summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/devices
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/devices')
-rw-r--r--drivers/mtd/devices/Kconfig8
-rw-r--r--drivers/mtd/devices/Makefile1
-rw-r--r--drivers/mtd/devices/block2mtd.c19
-rw-r--r--drivers/mtd/devices/elm.c49
-rw-r--r--drivers/mtd/devices/m25p80.c35
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c24
-rw-r--r--drivers/mtd/devices/phram.c41
-rw-r--r--drivers/mtd/devices/pmc551.c7
-rw-r--r--drivers/mtd/devices/serial_flash_cmds.h81
-rw-r--r--drivers/mtd/devices/spear_smi.c2
-rw-r--r--drivers/mtd/devices/sst25l.c1
-rw-r--r--drivers/mtd/devices/st_spi_fsm.c2108
12 files changed, 2318 insertions, 58 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 01281382180..1210bc2923b 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -210,6 +210,14 @@ config MTD_DOCG3
M-Systems and now Sandisk. The support is very experimental,
and doesn't give access to any write operations.
+config MTD_ST_SPI_FSM
+ tristate "ST Microelectronics SPI FSM Serial Flash Controller"
+ depends on ARM || SH
+ help
+ This provides an MTD device driver for the ST Microelectronics
+ SPI Fast Sequence Mode (FSM) Serial Flash Controller and support
+ for a subset of connected Serial Flash devices.
+
if MTD_DOCG3
config BCH_CONST_M
default 14
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index d83bd73096f..c68868f6058 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_NAND_OMAP_BCH) += elm.o
obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
+obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o
CFLAGS_docg3.o += -I$(src)
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index d9fd87a4c8d..66f0405f7e5 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -209,7 +209,6 @@ static void block2mtd_free_device(struct block2mtd_dev *dev)
}
-/* FIXME: ensure that mtd->size % erase_size == 0 */
static struct block2mtd_dev *add_device(char *devname, int erase_size)
{
const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
@@ -240,13 +239,18 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
if (IS_ERR(bdev)) {
pr_err("error: cannot open device %s\n", devname);
- goto devinit_err;
+ goto err_free_block2mtd;
}
dev->blkdev = bdev;
if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
pr_err("attempting to use an MTD device as a block device\n");
- goto devinit_err;
+ goto err_free_block2mtd;
+ }
+
+ if ((long)dev->blkdev->bd_inode->i_size % erase_size) {
+ pr_err("erasesize must be a divisor of device size\n");
+ goto err_free_block2mtd;
}
mutex_init(&dev->write_mutex);
@@ -255,7 +259,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
/* make the name contain the block device in */
name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
if (!name)
- goto devinit_err;
+ goto err_destroy_mutex;
dev->mtd.name = name;
@@ -274,7 +278,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
if (mtd_device_register(&dev->mtd, NULL, 0)) {
/* Device didn't get added, so free the entry */
- goto devinit_err;
+ goto err_destroy_mutex;
}
list_add(&dev->list, &blkmtd_device_list);
pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
@@ -283,7 +287,9 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
dev->mtd.erasesize >> 10, dev->mtd.erasesize);
return dev;
-devinit_err:
+err_destroy_mutex:
+ mutex_destroy(&dev->write_mutex);
+err_free_block2mtd:
block2mtd_free_device(dev);
return NULL;
}
@@ -448,6 +454,7 @@ static void block2mtd_exit(void)
struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list);
block2mtd_sync(&dev->mtd);
mtd_device_unregister(&dev->mtd);
+ mutex_destroy(&dev->write_mutex);
pr_info("mtd%d: [%s] removed\n",
dev->mtd.index,
dev->mtd.name + strlen("block2mtd: "));
diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
index d1dd6a33a05..1fd4a0f7796 100644
--- a/drivers/mtd/devices/elm.c
+++ b/drivers/mtd/devices/elm.c
@@ -15,6 +15,8 @@
*
*/
+#define DRIVER_NAME "omap-elm"
+
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -84,6 +86,8 @@ struct elm_info {
struct list_head list;
enum bch_ecc bch_type;
struct elm_registers elm_regs;
+ int ecc_steps;
+ int ecc_syndrome_size;
};
static LIST_HEAD(elm_devices);
@@ -103,7 +107,8 @@ static u32 elm_read_reg(struct elm_info *info, int offset)
* @dev: ELM device
* @bch_type: Type of BCH ecc
*/
-int elm_config(struct device *dev, enum bch_ecc bch_type)
+int elm_config(struct device *dev, enum bch_ecc bch_type,
+ int ecc_steps, int ecc_step_size, int ecc_syndrome_size)
{
u32 reg_val;
struct elm_info *info = dev_get_drvdata(dev);
@@ -112,10 +117,22 @@ int elm_config(struct device *dev, enum bch_ecc bch_type)
dev_err(dev, "Unable to configure elm - device not probed?\n");
return -ENODEV;
}
+ /* ELM cannot detect ECC errors for chunks > 1KB */
+ if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) {
+ dev_err(dev, "unsupported config ecc-size=%d\n", ecc_step_size);
+ return -EINVAL;
+ }
+ /* ELM support 8 error syndrome process */
+ if (ecc_steps > ERROR_VECTOR_MAX) {
+ dev_err(dev, "unsupported config ecc-step=%d\n", ecc_steps);
+ return -EINVAL;
+ }
reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16);
elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val);
- info->bch_type = bch_type;
+ info->bch_type = bch_type;
+ info->ecc_steps = ecc_steps;
+ info->ecc_syndrome_size = ecc_syndrome_size;
return 0;
}
@@ -157,17 +174,15 @@ static void elm_load_syndrome(struct elm_info *info,
int i, offset;
u32 val;
- for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+ for (i = 0; i < info->ecc_steps; i++) {
/* Check error reported */
if (err_vec[i].error_reported) {
elm_configure_page_mode(info, i, true);
offset = ELM_SYNDROME_FRAGMENT_0 +
SYNDROME_FRAGMENT_REG_SIZE * i;
-
- /* BCH8 */
- if (info->bch_type) {
-
+ switch (info->bch_type) {
+ case BCH8_ECC:
/* syndrome fragment 0 = ecc[9-12B] */
val = cpu_to_be32(*(u32 *) &ecc[9]);
elm_write_reg(info, offset, val);
@@ -186,7 +201,8 @@ static void elm_load_syndrome(struct elm_info *info,
offset += 4;
val = ecc[0];
elm_write_reg(info, offset, val);
- } else {
+ break;
+ case BCH4_ECC:
/* syndrome fragment 0 = ecc[20-52b] bits */
val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) |
((ecc[2] & 0xf) << 28);
@@ -196,11 +212,14 @@ static void elm_load_syndrome(struct elm_info *info,
offset += 4;
val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12;
elm_write_reg(info, offset, val);
+ break;
+ default:
+ pr_err("invalid config bch_type\n");
}
}
/* Update ecc pointer with ecc byte size */
- ecc += info->bch_type ? BCH8_SIZE : BCH4_SIZE;
+ ecc += info->ecc_syndrome_size;
}
}
@@ -223,7 +242,7 @@ static void elm_start_processing(struct elm_info *info,
* Set syndrome vector valid, so that ELM module
* will process it for vectors error is reported
*/
