diff options
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/Kconfig | 20 | ||||
| -rw-r--r-- | drivers/mmc/host/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/atmel-mci.c | 5 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.c | 37 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.h | 28 | ||||
| -rw-r--r-- | drivers/mmc/host/mxcmmc.c | 880 | ||||
| -rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 1280 | ||||
| -rw-r--r-- | drivers/mmc/host/pxamci.c | 25 | ||||
| -rw-r--r-- | drivers/mmc/host/ricoh_mmc.c | 8 | ||||
| -rw-r--r-- | drivers/mmc/host/s3cmci.c | 7 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-pci.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 12 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.h | 5 |
13 files changed, 2285 insertions, 28 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index dfa585f7fea..99d4b28d52e 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -76,6 +76,16 @@ config MMC_OMAP If unsure, say N. +config MMC_OMAP_HS + tristate "TI OMAP High Speed Multimedia Card Interface support" + depends on ARCH_OMAP2430 || ARCH_OMAP3 + help + This selects the TI OMAP High Speed Multimedia card Interface. + If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot, + say Y or M here. + + If unsure, say N. + config MMC_WBSD tristate "Winbond W83L51xD SD/MMC Card Interface support" depends on ISA_DMA_API @@ -135,6 +145,16 @@ config MMC_IMX If unsure, say N. +config MMC_MXC + tristate "Freescale i.MX2/3 Multimedia Card Interface support" + depends on ARCH_MXC + help + This selects the Freescale i.MX2/3 Multimedia card Interface. + If you have a i.MX platform with a Multimedia Card slot, + say Y or M here. + + If unsure, say N. + config MMC_TIFM_SD tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)" depends on EXPERIMENTAL && PCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index f4853288bbb..dedec55861d 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -9,12 +9,14 @@ endif obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_PXA) += pxamci.o obj-$(CONFIG_MMC_IMX) += imxmmc.o +obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o +obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 76bfe16c09b..2b1196e6142 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave) { struct dw_dma_slave *dws = slave; - if (dws->dma_dev == chan->device->dev) + if (dws->dma_dev == chan->device->dev) { + chan->private = dws; return true; - else + } else return false; } #endif diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 1bcbdd6763a..2909bbc8ad0 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } + if (host->hw_designer == 0x80) + clk |= MCI_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; } @@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: break; case MMC_POWER_UP: - pwr |= MCI_PWR_UP; - break; + /* The ST version does not have this, fall through to POWER_ON */ + if (host->hw_designer != 0x80) { + pwr |= MCI_PWR_UP; + break; + } case MMC_POWER_ON: pwr |= MCI_PWR_ON; break; } - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - pwr |= MCI_ROD; + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { + if (host->hw_designer != 0x80) + pwr |= MCI_ROD; + else { + /* + * The ST Micro variant use the ROD bit for something + * else and only has OD (Open Drain). + */ + pwr |= MCI_OD; + } + } writel(clk, host->base + MMCICLOCK); @@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); + /* Bits 12 thru 19 is the designer */ + host->hw_designer = (dev->periphid >> 12) & 0xff; + /* Bits 20 thru 23 is the revison */ + host->hw_revision = (dev->periphid >> 20) & 0xf; + DBG(host, "designer ID = 0x%02x\n", host->hw_designer); + DBG(host, "revision = 0x%01x\n", host->hw_revision); host->clk = clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); @@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = { .id = 0x00041181, .mask = 0x000fffff, }, + /* ST Micro variants */ + { + .id = 0x00180180, + .mask = 0x00ffffff, + }, + { + .id = 0x00280180, + .mask = 0x00ffffff, + }, { 0, 0 }, }; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 0f39c490f02..0441bac1c0e 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -11,13 +11,23 @@ #define MCI_PWR_OFF 0x00 #define MCI_PWR_UP 0x02 #define MCI_PWR_ON 0x03 +#define MCI_DATA2DIREN (1 << 2) +#define MCI_CMDDIREN (1 << 3) +#define MCI_DATA0DIREN (1 << 4) +#define MCI_DATA31DIREN (1 << 5) #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) +/* The ST Micro version does not have ROD */ +#define MCI_FBCLKEN (1 << 7) +#define MCI_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) +#define MCI_WIDE_BUS (1 << 11) +/* HW flow control on the ST Micro version */ +#define MCI_FCEN (1 << 13) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -26,6 +36,10 @@ #define MCI_CPSM_INTERRUPT (1 << 8) #define MCI_CPSM_PENDING (1 << 9) #define MCI_CPSM_ENABLE (1 << 10) +#define MCI_SDIO_SUSP (1 << 11) +#define MCI_ENCMD_COMPL (1 << 12) +#define MCI_NIEN (1 << 13) +#define MCI_CE_ATACMD (1 << 14) #define MMCIRESPCMD 0x010 #define MMCIRESPONSE0 0x014 @@ -39,6 +53,11 @@ #define MCI_DPSM_DIRECTION (1 << 1) #define MCI_DPSM_MODE (1 << 2) #define MCI_DPSM_DMAENABLE (1 << 3) +#define MCI_DPSM_BLOCKSIZE (1 << 4) +#define MCI_DPSM_RWSTART (1 << 8) +#define MCI_DPSM_RWSTOP (1 << 9) +#define MCI_DPSM_RWMOD (1 << 10) +#define MCI_DPSM_SDIOEN (1 << 11) #define MMCIDATACNT 0x030 #define MMCISTATUS 0x034 @@ -63,6 +82,8 @@ #define MCI_RXFIFOEMPTY (1 << 19) #define MCI_TXDATAAVLBL (1 << 20) #define MCI_RXDATAAVLBL (1 << 21) +#define MCI_SDIOIT (1 << 22) +#define MCI_CEATAEND (1 << 23) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -75,6 +96,8 @@ #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) #define MCI_DATABLOCKENDCLR (1 << 10) +#define MCI_SDIOITC (1 << 22) +#define MCI_CEATAENDC (1 << 23) #define MMCIMASK0 0x03c #define MCI_CMDCRCFAILMASK (1 << 0) @@ -98,6 +121,8 @@ #define MCI_RXFIFOEMPTYMASK (1 << 19) #define MCI_TXDATAAVLBLMASK (1 << 20) #define MCI_RXDATAAVLBLMASK (1 << 21) +#define MCI_SDIOITMASK (1 << 22) +#define MCI_CEATAENDMASK (1 << 23) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 @@ -136,6 +161,9 @@ struct mmci_host { u32 pwr; struct mmc_platform_data *plat; + u8 hw_designer; + u8 hw_revision:4; + struct timer_list timer; unsigned int oldstat; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c new file mode 100644 index 00000000000..dda0be4e25d --- /dev/null +++ b/drivers/mmc/host/mxcmmc.c @@ -0,0 +1,880 @@ +/* + * linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver + * + * This is a driver for the SDHC controller found in Freescale MX2/MX3 + * SoCs. It is basically the same hardware as found on MX1 (imxmmc.c). + * Unlike the hardware found on MX1, this hardware just works and does + * not need all the quirks found in imxmmc.c, hence the seperate driver. + * + * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> + * + * derived from pxamci.c by Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/blkdev.h> +#include <linux/dma-mapping.