summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/mmc.c83
-rw-r--r--drivers/mmc/sdhci.c25
2 files changed, 58 insertions, 50 deletions
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 5046a166134..4a73e8b2428 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -376,10 +376,11 @@ static inline void mmc_set_ios(struct mmc_host *host)
{
struct mmc_ios *ios = &host->ios;
- pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
+ pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
+ "width %u timing %u\n",
mmc_hostname(host), ios->clock, ios->bus_mode,
ios->power_mode, ios->chip_select, ios->vdd,
- ios->bus_width);
+ ios->bus_width, ios->timing);
host->ops->set_ios(host, ios);
}
@@ -809,6 +810,7 @@ static void mmc_power_up(struct mmc_host *host)
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_UP;
host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
mmc_delay(1);
@@ -828,6 +830,7 @@ static void mmc_power_off(struct mmc_host *host)
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_OFF;
host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
}
@@ -1112,46 +1115,50 @@ static void mmc_process_ext_csds(struct mmc_host *host)
continue;
}
- /* Activate highspeed support. */
- cmd.opcode = MMC_SWITCH;
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_HS_TIMING << 16) |
- (1 << 8) |
- EXT_CSD_CMD_SET_NORMAL;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ if (host->caps & MMC_CAP_MMC_HIGHSPEED) {
+ /* Activate highspeed support. */
+ cmd.opcode = MMC_SWITCH;
+ cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_HS_TIMING << 16) |
+ (1 << 8) |
+ EXT_CSD_CMD_SET_NORMAL;
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE) {
- printk("%s: failed to switch card to mmc v4 "
- "high-speed mode.\n",
- mmc_hostname(card->host));
- continue;
- }
+ err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ if (err != MMC_ERR_NONE) {
+ printk("%s: failed to switch card to mmc v4 "
+ "high-speed mode.\n",
+ mmc_hostname(card->host));
+ continue;
+ }
- mmc_card_set_highspeed(card);
+ mmc_card_set_highspeed(card);
- /* Check for host support for wide-bus modes. */
- if (!(host->caps & MMC_CAP_4_BIT_DATA)) {
- continue;
+ host->ios.timing = MMC_TIMING_SD_HS;
+ mmc_set_ios(host);
}
- /* Activate 4-bit support. */
- cmd.opcode = MMC_SWITCH;
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_BUS_WIDTH << 16) |
- (EXT_CSD_BUS_WIDTH_4 << 8) |
- EXT_CSD_CMD_SET_NORMAL;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ /* Check for host support for wide-bus modes. */
+ if (host->caps & MMC_CAP_4_BIT_DATA) {
+ /* Activate 4-bit support. */
+ cmd.opcode = MMC_SWITCH;
+ cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_BUS_WIDTH << 16) |
+ (EXT_CSD_BUS_WIDTH_4 << 8) |
+ EXT_CSD_CMD_SET_NORMAL;
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE) {
- printk("%s: failed to switch card to "
- "mmc v4 4-bit bus mode.\n",
- mmc_hostname(card->host));
- continue;
- }
+ err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ if (err != MMC_ERR_NONE) {
+ printk("%s: failed to switch card to "
+ "mmc v4 4-bit bus mode.\n",
+ mmc_hostname(card->host));
+ continue;
+ }
- host->ios.bus_width = MMC_BUS_WIDTH_4;
+ host->ios.bus_width = MMC_BUS_WIDTH_4;
+ mmc_set_ios(host);
+ }
}
kfree(ext_csd);
@@ -1241,6 +1248,9 @@ static void mmc_read_switch_caps(struct mmc_host *host)
unsigned char *status;
struct scatterlist sg;
+ if (!(host->caps & MMC_CAP_SD_HIGHSPEED))
+ return;
+
status = kmalloc(64, GFP_KERNEL);
if (!status) {
printk(KERN_WARNING "%s: Unable to allocate buffer for "
@@ -1332,6 +1342,9 @@ static void mmc_read_switch_caps(struct mmc_host *host)
}
mmc_card_set_highspeed(card);
+
+ host->ios.timing = MMC_TIMING_SD_HS;
+ mmc_set_ios(host);
}
kfree(status);
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 7522f76b15e..c52b167e858 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -606,7 +606,6 @@ static void sdhci_finish_command(struct sdhci_host *host)
static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
int div;
- u8 ctrl;
u16 clk;
unsigned long timeout;
@@ -615,13 +614,6 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
- ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
- if (clock > 25000000)
- ctrl |= SDHCI_CTRL_HISPD;
- else
- ctrl &= ~SDHCI_CTRL_HISPD;
- writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
-
if (clock == 0)
goto out;
@@ -761,10 +753,17 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
sdhci_set_power(host, ios->vdd);
ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+
if (ios->bus_width == MMC_BUS_WIDTH_4)
ctrl |= SDHCI_CTRL_4BITBUS;
else
ctrl &= ~SDHCI_CTRL_4BITBUS;
+
+ if (ios->timing == MMC_TIMING_SD_HS)
+ ctrl |= SDHCI_CTRL_HISPD;
+ else
+ ctrl &= ~SDHCI_CTRL_HISPD;
+
writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
mmiowb();
@@ -1274,6 +1273,9 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK;
+ if (caps & SDHCI_CAN_DO_HISPD)
+ mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+
mmc->ocr_avail = 0;
if (caps & SDHCI_CAN_VDD_330)
mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
@@ -1282,13 +1284,6 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
if (caps & SDHCI_CAN_VDD_180)
mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19;
- if ((host->max_clk > 25000000) && !(caps & SDHCI_CAN_DO_HISPD)) {
- printk(KERN_ERR "%s: Controller reports > 25 MHz base clock,"
- " but no high speed support.\n",
- host->slot_descr);
- mmc->f_max = 25000000;
- }
-
if (mmc->ocr_avail == 0) {
printk(KERN_ERR "%s: Hardware doesn't report any "
"support voltages.\n", host->slot_descr);