- for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+ for (i = 0; i < info->ecc_steps; i++) {
if (err_vec[i].error_reported) {
offset = ELM_SYNDROME_FRAGMENT_6 +
SYNDROME_FRAGMENT_REG_SIZE * i;
@@ -252,7 +271,7 @@ static void elm_error_correction(struct elm_info *info,
int offset;
u32 reg_val;
- for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+ for (i = 0; i < info->ecc_steps; i++) {
/* Check error reported */
if (err_vec[i].error_reported) {
@@ -354,10 +373,8 @@ static int elm_probe(struct platform_device *pdev)
struct elm_info *info;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
- if (!info) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
+ if (!info)
return -ENOMEM;
- }
info->dev = &pdev->dev;
@@ -380,7 +397,7 @@ static int elm_probe(struct platform_device *pdev)
}
pm_runtime_enable(&pdev->dev);
- if (pm_runtime_get_sync(&pdev->dev)) {
+ if (pm_runtime_get_sync(&pdev->dev) < 0) {
ret = -EINVAL;
pm_runtime_disable(&pdev->dev);
dev_err(&pdev->dev, "can't enable clock\n");
@@ -505,7 +522,7 @@ MODULE_DEVICE_TABLE(of, elm_of_match);
static struct platform_driver elm_driver = {
.driver = {
- .name = "elm",
+ .name = DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(elm_of_match),
.pm = &elm_pm_ops,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index ad191390970..524dab3ac93 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -15,7 +15,6 @@
*
*/
-#include <linux/init.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/module.h>
@@ -41,7 +40,8 @@
#define OPCODE_WRSR 0x01 /* Write status register 1 byte */
#define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */
#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
-#define OPCODE_QUAD_READ 0x6b /* Read data bytes */
+#define OPCODE_DUAL_READ 0x3b /* Read data bytes (Dual SPI) */
+#define OPCODE_QUAD_READ 0x6b /* Read data bytes (Quad SPI) */
#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
@@ -54,7 +54,8 @@
/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
#define OPCODE_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */
#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */
-#define OPCODE_QUAD_READ_4B 0x6c /* Read data bytes */
+#define OPCODE_DUAL_READ_4B 0x3c /* Read data bytes (Dual SPI) */
+#define OPCODE_QUAD_READ_4B 0x6c /* Read data bytes (Quad SPI) */
#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */
#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */
@@ -95,6 +96,7 @@
enum read_type {
M25P80_NORMAL = 0,
M25P80_FAST,
+ M25P80_DUAL,
M25P80_QUAD,
};
@@ -479,6 +481,7 @@ static inline int m25p80_dummy_cycles_read(struct m25p *flash)
{
switch (flash->flash_read) {
case M25P80_FAST:
+ case M25P80_DUAL:
case M25P80_QUAD:
return 1;
case M25P80_NORMAL:
@@ -492,6 +495,8 @@ static inline int m25p80_dummy_cycles_read(struct m25p *flash)
static inline unsigned int m25p80_rx_nbits(const struct m25p *flash)
{
switch (flash->flash_read) {
+ case M25P80_DUAL:
+ return 2;
case M25P80_QUAD:
return 4;
default:
@@ -855,7 +860,8 @@ struct flash_info {
#define SST_WRITE 0x04 /* use SST byte programming */
#define M25P_NO_FR 0x08 /* Can't do fastread */
#define SECT_4K_PMC 0x10 /* OPCODE_BE_4K_PMC works uniformly */
-#define M25P80_QUAD_READ 0x20 /* Flash supports Quad Read */
+#define M25P80_DUAL_READ 0x20 /* Flash supports Dual Read */
+#define M25P80_QUAD_READ 0x40 /* Flash supports Quad Read */
};
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
@@ -934,6 +940,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, M25P80_QUAD_READ) },
+ { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, M25P80_QUAD_READ) },
/* Micron */
{ "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
@@ -953,8 +960,8 @@ static const struct spi_device_id m25p_ids[] = {
{ "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, 0) },
{ "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, 0) },
{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
- { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, M25P80_QUAD_READ) },
- { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, M25P80_QUAD_READ) },
+ { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, M25P80_DUAL_READ | M25P80_QUAD_READ) },
+ { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, M25P80_DUAL_READ | M25P80_QUAD_READ) },
{ "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
@@ -965,6 +972,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
{ "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
{ "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
+ { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) },
{ "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
@@ -1072,9 +1080,8 @@ static const struct spi_device_id *jedec_probe(struct spi_device *spi)
for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
info = (void *)m25p_ids[tmp].driver_data;
if (info->jedec_id == jedec) {
- if (info->ext_id != 0 && info->ext_id != ext_jedec)
- continue;
- return &m25p_ids[tmp];
+ if (info->ext_id == 0 || info->ext_id == ext_jedec)
+ return &m25p_ids[tmp];
}
}
dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
@@ -1226,7 +1233,7 @@ static int m25p_probe(struct spi_device *spi)
if (info->flags & M25P_NO_FR)
flash->flash_read = M25P80_NORMAL;
- /* Quad-read mode takes precedence over fast/normal */
+ /* Quad/Dual-read mode takes precedence over fast/normal */
if (spi->mode & SPI_RX_QUAD && info->flags & M25P80_QUAD_READ) {
ret = set_quad_mode(flash, info->jedec_id);
if (ret) {
@@ -1234,6 +1241,8 @@ static int m25p_probe(struct spi_device *spi)
return ret;
}
flash->flash_read = M25P80_QUAD;
+ } else if (spi->mode & SPI_RX_DUAL && info->flags & M25P80_DUAL_READ) {
+ flash->flash_read = M25P80_DUAL;
}
/* Default commands */
@@ -1241,6 +1250,9 @@ static int m25p_probe(struct spi_device *spi)
case M25P80_QUAD:
flash->read_opcode = OPCODE_QUAD_READ;
break;
+ case M25P80_DUAL:
+ flash->read_opcode = OPCODE_DUAL_READ;
+ break;
case M25P80_FAST:
flash->read_opcode = OPCODE_FAST_READ;
break;
@@ -1265,6 +1277,9 @@ static int m25p_probe(struct spi_device *spi)
case M25P80_QUAD:
flash->read_opcode = OPCODE_QUAD_READ_4B;
break;
+ case M25P80_DUAL:
+ flash->read_opcode = OPCODE_DUAL_READ_4B;
+ break;
case M25P80_FAST:
flash->read_opcode = OPCODE_FAST_READ_4B;
break;
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 624069de4f2..dd22ce2cc9a 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -10,7 +10,6 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -440,8 +439,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
#ifdef CONFIG_MTD_DATAFLASH_OTP
-static int dataflash_get_otp_info(struct mtd_info *mtd,
- struct otp_info *info, size_t len)
+static int dataflash_get_otp_info(struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *info)
{
/* Report both blocks as identical: bytes 0..64, locked.