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <asm/dma.h> +#include <asm/irq.h> +#include <asm/sizes.h> +#include <mach/mmc.h> + +#ifdef CONFIG_ARCH_MX2 +#include <mach/dma-mx1-mx2.h> +#define HAS_DMA +#endif + +#define DRIVER_NAME "imx-mmc" + +#define MMC_REG_STR_STP_CLK 0x00 +#define MMC_REG_STATUS 0x04 +#define MMC_REG_CLK_RATE 0x08 +#define MMC_REG_CMD_DAT_CONT 0x0C +#define MMC_REG_RES_TO 0x10 +#define MMC_REG_READ_TO 0x14 +#define MMC_REG_BLK_LEN 0x18 +#define MMC_REG_NOB 0x1C +#define MMC_REG_REV_NO 0x20 +#define MMC_REG_INT_CNTR 0x24 +#define MMC_REG_CMD 0x28 +#define MMC_REG_ARG 0x2C +#define MMC_REG_RES_FIFO 0x34 +#define MMC_REG_BUFFER_ACCESS 0x38 + +#define STR_STP_CLK_RESET (1 << 3) +#define STR_STP_CLK_START_CLK (1 << 1) +#define STR_STP_CLK_STOP_CLK (1 << 0) + +#define STATUS_CARD_INSERTION (1 << 31) +#define STATUS_CARD_REMOVAL (1 << 30) +#define STATUS_YBUF_EMPTY (1 << 29) +#define STATUS_XBUF_EMPTY (1 << 28) +#define STATUS_YBUF_FULL (1 << 27) +#define STATUS_XBUF_FULL (1 << 26) +#define STATUS_BUF_UND_RUN (1 << 25) +#define STATUS_BUF_OVFL (1 << 24) +#define STATUS_SDIO_INT_ACTIVE (1 << 14) +#define STATUS_END_CMD_RESP (1 << 13) +#define STATUS_WRITE_OP_DONE (1 << 12) +#define STATUS_DATA_TRANS_DONE (1 << 11) +#define STATUS_READ_OP_DONE (1 << 11) +#define STATUS_WR_CRC_ERROR_CODE_MASK (3 << 10) +#define STATUS_CARD_BUS_CLK_RUN (1 << 8) +#define STATUS_BUF_READ_RDY (1 << 7) +#define STATUS_BUF_WRITE_RDY (1 << 6) +#define STATUS_RESP_CRC_ERR (1 << 5) +#define STATUS_CRC_READ_ERR (1 << 3) +#define STATUS_CRC_WRITE_ERR (1 << 2) +#define STATUS_TIME_OUT_RESP (1 << 1) +#define STATUS_TIME_OUT_READ (1 << 0) +#define STATUS_ERR_MASK 0x2f + +#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1 << 12) +#define CMD_DAT_CONT_STOP_READWAIT (1 << 11) +#define CMD_DAT_CONT_START_READWAIT (1 << 10) +#define CMD_DAT_CONT_BUS_WIDTH_4 (2 << 8) +#define CMD_DAT_CONT_INIT (1 << 7) +#define CMD_DAT_CONT_WRITE (1 << 4) +#define CMD_DAT_CONT_DATA_ENABLE (1 << 3) +#define CMD_DAT_CONT_RESPONSE_48BIT_CRC (1 << 0) +#define CMD_DAT_CONT_RESPONSE_136BIT (2 << 0) +#define CMD_DAT_CONT_RESPONSE_48BIT (3 << 0) + +#define INT_SDIO_INT_WKP_EN (1 << 18) +#define INT_CARD_INSERTION_WKP_EN (1 << 17) +#define INT_CARD_REMOVAL_WKP_EN (1 << 16) +#define INT_CARD_INSERTION_EN (1 << 15) +#define INT_CARD_REMOVAL_EN (1 << 14) +#define INT_SDIO_IRQ_EN (1 << 13) +#define INT_DAT0_EN (1 << 12) +#define INT_BUF_READ_EN (1 << 4) +#define INT_BUF_WRITE_EN (1 << 3) +#define INT_END_CMD_RES_EN (1 << 2) +#define INT_WRITE_OP_DONE_EN (1 << 1) +#define INT_READ_OP_EN (1 << 0) + +struct mxcmci_host { + struct mmc_host *mmc; + struct resource *res; + void __iomem *base; + int irq; + int detect_irq; + int dma; + int do_dma; + unsigned int power_mode; + struct imxmmc_platform_data *pdata; + + struct mmc_request *req; + struct mmc_command *cmd; + struct mmc_data *data; + + unsigned int dma_nents; + unsigned int datasize; + unsigned int dma_dir; + + u16 rev_no; + unsigned int cmdat; + + struct clk *clk; + + int clock; + + struct work_struct datawork; +}; + +static inline int mxcmci_use_dma(struct mxcmci_host *host) +{ + return host->do_dma; +} + +static void mxcmci_softreset(struct mxcmci_host *host) +{ + int i; + + /* reset sequence */ + writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK); + writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK, + host->base + MMC_REG_STR_STP_CLK); + + for (i = 0; i < 8; i++) + writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + + writew(0xff, host->base + MMC_REG_RES_TO); +} + +static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) +{ + unsigned int nob = data->blocks; + unsigned int blksz = data->blksz; + unsigned int datasize = nob * blksz; +#ifdef HAS_DMA + struct scatterlist *sg; + int i; +#endif + if (data->flags & MMC_DATA_STREAM) + nob = 0xffff; + + host->data = data; + data->bytes_xfered = 0; + + writew(nob, host->base + MMC_REG_NOB); + writew(blksz, host->base + MMC_REG_BLK_LEN); + host->datasize = datasize; + +#ifdef HAS_DMA + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) { + host->do_dma = 0; + return; + } + } + + if (data->flags & MMC_DATA_READ) { + host->dma_dir = DMA_FROM_DEVICE; + host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + + imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_READ); + } else { + host->dma_dir = DMA_TO_DEVICE; + host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + + imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_WRITE); + } + + wmb(); + + imx_dma_enable(host->dma); +#endif /* HAS_DMA */ +} + +static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, + unsigned int cmdat) +{ + WARN_ON(host->cmd != NULL); + host->cmd = cmd; + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_R1: /* short CRC, OPCODE */ + case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */ + cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC; + break; + case MMC_RSP_R2: /* long 136 bit + CRC */ + cmdat |= CMD_DAT_CONT_RESPONSE_136BIT; + break; + case MMC_RSP_R3: /* short */ + cmdat |= CMD_DAT_CONT_RESPONSE_48BIT; + break; + case MMC_RSP_NONE: + break; + default: + dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n", + mmc_resp_type(cmd)); + cmd->error = -EINVAL; + return -EINVAL; + } + + if (mxcmci_use_dma(host)) + writel(INT_READ_OP_EN | INT_WRITE_OP_DONE_EN | + INT_END_CMD_RES_EN, + host->base + MMC_REG_INT_CNTR); + else + writel(INT_END_CMD_RES_EN, host->base + MMC_REG_INT_CNTR); + + writew(cmd->opcode, host->base + MMC_REG_CMD); + writel(cmd->arg, host->base + MMC_REG_ARG); + writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT); + + return 0; +} + +static void mxcmci_finish_request(struct mxcmci_host *host, + struct mmc_request *req) +{ + writel(0, host->base + MMC_REG_INT_CNTR); + + host->req = NULL; + host->cmd = NULL; + host->data = NULL; + + mmc_request_done(host->mmc, req); +} + +static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_data *data = host->data; + int data_error; + +#ifdef HAS_DMA + if (mxcmci_use_dma(host)) { + imx_dma_disable(host->dma); + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents, + host->dma_dir); + } +#endif + + if (stat & STATUS_ERR_MASK) { + dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", + stat); + if (stat & STATUS_CRC_READ_ERR) { + data->error = -EILSEQ; + } else if (stat & STATUS_CRC_WRITE_ERR) { + u32 err_code = (stat >> 9) & 0x3; + if (err_code == 2) /* No CRC response */ + data->error = -ETIMEDOUT; + else + data->error = -EILSEQ; + } else if (stat & STATUS_TIME_OUT_READ) { + data->error = -ETIMEDOUT; + } else { + data->error = -EIO; + } + } else { + data->bytes_xfered = host->datasize; + } + + data_error = data->error; + + host->data = NULL; + + return data_error; +} + +static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_command *cmd = host->cmd; + int i; + u32 a, b, c; + + if (!cmd) + return; + + if (stat & STATUS_TIME_OUT_RESP) { + dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n"); + cmd->error = -ETIMEDOUT; + } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) { + dev_dbg(mmc_dev(host->mmc), "cmd crc error\n"); + cmd->error = -EILSEQ; + } + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + for (i = 0; i < 4; i++) { + a = readw(host->base + MMC_REG_RES_FIFO); + b = readw(host->base + MMC_REG_RES_FIFO); + cmd->resp[i] = a << 16 | b; + } + } else { + a = readw(host->base + MMC_REG_RES_FIFO); + b = readw(host->base + MMC_REG_RES_FIFO); + c = readw(host->base + MMC_REG_RES_FIFO); + cmd->resp[0] = a << 24 | b << 8 | c >> 8; + } + } +} + +static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask) +{ + u32 stat; + unsigned long timeout = jiffies + HZ; + + do { + stat = readl(host->base + MMC_REG_STATUS); + if (stat & STATUS_ERR_MASK) + return stat; + if (time_after(jiffies, timeout)) + return STATUS_TIME_OUT_READ; + if (stat & mask) + return 0; + cpu_relax(); + } while (1); +} + +static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes) +{ + unsigned int stat; + u32 *buf = _buf; + + while (bytes > 3) { + stat = mxcmci_poll_status(host, + STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE); + if (stat) + return stat; + *buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS); + bytes -= 4; + } + + if (bytes) { + u8 *b = (u8 *)buf; + u32 tmp; + + stat = mxcmci_poll_status(host, + STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE); + if (stat) + return stat; + tmp = readl(host->base + MMC_REG_BUFFER_ACCESS); + memcpy(b, &tmp, bytes); + } + + return 