSPEED;
}
@@ -693,7 +695,7 @@ static int pxamci_probe(struct platform_device *pdev)
if (gpio_is_valid(gpio_ro)) {
ret = gpio_request(gpio_ro, "mmc card read only");
if (ret) {
- dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power);
+ dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
goto err_gpio_ro;
}
gpio_direction_input(gpio_ro);
@@ -701,7 +703,7 @@ static int pxamci_probe(struct platform_device *pdev)
if (gpio_is_valid(gpio_cd)) {
ret = gpio_request(gpio_cd, "mmc card detect");
if (ret) {
- dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power);
+ dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
goto err_gpio_cd;
}
gpio_direction_input(gpio_cd);
@@ -760,6 +762,8 @@ static int pxamci_remove(struct platform_device *pdev)
if (mmc) {
struct pxamci_host *host = mmc_priv(mmc);
+ mmc_remove_host(mmc);
+
if (host->pdata) {
gpio_cd = host->pdata->gpio_card_detect;
gpio_ro = host->pdata->gpio_card_ro;
@@ -779,8 +783,6 @@ static int pxamci_remove(struct platform_device *pdev)
if (host->pdata && host->pdata->exit)
host->pdata->exit(&pdev->dev, mmc);
- mmc_remove_host(mmc);
-
pxamci_stop_clock(host);
writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
@@ -826,7 +828,7 @@ static int pxamci_resume(struct device *dev)
return ret;
}
-static struct dev_pm_ops pxamci_pm_ops = {
+static const struct dev_pm_ops pxamci_pm_ops = {
.suspend = pxamci_suspend,
.resume = pxamci_resume,
};
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 99b74a35102..d96e1abf2d6 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -820,7 +820,7 @@ fail_request:
static void finalize_request(struct s3cmci_host *host)
{
struct mmc_request *mrq = host->mrq;
- struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
+ struct mmc_command *cmd;
int debug_as_failure = 0;
if (host->complete_what != COMPLETION_FINALIZE)
@@ -828,6 +828,7 @@ static void finalize_request(struct s3cmci_host *host)
if (!mrq)
return;
+ cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
if (cmd->data && (cmd->error == 0) &&
(cmd->data->error == 0)) {
@@ -1302,10 +1303,8 @@ static int s3cmci_get_ro(struct mmc_host *mmc)
if (pdata->no_wprotect)
return 0;
- ret = s3c2410_gpio_getpin(pdata->gpio_wprotect);
-
- if (pdata->wprotect_invert)
- ret = !ret;
+ ret = gpio_get_value(pdata->gpio_wprotect) ? 1 : 0;
+ ret ^= pdata->wprotect_invert;
return ret;
}
@@ -1360,7 +1359,7 @@ static struct mmc_host_ops s3cmci_ops = {
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
/* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reaonable defaults are picked. */
+ * checks. Any zero fields to ensure reasonable defaults are picked. */
};
#ifdef CONFIG_CPU_FREQ
@@ -1654,7 +1653,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev)
goto probe_free_irq;
}
- host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
+ host->irq_cd = gpio_to_irq(host->pdata->gpio_detect);
if (host->irq_cd >= 0) {
if (request_irq(host->irq_cd, s3cmci_irq_cd,
@@ -1892,7 +1891,7 @@ static int s3cmci_resume(struct device *dev)
return mmc_resume_host(mmc);
}
-static struct dev_pm_ops s3cmci_pm = {
+static const struct dev_pm_ops s3cmci_pm = {
.suspend = s3cmci_suspend,
.resume = s3cmci_resume,
};
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of-core.c
index 01ab916c280..55e33135edb 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of-core.c
@@ -22,62 +22,37 @@
#include <linux/of_platform.h>
#include <linux/mmc/host.h>
#include <asm/machdep.h>
+#include "sdhci-of.h"
#include "sdhci.h"
-struct sdhci_of_data {
- unsigned int quirks;
- struct sdhci_ops ops;
-};
-
-struct sdhci_of_host {
- unsigned int clock;
- u16 xfer_mode_shadow;
-};
+#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
/*
- * Ops and quirks for the Freescale eSDHC controller.
+ * These accessors are designed for big endian hosts doing I/O to
+ * little endian controllers incorporating a 32-bit hardware byte swapper.
