summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/chips/jedec.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/chips/jedec.c')
-rw-r--r--drivers/mtd/chips/jedec.c206
1 files changed, 103 insertions, 103 deletions
diff --git a/drivers/mtd/chips/jedec.c b/drivers/mtd/chips/jedec.c
index 4f6778f3ee3..c40b48dabed 100644
--- a/drivers/mtd/chips/jedec.c
+++ b/drivers/mtd/chips/jedec.c
@@ -1,6 +1,6 @@
/* JEDEC Flash Interface.
- * This is an older type of interface for self programming flash. It is
+ * This is an older type of interface for self programming flash. It is
* commonly use in older AMD chips and is obsolete compared with CFI.
* It is called JEDEC because the JEDEC association distributes the ID codes
* for the chips.
@@ -88,9 +88,9 @@ static const struct JEDECTable JEDEC_table[] = {
static const struct JEDECTable *jedec_idtoinf(__u8 mfr,__u8 id);
static void jedec_sync(struct mtd_info *mtd) {};
-static int jedec_read(struct mtd_info *mtd, loff_t from, size_t len,
+static int jedec_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf);
-static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len,
+static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf);
static struct mtd_info *jedec_probe(struct map_info *map);
@@ -122,7 +122,7 @@ static struct mtd_info *jedec_probe(struct map_info *map)
memset(MTD, 0, sizeof(struct mtd_info) + sizeof(struct jedec_private));
priv = (struct jedec_private *)&MTD[1];
-
+
my_bank_size = map->size;
if (map->size/my_bank_size > MAX_JEDEC_CHIPS)
@@ -131,13 +131,13 @@ static struct mtd_info *jedec_probe(struct map_info *map)
kfree(MTD);
return NULL;
}
-
+
for (Base = 0; Base < map->size; Base += my_bank_size)
{
// Perhaps zero could designate all tests?
if (map->buswidth == 0)
map->buswidth = 1;
-
+
if (map->buswidth == 1){
if (jedec_probe8(map,Base,priv) == 0) {
printk("did recognize jedec chip\n");
@@ -150,7 +150,7 @@ static struct mtd_info *jedec_probe(struct map_info *map)
if (map->buswidth == 4)
jedec_probe32(map,Base,priv);
}
-
+
// Get the biggest sector size
SectorSize = 0;
for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
@@ -160,7 +160,7 @@ static struct mtd_info *jedec_probe(struct map_info *map)
if (priv->chips[I].sectorsize > SectorSize)
SectorSize = priv->chips[I].sectorsize;
}
-
+
// Quickly ensure that the other sector sizes are factors of the largest
for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
{
@@ -169,9 +169,9 @@ static struct mtd_info *jedec_probe(struct map_info *map)
printk("mtd: Failed. Device has incompatible mixed sector sizes\n");
kfree(MTD);
return NULL;
- }
+ }
}
-
+
/* Generate a part name that includes the number of different chips and
other configuration information */
count = 1;
@@ -181,13 +181,13 @@ static struct mtd_info *jedec_probe(struct map_info *map)
for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
{
const struct JEDECTable *JEDEC;
-
+
if (priv->chips[I+1].jedec == priv->chips[I].jedec)
{
count++;
continue;
}
-
+
// Locate the chip in the jedec table
JEDEC = jedec_idtoinf(priv->chips[I].jedec >> 8,priv->chips[I].jedec);
if (JEDEC == 0)
@@ -196,11 +196,11 @@ static struct mtd_info *jedec_probe(struct map_info *map)
kfree(MTD);
return NULL;
}
-
+
if (Uniq != 0)
strcat(Part,",");
Uniq++;
-
+
if (count != 1)
sprintf(Part+strlen(Part),"%x*[%s]",count,JEDEC->name);
else
@@ -208,7 +208,7 @@ static struct mtd_info *jedec_probe(struct map_info *map)
if (strlen(Part) > sizeof(Part)*2/3)
break;
count = 1;
- }
+ }
/* Determine if the chips are organized in a linear fashion, or if there
are empty banks. Note, the last bank does not count here, only the
@@ -233,7 +233,7 @@ static struct mtd_info *jedec_probe(struct map_info *map)
{
if (priv->bank_fill[I] != my_bank_size)
priv->is_banked = 1;
-
+