* Unless the user block changed from all-ones, we can't
@@ -450,7 +449,8 @@ static int dataflash_get_otp_info(struct mtd_info *mtd,
info->start = 0;
info->length = 64;
info->locked = 1;
- return sizeof(*info);
+ *retlen = sizeof(*info);
+ return 0;
}
static ssize_t otp_read(struct spi_device *spi, unsigned base,
@@ -542,14 +542,18 @@ static int dataflash_write_user_otp(struct mtd_info *mtd,
struct dataflash *priv = mtd->priv;
int status;
- if (len > 64)
- return -EINVAL;
+ if (from >= 64) {
+ /*
+ * Attempting to write beyond the end of OTP memory,
+ * no data can be written.
+ */
+ *retlen = 0;
+ return 0;
+ }
- /* Strictly speaking, we *could* truncate the write ... but
- * let's not do that for the only write that's ever possible.
- */
+ /* Truncate the write to fit into OTP memory. */
if ((from + len) > 64)
- return -EINVAL;
+ len = 64 - from;
/* OUT: OP_WRITE_SECURITY, 3 zeroes, 64 data-or-zero bytes
* IN: ignore all
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index e1f2aebaa48..2cceebfb251 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -205,6 +205,8 @@ static inline void kill_final_newline(char *str)
return 1; \
} while (0)
+#ifndef MODULE
+static int phram_init_called;
/*
* This shall contain the module parameter if any. It is of the form:
* - phram=<device>,<address>,<size> for module case
@@ -213,9 +215,10 @@ static inline void kill_final_newline(char *str)
* size.
* Example: phram.phram=rootfs,0xa0000000,512Mi
*/
-static __initdata char phram_paramline[64 + 20 + 20];
+static char phram_paramline[64 + 20 + 20];
+#endif
-static int __init phram_setup(const char *val)
+static int phram_setup(const char *val)
{
char buf[64 + 20 + 20], *str = buf;
char *token[3];
@@ -264,17 +267,36 @@ static int __init phram_setup(const char *val)
return ret;
}
-static int __init phram_param_call(const char *val, struct kernel_param *kp)
+static int phram_param_call(const char *val, struct kernel_param *kp)
{
+#ifdef MODULE
+ return phram_setup(val);
+#else
/*
- * This function is always called before 'init_phram()', whether
- * built-in or module.
+ * If more parameters are later passed in via
+ * /sys/module/phram/parameters/phram
+ * and init_phram() has already been called,
+ * we can parse the argument now.
*/
+
+ if (phram_init_called)
+ return phram_setup(val);
+
+ /*
+ * During early boot stage, we only save the parameters
+ * here. We must parse them later: if the param passed
+ * from kernel boot command line, phram_param_call() is
+ * called so early that it is not possible to resolve
+ * the device (even kmalloc() fails). Defer that work to
+ * phram_setup().