*/
-#define ESDHC_DMA_SYSCTL 0x40c
-#define ESDHC_DMA_SNOOP 0x00000040
-
-#define ESDHC_SYSTEM_CONTROL 0x2c
-#define ESDHC_CLOCK_MASK 0x0000fff0
-#define ESDHC_PREDIV_SHIFT 8
-#define ESDHC_DIVIDER_SHIFT 4
-#define ESDHC_CLOCK_PEREN 0x00000004
-#define ESDHC_CLOCK_HCKEN 0x00000002
-#define ESDHC_CLOCK_IPGEN 0x00000001
-
-#define ESDHC_HOST_CONTROL_RES 0x05
-
-static u32 esdhc_readl(struct sdhci_host *host, int reg)
+u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg)
{
return in_be32(host->ioaddr + reg);
}
-static u16 esdhc_readw(struct sdhci_host *host, int reg)
+u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg)
{
- u16 ret;
-
- if (unlikely(reg == SDHCI_HOST_VERSION))
- ret = in_be16(host->ioaddr + reg);
- else
- ret = in_be16(host->ioaddr + (reg ^ 0x2));
- return ret;
+ return in_be16(host->ioaddr + (reg ^ 0x2));
}
-static u8 esdhc_readb(struct sdhci_host *host, int reg)
+u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg)
{
return in_8(host->ioaddr + (reg ^ 0x3));
}
-static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
+void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg)
{
out_be32(host->ioaddr + reg, val);
}
-static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
+void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
int base = reg & ~0x3;
@@ -92,106 +67,21 @@ static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
of_host->xfer_mode_shadow = val;
return;
case SDHCI_COMMAND:
- esdhc_writel(host, val << 16 | of_host->xfer_mode_shadow,
- SDHCI_TRANSFER_MODE);
+ sdhci_be32bs_writel(host, val << 16 | of_host->xfer_mode_shadow,
+ SDHCI_TRANSFER_MODE);
return;
- case SDHCI_BLOCK_SIZE:
- /*
- * Two last DMA bits are reserved, and first one is used for
- * non-standard blksz of 4096 bytes that we don't support
- * yet. So clear the DMA boundary bits.
- */
- val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
- /* fall through */
}
clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift);
}
-static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
+void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg)
{
int base = reg & ~0x3;
int shift = (reg & 0x3) * 8;
- /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
- if (reg == SDHCI_HOST_CONTROL)
- val &= ~ESDHC_HOST_CONTROL_RES;
-
clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift);
}
-
-static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
-{
- int pre_div = 2;
- int div = 1;
-
- clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
- ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
-
- if (clock == 0)
- goto out;
-
- while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
- pre_div *= 2;
-
- while (host->max_clk / pre_div / div > clock && div < 16)
- div++;
-
- dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
- clock, host->max_clk / pre_div / div);
-
- pre_div >>= 1;
- div--;
-
- setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
- ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN |
- div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT);
- mdelay(100);
-out:
- host->clock = clock;
-}
-
-static int esdhc_enable_dma(struct sdhci_host *host)
-{
- setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
- return 0;
-}
-
-static unsigned int esdhc_get_max_clock(struct sdhci_host *host)
-{
- struct sdhci_of_host *of_host = sdhci_priv(host);
-
- return of_host->clock;
-}
-
-static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
-{
- struct sdhci_of_host *of_host = sdhci_priv(host);
-
- return of_host->clock / 256 / 16;
-}
-
-static struct sdhci_of_data sdhci_esdhc = {
- .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 |
- SDHCI_QUIRK_BROKEN_CARD_DETECTION |
- SDHCI_QUIRK_NO_BUSY_IRQ |
- SDHCI_QUIRK_NONSTANDARD_CLOCK |
- SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
- SDHCI_QUIRK_PIO_NEEDS_DELAY |
- SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET |
- SDHCI_QUIRK_NO_CARD_NO_RESET,
- .ops = {
- .readl = esdhc_readl,
- .readw = esdhc_readw,
- .readb = esdhc_readb,
- .writel = esdhc_writel,
- .writew = esdhc_writew,
- .writeb = esdhc_writeb,
- .set_clock = esdhc_set_clock,
- .enable_dma = esdhc_enable_dma,
- .get_max_clock = esdhc_get_max_clock,
- .get_min_clock = esdhc_get_min_clock,
- },
-};
+#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */
#ifdef CONFIG_PM
@@ -301,9 +191,14 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev)
}
static const struct of_device_id sdhci_of_match[] = {
+#ifdef CONFIG_MMC_SDHCI_OF_ESDHC
{ .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, },
{ .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, },
{ .compatible = "fsl,esdhc", .data = &sdhci_esdhc, },
+#endif
+#ifdef CONFIG_MMC_SDHCI_OF_HLWD
+ { .compatible = "nintendo,hollywood-sdhci", .data = &sdhci_hlwd, },
+#endif
{ .compatible = "generic-sdhci", },
{},
};
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
new file mode 100644
index 00000000000..d5b11a17e64
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -0,0 +1,143 @@
+/*
+ * Freescale eSDHC controller driver.
