diff options
Diffstat (limited to 'drivers/mtd/devices/mtd_dataflash.c')
-rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 135 |
1 files changed, 121 insertions, 14 deletions
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index b35e4813a3a..54e36bfc2c3 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -82,7 +82,7 @@ struct dataflash { - u8 command[4]; + uint8_t command[4]; char name[24]; unsigned partitioned:1; @@ -150,7 +150,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) struct spi_transfer x = { .tx_dma = 0, }; struct spi_message msg; unsigned blocksize = priv->page_size << 3; - u8 *command; + uint8_t *command; DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n", spi->dev.bus_id, @@ -182,8 +182,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) pageaddr = pageaddr << priv->page_offset; command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; - command[1] = (u8)(pageaddr >> 16); - command[2] = (u8)(pageaddr >> 8); + command[1] = (uint8_t)(pageaddr >> 16); + command[2] = (uint8_t)(pageaddr >> 8); command[3] = 0; DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n", @@ -234,7 +234,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, struct spi_transfer x[2] = { { .tx_dma = 0, }, }; struct spi_message msg; unsigned int addr; - u8 *command; + uint8_t *command; int status; DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n", @@ -274,9 +274,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, * fewer "don't care" bytes. Both buffers stay unchanged. */ command[0] = OP_READ_CONTINUOUS; - command[1] = (u8)(addr >> 16); - command[2] = (u8)(addr >> 8); - command[3] = (u8)(addr >> 0); + command[1] = (uint8_t)(addr >> 16); + command[2] = (uint8_t)(addr >> 8); + command[3] = (uint8_t)(addr >> 0); /* plus 4 "don't care" bytes */ status = spi_sync(priv->spi, &msg); @@ -311,7 +311,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t remaining = len; u_char *writebuf = (u_char *) buf; int status = -EINVAL; - u8 *command; + uint8_t *command; DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n", spi->dev.bus_id, (unsigned)to, (unsigned)(to + len)); @@ -487,7 +487,9 @@ add_dataflash(struct spi_device *spi, char *name, device->write = dataflash_write; device->priv = priv; - dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024); + dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, " + "erasesize %d bytes\n", name, device->size/1024, + pagesize, pagesize * 8); /* 8 pages = 1 block */ dev_set_drvdata(&spi->dev, priv); if (mtd_has_partitions()) { @@ -521,7 +523,7 @@ add_dataflash(struct spi_device *spi, char *name, * * Device Density ID code #Pages PageSize Offset * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 - * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9 + * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 @@ -529,9 +531,114 @@ add_dataflash(struct spi_device *spi, char *name, * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 */ + +struct flash_info { + char *name; + + /* JEDEC id zero means "no ID" (most older chips); otherwise it has + * a high byte of zero plus three data bytes: the manufacturer id, + * then a two byte device id. + */ + uint32_t jedec_id; + + /* The size listed here is what works with OPCODE_SE, which isn't + * necessarily called a "sector" by the vendor. + */ + unsigned nr_pages; + uint16_t pagesize; + uint16_t pageoffset; + + uint16_t flags; +#define SUP_POW2PS 0x02 +#define IS_POW2PS 0x01 +}; + +static struct flash_info __devinitdata dataflash_data [] = { + + { "at45db011d", 0x1f2200, 512, 264, 9, SUP_POW2PS}, + { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "at45db021d", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, + { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "at45db041d", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, + { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "at45db081d", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, + { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "at45db161d", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, + { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, + + { "at45db321c", 0x1f2700, 8192, 528, 10, }, + + { "at45db321d", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, + { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, + + { "at45db641d", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, + { "at45db641d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, +}; + +static struct flash_info *__devinit jedec_probe(struct spi_device *spi) +{ + int tmp; + uint8_t code = OP_READ_ID; + uint8_t id[3]; + uint32_t jedec; + struct flash_info *info; + int status; + + + /* JEDEC also defines an optional "extended device information" + * string for after vendor-specific data, after the three bytes + * we use here. Supporting some chips might require using it. + */ + tmp = spi_write_then_read(spi, &code, 1, id, 3); + if (tmp < 0) { + DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", + spi->dev.bus_id, tmp); + return NULL; + } + jedec = id[0]; + jedec = jedec << 8; + jedec |= id[1]; + jedec = jedec << 8; + jedec |= id[2]; + + for (tmp = 0, info = dataflash_data; + tmp < ARRAY_SIZE(dataflash_data); + tmp++, info++) { + if (info->jedec_id == jedec) { + if (info->flags & SUP_POW2PS) { + status = dataflash_status(spi); + if (status & 0x1) + /* return power of 2 pagesize */ + return ++info; + else + return info; + } + } + } + return NULL; +} + static int __devinit dataflash_probe(struct spi_device *spi) { int status; + struct flash_info *info; + + /* + * Try to detect dataflash by JEDEC ID. + * If it succeeds we know we have either a C or D part. + * D will support power of 2 pagesize option. + */ + + info = jedec_probe(spi); + + if (info != NULL) + return add_dataflash(spi, info->name, info->nr_pages, + info->pagesize, info->pageoffset); + status = dataflash_status(spi); if (status <= 0 || status == 0xff) { @@ -551,16 +658,16 @@ static int __devinit dataflash_probe(struct spi_device *spi) status = add_dataflash(spi, "AT45DB011B", 512, 264, 9); break; case 0x14: /* 0 1 0 1 x x */ - status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9); + status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9); break; case 0x1c: /* 0 1 1 1 x x */ - status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9); + status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9); break; case 0x24: /* 1 0 0 1 x x */ status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9); break; case 0x2c: /* 1 0 1 1 x x */ - status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10); + status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10); break; case 0x34: /* 1 1 0 1 x x */ status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10); |