+ */
+
if (strlen(val) >= sizeof(phram_paramline))
return -ENOSPC;
strcpy(phram_paramline, val);
return 0;
+#endif
}
module_param_call(phram, phram_param_call, NULL, NULL, 000);
@@ -283,10 +305,15 @@ MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\"
static int __init init_phram(void)
{
+ int ret = 0;
+
+#ifndef MODULE
if (phram_paramline[0])
- return phram_setup(phram_paramline);
+ ret = phram_setup(phram_paramline);
+ phram_init_called = 1;
+#endif
- return 0;
+ return ret;
}
static void __exit cleanup_phram(void)
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index 0c51b988e1f..f02603e1bfe 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -725,16 +725,11 @@ static int __init init_pmc551(void)
}
mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
- if (!mtd) {
- printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
- "device.\n");
+ if (!mtd)
break;
- }
priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL);
if (!priv) {
- printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
- "device.\n");
kfree(mtd);
break;
}
diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h
new file mode 100644
index 00000000000..4f0c2c7c898
--- /dev/null
+++ b/drivers/mtd/devices/serial_flash_cmds.h
@@ -0,0 +1,81 @@
+/*
+ * Generic/SFDP Flash Commands and Device Capabilities
+ *
+ * Copyright (C) 2013 Lee Jones <lee.jones@lianro.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MTD_SERIAL_FLASH_CMDS_H
+#define _MTD_SERIAL_FLASH_CMDS_H
+
+/* Generic Flash Commands/OPCODEs */
+#define FLASH_CMD_WREN 0x06
+#define FLASH_CMD_WRDI 0x04
+#define FLASH_CMD_RDID 0x9f
+#define FLASH_CMD_RDSR 0x05
+#define FLASH_CMD_RDSR2 0x35
+#define FLASH_CMD_WRSR 0x01
+#define FLASH_CMD_SE_4K 0x20
+#define FLASH_CMD_SE_32K 0x52
+#define FLASH_CMD_SE 0xd8
+#define FLASH_CMD_CHIPERASE 0xc7
+#define FLASH_CMD_WRVCR 0x81
+#define FLASH_CMD_RDVCR 0x85
+
+/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
+#define FLASH_CMD_READ 0x03 /* READ */
+#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */
+#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */
+#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */
+#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */
+#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */
+
+#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */
+#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
+#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
+
+#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */
+#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */
+
+/* READ commands with 32-bit addressing */
+#define FLASH_CMD_READ4 0x13
+#define FLASH_CMD_READ4_FAST 0x0c
+#define FLASH_CMD_READ4_1_1_2 0x3c
+#define FLASH_CMD_READ4_1_2_2 0xbc
+#define FLASH_CMD_READ4_1_1_4 0x6c
+#define FLASH_CMD_READ4_1_4_4 0xec
+
+/* Configuration flags */
+#define FLASH_FLAG_SINGLE 0x000000ff
+#define FLASH_FLAG_READ_WRITE 0x00000001
+#define FLASH_FLAG_READ_FAST 0x00000002
+#define FLASH_FLAG_SE_4K 0x00000004
+#define FLASH_FLAG_SE_32K 0x00000008
+#define FLASH_FLAG_CE 0x00000010
+#define FLASH_FLAG_32BIT_ADDR 0x00000020
+#define FLASH_FLAG_RESET 0x00000040
+#define FLASH_FLAG_DYB_LOCKING 0x00000080
+
+#define FLASH_FLAG_DUAL 0x0000ff00
+#define FLASH_FLAG_READ_1_1_2 0x00000100
+#define FLASH_FLAG_READ_1_2_2 0x00000200
+#define FLASH_FLAG_READ_2_2_2 0x00000400
+#define FLASH_FLAG_WRITE_1_1_2 0x00001000
+#define FLASH_FLAG_WRITE_1_2_2 0x00002000
+#define FLASH_FLAG_WRITE_2_2_2 0x00004000
+
+#define FLASH_FLAG_QUAD 0x00ff0000
+#define FLASH_FLAG_READ_1_1_4 0x00010000
+#define FLASH_FLAG_READ_1_4_4 0x00020000
+#define FLASH_FLAG_READ_4_4_4 0x00040000
+#define FLASH_FLAG_WRITE_1_1_4 0x00100000
+#define FLASH_FLAG_WRITE_1_4_4 0x00200000
+#define FLASH_FLAG_WRITE_4_4_4 0x00400000
+
+#endif /* _MTD_SERIAL_FLASH_CMDS_H */
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 42382141206..363da96e689 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -913,7 +913,6 @@ static int spear_smi_probe(struct platform_device *pdev)
if (np) {
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
- pr_err("%s: ERROR: no memory", __func__);
ret = -ENOMEM;
goto err;
}
@@ -943,7 +942,6 @@ static int spear_smi_probe(struct platform_device *pdev)
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_ATOMIC);
if (!dev) {
ret = -ENOMEM;
- dev_err(&pdev->dev, "mem alloc fail\n");
goto err;
}
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index 687bf27ec85..c63ecbcad0b 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -15,7 +15,6 @@
*
*/
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/mutex.h>
