summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/core/sdio.c3
-rw-r--r--drivers/mmc/host/bfin_sdh.c2
-rw-r--r--drivers/mmc/host/jz4740_mmc.c5
-rw-r--r--drivers/mmc/host/mmci.c109
-rw-r--r--drivers/mmc/host/mmci.h5
-rw-r--r--drivers/mmc/host/sdhci-s3c.c36
-rw-r--r--drivers/mmc/host/ushc.c1
7 files changed, 68 insertions, 93 deletions
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 5c4a54d9b6a..ebc62ad4cc5 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -792,7 +792,6 @@ int mmc_attach_sdio(struct mmc_host *host)
*/
mmc_release_host(host);
err = mmc_add_card(host->card);
- mmc_claim_host(host);
if (err)
goto remove_added;
@@ -805,12 +804,12 @@ int mmc_attach_sdio(struct mmc_host *host)
goto remove_added;
}
+ mmc_claim_host(host);
return 0;
remove_added:
/* Remove without lock if the device has been added. */
- mmc_release_host(host);
mmc_sdio_remove(host);
mmc_claim_host(host);
remove:
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index bac7d62866b..0371bf50224 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -462,7 +462,7 @@ static int __devinit sdh_probe(struct platform_device *pdev)
goto out;
}
- mmc = mmc_alloc_host(sizeof(*mmc), &pdev->dev);
+ mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
goto out;
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index b3a0ab0e4c2..74218ad677e 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -14,6 +14,7 @@
*/
#include <linux/mmc/host.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
@@ -827,8 +828,8 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev)
}
host->clk = clk_get(&pdev->dev, "mmc");
- if (!host->clk) {
- ret = -ENOENT;
+ if (IS_ERR(host->clk)) {
+ ret = PTR_ERR(host->clk);
dev_err(&pdev->dev, "Failed to get mmc clock\n");
goto err_free_host;
}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 56302282566..2d6de3e03e2 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -14,6 +14,7 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/highmem.h>
@@ -46,10 +47,6 @@ static unsigned int fmax = 515633;
* is asserted (likewise for RX)
* @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
* is asserted (likewise for RX)
- * @broken_blockend: the MCI_DATABLOCKEND is broken on the hardware
- * and will not work at all.
- * @broken_blockend_dma: the MCI_DATABLOCKEND is broken on the hardware when
- * using DMA.
* @sdio: variant supports SDIO
* @st_clkdiv: true if using a ST-specific clock divider algorithm
*/
@@ -59,8 +56,6 @@ struct variant_data {
unsigned int datalength_bits;
unsigned int fifosize;
unsigned int fifohalfsize;
- bool broken_blockend;
- bool broken_blockend_dma;
bool sdio;
bool st_clkdiv;
};
@@ -76,7 +71,6 @@ static struct variant_data variant_u300 = {
.fifohalfsize = 8 * 4,
.clkreg_enable = 1 << 13, /* HWFCEN */
.datalength_bits = 16,
- .broken_blockend_dma = true,
.sdio = true,
};
@@ -86,7 +80,6 @@ static struct variant_data variant_ux500 = {
.clkreg = MCI_CLK_ENABLE,
.clkreg_enable = 1 << 14, /* HWFCEN */
.datalength_bits = 24,
- .broken_blockend = true,
.sdio = true,
.st_clkdiv = true,
};
@@ -210,8 +203,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
host->data = data;
host->size = data->blksz * data->blocks;
host->data_xfered = 0;
- host->blockend = false;
- host->dataend = false;
mmci_init_sg(host, data);
@@ -288,21 +279,26 @@ static void
mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
unsigned int status)
{
- struct variant_data *variant = host->variant;
-
/* First check for errors */
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ u32 remain, success;
+
+ /* Calculate how far we are into the transfer */
+ remain = readl(host->base + MMCIDATACNT);
+ success = data->blksz * data->blocks - remain;
+
dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
- if (status & MCI_DATACRCFAIL)
+ if (status & MCI_DATACRCFAIL) {
+ /* Last block was not successful */
+ host->data_xfered = round_down(success - 1, data->blksz);
data->error = -EILSEQ;
- else if (status & MCI_DATATIMEOUT)
+ } else if (status & MCI_DATATIMEOUT) {
+ host->data_xfered = round_down(success, data->blksz);
data->error = -ETIMEDOUT;
- else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN))
+ } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ host->data_xfered = round_down(success, data->blksz);
data->error = -EIO;
-
- /* Force-complete the transaction */
- host->blockend = true;
- host->dataend = true;
+ }
/*
* We hit an error condition. Ensure that any data
@@ -321,61 +317,14 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
}
}
- /*
- * On ARM variants in PIO mode, MCI_DATABLOCKEND
- * is always sent first, and we increase the
- * transfered number of bytes for that IRQ. Then
- * MCI_DATAEND follows and we conclude the transaction.
- *
- * On the Ux500 single-IRQ variant MCI_DATABLOCKEND
- * doesn't seem to immediately clear from the status,
- * so we can't use it keep count when only one irq is
- * used because the irq will hit for other reasons, and
- * then the flag is still up. So we use the MCI_DATAEND
- * IRQ at the end of the entire transfer because
- * MCI_DATABLOCKEND is broken.