0; +} + +static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes) +{ + unsigned int stat; + u32 *buf = _buf; + + while (bytes > 3) { + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS); + bytes -= 4; + } + + if (bytes) { + u8 *b = (u8 *)buf; + u32 tmp; + + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + + memcpy(&tmp, b, bytes); + writel(tmp, host->base + MMC_REG_BUFFER_ACCESS); + } + + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + + return 0; +} + +static int mxcmci_transfer_data(struct mxcmci_host *host) +{ + struct mmc_data *data = host->req->data; + struct scatterlist *sg; + int stat, i; + + host->datasize = 0; + + host->data = data; + host->datasize = 0; + + if (data->flags & MMC_DATA_READ) { + for_each_sg(data->sg, sg, data->sg_len, i) { + stat = mxcmci_pull(host, sg_virt(sg), sg->length); + if (stat) + return stat; + host->datasize += sg->length; + } + } else { + for_each_sg(data->sg, sg, data->sg_len, i) { + stat = mxcmci_push(host, sg_virt(sg), sg->length); + if (stat) + return stat; + host->datasize += sg->length; + } + stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE); + if (stat) + return stat; + } + return 0; +} + +static void mxcmci_datawork(struct work_struct *work) +{ + struct mxcmci_host *host = container_of(work, struct mxcmci_host, + datawork); + int datastat = mxcmci_transfer_data(host); + mxcmci_finish_data(host, datastat); + + if (host->req->stop) { + if (mxcmci_start_cmd(host, host->req->stop, 0)) { + mxcmci_finish_request(host, host->req); + return; + } + } else { + mxcmci_finish_request(host, host->req); + } +} + +#ifdef HAS_DMA +static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_data *data = host->data; + int data_error; + + if (!data) + return; + + data_error = mxcmci_finish_data(host, stat); + + mxcmci_read_response(host, stat); + host->cmd = NULL; + + if (host->req->stop) { + if (mxcmci_start_cmd(host, host->req->stop, 0)) { + mxcmci_finish_request(host, host->req); + return; + } + } else { + mxcmci_finish_request(host, host->req); + } +} +#endif /* HAS_DMA */ + +static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat) +{ + mxcmci_read_response(host, stat); + host->cmd = NULL; + + if (!host->data && host->req) { + mxcmci_finish_request(host, host->req); + return; + } + + /* For the DMA case the DMA engine handles the data transfer + * automatically. For non DMA we have to to it ourselves. + * Don't do it in interrupt context though. + */ + if (!mxcmci_use_dma(host) && host->data) + schedule_work(&host->datawork); + +} + +static irqreturn_t mxcmci_irq(int irq, void *devid) +{ + struct mxcmci_host *host = devid; + u32 stat; + + stat = readl(host->base + MMC_REG_STATUS); + writel(stat, host->base + MMC_REG_STATUS); + + dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat); + + if (stat & STATUS_END_CMD_RESP) + mxcmci_cmd_done(host, stat); +#ifdef HAS_DMA + if (mxcmci_use_dma(host) && + (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) + mxcmci_data_done(host, stat); +#endif + return IRQ_HANDLED; +} + +static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct mxcmci_host *host = mmc_priv(mmc); + unsigned int cmdat = host->cmdat; + + WARN_ON(host->req != NULL); + + host->req = req; + host->cmdat &= ~CMD_DAT_CONT_INIT; +#ifdef HAS_DMA + host->do_dma = 1; +#endif + if (req->data) { + mxcmci_setup_data(host, req->data); + + cmdat |= CMD_DAT_CONT_DATA_ENABLE; + + if (req->data->flags & MMC_DATA_WRITE) + cmdat |= CMD_DAT_CONT_WRITE; + } + + if (mxcmci_start_cmd(host, req->cmd, cmdat)) + mxcmci_finish_request(host, req); +} + +static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios) +{ + unsigned int divider; + int prescaler = 0; + unsigned int clk_in = clk_get_rate(host->clk); + + while (prescaler <= 0x800) { + for (divider = 1; divider <= 0xF; divider++) { + int x; + + x = (clk_in / (divider + 1)); + + if (prescaler) + x /= (prescaler * 2); + + if (x <= clk_ios) + break; + } + if (divider < 0x10) + break; + + if (prescaler == 0) + prescaler = 1; + else + prescaler <<= 1; + } + + writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE); + + dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n", + prescaler, divider, clk_in, clk_ios); +} + +static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mxcmci_host *host = mmc_priv(mmc); +#ifdef HAS_DMA + unsigned int blen; + /* + * use burstlen of 64 in 4 bit mode (--> reg value 0) + * use burstlen of 16 in 1 bit mode (--> reg value 16) + */ + if (ios->bus_width == MMC_BUS_WIDTH_4) + blen = 0; + else + blen = 16; + + imx_dma_config_burstlen(host->dma, blen); +#endif + if (ios->bus_width == MMC_BUS_WIDTH_4) + host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; + else + host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4; + + if (host->power_mode != ios->power_mode) { + if (host->pdata && host->pdata->setpower) + host->pdata->setpower(mmc_dev(mmc), ios->vdd); + host->power_mode = ios->power_mode; + if (ios->power_mode == MMC_POWER_ON) + host->cmdat |= CMD_DAT_CONT_INIT; + } + + if (ios->clock) { + mxcmci_set_clk_rate(host, ios->clock); + writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + } else { + writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK); + } + + host->clock = ios->clock; +} + +static irqreturn_t mxcmci_detect_irq(int irq, void *data) +{ + struct mmc_host *mmc = data; + + dev_dbg(mmc_dev(mmc), "%s\n", __func__); + + mmc_detect_change(mmc, msecs_to_jiffies(250)); + return IRQ_HANDLED; +} + +static int mxcmci_get_ro(struct mmc_host *mmc) +{ + struct mxcmci_host *host = mmc_priv(mmc); + + if (host->pdata && host->pdata->get_ro) + return !!host->pdata->get_ro(mmc_dev(mmc)); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; +} + + +static const struct mmc_host_ops mxcmci_ops = { + .request = mxcmci_request, + .set_ios = mxcmci_set_ios, + .get_ro = mxcmci_get_ro, +}; + +static int mxcmci_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct mxcmci_host *host = NULL; + struct resource *r; + int ret = 0, irq; + + printk(KERN_INFO "i.MX SDHC driver\n"); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (!r || irq < 0) + return -EINVAL; + + r = request_mem_region(r->start, resource_size(r), pdev->name); + if (!r) + return -EBUSY; + + mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto out_release_mem; + } + + mmc->ops = &mxcmci_ops; + mmc->caps = MMC_CAP_4_BIT_DATA; + + /* MMC core transfer sizes tunable parameters */ + mmc->max_hw_segs = 64; + mmc->max_phys_segs = 64; + mmc->max_blk_size = 2048; + mmc->max_blk_count = 65535; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_seg_size; + + host = mmc_priv(mmc); + host->base = ioremap(r->start, resource_size(r)); + if (!host->base) { + ret = -ENOMEM; + goto out_free; + } + + host->mmc = mmc; + host->pdata = pdev->dev.platform_data; + + if (host->pdata && host->pdata->ocr_avail) + mmc->ocr_avail = host->pdata->ocr_avail; + else + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + host->res = r; + host->irq = irq; + + host->clk = clk_get(&pdev->dev, "sdhc_clk"); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto out_iounmap; + } + clk_enable(host->clk); + + mxcmci_softreset(host); + + host->rev_no = readw(host->base + MMC_REG_REV_NO); + if (host->rev_no != 0x400) { + ret = -ENODEV; + dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n", + host->rev_no); + goto out_clk_put; + } + + mmc->f_min = clk_get_rate(host->clk) >> 7; + mmc->f_max = clk_get_rate(host->clk) >> 1; + + /* recommended in data sheet */ + writew(0x2db4, host->base + MMC_REG_READ_TO); + + writel(0, host->base + MMC_REG_INT_CNTR); + +#ifdef HAS_DMA + host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW); + if (host->dma < 0) { + dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n"); + ret = -EBUSY; + goto