diff options
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/bfin_sdh.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/jz4740_mmc.c | 5 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.c | 109 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.h | 5 | ||||
| -rw-r--r-- | drivers/mmc/host/msm_sdcc.c | 52 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-s3c.c | 36 | ||||
| -rw-r--r-- | drivers/mmc/host/ushc.c | 1 |
7 files changed, 89 insertions, 121 deletions
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index bac7d62866b..0371bf50224 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -462,7 +462,7 @@ static int __devinit sdh_probe(struct platform_device *pdev) goto out; } - mmc = mmc_alloc_host(sizeof(*mmc), &pdev->dev); + mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; goto out; diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index b3a0ab0e4c2..74218ad677e 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -14,6 +14,7 @@ */ #include <linux/mmc/host.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -827,8 +828,8 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev) } host->clk = clk_get(&pdev->dev, "mmc"); - if (!host->clk) { - ret = -ENOENT; + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); dev_err(&pdev->dev, "Failed to get mmc clock\n"); goto err_free_host; } diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 56302282566..2d6de3e03e2 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -14,6 +14,7 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/interrupt.h> +#include <linux/kernel.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/highmem.h> @@ -46,10 +47,6 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) - * @broken_blockend: the MCI_DATABLOCKEND is broken on the hardware - * and will not work at all. - * @broken_blockend_dma: the MCI_DATABLOCKEND is broken on the hardware when - * using DMA. * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm */ @@ -59,8 +56,6 @@ struct variant_data { unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; - bool broken_blockend; - bool broken_blockend_dma; bool sdio; bool st_clkdiv; }; @@ -76,7 +71,6 @@ static struct variant_data variant_u300 = { .fifohalfsize = 8 * 4, .clkreg_enable = 1 << 13, /* HWFCEN */ .datalength_bits = 16, - .broken_blockend_dma = true, .sdio = true, }; @@ -86,7 +80,6 @@ static struct variant_data variant_ux500 = { .clkreg = MCI_CLK_ENABLE, .clkreg_enable = 1 << 14, /* HWFCEN */ .datalength_bits = 24, - .broken_blockend = true, .sdio = true, .st_clkdiv = true, }; @@ -210,8 +203,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) host->data = data; host->size = data->blksz * data->blocks; host->data_xfered = 0; - host->blockend = false; - host->dataend = false; mmci_init_sg(host, data); @@ -288,21 +279,26 @@ static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { - struct variant_data *variant = host->variant; - /* First check for errors */ if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + u32 remain, success; + + /* Calculate how far we are into the transfer */ + remain = readl(host->base + MMCIDATACNT); + success = data->blksz * data->blocks - remain; + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); - if (status & MCI_DATACRCFAIL) + if (status & MCI_DATACRCFAIL) { + /* Last block was not successful */ + host->data_xfered = round_down(success - 1, data->blksz); data->error = -EILSEQ; - else if (status & MCI_DATATIMEOUT) + } else if (status & MCI_DATATIMEOUT) { + host->data_xfered = round_down(success, data->blksz); data->error = -ETIMEDOUT; - else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) + } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + host->data_xfered = round_down(success, data->blksz); data->error = -EIO; - - /* Force-complete the transaction */ - host->blockend = true; - host->dataend = true; + } /* * We hit an error condition. Ensure that any data @@ -321,61 +317,14 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, } } - /* - * On ARM variants in PIO mode, MCI_DATABLOCKEND - * is always sent first, and we increase the - * transfered number of bytes for that IRQ. Then - * MCI_DATAEND follows and we conclude the transaction. - * - * On the Ux500 single-IRQ variant MCI_DATABLOCKEND - * doesn't seem to immediately clear from the status, - * so we can't use it keep count when only one irq is - * used because the irq will hit for other reasons, and - * then the flag is still up. So we use the MCI_DATAEND - * IRQ at the end of the entire transfer because - * MCI_DATABLOCKEND is broken. - * - * In the U300, the IRQs can arrive out-of-order, - * e.g. MCI_DATABLOCKEND sometimes arrives after MCI_DATAEND, - * so for this case we use the flags "blockend" and - * "dataend" to make sure both IRQs have arrived before - * concluding the transaction. (This does not apply - * to the Ux500 which doesn't fire MCI_DATABLOCKEND - * at all.) In DMA mode it suffers from the same problem - * as the Ux500. - */ - if (status & MCI_DATABLOCKEND) { - /* - * Just being a little over-cautious, we do not - * use this progressive update if the hardware blockend - * flag is unreliable: since it can stay high between - * IRQs it will corrupt the transfer counter. - */ - if (!variant->broken_blockend) - host->data_xfered += data->blksz; - host->blockend = true; - } - - if (status & MCI_DATAEND) - host->dataend = true; + if (status & MCI_DATABLOCKEND) + dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); - /* - * On variants with broken blockend we shall only wait for dataend, - * on others we must sync with the blockend signal since they can - * appear out-of-order. - */ - if (host->dataend && (host->blockend || variant->broken_blockend)) { + if (status & MCI_DATAEND || data->error) { mmci_stop_data(host); - /* Reset these flags */ - host->blockend = false; - host->dataend = false; - - /* - * Variants