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
new file mode 100644
index 00000000000..1957d7c8e18
--- /dev/null
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -0,0 +1,2108 @@
+/*
+ * st_spi_fsm.c - ST Fast Sequence Mode (FSM) Serial Flash Controller
+ *
+ * Author: Angus Clark <angus.clark@st.com>
+ *
+ * Copyright (C) 2010-2014 STMicroelectronics Limited
+ *
+ * JEDEC probe based on drivers/mtd/devices/m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include "serial_flash_cmds.h"
+
+/*
+ * FSM SPI Controller Registers
+ */
+#define SPI_CLOCKDIV 0x0010
+#define SPI_MODESELECT 0x0018
+#define SPI_CONFIGDATA 0x0020
+#define SPI_STA_MODE_CHANGE 0x0028
+#define SPI_FAST_SEQ_TRANSFER_SIZE 0x0100
+#define SPI_FAST_SEQ_ADD1 0x0104
+#define SPI_FAST_SEQ_ADD2 0x0108
+#define SPI_FAST_SEQ_ADD_CFG 0x010c
+#define SPI_FAST_SEQ_OPC1 0x0110
+#define SPI_FAST_SEQ_OPC2 0x0114
+#define SPI_FAST_SEQ_OPC3 0x0118
+#define SPI_FAST_SEQ_OPC4 0x011c
+#define SPI_FAST_SEQ_OPC5 0x0120
+#define SPI_MODE_BITS 0x0124
+#define SPI_DUMMY_BITS 0x0128
+#define SPI_FAST_SEQ_FLASH_STA_DATA 0x012c
+#define SPI_FAST_SEQ_1 0x0130
+#define SPI_FAST_SEQ_2 0x0134
+#define SPI_FAST_SEQ_3 0x0138
+#define SPI_FAST_SEQ_4 0x013c
+#define SPI_FAST_SEQ_CFG 0x0140
+#define SPI_FAST_SEQ_STA 0x0144
+#define SPI_QUAD_BOOT_SEQ_INIT_1 0x0148
+#define SPI_QUAD_BOOT_SEQ_INIT_2 0x014c
+#define SPI_QUAD_BOOT_READ_SEQ_1 0x0150
+#define SPI_QUAD_BOOT_READ_SEQ_2 0x0154
+#define SPI_PROGRAM_ERASE_TIME 0x0158
+#define SPI_MULT_PAGE_REPEAT_SEQ_1 0x015c
+#define SPI_MULT_PAGE_REPEAT_SEQ_2 0x0160
+#define SPI_STATUS_WR_TIME_REG 0x0164
+#define SPI_FAST_SEQ_DATA_REG 0x0300
+
+/*
+ * Register: SPI_MODESELECT
+ */
+#define SPI_MODESELECT_CONTIG 0x01
+#define SPI_MODESELECT_FASTREAD 0x02
+#define SPI_MODESELECT_DUALIO 0x04
+#define SPI_MODESELECT_FSM 0x08
+#define SPI_MODESELECT_QUADBOOT 0x10
+
+/*
+ * Register: SPI_CONFIGDATA
+ */
+#define SPI_CFG_DEVICE_ST 0x1
+#define SPI_CFG_DEVICE_ATMEL 0x4
+#define SPI_CFG_MIN_CS_HIGH(x) (((x) & 0xfff) << 4)
+#define SPI_CFG_CS_SETUPHOLD(x) (((x) & 0xff) << 16)
+#define SPI_CFG_DATA_HOLD(x) (((x) & 0xff) << 24)
+
+#define SPI_CFG_DEFAULT_MIN_CS_HIGH SPI_CFG_MIN_CS_HIGH(0x0AA)
+#define SPI_CFG_DEFAULT_CS_SETUPHOLD SPI_CFG_CS_SETUPHOLD(0xA0)
+#define SPI_CFG_DEFAULT_DATA_HOLD SPI_CFG_DATA_HOLD(0x00)
+
+/*
+ * Register: SPI_FAST_SEQ_TRANSFER_SIZE
+ */
+#define TRANSFER_SIZE(x) ((x) * 8)
+
+/*
+ * Register: SPI_FAST_SEQ_ADD_CFG
+ */
+#define ADR_CFG_CYCLES_ADD1(x) ((x) << 0)
+#define ADR_CFG_PADS_1_ADD1 (0x0 << 6)
+#define ADR_CFG_PADS_2_ADD1 (0x1 << 6)
+#define ADR_CFG_PADS_4_ADD1 (0x3 << 6)
+#define ADR_CFG_CSDEASSERT_ADD1 (1 << 8)
+#define ADR_CFG_CYCLES_ADD2(x) ((x) << (0+16))
+#define ADR_CFG_PADS_1_ADD2 (0x0 << (6+16))
+#define ADR_CFG_PADS_2_ADD2 (0x1 << (6+16))
+#define ADR_CFG_PADS_4_ADD2 (0x3 << (6+16))
+#define ADR_CFG_CSDEASSERT_ADD2 (1 << (8+16))
+
+/*
+ * Register: SPI_FAST_SEQ_n
+ */
+#define SEQ_OPC_OPCODE(x) ((x) << 0)
+#define SEQ_OPC_CYCLES(x) ((x) << 8)
+#define SEQ_OPC_PADS_1 (0x0 << 14)
+#define SEQ_OPC_PADS_2 (0x1 << 14)
+#define SEQ_OPC_PADS_4 (0x3 << 14)
+#define SEQ_OPC_CSDEASSERT (1 << 16)
+
+/*
+ * Register: SPI_FAST_SEQ_CFG
+ */
+#define SEQ_CFG_STARTSEQ (1 << 0)
+#define SEQ_CFG_SWRESET (1 << 5)
+#define SEQ_CFG_CSDEASSERT (1 << 6)
+#define SEQ_CFG_READNOTWRITE (1 << 7)
+#define SEQ_CFG_ERASE (1 << 8)
+#define SEQ_CFG_PADS_1 (0x0 << 16)
+#define SEQ_CFG_PADS_2 (0x1 << 16)
+#define SEQ_CFG_PADS_4 (0x3 << 16)
+
+/*
+ * Register: SPI_MODE_BITS
+ */
+#define MODE_DATA(x) (x & 0xff)
+#define MODE_CYCLES(x) ((x & 0x3f) << 16)
+#define MODE_PADS_1 (0x0 << 22)
+#define MODE_PADS_2 (0x1 << 22)
+#define MODE_PADS_4 (0x3 << 22)
+#define DUMMY_CSDEASSERT (1 << 24)
+
+/*
+ * Register: SPI_DUMMY_BITS
+ */
+#define DUMMY_CYCLES(x) ((x & 0x3f) << 16)
+#define DUMMY_PADS_1 (0x0 << 22)
+#define DUMMY_PADS_2 (0x1 << 22)
+#define DUMMY_PADS_4 (0x3 << 22)
+#define DUMMY_CSDEASSERT (1 << 24)
+
+/*
+ * Register: SPI_FAST_SEQ_FLASH_STA_DATA
+ */
+#define STA_DATA_BYTE1(x) ((x & 0xff) << 0)
+#define STA_DATA_BYTE2(x) ((x & 0xff) << 8)
+#define STA_PADS_1 (0x0 << 16)
+#define STA_PADS_2 (0x1 << 16)
+#define STA_PADS_4 (0x3 << 16)
+#define STA_CSDEASSERT (0x1 << 20)
+#define STA_RDNOTWR (0x1 << 21)
+
+/*
+ * FSM SPI Instruction Opcodes
+ */
+#define STFSM_OPC_CMD 0x1
+#define STFSM_OPC_ADD 0x2
+#define STFSM_OPC_STA 0x3
+#define STFSM_OPC_MODE 0x4
+#define STFSM_OPC_DUMMY 0x5
+#define STFSM_OPC_DATA 0x6
+#define STFSM_OPC_WAIT 0x7
+#define STFSM_OPC_JUMP 0x8
+#define STFSM_OPC_GOTO 0x9
+#define STFSM_OPC_STOP 0xF
+
+/*
+ * FSM SPI Instructions (== opcode + operand).