out_clk_put; + } + + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!r) { + ret = -EINVAL; + goto out_free_dma; + } + + ret = imx_dma_config_channel(host->dma, + IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO, + IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, + r->start, 0); + if (ret) { + dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n"); + goto out_free_dma; + } +#endif + INIT_WORK(&host->datawork, mxcmci_datawork); + + ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host); + if (ret) + goto out_free_dma; + + platform_set_drvdata(pdev, mmc); + + if (host->pdata && host->pdata->init) { + ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq, + host->mmc); + if (ret) + goto out_free_irq; + } + + mmc_add_host(mmc); + + return 0; + +out_free_irq: + free_irq(host->irq, host); +out_free_dma: +#ifdef HAS_DMA + imx_dma_free(host->dma); +#endif +out_clk_put: + clk_disable(host->clk); + clk_put(host->clk); +out_iounmap: + iounmap(host->base); +out_free: + mmc_free_host(mmc); +out_release_mem: + release_mem_region(host->res->start, resource_size(host->res)); + return ret; +} + +static int mxcmci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct mxcmci_host *host = mmc_priv(mmc); + + platform_set_drvdata(pdev, NULL); + + mmc_remove_host(mmc); + + if (host->pdata && host->pdata->exit) + host->pdata->exit(&pdev->dev, mmc); + + free_irq(host->irq, host); + iounmap(host->base); +#ifdef HAS_DMA + imx_dma_free(host->dma); +#endif + clk_disable(host->clk); + clk_put(host->clk); + + release_mem_region(host->res->start, resource_size(host->res)); + release_resource(host->res); + + mmc_free_host(mmc); + + return 0; +} + +#ifdef CONFIG_PM +static int mxcmci_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + int ret = 0; + + if (mmc) + ret = mmc_suspend_host(mmc, state); + + return ret; +} + +static int mxcmci_resume(struct platform_device *dev) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + struct mxcmci_host *host; + int ret = 0; + + if (mmc) { + host = mmc_priv(mmc); + ret = mmc_resume_host(mmc); + } + + return ret; +} +#else +#define mxcmci_suspend NULL +#define mxcmci_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver mxcmci_driver = { + .probe = mxcmci_probe, + .remove = mxcmci_remove, + .suspend = mxcmci_suspend, + .resume = mxcmci_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + } +}; + +static int __init mxcmci_init(void) +{ + return platform_driver_register(&mxcmci_driver); +} + +static void __exit mxcmci_exit(void) +{ + platform_driver_unregister(&mxcmci_driver); +} + +module_init(mxcmci_init); +module_exit(mxcmci_exit); + +MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); +MODULE_AUTHOR("Sascha Hauer, Pengutronix"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-mmc"); diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c new file mode 100644 index 00000000000..a631c81dce1 --- /dev/null +++ b/drivers/mmc/host/omap_hsmmc.c @@ -0,0 +1,1280 @@ +/* + * drivers/mmc/host/omap_hsmmc.c + * + * Driver for OMAP2430/3430 MMC controller. + * + * Copyright (C) 2007 Texas Instruments. + * + * Authors: + * Syed Mohammed Khasim <x0khasim@ti.com> + * Madhusudhan <madhu.cr@ti.com> + * Mohit Jalori <mjalori@ti.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/io.h> +#include <linux/semaphore.h> +#include <mach/dma.h> +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/mmc.h> +#include <mach/cpu.h> + +/* OMAP HSMMC Host Controller Registers */ +#define OMAP_HSMMC_SYSCONFIG 0x0010 +#define OMAP_HSMMC_CON 0x002C +#define OMAP_HSMMC_BLK 0x0104 +#define OMAP_HSMMC_ARG 0x0108 +#define OMAP_HSMMC_CMD 0x010C +#define OMAP_HSMMC_RSP10 0x0110 +#define OMAP_HSMMC_RSP32 0x0114 +#define OMAP_HSMMC_RSP54 0x0118 +#define OMAP_HSMMC_RSP76 0x011C +#define OMAP_HSMMC_DATA 0x0120 +#define OMAP_HSMMC_HCTL 0x0128 +#define OMAP_HSMMC_SYSCTL 0x012C +#define OMAP_HSMMC_STAT 0x0130 +#define OMAP_HSMMC_IE 0x0134 +#define OMAP_HSMMC_ISE 0x0138 +#define OMAP_HSMMC_CAPA 0x0140 + +#define VS18 (1 << 26) +#define VS30 (1 << 25) +#define SDVS18 (0x5 << 9) +#define SDVS30 (0x6 << 9) +#define SDVS33 (0x7 << 9) +#define SDVSCLR 0xFFFFF1FF +#define SDVSDET 0x00000400 +#define AUTOIDLE 0x1 +#define SDBP (1 << 8) +#define DTO 0xe +#define ICE 0x1 +#define ICS 0x2 +#define CEN (1 << 2) +#define CLKD_MASK 0x0000FFC0 +#define CLKD_SHIFT 6 +#define DTO_MASK 0x000F0000 +#define DTO_SHIFT 16 +#define INT_EN_MASK 0x307F0033 +#define INIT_STREAM (1 << 1) +#define DP_SELECT (1 << 21) +#define DDIR (1 << 4) +#define DMA_EN 0x1 +#define MSBS (1 << 5) +#define BCE (1 << 1) +#define FOUR_BIT (1 << 1) +#define CC 0x1 +#define TC 0x02 +#define OD 0x1 +#define ERR (1 << 15) +#define CMD_TIMEOUT (1 << 16) +#define DATA_TIMEOUT (1 << 20) +#define CMD_CRC (1 << 17) +#define DATA_CRC (1 << 21) +#define CARD_ERR (1 << 28) +#define STAT_CLEAR 0xFFFFFFFF +#define INIT_STREAM_CMD 0x00000000 +#define DUAL_VOLT_OCR_BIT 7 +#define SRC (1 << 25) +#define SRD (1 << 26) + +/* + * FIXME: Most likely all the data using these _DEVID defines should come + * from the platform_data, or implemented in controller and slot specific + * functions. + */ +#define OMAP_MMC1_DEVID 0 +#define OMAP_MMC2_DEVID 1 + +#define OMAP_MMC_DATADIR_NONE 0 +#define OMAP_MMC_DATADIR_READ 1 +#define OMAP_MMC_DATADIR_WRITE 2 +#define MMC_TIMEOUT_MS 20 +#define OMAP_MMC_MASTER_CLOCK 96000000 +#define DRIVER_NAME "mmci-omap-hs" + +/* + * One controller can have multiple slots, like on some omap boards using + * omap.c controller driver. Luckily this is not currently done on any known + * omap_hsmmc.c device. + */ +#define mmc_slot(host) (host->pdata->slots[host->slot_id]) + +/* + * MMC Host controller read/write API's + */ +#define OMAP_HSMMC_READ(base, reg) \ + __raw_readl((base) + OMAP_HSMMC_##reg) + +#define OMAP_HSMMC_WRITE(base, reg, val) \ + __raw_writel((val), (base) + OMAP_HSMMC_##reg) + +struct mmc_omap_host { + struct device *dev; + struct mmc_host *mmc; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct clk *fclk; + struct clk *iclk; + struct clk *dbclk; + struct semaphore sem; + struct work_struct mmc_carddetect_work; + void __iomem *base; + resource_size_t mapbase; + unsigned int id; + unsigned int dma_len; + unsigned int dma_dir; + unsigned char bus_mode; + unsigned char datadir; + u32 *buffer; + u32 bytesleft; + int suspended; + int irq; + int carddetect; + int use_dma, dma_ch; + int initstr; + int slot_id; + int dbclk_enabled; + struct omap_mmc_platform_data *pdata; +}; + +/* + * Stop clock to the card + */ +static void omap_mmc_stop_clock(struct mmc_omap_host *host) +{ + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); + if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) + dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); +} + +/* + * Send init stream sequence to card + * before sending IDLE command + */ +static void send_init_stream(struct mmc_omap_host *host) +{ + int reg = 0; + unsigned long timeout; + + disable_irq(host->irq); + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM); + OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD); + + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((reg != CC) && time_before(jiffies, timeout)) + reg = OMAP_HSMMC_READ(host->base, STAT) & CC; + + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM); + enable_irq(host->irq); +} + +static inline +int mmc_omap_cover_is_closed(struct mmc_omap_host *host) +{ + int r = 1; + + if (host->pdata->slots[host->slot_id].get_cover_state) + r = host->pdata->slots[host->slot_id].get_cover_state(host->dev, + host->slot_id); + return r; +} + +static ssize_t +mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); + struct mmc_omap_host *host = mmc_priv(mmc); + + return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" : + "open"); +} + +static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL); + +static