diff options
Diffstat (limited to 'drivers/mtd/chips/jedec_probe.c')
-rw-r--r-- | drivers/mtd/chips/jedec_probe.c | 135 |
1 files changed, 126 insertions, 9 deletions
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index aa07575eb28..f84ab618214 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1,7 +1,6 @@ /* Common Flash Interface probe code. (C) 2000 Red Hat. GPL'd. - $Id: jedec_probe.c,v 1.66 2005/11/07 11:14:23 gleixner Exp $ See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5) for the standard this probe goes back to. @@ -26,6 +25,7 @@ /* Manufacturers */ #define MANUFACTURER_AMD 0x0001 #define MANUFACTURER_ATMEL 0x001f +#define MANUFACTURER_EON 0x001c #define MANUFACTURER_FUJITSU 0x0004 #define MANUFACTURER_HYUNDAI 0x00AD #define MANUFACTURER_INTEL 0x0089 @@ -37,10 +37,11 @@ #define MANUFACTURER_ST 0x0020 #define MANUFACTURER_TOSHIBA 0x0098 #define MANUFACTURER_WINBOND 0x00da +#define CONTINUATION_CODE 0x007f /* AMD */ -#define AM29DL800BB 0x22C8 +#define AM29DL800BB 0x22CB #define AM29DL800BT 0x224A #define AM29F800BB 0x2258 @@ -58,6 +59,8 @@ #define AM29LV040B 0x004F #define AM29F032B 0x0041 #define AM29F002T 0x00B0 +#define AM29SL800DB 0x226B +#define AM29SL800DT 0x22EA /* Atmel */ #define AT49BV512 0x0003 @@ -67,6 +70,10 @@ #define AT49BV32X 0x00C8 #define AT49BV32XT 0x00C9 +/* Eon */ +#define EN29SL800BB 0x226B +#define EN29SL800BT 0x22EA + /* Fujitsu */ #define MBM29F040C 0x00A4 #define MBM29F800BA 0x2258 @@ -141,6 +148,8 @@ #define M50FW080 0x002D #define M50FW016 0x002E #define M50LPW080 0x002F +#define M50FLW080A 0x0080 +#define M50FLW080B 0x0081 /* SST */ #define SST29EE020 0x0010 @@ -191,6 +200,7 @@ enum uaddr { MTD_UADDR_0x0555_0x0AAA, MTD_UADDR_0x5555_0x2AAA, MTD_UADDR_0x0AAA_0x0555, + MTD_UADDR_0xAAAA_0x5555, MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */ MTD_UADDR_UNNECESSARY, /* Does not require any address */ }; @@ -238,6 +248,11 @@ static const struct unlock_addr unlock_addrs[] = { .addr2 = 0x0555 }, + [MTD_UADDR_0xAAAA_0x5555] = { + .addr1 = 0xaaaa, + .addr2 = 0x5555 + }, + [MTD_UADDR_DONT_CARE] = { .addr1 = 0x0000, /* Doesn't matter which address */ .addr2 = 0x0000 /* is used - must be last entry */ @@ -522,6 +537,36 @@ static const struct amd_flash_info jedec_table[] = { ERASEINFO(0x04000,1), } }, { + .mfr_id = MANUFACTURER_AMD, + .dev_id = AM29SL800DT, + .name = "AMD AM29SL800DT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,15), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = MANUFACTURER_AMD, + .dev_id = AM29SL800DB, + .name = "AMD AM29SL800DB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15), + } + }, { .mfr_id = MANUFACTURER_ATMEL, .dev_id = AT49BV512, .name = "Atmel AT49BV512", @@ -599,6 +644,36 @@ static const struct amd_flash_info jedec_table[] = { ERASEINFO(0x02000,8) } }, { + .mfr_id = MANUFACTURER_EON, + .dev_id = EN29SL800BT, + .name = "Eon EN29SL800BT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,15), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = MANUFACTURER_EON, + .dev_id = EN29SL800BB, + .name = "Eon EN29SL800BB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15), + } + }, { .mfr_id = MANUFACTURER_FUJITSU, .dev_id = MBM29F040C, .name = "Fujitsu MBM29F040C", @@ -1392,8 +1467,8 @@ static const struct amd_flash_info jedec_table[] = { .mfr_id = MANUFACTURER_SST, /* should be CFI */ .dev_id = SST39LF160, .name = "SST 39LF160", - .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, - .uaddr = MTD_UADDR_0x5555_0x2AAA, /* ???? */ + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, .dev_size = SIZE_2MiB, .cmd_set = P_ID_AMD_STD, .nr_regions = 2, @@ -1405,8 +1480,8 @@ static const struct amd_flash_info jedec_table[] = { .mfr_id = MANUFACTURER_SST, /* should be CFI */ .dev_id = SST39VF1601, .name = "SST 39VF1601", - .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, - .uaddr = MTD_UADDR_0x5555_0x2AAA, /* ???? */ + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, .dev_size = SIZE_2MiB, .cmd_set = P_ID_AMD_STD, .nr_regions = 2, @@ -1590,6 +1665,36 @@ static const struct amd_flash_info jedec_table[] = { .nr_regions = 1, .regions = { ERASEINFO(0x10000,16), + }, + }, { + .mfr_id = MANUFACTURER_ST, + .dev_id = M50FLW080A, + .name = "ST M50FLW080A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 4, + .regions = { + ERASEINFO(0x1000,16), + ERASEINFO(0x10000,13), + ERASEINFO(0x1000,16), + ERASEINFO(0x1000,16), + } + }, { + .mfr_id = MANUFACTURER_ST, + .dev_id = M50FLW080B, + .name = "ST M50FLW080B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 4, + .regions = { + ERASEINFO(0x1000,16), + ERASEINFO(0x1000,16), + ERASEINFO(0x10000,13), + ERASEINFO(0x1000,16), } }, { .mfr_id = MANUFACTURER_TOSHIBA, @@ -1696,9 +1801,21 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base, { map_word result; unsigned long mask; - u32 ofs = cfi_build_cmd_addr(0, cfi_interleave(cfi), cfi->device_type); - mask = (1 << (cfi->device_type * 8)) -1; - result = map_read(map, base + ofs); + int bank = 0; + + /* According to JEDEC "Standard Manufacturer's Identification Code" + * (http://www.jedec.org/download/search/jep106W.pdf) + * several first banks can contain 0x7f instead of actual ID + */ + do { + uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), + cfi_interleave(cfi), + cfi->device_type); + mask = (1 << (cfi->device_type * 8)) - 1; + result = map_read(map, base + ofs); + bank++; + } while ((result.x[0] & mask) == CONTINUATION_CODE); + return result.x[0] & mask; } |