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include "sdhci-of.h"
+#include "sdhci.h"
+
+/*
+ * Ops and quirks for the Freescale eSDHC controller.
+ */
+
+#define ESDHC_DMA_SYSCTL 0x40c
+#define ESDHC_DMA_SNOOP 0x00000040
+
+#define ESDHC_SYSTEM_CONTROL 0x2c
+#define ESDHC_CLOCK_MASK 0x0000fff0
+#define ESDHC_PREDIV_SHIFT 8
+#define ESDHC_DIVIDER_SHIFT 4
+#define ESDHC_CLOCK_PEREN 0x00000004
+#define ESDHC_CLOCK_HCKEN 0x00000002
+#define ESDHC_CLOCK_IPGEN 0x00000001
+
+#define ESDHC_HOST_CONTROL_RES 0x05
+
+static u16 esdhc_readw(struct sdhci_host *host, int reg)
+{
+ u16 ret;
+
+ if (unlikely(reg == SDHCI_HOST_VERSION))
+ ret = in_be16(host->ioaddr + reg);
+ else
+ ret = sdhci_be32bs_readw(host, reg);
+ return ret;
+}
+
+static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ if (reg == SDHCI_BLOCK_SIZE) {
+ /*
+ * Two last DMA bits are reserved, and first one is used for
+ * non-standard blksz of 4096 bytes that we don't support
+ * yet. So clear the DMA boundary bits.
+ */
+ val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
+ }
+ sdhci_be32bs_writew(host, val, reg);
+}
+
+static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+ /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
+ if (reg == SDHCI_HOST_CONTROL)
+ val &= ~ESDHC_HOST_CONTROL_RES;
+ sdhci_be32bs_writeb(host, val, reg);
+}
+
+static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ int pre_div = 2;
+ int div = 1;
+
+ clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
+ ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
+
+ if (clock == 0)
+ goto out;
+
+ while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+ pre_div *= 2;
+
+ while (host->max_clk / pre_div / div > clock && div < 16)
+ div++;
+
+ dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
+ clock, host->max_clk / pre_div / div);
+
+ pre_div >>= 1;
+ div--;
+
+ setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
+ ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN |
+ div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT);
+ mdelay(100);
+out:
+ host->clock = clock;
+}
+
+static int esdhc_enable_dma(struct sdhci_host *host)
+{
+ setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
+ return 0;
+}
+
+static unsigned int esdhc_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_of_host *of_host = sdhci_priv(host);
+
+ return of_host->clock;
+}
+
+static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_of_host *of_host = sdhci_priv(host);
+
+ return of_host->clock / 256 / 16;
+}
+
+struct sdhci_of_data sdhci_esdhc = {
+ .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 |
+ SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+ SDHCI_QUIRK_NO_BUSY_IRQ |
+ SDHCI_QUIRK_NONSTANDARD_CLOCK |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_PIO_NEEDS_DELAY |
+ SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET |
+ SDHCI_QUIRK_NO_CARD_NO_RESET,
+ .ops = {
+ .readl = sdhci_be32bs_readl,
+ .readw = esdhc_readw,
+ .readb = sdhci_be32bs_readb,
+ .writel = sdhci_be32bs_writel,
+ .writew = esdhc_writew,
+ .writeb = esdhc_writeb,
+ .set_clock = esdhc_set_clock,
+ .enable_dma = esdhc_enable_dma,
+ .get_max_clock = esdhc_get_max_clock,
+ .get_min_clock = esdhc_get_min_clock,
+ },
+};
diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c
new file mode 100644
index 00000000000..35117f3ed75
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-hlwd.c
@@ -0,0 +1,65 @@
+/*
+ * drivers/mmc/host/sdhci-of-hlwd.c
+ *
+ * Nintendo Wii Secure Digital Host Controller Interface.