- *
- * In the U300, the IRQs can arrive out-of-order,
- * e.g. MCI_DATABLOCKEND sometimes arrives after MCI_DATAEND,
- * so for this case we use the flags "blockend" and
- * "dataend" to make sure both IRQs have arrived before
- * concluding the transaction. (This does not apply
- * to the Ux500 which doesn't fire MCI_DATABLOCKEND
- * at all.) In DMA mode it suffers from the same problem
- * as the Ux500.
- */
- if (status & MCI_DATABLOCKEND) {
- /*
- * Just being a little over-cautious, we do not
- * use this progressive update if the hardware blockend
- * flag is unreliable: since it can stay high between
- * IRQs it will corrupt the transfer counter.
- */
- if (!variant->broken_blockend)
- host->data_xfered += data->blksz;
- host->blockend = true;
- }
-
- if (status & MCI_DATAEND)
- host->dataend = true;
+ if (status & MCI_DATABLOCKEND)
+ dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n");
- /*
- * On variants with broken blockend we shall only wait for dataend,
- * on others we must sync with the blockend signal since they can
- * appear out-of-order.
- */
- if (host->dataend && (host->blockend || variant->broken_blockend)) {
+ if (status & MCI_DATAEND || data->error) {
mmci_stop_data(host);
- /* Reset these flags */
- host->blockend = false;
- host->dataend = false;
-
- /*
- * Variants with broken blockend flags need to handle the
- * end of the entire transfer here.
- */
- if (variant->broken_blockend && !data->error)
+ if (!data->error)
+ /* The error clause is handled above, success! */
host->data_xfered += data->blksz * data->blocks;
if (!data->stop) {
@@ -394,15 +343,15 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
host->cmd = NULL;
- cmd->resp[0] = readl(base + MMCIRESPONSE0);
- cmd->resp[1] = readl(base + MMCIRESPONSE1);
- cmd->resp[2] = readl(base + MMCIRESPONSE2);
- cmd->resp[3] = readl(base + MMCIRESPONSE3);
-
if (status & MCI_CMDTIMEOUT) {
cmd->error = -ETIMEDOUT;
} else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {
cmd->error = -EILSEQ;
+ } else {
+ cmd->resp[0] = readl(base + MMCIRESPONSE0);
+ cmd->resp[1] = readl(base + MMCIRESPONSE1);
+ cmd->resp[2] = readl(base + MMCIRESPONSE2);
+ cmd->resp[3] = readl(base + MMCIRESPONSE3);
}
if (!cmd->data || cmd->error) {
@@ -770,7 +719,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
struct variant_data *variant = id->data;
struct mmci_host *host;
struct mmc_host *mmc;
- unsigned int mask;
int ret;
/* must have platform data */
@@ -951,12 +899,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
goto irq0_free;
}
- mask = MCI_IRQENABLE;
- /* Don't use the datablockend flag if it's broken */
- if (variant->broken_blockend)
- mask &= ~MCI_DATABLOCKEND;
-
- writel(mask, host->base + MMCIMASK0);
+ writel(MCI_IRQENABLE, host->base + MMCIMASK0);
amba_set_drvdata(dev, mmc);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index df06f01aac8..c1df7b82d36 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -137,7 +137,7 @@
#define MCI_IRQENABLE \
(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
- MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK)
+ MCI_CMDRESPENDMASK|MCI_CMDSENTMASK)
/* These interrupts are directed to IRQ1 when two IRQ lines are available */
#define MCI_IRQ1MASK \
@@ -177,9 +177,6 @@ struct mmci_host {
struct timer_list timer;
unsigned int oldstat;
- bool blockend;
- bool dataend;
-
/* pio stuff */
struct sg_mapping_iter sg_miter;
unsigned int size;
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 17203586305..5309ab95aad 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -277,10 +277,43 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
host->clock = clock;
}
+/**
+ * sdhci_s3c_platform_8bit_width - support 8bit buswidth
+ * @host: The SDHCI host being queried
+ * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
+ *
+ * We have 8-bit width support but is not a v3 controller.
+ * So we add platform_8bit_width() and support 8bit width.
+ */
+static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
+{
+ u8 ctrl;
+
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+
+ switch (width) {
+ case MMC_BUS_WIDTH_8:
+ ctrl |= SDHCI_CTRL_8BITBUS;
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ break;
+ case MMC_BUS_WIDTH_4:
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+ break;
+ default:
+ break;
+ }
+
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+
+ return 0;
+}
+
static struct sdhci_ops sdhci_s3c_ops = {
.get_max_clock = sdhci_s3c_get_max_clk,
.set_clock = sdhci_s3c_set_clock,
.get_min_clock = sdhci_s3c_get_min_clock,
+ .platform_8bit_width = sdhci_s3c_platform_8bit_width,
};
static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
@@ -473,6 +506,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
host->mmc->caps = MMC_CAP_NONREMOVABLE;
+ if (pdata->host_caps)
+ host->mmc->caps |= pdata->host_caps;
+
host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
SDHCI_QUIRK_32BIT_DMA_SIZE);
diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index f8f65df9b01..f08f944ac53 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/kernel.h>
-#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/mmc/host.h>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 15:55:31 +0000