/* This even could be eliminated, but new de-optimized read/write
functions have to be written */
printk("priv->bank_fill[%d] is %lx, priv->bank_fill[0] is %lx\n",I,priv->bank_fill[I],priv->bank_fill[0]);
@@ -242,7 +242,7 @@ static struct mtd_info *jedec_probe(struct map_info *map)
printk("mtd: Failed. Cannot handle unsymmetric banking\n");
kfree(MTD);
return NULL;
- }
+ }
}
}
}
@@ -250,7 +250,7 @@ static struct mtd_info *jedec_probe(struct map_info *map)
strcat(Part,", banked");
// printk("Part: '%s'\n",Part);
-
+
memset(MTD,0,sizeof(*MTD));
// strlcpy(MTD->name,Part,sizeof(MTD->name));
MTD->name = map->name;
@@ -291,7 +291,7 @@ static int checkparity(u_char C)
/* Take an array of JEDEC numbers that represent interleved flash chips
and process them. Check to make sure they are good JEDEC numbers, look
- them up and then add them to the chip list */
+ them up and then add them to the chip list */
static int handle_jedecs(struct map_info *map,__u8 *Mfg,__u8 *Id,unsigned Count,
unsigned long base,struct jedec_private *priv)
{
@@ -306,16 +306,16 @@ static int handle_jedecs(struct map_info *map,__u8 *Mfg,__u8 *Id,unsigned Count,
if (checkparity(Mfg[I]) == 0 || checkparity(Id[I]) == 0)
return 0;
}
-
+
// Finally, just make sure all the chip sizes are the same
JEDEC = jedec_idtoinf(Mfg[0],Id[0]);
-
+
if (JEDEC == 0)
{
printk("mtd: Found JEDEC flash chip, but do not have a table entry for %x:%x\n",Mfg[0],Mfg[1]);
return 0;
}
-
+
Size = JEDEC->size;
SectorSize = JEDEC->sectorsize;
for (I = 0; I != Count; I++)
@@ -331,7 +331,7 @@ static int handle_jedecs(struct map_info *map,__u8 *Mfg,__u8 *Id,unsigned Count,
{
printk("mtd: Failed. Interleved flash does not have matching characteristics\n");
return 0;
- }
+ }
}
// Load the Chips
@@ -345,13 +345,13 @@ static int handle_jedecs(struct map_info *map,__u8 *Mfg,__u8 *Id,unsigned Count,
{
printk("mtd: Device has too many chips. Increase MAX_JEDEC_CHIPS\n");
return 0;
- }
-
+ }
+
// Add them to the table
for (J = 0; J != Count; J++)
{
unsigned long Bank;
-
+
JEDEC = jedec_idtoinf(Mfg[J],Id[J]);
priv->chips[I].jedec = (Mfg[J] << 8) | Id[J];
priv->chips[I].size = JEDEC->size;
@@ -364,17 +364,17 @@ static int handle_jedecs(struct map_info *map,__u8 *Mfg,__u8 *Id,unsigned Count,
// log2 n :|
priv->chips[I].addrshift = 0;
for (Bank = Count; Bank != 1; Bank >>= 1, priv->chips[I].addrshift++);
-
+
// Determine how filled this bank is.
Bank = base & (~(my_bank_size-1));
- if (priv->bank_fill[Bank/my_bank_size] < base +
+ if (priv->bank_fill[Bank/my_bank_size] < base +
(JEDEC->size << priv->chips[I].addrshift) - Bank)
priv->bank_fill[Bank/my_bank_size] = base + (JEDEC->size << priv->chips[I].addrshift) - Bank;
I++;
}
priv->size += priv->chips[I-1].size*Count;
-
+
return priv->chips[I-1].size;
}
@@ -392,7 +392,7 @@ static const struct JEDECTable *jedec_idtoinf(__u8 mfr,__u8 id)
// Look for flash using an 8 bit bus interface
static int jedec_probe8(struct map_info *map,unsigned long base,
struct jedec_private *priv)
-{
+{
#define flread(x) map_read8(map,base+x)
#define flwrite(v,x) map_write8(map,v,base+x)
@@ -410,20 +410,20 @@ static int jedec_probe8(struct map_info *map,unsigned long base,
OldVal = flread(base);
for (I = 0; OldVal != flread(base) && I < 10000; I++)
OldVal = flread(base);
-
+
// Reset the chip
- flwrite(Reset,0x555);
-
+ flwrite(Reset,0x555);
+
// Send the sequence
flwrite(AutoSel1,0x555);
flwrite(AutoSel2,0x2AA);
flwrite(AutoSel3,0x555);
-
+
// Get the JEDEC numbers
Mfg[0] = flread(0);
Id[0] = flread(1);
// printk("Mfg is %x, Id is %x\n",Mfg[0],Id[0]);
-
+
Size = handle_jedecs(map,Mfg,Id,1,base,priv);
// printk("handle_jedecs Size is %x\n",(unsigned int)Size);
if (Size == 0)
@@ -431,13 +431,13 @@ static int jedec_probe8(struct map_info *map,unsigned long base,
flwrite(Reset,0x555);
return 0;
}
-
+
// Reset.