+ * Copyright (C) 2009 The GameCube Linux Team
+ * Copyright (C) 2009 Albert Herranz
+ *
+ * Based on sdhci-of-esdhc.c
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include "sdhci-of.h"
+#include "sdhci.h"
+
+/*
+ * Ops and quirks for the Nintendo Wii SDHCI controllers.
+ */
+
+/*
+ * We need a small delay after each write, or things go horribly wrong.
+ */
+#define SDHCI_HLWD_WRITE_DELAY 5 /* usecs */
+
+static void sdhci_hlwd_writel(struct sdhci_host *host, u32 val, int reg)
+{
+ sdhci_be32bs_writel(host, val, reg);
+ udelay(SDHCI_HLWD_WRITE_DELAY);
+}
+
+static void sdhci_hlwd_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ sdhci_be32bs_writew(host, val, reg);
+ udelay(SDHCI_HLWD_WRITE_DELAY);
+}
+
+static void sdhci_hlwd_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+ sdhci_be32bs_writeb(host, val, reg);
+ udelay(SDHCI_HLWD_WRITE_DELAY);
+}
+
+struct sdhci_of_data sdhci_hlwd = {
+ .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE,
+ .ops = {
+ .readl = sdhci_be32bs_readl,
+ .readw = sdhci_be32bs_readw,
+ .readb = sdhci_be32bs_readb,
+ .writel = sdhci_hlwd_writel,
+ .writew = sdhci_hlwd_writew,
+ .writeb = sdhci_hlwd_writeb,
+ },
+};
diff --git a/drivers/mmc/host/sdhci-of.h b/drivers/mmc/host/sdhci-of.h
new file mode 100644
index 00000000000..ad09ad9915d
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of.h
@@ -0,0 +1,42 @@
+/*
+ * OpenFirmware bindings for Secure Digital Host Controller Interface.
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef __SDHCI_OF_H
+#define __SDHCI_OF_H
+
+#include <linux/types.h>
+#include "sdhci.h"
+
+struct sdhci_of_data {
+ unsigned int quirks;
+ struct sdhci_ops ops;
+};
+
+struct sdhci_of_host {
+ unsigned int clock;
+ u16 xfer_mode_shadow;
+};
+
+extern u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg);
+extern u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg);
+extern u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg);
+extern void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg);
+extern void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg);
+extern void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg);
+
+extern struct sdhci_of_data sdhci_esdhc;
+extern struct sdhci_of_data sdhci_hlwd;
+
+#endif /* __SDHCI_OF_H */
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index e0356644d1a..5c3a1767770 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -285,6 +285,73 @@ static const struct sdhci_pci_fixes sdhci_jmicron = {
.resume = jmicron_resume,
};
+/* SysKonnect CardBus2SDIO extra registers */
+#define SYSKT_CTRL 0x200
+#define SYSKT_RDFIFO_STAT 0x204
+#define SYSKT_WRFIFO_STAT 0x208
+#define SYSKT_POWER_DATA 0x20c
+#define SYSKT_POWER_330 0xef
+#define SYSKT_POWER_300 0xf8
+#define SYSKT_POWER_184 0xcc
+#define SYSKT_POWER_CMD 0x20d
+#define SYSKT_POWER_START (1 << 7)
+#define SYSKT_POWER_STATUS 0x20e
+#define SYSKT_POWER_STATUS_OK (1 << 0)
+#define SYSKT_BOARD_REV 0x210
+#define SYSKT_CHIP_REV 0x211
+#define SYSKT_CONF_DATA 0x212
+#define SYSKT_CONF_DATA_1V8 (1 << 2)
+#define SYSKT_CONF_DATA_2V5 (1 << 1)
+#define SYSKT_CONF_DATA_3V3 (1 << 0)
+
+static int syskt_probe(struct sdhci_pci_chip *chip)
+{
+ if ((chip->pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
+ chip->pdev->class &= ~0x0000FF;
+ chip->pdev->class |= PCI_SDHCI_IFDMA;
+ }
+ return 0;
+}
+
+static int syskt_probe_slot(struct sdhci_pci_slot *slot)
+{
+ int tm, ps;
+
+ u8 board_rev = readb(slot->host->ioaddr + SYSKT_BOARD_REV);
+ u8 chip_rev = readb(slot->host->ioaddr + SYSKT_CHIP_REV);
+ dev_info(&slot->chip->pdev->dev, "SysKonnect CardBus2SDIO, "
+ "board rev %d.%d, chip rev %d.%d\n",
+ board_rev >> 4, board_rev & 0xf,
+ chip_rev >> 4, chip_rev & 0xf);
+ if (chip_rev >= 0x20)
