summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/mmc_block.c16
-rw-r--r--drivers/mmc/sdhci.c24
-rw-r--r--drivers/mmc/sdhci.h4
-rw-r--r--drivers/mmc/wbsd.c131
-rw-r--r--drivers/mmc/wbsd.h4
5 files changed, 50 insertions, 129 deletions
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 86439a0bb27..95b0da6abe8 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -223,7 +223,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
struct mmc_blk_request brq;
- int ret = 1;
+ int ret = 1, sg_pos, data_size;
if (mmc_card_claim_host(card))
goto flush_queue;
@@ -283,6 +283,20 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.data.sg = mq->sg;
brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg);
+ if (brq.data.blocks !=
+ (req->nr_sectors >> (md->block_bits - 9))) {
+ data_size = brq.data.blocks * brq.data.blksz;
+ for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) {
+ data_size -= mq->sg[sg_pos].length;
+ if (data_size <= 0) {
+ mq->sg[sg_pos].length += data_size;
+ sg_pos++;
+ break;
+ }
+ }
+ brq.data.sg_len = sg_pos;
+ }
+
mmc_wait_for_req(card->host, &brq.mrq);
if (brq.cmd.error) {
printk(KERN_ERR "%s: error %d sending read/write command\n",
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index d749f08601b..587dccf95f8 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -1,7 +1,7 @@
/*
* linux/drivers/mmc/sdhci.c - Secure Digital Host Controller Interface driver
*
- * Copyright (C) 2005-2006 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -247,14 +247,13 @@ static void sdhci_read_block_pio(struct sdhci_host *host)
chunk_remain = min(blksize, 4);
}
- size = min(host->size, host->remain);
- size = min(size, chunk_remain);
+ size = min(host->remain, chunk_remain);
chunk_remain -= size;
blksize -= size;
host->offset += size;
host->remain -= size;
- host->size -= size;
+
while (size) {
*buffer = data & 0xFF;
buffer++;
@@ -289,14 +288,13 @@ static void sdhci_write_block_pio(struct sdhci_host *host)
buffer = sdhci_sg_to_buffer(host) + host->offset;
while (blksize) {
- size = min(host->size, host->remain);
- size = min(size, chunk_remain);
+ size = min(host->remain, chunk_remain);
chunk_remain -= size;
blksize -= size;
host->offset += size;
host->remain -= size;
- host->size -= size;
+
while (size) {
data >>= 8;
data |= (u32)*buffer << 24;
@@ -325,7 +323,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
BUG_ON(!host->data);
- if (host->size == 0)
+ if (host->num_sg == 0)
return;
if (host->data->flags & MMC_DATA_READ)
@@ -339,10 +337,8 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
else
sdhci_write_block_pio(host);
- if (host->size == 0)
+ if (host->num_sg == 0)
break;
-
- BUG_ON(host->num_sg == 0);
}
DBG("PIO transfer complete.\n");
@@ -408,8 +404,6 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS);
} else {
- host->size = data->blksz * data->blocks;
-
host->cur_sg = data->sg;
host->num_sg = data->sg_len;
@@ -473,10 +467,6 @@ static void sdhci_finish_data(struct sdhci_host *host)
"though there were blocks left.\n",
mmc_hostname(host->mmc));
data->error = MMC_ERR_FAILED;
- } else if (host->size != 0) {
- printk(KERN_ERR "%s: %d bytes were left untransferred.\n",
- mmc_hostname(host->mmc), host->size);
- data->error = MMC_ERR_FAILED;
}
DBG("Ending data transfer (%d bytes)\n", data->bytes_xfered);
diff --git a/drivers/mmc/sdhci.h b/drivers/mmc/sdhci.h
index e324f0a623d..7400f4bc114 100644
--- a/drivers/mmc/sdhci.h
+++ b/drivers/mmc/sdhci.h
@@ -1,7 +1,7 @@
/*
* linux/drivers/mmc/sdhci.h - Secure Digital Host Controller Interface driver
*
- * Copyright (C) 2005 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -187,8 +187,6 @@ struct sdhci_host {
int offset; /* Offset into current sg */
int remain; /* Bytes left in current */
- int size; /* Remaining bytes in transfer */
-
char slot_descr[20]; /* Name for reservations */
int irq; /* Device IRQ */
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 05ccfc43168..7a3e32ec46b 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -1,7 +1,7 @@
/*
* linux/drivers/mmc/wbsd.c - Winbond W83L51xD SD/MMC driver
*
- * Copyright (C) 2004-2006 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2004-2007 Pierre Ossman, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -278,90 +278,36 @@ static inline char *wbsd_sg_to_buffer(struct wbsd_host *host)
static inline void wbsd_sg_to_dma(struct wbsd_host *host, struct mmc_data *data)
{
- unsigned int len, i, size;
+ unsigned int len, i;
struct scatterlist *sg;
char *dmabuf = host->dma_buffer;
char *sgbuf;
- size = host->size;
-
sg = data->sg;
len = data->sg_len;
- /*
- * Just loop through all entries. Size might not
- * be the entire list though so make sure that
- * we do not transfer too much.