flwrite(Reset,0x555);
-
+
return 1;
-
+
#undef flread
#undef flwrite
}
@@ -470,17 +470,17 @@ static int jedec_probe32(struct map_info *map,unsigned long base,
OldVal = flread(base);
for (I = 0; OldVal != flread(base) && I < 10000; I++)
OldVal = flread(base);
-
+
// Reset the chip
- flwrite(Reset,0x555);
-
+ flwrite(Reset,0x555);
+
// Send the sequence
flwrite(AutoSel1,0x555);
flwrite(AutoSel2,0x2AA);
flwrite(AutoSel3,0x555);
-
+
// Test #1, JEDEC numbers are readable from 0x??00/0x??01
- if (flread(0) != flread(0x100) ||
+ if (flread(0) != flread(0x100) ||
flread(1) != flread(0x101))
{
flwrite(Reset,0x555);
@@ -494,14 +494,14 @@ static int jedec_probe32(struct map_info *map,unsigned long base,
OldVal = flread(1);
for (I = 0; I != 4; I++)
Id[I] = (OldVal >> (I*8));
-
+
Size = handle_jedecs(map,Mfg,Id,4,base,priv);
if (Size == 0)
{
flwrite(Reset,0x555);
return 0;
}
-
+
/* Check if there is address wrap around within a single bank, if this
returns JEDEC numbers then we assume that it is wrap around. Notice
we call this routine with the JEDEC return still enabled, if two or
@@ -519,27 +519,27 @@ static int jedec_probe32(struct map_info *map,unsigned long base,
// Reset.
flwrite(0xF0F0F0F0,0x555);
-
+
return 1;
-
+
#undef flread
#undef flwrite
}
/* Linear read. */
-static int jedec_read(struct mtd_info *mtd, loff_t from, size_t len,
+static int jedec_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct map_info *map = mtd->priv;
-
+
map_copy_from(map, buf, from, len);
*retlen = len;
- return 0;
+ return 0;
}
/* Banked read. Take special care to jump past the holes in the bank
mapping. This version assumes symetry in the holes.. */
-static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len,
+static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct map_info *map = mtd->priv;
@@ -555,17 +555,17 @@ static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len,
if (priv->bank_fill[0] - offset < len)
get = priv->bank_fill[0] - offset;
- bank /= priv->bank_fill[0];
+ bank /= priv->bank_fill[0];
map_copy_from(map,buf + *retlen,bank*my_bank_size + offset,get);
-
+
len -= get;
*retlen += get;
from += get;
- }
- return 0;
+ }
+ return 0;
}
-/* Pass the flags value that the flash return before it re-entered read
+/* Pass the flags value that the flash return before it re-entered read
mode. */
static void jedec_flash_failed(unsigned char code)
{
@@ -579,17 +579,17 @@ static void jedec_flash_failed(unsigned char code)
printk("mtd: Programming didn't take\n");
}
-/* This uses the erasure function described in the AMD Flash Handbook,
+/* This uses the erasure function described in the AMD Flash Handbook,
it will work for flashes with a fixed sector size only. Flashes with
a selection of sector sizes (ie the AMD Am29F800B) will need a different
- routine. This routine tries to parallize erasing multiple chips/sectors
+ routine. This routine tries to parallize erasing multiple chips/sectors
where possible */
static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
{
// Does IO to the currently selected chip
#define flread(x) map_read8(map,chip->base+((x)<<chip->addrshift))
#define flwrite(v,x) map_write8(map,v,chip->base+((x)<<chip->addrshift))
-
+
unsigned long Time = 0;
unsigned long NoTime = 0;
unsigned long start = instr->addr, len = instr->len;
@@ -603,7 +603,7 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
(len % mtd->erasesize) != 0 ||
(len/mtd->erasesize) == 0)
return -EINVAL;
-
+
jedec_flash_chip_scan(priv,start,len);
// Start the erase sequence on each chip
@@ -611,16 +611,16 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
{
unsigned long off;
struct jedec_flash_chip *chip = priv->chips + I;