+ */
+#define STFSM_INSTR(cmd, op) ((cmd) | ((op) << 4))
+
+#define STFSM_INST_CMD1 STFSM_INSTR(STFSM_OPC_CMD, 1)
+#define STFSM_INST_CMD2 STFSM_INSTR(STFSM_OPC_CMD, 2)
+#define STFSM_INST_CMD3 STFSM_INSTR(STFSM_OPC_CMD, 3)
+#define STFSM_INST_CMD4 STFSM_INSTR(STFSM_OPC_CMD, 4)
+#define STFSM_INST_CMD5 STFSM_INSTR(STFSM_OPC_CMD, 5)
+#define STFSM_INST_ADD1 STFSM_INSTR(STFSM_OPC_ADD, 1)
+#define STFSM_INST_ADD2 STFSM_INSTR(STFSM_OPC_ADD, 2)
+
+#define STFSM_INST_DATA_WRITE STFSM_INSTR(STFSM_OPC_DATA, 1)
+#define STFSM_INST_DATA_READ STFSM_INSTR(STFSM_OPC_DATA, 2)
+
+#define STFSM_INST_STA_RD1 STFSM_INSTR(STFSM_OPC_STA, 0x1)
+#define STFSM_INST_STA_WR1 STFSM_INSTR(STFSM_OPC_STA, 0x1)
+#define STFSM_INST_STA_RD2 STFSM_INSTR(STFSM_OPC_STA, 0x2)
+#define STFSM_INST_STA_WR1_2 STFSM_INSTR(STFSM_OPC_STA, 0x3)
+
+#define STFSM_INST_MODE STFSM_INSTR(STFSM_OPC_MODE, 0)
+#define STFSM_INST_DUMMY STFSM_INSTR(STFSM_OPC_DUMMY, 0)
+#define STFSM_INST_WAIT STFSM_INSTR(STFSM_OPC_WAIT, 0)
+#define STFSM_INST_STOP STFSM_INSTR(STFSM_OPC_STOP, 0)
+
+#define STFSM_DEFAULT_EMI_FREQ 100000000UL /* 100 MHz */
+#define STFSM_DEFAULT_WR_TIME (STFSM_DEFAULT_EMI_FREQ * (15/1000)) /* 15ms */
+
+#define STFSM_FLASH_SAFE_FREQ 10000000UL /* 10 MHz */
+
+#define STFSM_MAX_WAIT_SEQ_MS 1000 /* FSM execution time */
+
+/* Flash Commands */
+#define FLASH_CMD_WREN 0x06
+#define FLASH_CMD_WRDI 0x04
+#define FLASH_CMD_RDID 0x9f
+#define FLASH_CMD_RDSR 0x05
+#define FLASH_CMD_RDSR2 0x35
+#define FLASH_CMD_WRSR 0x01
+#define FLASH_CMD_SE_4K 0x20
+#define FLASH_CMD_SE_32K 0x52
+#define FLASH_CMD_SE 0xd8
+#define FLASH_CMD_CHIPERASE 0xc7
+#define FLASH_CMD_WRVCR 0x81
+#define FLASH_CMD_RDVCR 0x85
+
+#define FLASH_CMD_READ 0x03 /* READ */
+#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */
+#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */
+#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */
+#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */
+#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */
+
+#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */
+#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
+#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
+#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
+
+#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */
+#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */
+
+/* READ commands with 32-bit addressing (N25Q256 and S25FLxxxS) */
+#define FLASH_CMD_READ4 0x13
+#define FLASH_CMD_READ4_FAST 0x0c
+#define FLASH_CMD_READ4_1_1_2 0x3c
+#define FLASH_CMD_READ4_1_2_2 0xbc
+#define FLASH_CMD_READ4_1_1_4 0x6c
+#define FLASH_CMD_READ4_1_4_4 0xec
+
+/* S25FLxxxS commands */
+#define S25FL_CMD_WRITE4_1_1_4 0x34
+#define S25FL_CMD_SE4 0xdc
+#define S25FL_CMD_CLSR 0x30
+#define S25FL_CMD_DYBWR 0xe1
+#define S25FL_CMD_DYBRD 0xe0
+#define S25FL_CMD_WRITE4 0x12 /* Note, opcode clashes with
+ * 'FLASH_CMD_WRITE_1_4_4'
+ * as found on N25Qxxx devices! */
+
+/* Status register */
+#define FLASH_STATUS_BUSY 0x01
+#define FLASH_STATUS_WEL 0x02
+#define FLASH_STATUS_BP0 0x04
+#define FLASH_STATUS_BP1 0x08
+#define FLASH_STATUS_BP2 0x10
+#define FLASH_STATUS_SRWP0 0x80
+#define FLASH_STATUS_TIMEOUT 0xff
+/* S25FL Error Flags */
+#define S25FL_STATUS_E_ERR 0x20
+#define S25FL_STATUS_P_ERR 0x40
+
+#define FLASH_PAGESIZE 256 /* In Bytes */
+#define FLASH_PAGESIZE_32 (FLASH_PAGESIZE / 4) /* In uint32_t */
+#define FLASH_MAX_BUSY_WAIT (300 * HZ) /* Maximum 'CHIPERASE' time */
+
+/*
+ * Flags to tweak operation of default read/write/erase routines
+ */
+#define CFG_READ_TOGGLE_32BIT_ADDR 0x00000001
+#define CFG_WRITE_TOGGLE_32BIT_ADDR 0x00000002
+#define CFG_WRITE_EX_32BIT_ADDR_DELAY 0x00000004
+#define CFG_ERASESEC_TOGGLE_32BIT_ADDR 0x00000008
+#define CFG_S25FL_CHECK_ERROR_FLAGS 0x00000010
+
+struct stfsm_seq {
+ uint32_t data_size;
+ uint32_t addr1;
+ uint32_t addr2;
+ uint32_t addr_cfg;
+ uint32_t seq_opc[5];
+ uint32_t mode;
+ uint32_t dummy;
+ uint32_t status;
+ uint8_t seq[16];
+ uint32_t seq_cfg;
+} __packed __aligned(4);
+
+struct stfsm {
+ struct device *dev;
+ void __iomem *base;
+ struct resource *region;
+ struct mtd_info mtd;
+ struct mutex lock;
+ struct flash_info *info;
+
+ uint32_t configuration;
+ uint32_t fifo_dir_delay;
+ bool booted_from_spi;
+ bool reset_signal;
+ bool reset_por;
+
+ struct stfsm_seq stfsm_seq_read;
+ struct stfsm_seq stfsm_seq_write;
+ struct stfsm_seq stfsm_seq_en_32bit_addr;
+};
+
+/* Parameters to configure a READ or WRITE FSM sequence */
+struct seq_rw_config {
+ uint32_t flags; /* flags to support config */
+ uint8_t cmd; /* FLASH command */
+ int write; /* Write Sequence */
+ uint8_t addr_pads; /* No. of addr pads (MODE & DUMMY) */
+ uint8_t data_pads; /* No. of data pads */
+ uint8_t mode_data; /* MODE data */
+ uint8_t mode_cycles; /* No. of MODE cycles */
+ uint8_t dummy_cycles; /* No. of DUMMY cycles */
+};
+
+/* SPI Flash Device Table */
+struct flash_info {
+ char *name;
+ /*
+ * JEDEC id zero means "no ID" (most older chips); otherwise it has
+ * a high byte of zero plus three data bytes: the manufacturer id,
+ * then a two byte device id.