ssize_t +mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id]; + + return sprintf(buf, "slot:%s\n", slot.name); +} + +static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL); + +/* + * Configure the response type and send the cmd. + */ +static void +mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd, + struct mmc_data *data) +{ + int cmdreg = 0, resptype = 0, cmdtype = 0; + + dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", + mmc_hostname(host->mmc), cmd->opcode, cmd->arg); + host->cmd = cmd; + + /* + * Clear status bits and enable interrupts + */ + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); + OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) + resptype = 1; + else + resptype = 2; + } + + /* + * Unlike OMAP1 controller, the cmdtype does not seem to be based on + * ac, bc, adtc, bcr. Only commands ending an open ended transfer need + * a val of 0x3, rest 0x0. + */ + if (cmd == host->mrq->stop) + cmdtype = 0x3; + + cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); + + if (data) { + cmdreg |= DP_SELECT | MSBS | BCE; + if (data->flags & MMC_DATA_READ) + cmdreg |= DDIR; + else + cmdreg &= ~(DDIR); + } + + if (host->use_dma) + cmdreg |= DMA_EN; + + OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); + OMAP_HSMMC_WRITE(host->base, CMD, cmdreg); +} + +/* + * Notify the transfer complete to MMC core + */ +static void +mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) +{ + host->data = NULL; + + if (host->use_dma && host->dma_ch != -1) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, + host->dma_dir); + + host->datadir = OMAP_MMC_DATADIR_NONE; + + if (!data->error) + data->bytes_xfered += data->blocks * (data->blksz); + else + data->bytes_xfered = 0; + + if (!data->stop) { + host->mrq = NULL; + mmc_request_done(host->mmc, data->mrq); + return; + } + mmc_omap_start_command(host, data->stop, NULL); +} + +/* + * Notify the core about command completion + */ +static void +mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd) +{ + host->cmd = NULL; + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* response type 2 */ + cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10); + cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32); + cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54); + cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76); + } else { + /* response types 1, 1b, 3, 4, 5, 6 */ + cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10); + } + } + if (host->data == NULL || cmd->error) { + host->mrq = NULL; + mmc_request_done(host->mmc, cmd->mrq); + } +} + +/* + * DMA clean up for command errors + */ +static void mmc_dma_cleanup(struct mmc_omap_host *host) +{ + host->data->error = -ETIMEDOUT; + + if (host->use_dma && host->dma_ch != -1) { + dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, + host->dma_dir); + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + up(&host->sem); + } + host->data = NULL; + host->datadir = OMAP_MMC_DATADIR_NONE; +} + +/* + * Readable error output + */ +#ifdef CONFIG_MMC_DEBUG +static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status) +{ + /* --- means reserved bit without definition at documentation */ + static const char *mmc_omap_status_bits[] = { + "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ", + "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC", + "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---", + "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---" + }; + char res[256]; + char *buf = res; + int len, i; + + len = sprintf(buf, "MMC IRQ 0x%x :", status); + buf += len; + + for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++) + if (status & (1 << i)) { + len = sprintf(buf, " %s", mmc_omap_status_bits[i]); + buf += len; + } + + dev_dbg(mmc_dev(host->mmc), "%s\n", res); +} +#endif /* CONFIG_MMC_DEBUG */ + +/* + * MMC controller internal state machines reset + * + * Used to reset command or data internal state machines, using respectively + * SRC or SRD bit of SYSCTL register + * Can be called from interrupt context + */ +static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host, + unsigned long bit) +{ + unsigned long i = 0; + unsigned long limit = (loops_per_jiffy * + msecs_to_jiffies(MMC_TIMEOUT_MS)); + + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | bit); + + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && + (i++ < limit)) + cpu_relax(); + + if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit) + dev_err(mmc_dev(host->mmc), + "Timeout waiting on controller reset in %s\n", + __func__); +} + +/* + * MMC controller IRQ handler + */ +static irqreturn_t mmc_omap_irq(int irq, void *dev_id) +{ + struct mmc_omap_host *host = dev_id; + struct mmc_data *data; + int end_cmd = 0, end_trans = 0, status; + + if (host->cmd == NULL && host->data == NULL) { + OMAP_HSMMC_WRITE(host->base, STAT, + OMAP_HSMMC_READ(host->base, STAT)); + return IRQ_HANDLED; + } + + data = host->data; + status = OMAP_HSMMC_READ(host->base, STAT); + dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); + + if (status & ERR) { +#ifdef CONFIG_MMC_DEBUG + mmc_omap_report_irq(host, status); +#endif + if ((status & CMD_TIMEOUT) || + (status & CMD_CRC)) { + if (host->cmd) { + if (status & CMD_TIMEOUT) { + mmc_omap_reset_controller_fsm(host, SRC); + host->cmd->error = -ETIMEDOUT; + } else { + host->cmd->error = -EILSEQ; + } + end_cmd = 1; + } + if (host->data) { + mmc_dma_cleanup(host); + mmc_omap_reset_controller_fsm(host, SRD); + } + } + if ((status & DATA_TIMEOUT) || + (status & DATA_CRC)) { + if (host->data) { + if (status & DATA_TIMEOUT) + mmc_dma_cleanup(host); + else + host->data->error = -EILSEQ; + mmc_omap_reset_controller_fsm(host, SRD); + end_trans = 1; + } + } + if (status & CARD_ERR) { + dev_dbg(mmc_dev(host->mmc), + "Ignoring card err CMD%d\n", host->cmd->opcode); + if (host->cmd) + end_cmd = 1; + if (host->data) + end_trans = 1; + } + } + + OMAP_HSMMC_WRITE(host->base, STAT, status); + + if (end_cmd || (status & CC)) + mmc_omap_cmd_done(host, host->cmd); + if (end_trans || (status & TC)) + mmc_omap_xfer_done(host, data); + + return IRQ_HANDLED; +} + +/* + * Switch MMC interface voltage ... only relevant for MMC1. + * + * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver. + * The MMC2 transceiver controls are used instead of DAT4..DAT7. + * Some chips, like eMMC ones, use internal transceivers. + */ +static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) +{ + u32 reg_val = 0; + int ret; + + if (host->id != OMAP_MMC1_DEVID) + return 0; + + /* Disable the clocks */ + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_disable(host->dbclk); + + /* Turn the power off */ + ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); + if (ret != 0) + goto err; + + /* Turn the power ON with given VDD 1.8 or 3.0v */ + ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); + if (ret != 0) + goto err; + + clk_enable(host->fclk); + clk_enable(host->iclk); + clk_enable(host->dbclk); + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); + reg_val = OMAP_HSMMC_READ(host->base, HCTL); + + /* + * If a MMC dual voltage card is detected, the set_ios fn calls + * this fn with VDD bit set for 1.8V. Upon card removal from the + * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. + * + * Cope with a bit of slop in the range ... per data sheets: + * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max, + * but recommended values are 1.71V to 1.89V + * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max, + * but recommended values are 2.7V to 3.3V + * + * Board setup code shouldn't permit anything very out-of-range. + * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the + * middle range) but VSIM can't power