-
+
if (chip->length == 0)
continue;
-
+
if (chip->start + chip->length > chip->size)
{
printk("DIE\n");
return -EIO;
- }
-
+ }
+
flwrite(0xF0,chip->start + 0x555);
flwrite(0xAA,chip->start + 0x555);
flwrite(0x55,chip->start + 0x2AA);
@@ -628,8 +628,8 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
flwrite(0xAA,chip->start + 0x555);
flwrite(0x55,chip->start + 0x2AA);
- /* Once we start selecting the erase sectors the delay between each
- command must not exceed 50us or it will immediately start erasing
+ /* Once we start selecting the erase sectors the delay between each
+ command must not exceed 50us or it will immediately start erasing
and ignore the other sectors */
for (off = 0; off < len; off += chip->sectorsize)
{
@@ -641,19 +641,19 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
{
printk("mtd: Ack! We timed out the erase timer!\n");
return -EIO;
- }
+ }
}
- }
+ }
/* We could split this into a timer routine and return early, performing
background erasure.. Maybe later if the need warrents */
/* Poll the flash for erasure completion, specs say this can take as long
- as 480 seconds to do all the sectors (for a 2 meg flash).
+ as 480 seconds to do all the sectors (for a 2 meg flash).
Erasure time is dependent on chip age, temp and wear.. */
-
+
/* This being a generic routine assumes a 32 bit bus. It does read32s
- and bundles interleved chips into the same grouping. This will work
+ and bundles interleved chips into the same grouping. This will work
for all bus widths */
Time = 0;
NoTime = 0;
@@ -664,20 +664,20 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
unsigned todo[4] = {0,0,0,0};
unsigned todo_left = 0;
unsigned J;
-
+
if (chip->length == 0)
continue;
- /* Find all chips in this data line, realistically this is all
+ /* Find all chips in this data line, realistically this is all
or nothing up to the interleve count */
for (J = 0; priv->chips[J].jedec != 0 && J < MAX_JEDEC_CHIPS; J++)
{
- if ((priv->chips[J].base & (~((1<<chip->addrshift)-1))) ==
+ if ((priv->chips[J].base & (~((1<<chip->addrshift)-1))) ==
(chip->base & (~((1<<chip->addrshift)-1))))
{
todo_left++;
todo[priv->chips[J].base & ((1<<chip->addrshift)-1)] = 1;
- }
+ }
}
/* printk("todo: %x %x %x %x\n",(short)todo[0],(short)todo[1],
@@ -687,7 +687,7 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
{
__u32 Last[4];
unsigned long Count = 0;
-
+
/* During erase bit 7 is held low and bit 6 toggles, we watch this,
should it stop toggling or go high then the erase is completed,
or this is not really flash ;> */
@@ -718,23 +718,23 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
__u8 Byte3 = (Last[(Count-3)%4] >> (J*8)) & 0xFF;
if (todo[J] == 0)
continue;
-
+
if ((Byte1 & (1 << 7)) == 0 && Byte1 != Byte2)
{
// printk("Check %x %x %x\n",(short)J,(short)Byte1,(short)Byte2);
continue;
}
-
+
if (Byte1 == Byte2)
{
jedec_flash_failed(Byte3);
return -EIO;
}
-
+
todo[J] = 0;
todo_left--;
}
-
+
/* if (NoTime == 0)
Time += HZ/10 - schedule_timeout(HZ/10);*/
NoTime = 0;
@@ -751,7 +751,7 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
break;
}
Count++;
-
+
/* // Count time, max of 15s per sector (according to AMD)
if (Time > 15*len/mtd->erasesize*HZ)
{
@@ -759,38 +759,38 @@ static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
return -EIO;
} */
}
-
+
// Skip to the next chip if we used chip erase
if (chip->length == chip->size)
off = chip->size;
else
off += chip->sectorsize;
-
+
if (off >= chip->length)
break;
NoTime = 1;
}
-
+
for (J = 0; priv->chips[J].jedec != 0 && J < MAX_JEDEC_CHIPS; J++)
{
if ((priv->chips[J].base & (~((1<<chip->addrshift)-1))) ==
(chip->base & (~((1<<chip->addrshift)-1))))