+ slot->host->quirks |= SDHCI_QUIRK_FORCE_DMA;
+
+ writeb(SYSKT_POWER_330, slot->host->ioaddr + SYSKT_POWER_DATA);
+ writeb(SYSKT_POWER_START, slot->host->ioaddr + SYSKT_POWER_CMD);
+ udelay(50);
+ tm = 10; /* Wait max 1 ms */
+ do {
+ ps = readw(slot->host->ioaddr + SYSKT_POWER_STATUS);
+ if (ps & SYSKT_POWER_STATUS_OK)
+ break;
+ udelay(100);
+ } while (--tm);
+ if (!tm) {
+ dev_err(&slot->chip->pdev->dev,
+ "power regulator never stabilized");
+ writeb(0, slot->host->ioaddr + SYSKT_POWER_CMD);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_syskt = {
+ .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER,
+ .probe = syskt_probe,
+ .probe_slot = syskt_probe_slot,
+};
+
static int via_probe(struct sdhci_pci_chip *chip)
{
if (chip->pdev->revision == 0x10)
@@ -363,6 +430,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
},
{
+ .vendor = PCI_VENDOR_ID_SYSKONNECT,
+ .device = 0x8000,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_syskt,
+ },
+
+ {
.vendor = PCI_VENDOR_ID_VIA,
.device = 0x95d0,
.subvendor = PCI_ANY_ID,
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index ce5f1d73dc0..842f46f9428 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -8,6 +8,8 @@
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
+#ifndef __SDHCI_H
+#define __SDHCI_H
#include <linux/scatterlist.h>
#include <linux/compiler.h>
@@ -408,3 +410,5 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead);
extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
extern int sdhci_resume_host(struct sdhci_host *host);
#endif
+
+#endif /* __SDHCI_H */
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 91991b460c4..e22c3fa3516 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -46,7 +46,9 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
clk |= 0x100;
}
- sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+ if (host->set_clk_div)
+ host->set_clk_div(host->pdev, (clk>>22) & 1);
+
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
}
@@ -427,12 +429,13 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* Power sequence - OFF -> ON -> UP */
switch (ios->power_mode) {
case MMC_POWER_OFF: /* power down SD bus */
- sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 0);
tmio_mmc_clk_stop(host);
break;
case MMC_POWER_ON: /* power up SD bus */
-
- sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 1);
break;
case MMC_POWER_UP: /* start bus clock */
tmio_mmc_clk_start(host);
@@ -485,21 +488,15 @@ static int tmio_mmc_resume(struct platform_device *dev)
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct mmc_host *mmc = platform_get_drvdata(dev);
- struct tmio_mmc_host *host = mmc_priv(mmc);
int ret = 0;
/* Tell the MFD core we are ready to be enabled */
- if (cell->enable) {
- ret = cell->enable(dev);
+ if (cell->resume) {
+ ret = cell->resume(dev);
if (ret)
goto out;
}
- /* Enable the MMC/SD Control registers */
- sd_config_write16(host, CNF_CMD, SDCREN);
- sd_config_write32(host, CNF_CTL_BASE,
- (dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
mmc_resume_host(mmc);
out:
@@ -514,17 +511,16 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct tmio_mmc_data *pdata;
- struct resource *res_ctl, *res_cnf;
+ struct resource *res_ctl;
struct tmio_mmc_host *host;
struct mmc_host *mmc;
int ret = -EINVAL;
- if (dev->num_resources != 3)
+ if (dev->num_resources != 2)
goto out;
res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
- res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
- if (!res_ctl || !res_cnf)
+ if (!res_ctl)
goto out;
pdata = cell->driver_data;
@@ -539,8 +535,12 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
host = mmc_priv(mmc);
host->mmc = mmc;
+ host->pdev = dev;
platform_set_drvdata(dev, mmc);
+ host->set_pwr = pdata->set_pwr;