DAT4..DAT7 at more than 3V. + */ + if ((1 << vdd) <= MMC_VDD_23_24) + reg_val |= SDVS18; + else + reg_val |= SDVS30; + + OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | SDBP); + + return 0; +err: + dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); + return ret; +} + +/* + * Work Item to notify the core about card insertion/removal + */ +static void mmc_omap_detect(struct work_struct *work) +{ + struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, + mmc_carddetect_work); + struct omap_mmc_slot_data *slot = &mmc_slot(host); + + host->carddetect = slot->card_detect(slot->card_detect_irq); + + sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); + if (host->carddetect) { + mmc_detect_change(host->mmc, (HZ * 200) / 1000); + } else { + mmc_omap_reset_controller_fsm(host, SRD); + mmc_detect_change(host->mmc, (HZ * 50) / 1000); + } +} + +/* + * ISR for handling card insertion and removal + */ +static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id) +{ + struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id; + + schedule_work(&host->mmc_carddetect_work); + + return IRQ_HANDLED; +} + +/* + * DMA call back function + */ +static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) +{ + struct mmc_omap_host *host = data; + + if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ) + dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n"); + + if (host->dma_ch < 0) + return; + + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + /* + * DMA Callback: run in interrupt context. + * mutex_unlock will through a kernel warning if used. + */ + up(&host->sem); +} + +/* + * Configure dma src and destination parameters + */ +static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host, + struct mmc_data *data) +{ + if (sync_dir == 0) { + omap_set_dma_dest_params(host->dma_ch, 0, + OMAP_DMA_AMODE_CONSTANT, + (host->mapbase + OMAP_HSMMC_DATA), 0, 0); + omap_set_dma_src_params(host->dma_ch, 0, + OMAP_DMA_AMODE_POST_INC, + sg_dma_address(&data->sg[0]), 0, 0); + } else { + omap_set_dma_src_params(host->dma_ch, 0, + OMAP_DMA_AMODE_CONSTANT, + (host->mapbase + OMAP_HSMMC_DATA), 0, 0); + omap_set_dma_dest_params(host->dma_ch, 0, + OMAP_DMA_AMODE_POST_INC, + sg_dma_address(&data->sg[0]), 0, 0); + } + return 0; +} +/* + * Routine to configure and start DMA for the MMC card + */ +static int +mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req) +{ + int sync_dev, sync_dir = 0; + int dma_ch = 0, ret = 0, err = 1; + struct mmc_data *data = req->data; + + /* + * If for some reason the DMA transfer is still active, + * we wait for timeout period and free the dma + */ + if (host->dma_ch != -1) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(100); + if (down_trylock(&host->sem)) { + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + up(&host->sem); + return err; + } + } else { + if (down_trylock(&host->sem)) + return err; + } + + if (!(data->flags & MMC_DATA_WRITE)) { + host->dma_dir = DMA_FROM_DEVICE; + if (host->id == OMAP_MMC1_DEVID) + sync_dev = OMAP24XX_DMA_MMC1_RX; + else + sync_dev = OMAP24XX_DMA_MMC2_RX; + } else { + host->dma_dir = DMA_TO_DEVICE; + if (host->id == OMAP_MMC1_DEVID) + sync_dev = OMAP24XX_DMA_MMC1_TX; + else + sync_dev = OMAP24XX_DMA_MMC2_TX; + } + + ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb, + host, &dma_ch); + if (ret != 0) { + dev_dbg(mmc_dev(host->mmc), + "%s: omap_request_dma() failed with %d\n", + mmc_hostname(host->mmc), ret); + return ret; + } + + host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + host->dma_ch = dma_ch; + + if (!(data->flags & MMC_DATA_WRITE)) + mmc_omap_config_dma_param(1, host, data); + else + mmc_omap_config_dma_param(0, host, data); + + if ((data->blksz % 4) == 0) + omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, + (data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME, + sync_dev, sync_dir); + else + /* REVISIT: The MMC buffer increments only when MSB is written. + * Return error for blksz which is non multiple of four. + */ + return -EINVAL; + + omap_start_dma(dma_ch); + return 0; +} + +static void set_data_timeout(struct mmc_omap_host *host, + struct mmc_request *req) +{ + unsigned int timeout, cycle_ns; + uint32_t reg, clkd, dto = 0; + + reg = OMAP_HSMMC_READ(host->base, SYSCTL); + clkd = (reg & CLKD_MASK) >> CLKD_SHIFT; + if (clkd == 0) + clkd = 1; + + cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); + timeout = req->data->timeout_ns / cycle_ns; + timeout += req->data->timeout_clks; + if (timeout) { + while ((timeout & 0x80000000) == 0) { + dto += 1; + timeout <<= 1; + } + dto = 31 - dto; + timeout <<= 1; + if (timeout && dto) + dto += 1; + if (dto >= 13) + dto -= 13; + else + dto = 0; + if (dto > 14) + dto = 14; + } + + reg &= ~DTO_MASK; + reg |= dto << DTO_SHIFT; + OMAP_HSMMC_WRITE(host->base, SYSCTL, reg); +} + +/* + * Configure block length for MMC/SD cards and initiate the transfer. + */ +static int +mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) +{ + int ret; + host->data = req->data; + + if (req->data == NULL) { + host->datadir = OMAP_MMC_DATADIR_NONE; + OMAP_HSMMC_WRITE(host->base, BLK, 0); + return 0; + } + + OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) + | (req->data->blocks << 16)); + set_data_timeout(host, req); + + host->datadir = (req->data->flags & MMC_DATA_WRITE) ? + OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ; + + if (host->use_dma) { + ret = mmc_omap_start_dma_transfer(host, req); + if (ret != 0) { + dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n"); + return ret; + } + } + return 0; +} + +/* + * Request function. for read/write operation + */ +static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + + WARN_ON(host->mrq != NULL); + host->mrq = req; + mmc_omap_prepare_data(host, req); + mmc_omap_start_command(host, req->cmd, req->data); +} + + +/* Routine to configure clock values. Exposed API to core */ +static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + u16 dsor = 0; + unsigned long regval; + unsigned long timeout; + + switch (ios->power_mode) { + case MMC_POWER_OFF: + mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); + /* + * Reset interface voltage to 3V if it's 1.8V now; + * only relevant on MMC-1, the others always use 1.8V. + * + * REVISIT: If we are able to detect cards after unplugging + * a 1.8V card, this code should not be needed. + */ + if (host->id != OMAP_MMC1_DEVID) + break; + if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + int vdd = fls(host->mmc->ocr_avail) - 1; + if (omap_mmc_switch_opcond(host, vdd) != 0) + host->mmc->ios.vdd = vdd; + } + break; + case MMC_POWER_UP: + mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd); + break; + } + + switch (mmc->ios.bus_width) { + case MMC_BUS_WIDTH_4: + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); + break; + case MMC_BUS_WIDTH_1: + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); + break; + } + + if (host->id == OMAP_MMC1_DEVID) { + /* Only MMC1 can interface at 3V without some flavor + * of external transceiver; but they all handle 1.8V. + */ + if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && + (ios->vdd == DUAL_VOLT_OCR_BIT)) { + /* + * The mmc_select_voltage fn of the core does + * not seem to set the power_mode to + * MMC_POWER_UP upon recalculating the voltage. + * vdd 1.8v. + */ + if (omap_mmc_switch_opcond(host, ios->vdd) != 0) + dev_dbg(mmc_dev(host->mmc), + "Switch operation failed\n"); + } + } + + if (ios->clock) { + dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; + if (dsor < 1) + dsor = 1; + + if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) + dsor++; + + if (dsor > 250) + dsor = 250; + } + omap_mmc_stop_clock(host); + regval = OMAP_HSMMC_READ(host->base, SYSCTL); + regval = regval & ~(CLKD_MASK); + regval = regval | (dsor << 6) | (DTO << 16); + OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); + + /* Wait till the ICS bit is set */ + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2 + && time_before(jiffies, timeout)) + msleep(1); + + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); + + if (ios->power_mode == MMC_POWER_ON) + send_init_stream(host); + + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) | OD); +} + +static int omap_hsmmc_get_cd(struct mmc_host *mmc) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_platform_data *pdata = host->pdata; + + if (!pdata->slots[0].card_detect) + return -ENOSYS; + return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq); +} + +static int omap_hsmmc_get_ro(struct mmc_host *mmc) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_platform_data *pdata = host->pdata; + + if (!pdata->slots[0].get_ro) + return -ENOSYS; + return pdata->slots[0].get_ro(host->dev, 0); +} + +static struct mmc_host_ops mmc_omap_ops = { + .request = omap_mmc_request, + .set_ios = omap_mmc_set_ios, + .get_cd = omap_hsmmc_get_cd, + .get_ro = omap_hsmmc_get_ro, + /* NYET -- enable_sdio_irq */ +}; + +static int __init omap_mmc_probe(struct platform_device *pdev) +{ + struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; + struct mmc_host *mmc; + struct mmc_omap_host *host = NULL; + struct resource *res; + int ret = 0, irq; + u32 hctl, capa; + + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform Data is missing\n"); + return -ENXIO; + } + + if (pdata->nr_slots == 0) { + dev_err(&pdev->dev, "No Slots\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (res == NULL || irq < 0) + return -ENXIO; + + res = request_mem_region(res->start, res->end - res->start + 1, + pdev->name); + if (res == NULL) + return -EBUSY; + + mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto err; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdata = pdata; + host->dev = &pdev->dev; + host->use_dma = 1; + host->dev->dma_mask = &pdata->dma_mask; + host->dma_ch = -1; + host->irq = irq; + host->id = pdev->id; + host->slot_id = 0; + host->mapbase = res->start; + host->base = ioremap(host->mapbase, SZ_4K); + + platform_set_drvdata(pdev, host); + INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect); + + mmc->ops = &mmc_omap_ops; + mmc->f_min = 400000; + mmc->f_max = 52000000; + + sema_init(&host->sem, 1); + + host->iclk = clk_get(&pdev->dev, "mmchs_ick"); + if (IS_ERR(host->iclk)) { + ret = PTR_ERR(host->iclk); + host->iclk = NULL; + goto err1; + } + host->fclk = clk_get(&pdev->dev, "mmchs_fck"); + if (IS_ERR(host->fclk)) { + ret = PTR_ERR(host->fclk); + host->fclk = NULL; + clk_put(host->iclk); + goto err1; + } + + if (clk_enable(host->fclk) != 0) { + clk_put(host->iclk); + clk_put(host->fclk); + goto err1; + } + + if (clk_enable(host->iclk) != 0) { + clk_disable(host->fclk); + clk_put(host->iclk); + clk_put(host->fclk); + goto err1; + } + + host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); + /* + * MMC can still work without debounce clock. + */ + if (IS_ERR(host->dbclk)) + dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n"); + else + if (clk_enable(host->dbclk) != 0) + dev_dbg(mmc_dev(host->mmc), "Enabling debounce" + " clk failed\n"); + else + host->dbclk_enabled = 1; + +#ifdef CONFIG_MMC_BLOCK_BOUNCE + mmc->max_phys_segs = 1; + mmc->max_hw_segs = 1; +#endif + mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ + mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; + + mmc->ocr_avail = mmc_slot(host).ocr_mask; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; + + if (pdata->slots[host->slot_id].wires >= 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; + + /* Only MMC1 supports 3.0V */ + if (host->id == OMAP_MMC1_DEVID) { + hctl = SDVS30; + capa = VS30 | VS18; + } else { + hctl = SDVS18; + capa = VS18; + } + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | hctl); + + OMAP_HSMMC_WRITE(host->base, CAPA, + OMAP_HSMMC_READ(host->base, CAPA) | capa); + + /* Set the controller to AUTO IDLE mode */ + OMAP_HSMMC_WRITE(host->base, SYSCONFIG, + OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); + + /* Set SD bus power bit */ + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | SDBP); + + /* Request IRQ for MMC operations */ + ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, + mmc_hostname(mmc), host); + if (ret) { + dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); + goto err_irq; + } + + if (pdata->init != NULL) { + if (pdata->init(&pdev->dev) != 0) { + dev_dbg(mmc_dev(host->mmc), + "Unable to configure MMC IRQs\n"); + goto err_irq_cd_init; + } + } + + /* Request IRQ for card detect */ + if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) { + ret = request_irq(mmc_slot(host).card_detect_irq, + omap_mmc_cd_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_DISABLED, + mmc_hostname(mmc), host); + if (ret) { + dev_dbg(mmc_dev(host->mmc), + "Unable to grab MMC CD IRQ\n"); + goto err_irq_cd; + } + } + + OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); + OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + + mmc_add_host(mmc); + + if (host->pdata->slots[host->slot_id].name != NULL) { + ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name); + if (ret < 0) + goto err_slot_name; + } + if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect && + host->pdata->slots[host->slot_id].get_cover_state) { + ret = device_create_file(&mmc->class_dev, + &dev_attr_cover_switch); + if (ret < 0) + goto err_cover_switch; + } + + return 0; + +err_cover_switch: + device_remove_file(&mmc->class_dev, &dev_attr_cover_switch); +err_slot_name: + mmc_remove_host(mmc); +err_irq_cd: + free_irq(mmc_slot(host).card_detect_irq, host); +err_irq_cd_init: + free_irq(host->irq, host); +err_irq: + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_put(host->fclk); + clk_put(host->iclk); + if (host->dbclk_enabled) { + clk_disable(host->dbclk); + clk_put(host->dbclk); + } + +err1: + iounmap(host->base); +err: + dev_dbg(mmc_dev(host->mmc), "Probe Failed\n"); + release_mem_region(res->start, res->end - res->start + 1); + if (host) + mmc_free_host(mmc); + return ret; +} + +static int omap_mmc_remove(struct platform_device *pdev) +{ + struct mmc_omap_host *host = platform_get_drvdata(pdev); + struct resource *res; + + if (host) { + mmc_remove_host(host->mmc); + if (host->pdata->cleanup) + host->pdata->cleanup(&pdev->dev); + free_irq(host->irq, host); + if (mmc_slot(host).card_detect_irq) + free_irq(mmc_slot(host).card_detect_irq, host); + flush_scheduled_work(); + + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_put(host->fclk); + clk_put(host->iclk); + if (host->dbclk_enabled) { + clk_disable(host->dbclk); + clk_put(host->dbclk); + } + + mmc_free_host(host->mmc); + iounmap(host->base); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, res->end - res->start + 1); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state) +{ + int ret = 0; + struct mmc_omap_host *host = platform_get_drvdata(pdev); + + if (host && host->suspended) + return 0; + + if (host) { + ret = mmc_suspend_host(host->mmc, state); + if (ret == 0) { + host->suspended = 1; + + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + + if (host->pdata->suspend) { + ret = host->pdata->suspend(&pdev->dev, + host->slot_id); + if (ret) + dev_dbg(mmc_dev(host->mmc), + "Unable to handle MMC board" + " level suspend\n"); + } + + if (host->id == OMAP_MMC1_DEVID + && !