priv->chips[J].length = 0;
- }
+ }
}
-
+
//printk("done\n");
instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
return 0;
-
+
#undef flread
#undef flwrite
}
/* This is the simple flash writing function. It writes to every byte, in
sequence. It takes care of how to properly address the flash if
- the flash is interleved. It can only be used if all the chips in the
+ the flash is interleved. It can only be used if all the chips in the
array are identical!*/
static int flash_write(struct mtd_info *mtd, loff_t start, size_t len,
size_t *retlen, const u_char *buf)
@@ -800,25 +800,25 @@ static int flash_write(struct mtd_info *mtd, loff_t start, size_t len,
of addrshift (interleave index) and then adds the control register index. */
#define flread(x) map_read8(map,base+(off&((1<<chip->addrshift)-1))+((x)<<chip->addrshift))
#define flwrite(v,x) map_write8(map,v,base+(off&((1<<chip->addrshift)-1))+((x)<<chip->addrshift))
-
+
struct map_info *map = mtd->priv;
struct jedec_private *priv = map->fldrv_priv;
unsigned long base;
unsigned long off;
size_t save_len = len;
-
+
if (start + len > mtd->size)
return -EIO;
-
+
//printk("Here");
-
+
//printk("flash_write: start is %x, len is %x\n",start,(unsigned long)len);
while (len != 0)
{
struct jedec_flash_chip *chip = priv->chips;
unsigned long bank;
unsigned long boffset;
-
+
// Compute the base of the flash.
off = ((unsigned long)start) % (chip->size << chip->addrshift);
base = start - off;
@@ -828,10 +828,10 @@ static int flash_write(struct mtd_info *mtd, loff_t start, size_t len,
boffset = base & (priv->bank_fill[0]-1);
bank = (bank/priv->bank_fill[0])*my_bank_size;
base = bank + boffset;
-
+
// printk("Flasing %X %X %X\n",base,chip->size,len);
// printk("off is %x, compare with %x\n",off,chip->size << chip->addrshift);
-
+
// Loop over this page
for (; off != (chip->size << chip->addrshift) && len != 0; start++, len--, off++,buf++)
{
@@ -845,7 +845,7 @@ static int flash_write(struct mtd_info *mtd, loff_t start, size_t len,
}
if (((~oldbyte) & *buf) != 0)
printk("mtd: warn: Trying to set a 0 to a 1\n");
-
+
// Write
flwrite(0xAA,0x555);
flwrite(0x55,0x2AA);
@@ -854,10 +854,10 @@ static int flash_write(struct mtd_info *mtd, loff_t start, size_t len,
Last[0] = map_read8(map,base + off);
Last[1] = map_read8(map,base + off);
Last[2] = map_read8(map,base + off);
-
+
/* Wait for the flash to finish the operation. We store the last 4
status bytes that have been retrieved so we can determine why
- it failed. The toggle bits keep toggling when there is a
+ it failed. The toggle bits keep toggling when there is a
failure */
for (Count = 3; Last[(Count - 1) % 4] != Last[(Count - 2) % 4] &&
Count < 10000; Count++)
@@ -866,7 +866,7 @@ static int flash_write(struct mtd_info *mtd, loff_t start, size_t len,
{
jedec_flash_failed(Last[(Count - 3) % 4]);
return -EIO;
- }
+ }
}
}
*retlen = save_len;
@@ -885,24 +885,24 @@ static void jedec_flash_chip_scan(struct jedec_private *priv,unsigned long start
// Zero the records
for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
priv->chips[I].start = priv->chips[I].length = 0;
-
+
// Intersect the region with each chip
for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
{
struct jedec_flash_chip *chip = priv->chips + I;
unsigned long ByteStart;
unsigned long ChipEndByte = chip->offset + (chip->size << chip->addrshift);
-
+
// End is before this chip or the start is after it
if (start+len < chip->offset ||
ChipEndByte - (1 << chip->addrshift) < start)
continue;
-
+
if (start < chip->offset)
{
ByteStart = chip->offset;
chip->start = 0;
- }
+ }
else
{
chip->start = (start - chip->offset + (1 << chip->addrshift)-1) >> chip->addrshift;