- */
for (i = 0; i < len; i++) {
sgbuf = page_address(sg[i].page) + sg[i].offset;
- if (size < sg[i].length)
- memcpy(dmabuf, sgbuf, size);
- else
- memcpy(dmabuf, sgbuf, sg[i].length);
+ memcpy(dmabuf, sgbuf, sg[i].length);
dmabuf += sg[i].length;
-
- if (size < sg[i].length)
- size = 0;
- else
- size -= sg[i].length;
-
- if (size == 0)
- break;
}
-
- /*
- * Check that we didn't get a request to transfer
- * more data than can fit into the SG list.
- */
-
- BUG_ON(size != 0);
-
- host->size -= size;
}
static inline void wbsd_dma_to_sg(struct wbsd_host *host, struct mmc_data *data)
{
- unsigned int len, i, size;
+ unsigned int len, i;
struct scatterlist *sg;
char *dmabuf = host->dma_buffer;
char *sgbuf;
- size = host->size;
-
sg = data->sg;
len = data->sg_len;
- /*
- * Just loop through all entries. Size might not
- * be the entire list though so make sure that
- * we do not transfer too much.
- */
for (i = 0; i < len; i++) {
sgbuf = page_address(sg[i].page) + sg[i].offset;
- if (size < sg[i].length)
- memcpy(sgbuf, dmabuf, size);
- else
- memcpy(sgbuf, dmabuf, sg[i].length);
+ memcpy(sgbuf, dmabuf, sg[i].length);
dmabuf += sg[i].length;
-
- if (size < sg[i].length)
- size = 0;
- else
- size -= sg[i].length;
-
- if (size == 0)
- break;
}
-
- /*
- * Check that we didn't get a request to transfer
- * more data than can fit into the SG list.
- */
-
- BUG_ON(size != 0);
-
- host->size -= size;
}
/*
@@ -484,7 +430,7 @@ static void wbsd_empty_fifo(struct wbsd_host *host)
/*
* Handle excessive data.
*/
- if (data->bytes_xfered == host->size)
+ if (host->num_sg == 0)
return;
buffer = wbsd_sg_to_buffer(host) + host->offset;
@@ -514,31 +460,14 @@ static void wbsd_empty_fifo(struct wbsd_host *host)
data->bytes_xfered++;
/*
- * Transfer done?
- */
- if (data->bytes_xfered == host->size)
- return;
-
- /*
* End of scatter list entry?
*/
if (host->remain == 0) {
/*
* Get next entry. Check if last.
*/
- if (!wbsd_next_sg(host)) {
- /*
- * We should never reach this point.
- * It means that we're trying to
- * transfer more blocks than can fit
- * into the scatter list.
- */
- BUG_ON(1);
-
- host->size = data->bytes_xfered;
-
+ if (!wbsd_next_sg(host))
return;
- }
buffer = wbsd_sg_to_buffer(host);
}
@@ -550,7 +479,7 @@ static void wbsd_empty_fifo(struct wbsd_host *host)
* hardware problem. The chip doesn't trigger
* FIFO threshold interrupts properly.
*/
- if ((host->size - data->bytes_xfered) < 16)
+ if ((data->blocks * data->blksz - data->bytes_xfered) < 16)
tasklet_schedule(&host->fifo_tasklet);
}
@@ -564,7 +493,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
* Check that we aren't being called after the
* entire buffer has been transfered.