+ */
+ u32 jedec_id;
+ u16 ext_id;
+ /*
+ * The size listed here is what works with FLASH_CMD_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned sector_size;
+ u16 n_sectors;
+ u32 flags;
+ /*
+ * Note, where FAST_READ is supported, freq_max specifies the
+ * FAST_READ frequency, not the READ frequency.
+ */
+ u32 max_freq;
+ int (*config)(struct stfsm *);
+};
+
+static int stfsm_n25q_config(struct stfsm *fsm);
+static int stfsm_mx25_config(struct stfsm *fsm);
+static int stfsm_s25fl_config(struct stfsm *fsm);
+static int stfsm_w25q_config(struct stfsm *fsm);
+
+static struct flash_info flash_types[] = {
+ /*
+ * ST Microelectronics/Numonyx --
+ * (newer production versions may have feature updates
+ * (eg faster operating frequency)
+ */
+#define M25P_FLAG (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST)
+ { "m25p40", 0x202013, 0, 64 * 1024, 8, M25P_FLAG, 25, NULL },
+ { "m25p80", 0x202014, 0, 64 * 1024, 16, M25P_FLAG, 25, NULL },
+ { "m25p16", 0x202015, 0, 64 * 1024, 32, M25P_FLAG, 25, NULL },
+ { "m25p32", 0x202016, 0, 64 * 1024, 64, M25P_FLAG, 50, NULL },
+ { "m25p64", 0x202017, 0, 64 * 1024, 128, M25P_FLAG, 50, NULL },
+ { "m25p128", 0x202018, 0, 256 * 1024, 64, M25P_FLAG, 50, NULL },
+
+#define M25PX_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_WRITE_1_1_2)
+ { "m25px32", 0x207116, 0, 64 * 1024, 64, M25PX_FLAG, 75, NULL },
+ { "m25px64", 0x207117, 0, 64 * 1024, 128, M25PX_FLAG, 75, NULL },
+
+#define MX25_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_READ_1_2_2 | \
+ FLASH_FLAG_READ_1_1_4 | \
+ FLASH_FLAG_READ_1_4_4 | \
+ FLASH_FLAG_SE_4K | \
+ FLASH_FLAG_SE_32K)
+ { "mx25l25635e", 0xc22019, 0, 64*1024, 512,
+ (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70,
+ stfsm_mx25_config },
+
+#define N25Q_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_READ_1_2_2 | \
+ FLASH_FLAG_READ_1_1_4 | \
+ FLASH_FLAG_READ_1_4_4 | \
+ FLASH_FLAG_WRITE_1_1_2 | \
+ FLASH_FLAG_WRITE_1_2_2 | \
+ FLASH_FLAG_WRITE_1_1_4 | \
+ FLASH_FLAG_WRITE_1_4_4)
+ { "n25q128", 0x20ba18, 0, 64 * 1024, 256, N25Q_FLAG, 108,
+ stfsm_n25q_config },
+ { "n25q256", 0x20ba19, 0, 64 * 1024, 512,
+ N25Q_FLAG | FLASH_FLAG_32BIT_ADDR, 108, stfsm_n25q_config },
+
+ /*
+ * Spansion S25FLxxxP
+ * - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+ */
+#define S25FLXXXP_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_READ_1_2_2 | \
+ FLASH_FLAG_READ_1_1_4 | \
+ FLASH_FLAG_READ_1_4_4 | \
+ FLASH_FLAG_WRITE_1_1_4 | \
+ FLASH_FLAG_READ_FAST)
+ { "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, S25FLXXXP_FLAG, 80,
+ stfsm_s25fl_config },
+ { "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, S25FLXXXP_FLAG, 80,
+ stfsm_s25fl_config },
+
+ /*
+ * Spansion S25FLxxxS
+ * - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+ * - RESET# signal supported by die but not bristled out on all
+ * package types. The package type is a function of board design,
+ * so this information is captured in the board's flags.
+ * - Supports 'DYB' sector protection. Depending on variant, sectors
+ * may default to locked state on power-on.
+ */
+#define S25FLXXXS_FLAG (S25FLXXXP_FLAG | \
+ FLASH_FLAG_RESET | \
+ FLASH_FLAG_DYB_LOCKING)
+ { "s25fl128s0", 0x012018, 0x0300, 256 * 1024, 64, S25FLXXXS_FLAG, 80,
+ stfsm_s25fl_config },
+ { "s25fl128s1", 0x012018, 0x0301, 64 * 1024, 256, S25FLXXXS_FLAG, 80,
+ stfsm_s25fl_config },
+ { "s25fl256s0", 0x010219, 0x4d00, 256 * 1024, 128,
+ S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config },
+ { "s25fl256s1", 0x010219, 0x4d01, 64 * 1024, 512,
+ S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config },
+
+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+#define W25X_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_WRITE_1_1_2)
+ { "w25x40", 0xef3013, 0, 64 * 1024, 8, W25X_FLAG, 75, NULL },
+ { "w25x80", 0xef3014, 0, 64 * 1024, 16, W25X_FLAG, 75, NULL },
+ { "w25x16", 0xef3015, 0, 64 * 1024, 32, W25X_FLAG, 75, NULL },
+ { "w25x32", 0xef3016, 0, 64 * 1024, 64, W25X_FLAG, 75, NULL },
+ { "w25x64", 0xef3017, 0, 64 * 1024, 128, W25X_FLAG, 75, NULL },
+
+ /* Winbond -- w25q "blocks" are 64K, "sectors" are 4KiB */
+#define W25Q_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_READ_1_2_2 | \
+ FLASH_FLAG_READ_1_1_4 | \
+ FLASH_FLAG_READ_1_4_4 | \
+ FLASH_FLAG_WRITE_1_1_4)
+ { "w25q80", 0xef4014, 0, 64 * 1024, 16, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q16", 0xef4015, 0, 64 * 1024, 32, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q32", 0xef4016, 0, 64 * 1024, 64, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q64", 0xef4017, 0, 64 * 1024, 128, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+
+ /* Sentinel */
+ { NULL, 0x000000, 0, 0, 0, 0, 0, NULL },
+};
+
+/*
+ * FSM message sequence configurations:
+ *
+ * All configs are presented in order of preference
+ */
+
+/* Default READ configurations, in order of preference */
+static struct seq_rw_config default_read_configs[] = {
+ {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4, 0, 4, 4, 0x00, 2, 4},
+ {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4, 0, 1, 4, 0x00, 4, 0},
+ {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2, 0, 2, 2, 0x00, 4, 0},
+ {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, FLASH_CMD_READ_FAST, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/* Default WRITE configurations */
+static struct seq_rw_config default_write_configs[] = {
+ {FLASH_FLAG_WRITE_1_4_4, FLASH_CMD_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0},
+ {FLASH_FLAG_WRITE_1_1_4, FLASH_CMD_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0},
+ {FLASH_FLAG_WRITE_1_2_2, FLASH_CMD_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0},
+ {FLASH_FLAG_WRITE_1_1_2, FLASH_CMD_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0},
+ {FLASH_FLAG_READ_WRITE, FLASH_CMD_WRITE, 1, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [N25Qxxx] Configuration
+ */
+#define N25Q_VCR_DUMMY_CYCLES(x) (((x) & 0xf) << 4)
+#define N25Q_VCR_XIP_DISABLED ((uint8_t)0x1 << 3)
+#define N25Q_VCR_WRAP_CONT 0x3
+
+/* N25Q 3-byte Address READ configurations
+ * - 'FAST' variants configured for 8 dummy cycles.
