diff options
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/card/sdio_uart.c | 24 | ||||
-rw-r--r-- | drivers/mmc/core/sdio.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/at91_mci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/atmel-mci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/vub300.c | 2 |
7 files changed, 18 insertions, 18 deletions
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 5a2cbfac66d..d2339ea3781 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -518,7 +518,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) if (status & UART_MSR_DCTS) { port->icount.cts++; tty = tty_port_tty_get(&port->port); - if (tty && (tty->termios->c_cflag & CRTSCTS)) { + if (tty && (tty->termios.c_cflag & CRTSCTS)) { int cts = (status & UART_MSR_CTS); if (tty->hw_stopped) { if (cts) { @@ -671,12 +671,12 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE; port->mctrl = TIOCM_OUT2; - sdio_uart_change_speed(port, tty->termios, NULL); + sdio_uart_change_speed(port, &tty->termios, NULL); - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) tty->hw_stopped = 1; @@ -850,7 +850,7 @@ static void sdio_uart_throttle(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; - if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS)) + if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS)) return; if (sdio_uart_claim_func(port) != 0) @@ -861,7 +861,7 @@ static void sdio_uart_throttle(struct tty_struct *tty) sdio_uart_start_tx(port); } - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) sdio_uart_clear_mctrl(port, TIOCM_RTS); sdio_uart_irq(port->func); @@ -872,7 +872,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; - if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS)) + if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS)) return; if (sdio_uart_claim_func(port) != 0) @@ -887,7 +887,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty) } } - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) sdio_uart_set_mctrl(port, TIOCM_RTS); sdio_uart_irq(port->func); @@ -898,12 +898,12 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct sdio_uart_port *port = tty->driver_data; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; if (sdio_uart_claim_func(port) != 0) return; - sdio_uart_change_speed(port, tty->termios, old_termios); + sdio_uart_change_speed(port, &tty->termios, old_termios); /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) @@ -1132,8 +1132,8 @@ static int sdio_uart_probe(struct sdio_func *func, kfree(port); } else { struct device *dev; - dev = tty_register_device(sdio_uart_tty_driver, - port->index, &func->dev); + dev = tty_port_register_device(&port->port, + sdio_uart_tty_driver, port->index, &func->dev); if (IS_ERR(dev)) { sdio_uart_port_remove(port); ret = PTR_ERR(dev); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index d4619e2ec03..2273ce6b6c1 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -641,7 +641,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, /* * If the host and card support UHS-I mode request the card * to switch to 1.8V signaling level. No 1.8v signalling if - * UHS mode is not enabled to maintain compatibilty and some + * UHS mode is not enabled to maintain compatibility and some * systems that claim 1.8v signalling in fact do not support * it. */ diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index efdb81d21c4..74bed0fc23e 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -356,7 +356,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host) } /* - * Update bytes tranfered count during a write operation + * Update bytes transfered count during a write operation */ static void at91_mci_update_bytes_xfered(struct at91mci_host *host) { diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index a53c7c478e0..852d5fbda63 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1022,7 +1022,7 @@ static void atmci_stop_transfer(struct atmel_mci *host) } /* - * Stop data transfer because error(s) occured. + * Stop data transfer because error(s) occurred. */ static void atmci_stop_transfer_pdc(struct atmel_mci *host) { diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index e975d3ecccc..8e2d81f1ee4 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -447,7 +447,7 @@ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host) OMAP_HSMMC_WRITE(host->base, SYSCTL, OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) - dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); + dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stopped\n"); } static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host, diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index e23f8134591..32f4a070551 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -315,7 +315,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) new_val = val & (SDHCI_CTRL_LED | \ SDHCI_CTRL_4BITBUS | \ SDHCI_CTRL_D3CD); - /* ensure the endianess */ + /* ensure the endianness */ new_val |= ESDHC_HOST_CONTROL_LE; /* bits 8&9 are reserved on mx25 */ if (!is_imx25_esdhc(imx_data)) { diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index 3135a1a5d75..58eab9ac1d0 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -806,7 +806,7 @@ static void command_res_completed(struct urb *urb) * we suspect a buggy USB host controller */ } else if (!vub300->data) { - /* this means that the command (typically CMD52) suceeded */ + /* this means that the command (typically CMD52) succeeded */ } else if (vub300->resp.common.header_type != 0x02) { /* * this is an error response from the VUB300 chip |