with broken blockend flags need to handle the - * end of the entire transfer here. - */ - if (variant->broken_blockend && !data->error) + if (!data->error) + /* The error clause is handled above, success! */ host->data_xfered += data->blksz * data->blocks; if (!data->stop) { @@ -394,15 +343,15 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, host->cmd = NULL; - cmd->resp[0] = readl(base + MMCIRESPONSE0); - cmd->resp[1] = readl(base + MMCIRESPONSE1); - cmd->resp[2] = readl(base + MMCIRESPONSE2); - cmd->resp[3] = readl(base + MMCIRESPONSE3); - if (status & MCI_CMDTIMEOUT) { cmd->error = -ETIMEDOUT; } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { cmd->error = -EILSEQ; + } else { + cmd->resp[0] = readl(base + MMCIRESPONSE0); + cmd->resp[1] = readl(base + MMCIRESPONSE1); + cmd->resp[2] = readl(base + MMCIRESPONSE2); + cmd->resp[3] = readl(base + MMCIRESPONSE3); } if (!cmd->data || cmd->error) { @@ -770,7 +719,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; - unsigned int mask; int ret; /* must have platform data */ @@ -951,12 +899,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) goto irq0_free; } - mask = MCI_IRQENABLE; - /* Don't use the datablockend flag if it's broken */ - if (variant->broken_blockend) - mask &= ~MCI_DATABLOCKEND; - - writel(mask, host->base + MMCIMASK0); + writel(MCI_IRQENABLE, host->base + MMCIMASK0); amba_set_drvdata(dev, mmc); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index df06f01aac8..c1df7b82d36 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -137,7 +137,7 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ #define MCI_IRQ1MASK \ @@ -177,9 +177,6 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; - bool blockend; - bool dataend; - /* pio stuff */ struct sg_mapping_iter sg_miter; unsigned int size; diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c index 5decfd0bd61..153ab977a01 100644 --- a/drivers/mmc/host/msm_sdcc.c +++ b/drivers/mmc/host/msm_sdcc.c @@ -383,14 +383,30 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) host->curr.user_pages = 0; box = &nc->cmd[0]; - for (i = 0; i < host->dma.num_ents; i++) { - box->cmd = CMD_MODE_BOX; - /* Initialize sg dma address */ - sg->dma_address = page_to_dma(mmc_dev(host->mmc), sg_page(sg)) - + sg->offset; + /* location of command block must be 64 bit aligned */ + BUG_ON(host->dma.cmd_busaddr & 0x07); - if (i == (host->dma.num_ents - 1)) + nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; + host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | + DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); + host->dma.hdr.complete_func = msmsdcc_dma_complete_func; + + n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, + host->dma.num_ents, host->dma.dir); + if (n == 0) { + printk(KERN_ERR "%s: Unable to map in all sg elements\n", + mmc_hostname(host->mmc)); + host->dma.sg = NULL; + host->dma.num_ents = 0; + return -ENOMEM; + } + + for_each_sg(host->dma.sg, sg, n, i) { + + box->cmd = CMD_MODE_BOX; + + if (i == n - 1) box->cmd |= CMD_LC; rows = (sg_dma_len(sg) % MCI_FIFOSIZE) ? (sg_dma_len(sg) / MCI_FIFOSIZE) + 1 : @@ -418,27 +434,6 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) box->cmd |= CMD_DST_CRCI(crci); } box++; - sg++; - } - - /* location of command block must be 64 bit aligned */ - BUG_ON(host->dma.cmd_busaddr & 0x07); - - nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; - host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | - DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); - host->dma.hdr.complete_func = msmsdcc_dma_complete_func; - - n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, - host->dma.num_ents, host->dma.dir); -/* dsb inside dma_map_sg will write nc out to mem as well */ - - if (n != host->dma.num_ents) { - printk(KERN_ERR "%s: Unable to map in all sg elements\n", - mmc_hostname(host->mmc)); - host->dma.sg = NULL; - host->dma.num_ents = 0; - return -ENOMEM; } return 0; @@ -1331,9 +1326,6 @@ msmsdcc_probe(struct platform_device *pdev) if (host->timer.function) pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc)); -#if BUSCLK_PWRSAVE - msmsdcc_disable_clocks(host, 1); -#endif return 0; cmd_irq_free: free_irq(cmd_irqres->start, host); diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 17203586305..5309ab95aad 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -277,10 +277,43 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) host->clock = clock; } +/** + * sdhci_s3c_platform_8bit_width - support 8bit buswidth + * @host: The SDHCI host being queried + * @width: MMC_BUS_WIDTH_ macro for the bus width being requested + * + * We have 8-bit width support but is not a v3 controller. + * So we add platform_8bit_width() and support 8bit width. + */ +static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + + switch (width) { + case MMC_BUS_WIDTH_8: + ctrl |= SDHCI_CTRL_8BITBUS; + ctrl &= ~SDHCI_CTRL_4BITBUS; + break; + case MMC_BUS_WIDTH_4: + ctrl |= SDHCI_CTRL_4BITBUS; + ctrl &= ~SDHCI_CTRL_8BITBUS; + break; + default: + break; + } + + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + + return 0; +} + static struct sdhci_ops sdhci_s3c_ops = { .get_max_clock = sdhci_s3c_get_max_clk, .set_clock = sdhci_s3c_set_clock, .get_min_clock = sdhci_s3c_get_min_clock, + .platform_8bit_width = sdhci_s3c_platform_8bit_width, }; static void sdhci_s3c_notify_change(struct platform_device *dev, int state) @@ -473,6 +506,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT) host->mmc->caps = MMC_CAP_NONREMOVABLE; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE); diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c index f8f65df9b01..f08f944ac53 100644 --- a/drivers/mmc/host/ushc.c +++ b/drivers/mmc/host/ushc.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/kernel.h> -#include <linux/usb.h> #include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/mmc/host.h> |