*/
- if (data->bytes_xfered == host->size)
+ if (host->num_sg == 0)
return;
buffer = wbsd_sg_to_buffer(host) + host->offset;
@@ -594,31 +523,14 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
data->bytes_xfered++;
/*
- * Transfer done?
- */
- if (data->bytes_xfered == host->size)
- return;
-
- /*
* End of scatter list entry?
*/
if (host->remain == 0) {
/*
* Get next entry. Check if last.
*/
- if (!wbsd_next_sg(host)) {
- /*
- * We should never reach this point.
- * It means that we're trying to
- * transfer more blocks than can fit
- * into the scatter list.
- */
- BUG_ON(1);
-
- host->size = data->bytes_xfered;
-
+ if (!wbsd_next_sg(host))
return;
- }
buffer = wbsd_sg_to_buffer(host);
}
@@ -638,6 +550,7 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
u16 blksize;
u8 setup;
unsigned long dmaflags;
+ unsigned int size;
DBGF("blksz %04x blks %04x flags %08x\n",
data->blksz, data->blocks, data->flags);
@@ -647,7 +560,7 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
/*
* Calculate size.
*/
- host->size = data->blocks * data->blksz;
+ size = data->blocks * data->blksz;
/*
* Check timeout values for overflow.
@@ -705,8 +618,8 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
/*
* The buffer for DMA is only 64 kB.
*/
- BUG_ON(host->size > 0x10000);
- if (host->size > 0x10000) {
+ BUG_ON(size > 0x10000);
+ if (size > 0x10000) {
data->error = MMC_ERR_INVALID;
return;
}
@@ -729,7 +642,7 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
else
set_dma_mode(host->dma, DMA_MODE_WRITE & ~0x40);
set_dma_addr(host->dma, host->dma_addr);
- set_dma_count(host->dma, host->size);
+ set_dma_count(host->dma, size);
enable_dma(host->dma);
release_dma_lock(dmaflags);
@@ -812,6 +725,10 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
count = get_dma_residue(host->dma);
release_dma_lock(dmaflags);
+ data->bytes_xfered = host->mrq->data->blocks *
+ host->mrq->data->blksz - count;
+ data->bytes_xfered -= data->bytes_xfered % data->blksz;
+
/*
* Any leftover data?
*/
@@ -820,7 +737,8 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
"%d bytes left.\n",
mmc_hostname(host->mmc), count);
- data->error = MMC_ERR_FAILED;
+ if (data->error == MMC_ERR_NONE)
+ data->error = MMC_ERR_FAILED;
} else {
/*
* Transfer data from DMA buffer to
@@ -828,8 +746,11 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
*/
if (data->flags & MMC_DATA_READ)
wbsd_dma_to_sg(host, data);
+ }
- data->bytes_xfered = host->size;
+ if (data->error != MMC_ERR_NONE) {
+ if (data->bytes_xfered)
+ data->bytes_xfered -= data->blksz;
}
}
@@ -1167,7 +1088,7 @@ static void wbsd_tasklet_fifo(unsigned long param)
/*
* Done?
*/
- if (host->size == data->bytes_xfered) {
+ if (host->num_sg == 0) {
wbsd_write_index(host, WBSD_IDX_FIFOEN, 0);
tasklet_schedule(&host->finish_tasklet);
}
diff --git a/drivers/mmc/wbsd.h b/drivers/mmc/wbsd.h
index d06718b0e2a..6fb4fa42321 100644
--- a/drivers/mmc/wbsd.h
+++ b/drivers/mmc/wbsd.h
@@ -1,7 +1,7 @@
/*
* linux/drivers/mmc/wbsd.h - Winbond W83L51xD SD/MMC driver
*
- * Copyright (C) 2004-2005 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2004-2007 Pierre Ossman, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -158,8 +158,6 @@ struct wbsd_host
unsigned int offset; /* Offset into current entry */
unsigned int remain; /* Data left in curren entry */
- int size; /* Total size of transfer */
-
char* dma_buffer; /* ISA DMA buffer */
dma_addr_t dma_addr; /* Physical address for same */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 04:54:11 +0000