(OMAP_HSMMC_READ(host->base, HCTL) + & SDVSDET)) { + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + & SDVSCLR); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + | SDVS30); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + | SDBP); + } + + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_disable(host->dbclk); + } + + } + return ret; +} + +/* Routine to resume the MMC device */ +static int omap_mmc_resume(struct platform_device *pdev) +{ + int ret = 0; + struct mmc_omap_host *host = platform_get_drvdata(pdev); + + if (host && !host->suspended) + return 0; + + if (host) { + + ret = clk_enable(host->fclk); + if (ret) + goto clk_en_err; + + ret = clk_enable(host->iclk); + if (ret) { + clk_disable(host->fclk); + clk_put(host->fclk); + goto clk_en_err; + } + + if (clk_enable(host->dbclk) != 0) + dev_dbg(mmc_dev(host->mmc), + "Enabling debounce clk failed\n"); + + if (host->pdata->resume) { + ret = host->pdata->resume(&pdev->dev, host->slot_id); + if (ret) + dev_dbg(mmc_dev(host->mmc), + "Unmask interrupt failed\n"); + } + + /* Notify the core to resume the host */ + ret = mmc_resume_host(host->mmc); + if (ret == 0) + host->suspended = 0; + } + + return ret; + +clk_en_err: + dev_dbg(mmc_dev(host->mmc), + "Failed to enable MMC clocks during resume\n"); + return ret; +} + +#else +#define omap_mmc_suspend NULL +#define omap_mmc_resume NULL +#endif + +static struct platform_driver omap_mmc_driver = { + .probe = omap_mmc_probe, + .remove = omap_mmc_remove, + .suspend = omap_mmc_suspend, + .resume = omap_mmc_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init omap_mmc_init(void) +{ + /* Register the MMC driver */ + return platform_driver_register(&omap_mmc_driver); +} + +static void __exit omap_mmc_cleanup(void) +{ + /* Unregister MMC driver */ + platform_driver_unregister(&omap_mmc_driver); +} + +module_init(omap_mmc_init); +module_exit(omap_mmc_cleanup); + +MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 3c5483b75da..9702ad3774c 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -180,7 +180,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) else DALGN &= ~(1 << host->dma); DDADR(host->dma) = host->sg_dma; - DCSR(host->dma) = DCSR_RUN; + + /* + * workaround for erratum #91: + * only start DMA now if we are doing a read, + * otherwise we wait until CMD/RESP has finished + * before starting DMA. + */ + if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ) + DCSR(host->dma) = DCSR_RUN; } static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat) @@ -251,23 +259,28 @@ static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat) if (stat & STAT_TIME_OUT_RESPONSE) { cmd->error = -ETIMEDOUT; } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) { -#ifdef CONFIG_PXA27x /* * workaround for erratum #42: * Intel PXA27x Family Processor Specification Update Rev 001 * A bogus CRC error can appear if the msb of a 136 bit * response is a one. */ - if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) { + if (cpu_is_pxa27x() && + (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000)) pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode); - } else -#endif - cmd->error = -EILSEQ; + else + cmd->error = -EILSEQ; } pxamci_disable_irq(host, END_CMD_RES); if (host->data && !cmd->error) { pxamci_enable_irq(host, DATA_TRAN_DONE); + /* + * workaround for erratum #91, if doing write + * enable DMA late + */ + if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE) + DCSR(host->dma) = DCSR_RUN; } else { pxamci_finish_request(host, host->mrq); } diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c index be9e7b32b34..f6279051332 100644 --- a/drivers/mmc/host/ricoh_mmc.c +++ b/drivers/mmc/host/ricoh_mmc.c @@ -196,7 +196,7 @@ static void __devexit ricoh_mmc_remove(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); } -static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state) +static int ricoh_mmc_suspend_late(struct pci_dev *pdev, pm_message_t state) { struct pci_dev *fw_dev = NULL; @@ -210,7 +210,7 @@ static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state) return 0; } -static int ricoh_mmc_resume(struct pci_dev *pdev) +static int ricoh_mmc_resume_early(struct pci_dev *pdev) { struct pci_dev *fw_dev = NULL; @@ -229,8 +229,8 @@ static struct pci_driver ricoh_mmc_driver = { .id_table = pci_ids, .probe = ricoh_mmc_probe, .remove = __devexit_p(ricoh_mmc_remove), - .suspend = ricoh_mmc_suspend, - .resume = ricoh_mmc_resume, + .suspend_late = ricoh_mmc_suspend_late, + .resume_early = ricoh_mmc_resume_early, }; /*****************************************************************************\ diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index fcc98a4cce3..2db166b7096 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -20,7 +20,7 @@ #include <linux/irq.h> #include <linux/io.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/regs-sdi.h> #include <mach/regs-gpio.h> @@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host) to_ptr = host->base + host->sdidata; - while ((fifo = fifo_free(host))) { + while ((fifo = fifo_free(host)) > 3) { if (!host->pio_bytes) { res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); @@ -793,8 +793,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host, host->mem->start + host->sdidata); if (!setup_ok) { - s3c2410_dma_config(host->dma, 4, - (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); + s3c2410_dma_config(host->dma, 4, 0); s3c2410_dma_set_buffdone_fn(host->dma, s3cmci_dma_done_callback); s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index f07255cb17e..406da9a8d45 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -107,6 +107,7 @@ static const struct sdhci_pci_fixes sdhci_ene_714 = { static const struct sdhci_pci_fixes sdhci_cafe = { .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_NO_BUSY_IRQ | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, }; @@ -144,8 +145,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | SDHCI_QUIRK_RESET_AFTER_REQUEST | - SDHCI_QUIRK_BROKEN_SMALL_PIO | - SDHCI_QUIRK_FORCE_HIGHSPEED; + SDHCI_QUIRK_BROKEN_SMALL_PIO; } /* diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 6b2d1f99af6..accb592764e 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1291,8 +1291,11 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) if (host->cmd->data) DBG("Cannot wait for busy signal when also " "doing a data transfer"); - else + else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)) return; + + /* The controller does not support the end-of-busy IRQ, + * fall through and take the SDHCI_INT_RESPONSE */ } if (intmask & SDHCI_INT_RESPONSE) @@ -1636,8 +1639,7 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_max = host->max_clk; mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; - if ((caps & SDHCI_CAN_DO_HISPD) || - (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED)) + if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED; mmc->ocr_avail = 0; @@ -1723,7 +1725,9 @@ int sdhci_add_host(struct sdhci_host *host) #endif #ifdef SDHCI_USE_LEDS_CLASS - host->led.name = mmc_hostname(mmc); + snprintf(host->led_name, sizeof(host->led_name), + "%s::", mmc_hostname(mmc)); + host->led.name = host->led_name; host->led.brightness = LED_OFF; host->led.default_trigger = mmc_hostname(mmc); host->led.brightness_set = sdhci_led_control; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 3efba236394..43c37c68d07 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -208,8 +208,8 @@ struct sdhci_host { #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) /* Controller has an issue with buffer bits for small transfers */ #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) -/* Controller supports high speed but doesn't have the caps bit set */ -#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14) +/* Controller does not provide transfer-complete interrupt when not busy */ +#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ @@ -222,6 +222,7 @@ struct sdhci_host { #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) struct led_classdev led; /* LED control */ + char led_name[32]; #endif spinlock_t lock; /* Mutex */ |