summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/devices/m25p80.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/devices/m25p80.c')
-rw-r--r--drivers/mtd/devices/m25p80.c138
1 files changed, 89 insertions, 49 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index b35c3333e21..76a76751da3 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -39,6 +39,7 @@
#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
+#define OPCODE_BE 0xc7 /* Erase whole flash block */
#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
@@ -161,6 +162,31 @@ static int wait_till_ready(struct m25p *flash)
return 1;
}
+/*
+ * Erase the whole flash memory
+ *
+ * Returns 0 if successful, non-zero otherwise.
+ */
+static int erase_block(struct m25p *flash)
+{
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n",
+ flash->spi->dev.bus_id, __func__,
+ flash->mtd.size / 1024);
+
+ /* Wait until finished previous write command. */
+ if (wait_till_ready(flash))
+ return 1;
+
+ /* Send write enable, then erase commands. */
+ write_enable(flash);
+
+ /* Set up command buffer. */
+ flash->command[0] = OPCODE_BE;
+
+ spi_write(flash->spi, flash->command, 1);
+
+ return 0;
+}
/*
* Erase one sector of flash memory at offset ``offset'' which is any
@@ -229,15 +255,21 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
*/
/* now erase those sectors */
- while (len) {
- if (erase_sector(flash, addr)) {
- instr->state = MTD_ERASE_FAILED;
- mutex_unlock(&flash->lock);
- return -EIO;
- }
+ if (len == flash->mtd.size && erase_block(flash)) {
+ instr->state = MTD_ERASE_FAILED;
+ mutex_unlock(&flash->lock);
+ return -EIO;
+ } else {
+ while (len) {
+ if (erase_sector(flash, addr)) {
+ instr->state = MTD_ERASE_FAILED;
+ mutex_unlock(&flash->lock);
+ return -EIO;
+ }
- addr += mtd->erasesize;
- len -= mtd->erasesize;
+ addr += mtd->erasesize;
+ len -= mtd->erasesize;
+ }
}
mutex_unlock(&flash->lock);
@@ -437,6 +469,7 @@ struct flash_info {
* then a two byte device id.
*/
u32 jedec_id;
+ u16 ext_id;
/* The size listed here is what works with OPCODE_SE, which isn't
* necessarily called a "sector" by the vendor.
@@ -456,72 +489,75 @@ struct flash_info {
static struct flash_info __devinitdata m25p_data [] = {
/* Atmel -- some are (confusingly) marketed as "DataFlash" */
- { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, },
- { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, },
+ { "at25fs010", 0x1f6601, 0, 32 * 1024, 4, SECT_4K, },
+ { "at25fs040", 0x1f6604, 0, 64 * 1024, 8, SECT_4K, },
- { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
- { "at25df641", 0x1f4800, 64 * 1024, 128, SECT_4K, },
+ { "at25df041a", 0x1f4401, 0, 64 * 1024, 8, SECT_4K, },
+ { "at25df641", 0x1f4800, 0, 64 * 1024, 128, SECT_4K, },
- { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, },
- { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
- { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
- { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
+ { "at26f004", 0x1f0400, 0, 64 * 1024, 8, SECT_4K, },
+ { "at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K, },
+ { "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
+ { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
- { "s25sl004a", 0x010212, 64 * 1024, 8, },
- { "s25sl008a", 0x010213, 64 * 1024, 16, },
- { "s25sl016a", 0x010214, 64 * 1024, 32, },
- { "s25sl032a", 0x010215, 64 * 1024, 64, },
- { "s25sl064a", 0x010216, 64 * 1024, 128, },
+ { "s25sl004a", 0x010212, 0, 64 * 1024, 8, },
+ { "s25sl008a", 0x010213, 0, 64 * 1024, 16, },
+ { "s25sl016a", 0x010214, 0, 64 * 1024, 32, },
+ { "s25sl032a", 0x010215, 0, 64 * 1024, 64, },
+ { "s25sl064a", 0x010216, 0, 64 * 1024, 128, },
+ { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
+ { "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, },
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
- { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
- { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
- { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
- { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
+ { "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, },
+ { "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, },
+ { "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, },
+ { "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, },
/* ST Microelectronics -- newer production may have feature updates */
- { "m25p05", 0x202010, 32 * 1024, 2, },
- { "m25p10", 0x202011, 32 * 1024, 4, },
- { "m25p20", 0x202012, 64 * 1024, 4, },
- { "m25p40", 0x202013, 64 * 1024, 8, },
- { "m25p80", 0, 64 * 1024, 16, },
- { "m25p16", 0x202015, 64 * 1024, 32, },
- { "m25p32", 0x202016, 64 * 1024, 64, },
- { "m25p64", 0x202017, 64 * 1024, 128, },
- { "m25p128", 0x202018, 256 * 1024, 64, },
-
- { "m45pe80", 0x204014, 64 * 1024, 16, },
- { "m45pe16", 0x204015, 64 * 1024, 32, },
-
- { "m25pe80", 0x208014, 64 * 1024, 16, },
- { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, },
+ { "m25p05", 0x202010, 0, 32 * 1024, 2, },
+ { "m25p10", 0x202011, 0, 32 * 1024, 4, },
+ { "m25p20", 0x202012, 0, 64 * 1024, 4, },
+ { "m25p40", 0x202013, 0, 64 * 1024, 8, },
+ { "m25p80", 0, 0, 64 * 1024, 16, },
+ { "m25p16", 0x202015, 0, 64 * 1024, 32, },
+ { "m25p32", 0x202016, 0, 64 * 1024, 64, },
+ { "m25p64", 0x202017, 0, 64 * 1024, 128, },
+ { "m25p128", 0x202018, 0, 256 * 1024, 64, },
+
+ { "m45pe80", 0x204014, 0, 64 * 1024, 16, },
+ { "m45pe16", 0x204015, 0, 64 * 1024, 32, },
+
+ { "m25pe80", 0x208014, 0, 64 * 1024, 16, },
+ { "m25pe16", 0x208015, 0, 64 * 1024, 32, SECT_4K, },
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
- { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
- { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
- { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
- { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
- { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
- { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
- { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
+ { "w25x10", 0xef3011, 0, 64 * 1024, 2, SECT_4K, },
+ { "w25x20", 0xef3012, 0, 64 * 1024, 4, SECT_4K, },
+ { "w25x40", 0xef3013, 0, 64 * 1024, 8, SECT_4K, },
+ { "w25x80", 0xef3014, 0, 64 * 1024, 16, SECT_4K, },
+ { "w25x16", 0xef3015, 0, 64 * 1024, 32, SECT_4K, },
+ { "w25x32", 0xef3016, 0, 64 * 1024, 64, SECT_4K, },
+ { "w25x64", 0xef3017, 0, 64 * 1024, 128, SECT_4K, },
};
static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
{
int tmp;
u8 code = OPCODE_RDID;
- u8 id[3];
+ u8 id[5];
u32 jedec;
+ u16 ext_jedec;
struct flash_info *info;
/* JEDEC also defines an optional "extended device information"
* string for after vendor-specific data, after the three bytes
* we use here. Supporting some chips might require using it.
*/
- tmp = spi_write_then_read(spi, &code, 1, id, 3);
+ tmp = spi_write_then_read(spi, &code, 1, id, 5);
if (tmp < 0) {
DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
spi->dev.bus_id, tmp);
@@ -533,10 +569,14 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
jedec = jedec << 8;
jedec |= id[2];
+ ext_jedec = id[3] << 8 | id[4];
+
for (tmp = 0, info = m25p_data;
tmp < ARRAY_SIZE(m25p_data);
tmp++, info++) {
if (info->jedec_id == jedec)
+ if (ext_jedec != 0 && info->ext_id != ext_jedec)
+ continue;
return info;
}
dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);