+ host->set_clk_div = pdata->set_clk_div;
+
/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
host->bus_shift = resource_size(res_ctl) >> 10;
@@ -548,10 +548,6 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
if (!host->ctl)
goto host_free;
- host->cnf = ioremap(res_cnf->start, resource_size(res_cnf));
- if (!host->cnf)
- goto unmap_ctl;
-
mmc->ops = &tmio_mmc_ops;
mmc->caps = MMC_CAP_4_BIT_DATA;
mmc->f_max = pdata->hclk;
@@ -562,23 +558,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
if (cell->enable) {
ret = cell->enable(dev);
if (ret)
- goto unmap_cnf;
+ goto unmap_ctl;
}
- /* Enable the MMC/SD Control registers */
- sd_config_write16(host, CNF_CMD, SDCREN);
- sd_config_write32(host, CNF_CTL_BASE,
- (dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
- /* Disable SD power during suspend */
- sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
-
- /* The below is required but why? FIXME */
- sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
-
- /* Power down SD bus*/
- sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
-
tmio_mmc_clk_stop(host);
reset(host);
@@ -586,14 +568,14 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
if (ret >= 0)
host->irq = ret;
else
- goto unmap_cnf;
+ goto unmap_ctl;
disable_mmc_irqs(host, TMIO_MASK_ALL);
ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
- IRQF_TRIGGER_FALLING, "tmio-mmc", host);
+ IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host);
if (ret)
- goto unmap_cnf;
+ goto unmap_ctl;
mmc_add_host(mmc);
@@ -605,8 +587,6 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
return 0;
-unmap_cnf:
- iounmap(host->cnf);
unmap_ctl:
iounmap(host->ctl);
host_free:
@@ -626,7 +606,6 @@ static int __devexit tmio_mmc_remove(struct platform_device *dev)
mmc_remove_host(mmc);
free_irq(host->irq, host);
iounmap(host->ctl);
- iounmap(host->cnf);
mmc_free_host(mmc);
}
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9fa99859497..692dc23363b 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -11,26 +11,6 @@
#include <linux/highmem.h>
-#define CNF_CMD 0x04
-#define CNF_CTL_BASE 0x10
-#define CNF_INT_PIN 0x3d
-#define CNF_STOP_CLK_CTL 0x40
-#define CNF_GCLK_CTL 0x41
-#define CNF_SD_CLK_MODE 0x42
-#define CNF_PIN_STATUS 0x44
-#define CNF_PWR_CTL_1 0x48
-#define CNF_PWR_CTL_2 0x49
-#define CNF_PWR_CTL_3 0x4a
-#define CNF_CARD_DETECT_MODE 0x4c
-#define CNF_SD_SLOT 0x50
-#define CNF_EXT_GCLK_CTL_1 0xf0
-#define CNF_EXT_GCLK_CTL_2 0xf1
-#define CNF_EXT_GCLK_CTL_3 0xf9
-#define CNF_SD_LED_EN_1 0xfa
-#define CNF_SD_LED_EN_2 0xfe
-
-#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-
#define CTL_SD_CMD 0x00
#define CTL_ARG_REG 0x04
#define CTL_STOP_INTERNAL_ACTION 0x08
@@ -110,7 +90,6 @@
struct tmio_mmc_host {
- void __iomem *cnf;
void __iomem *ctl;
unsigned long bus_shift;
struct mmc_command *cmd;
@@ -119,10 +98,16 @@ struct tmio_mmc_host {
struct mmc_host *mmc;
int irq;
+ /* Callbacks for clock / power control */
+ void (*set_pwr)(struct platform_device *host, int state);
+ void (*set_clk_div)(struct platform_device *host, int state);
+
/* pio related stuff */
struct scatterlist *sg_ptr;
unsigned int sg_len;
unsigned int sg_off;
+
+ struct platform_device *pdev;
};
#include <linux/io.h>
@@ -163,25 +148,6 @@ static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr,
writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
-static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
- u8 val)
-{
- writeb(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
- u16 val)
-{
- writew(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
- u32 val)
-{
- writew(val, host->cnf + (addr << host->bus_shift));
- writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
-}
-
#include <linux/scatterlist.h>
#include <linux/blkdev.h>