+ *
+ * Note, the number of dummy cycles used for 'FAST' READ operations is
+ * configurable and would normally be tuned according to the READ command and
+ * operating frequency. However, this applies universally to all 'FAST' READ
+ * commands, including those used by the SPIBoot controller, and remains in
+ * force until the device is power-cycled. Since the SPIBoot controller is
+ * hard-wired to use 8 dummy cycles, we must configure the device to also use 8
+ * cycles.
+ */
+static struct seq_rw_config n25q_read3_configs[] = {
+ {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4, 0, 4, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4, 0, 1, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2, 0, 2, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, FLASH_CMD_READ_FAST, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/* N25Q 4-byte Address READ configurations
+ * - use special 4-byte address READ commands (reduces overheads, and
+ * reduces risk of hitting watchdog reset issues).
+ * - 'FAST' variants configured for 8 dummy cycles (see note above.)
+ */
+static struct seq_rw_config n25q_read4_configs[] = {
+ {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, FLASH_CMD_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [MX25xxx] Configuration
+ */
+#define MX25_STATUS_QE (0x1 << 6)
+
+static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
+{
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR) |
+ SEQ_OPC_CSDEASSERT);
+
+ seq->seq[0] = STFSM_INST_CMD1;
+ seq->seq[1] = STFSM_INST_WAIT;
+ seq->seq[2] = STFSM_INST_STOP;
+
+ seq->seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_ERASE |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ);
+
+ return 0;
+}
+
+/*
+ * [S25FLxxx] Configuration
+ */
+#define STFSM_S25FL_CONFIG_QE (0x1 << 1)
+
+/*
+ * S25FLxxxS devices provide three ways of supporting 32-bit addressing: Bank
+ * Register, Extended Address Modes, and a 32-bit address command set. The
+ * 32-bit address command set is used here, since it avoids any problems with
+ * entering a state that is incompatible with the SPIBoot Controller.
+ */
+static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
+ {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4},
+ {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0},
+ {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, FLASH_CMD_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
+ {FLASH_FLAG_WRITE_1_1_4, S25FL_CMD_WRITE4_1_1_4, 1, 1, 4, 0x00, 0, 0},
+ {FLASH_FLAG_READ_WRITE, S25FL_CMD_WRITE4, 1, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [W25Qxxx] Configuration
+ */
+#define W25Q_STATUS_QE (0x1 << 9)
+
+static struct stfsm_seq stfsm_seq_read_jedec = {
+ .data_size = TRANSFER_SIZE(8),
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_RDID)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_DATA_READ,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_read_status_fifo = {
+ .data_size = TRANSFER_SIZE(4),
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_RDSR)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_DATA_READ,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_erase_sector = {
+ /* 'addr_cfg' configured during initialisation */
+ .seq_opc = {
+ (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+
+ (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_SE)),
+ },
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_ADD1,
+ STFSM_INST_ADD2,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_erase_chip = {
+ .seq_opc = {
+ (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+
+ (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_CHIPERASE) | SEQ_OPC_CSDEASSERT),
+ },
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_WAIT,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_ERASE |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_write_status = {
+ .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+ .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WRSR)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_STA_WR1,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_wrvcr = {
+ .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+ .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WRVCR)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_STA_WR1,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq)
+{
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR));
+ seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
+ SEQ_OPC_CSDEASSERT);
+
+ seq->seq[0] = STFSM_INST_CMD2;
+ seq->seq[1] = STFSM_INST_CMD1;
+ seq->seq[2] = STFSM_INST_WAIT;
+ seq->seq[3] = STFSM_INST_STOP;
+
+ seq->seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_ERASE |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ);
+
+ return 0;
+}
+
+static inline int stfsm_is_idle(struct stfsm *fsm)
+{
+ return readl(fsm->base + SPI_FAST_SEQ_STA) & 0x10;
+}
+
+static inline uint32_t stfsm_fifo_available(struct stfsm *fsm)
+{
+ return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f;
+}
+
+static void stfsm_clear_fifo(struct stfsm *fsm)
+{
+ uint32_t avail;
+
+ for (;;) {
+ avail = stfsm_fifo_available(fsm);
+ if (!avail)
+ break;
+
+ while (avail) {
+ readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
+ avail--;
+ }
+ }
+}
+
+static inline void stfsm_load_seq(struct stfsm *fsm,
+ const struct stfsm_seq *seq)
+{
+ void __iomem *dst = fsm->base + SPI_FAST_SEQ_TRANSFER_SIZE;
+ const uint32_t *src = (const uint32_t *)seq;
+ int words = sizeof(*seq) / sizeof(*src);
+
+ BUG_ON(!stfsm_is_idle(fsm));
+
+ while (words--) {
+ writel(*src, dst);
+ src++;
+ dst += 4;
+ }
+}
+
+static void stfsm_wait_seq(struct stfsm *fsm)
+{
+ unsigned long deadline;
+ int timeout = 0;
+
+ deadline = jiffies + msecs_to_jiffies(STFSM_MAX_WAIT_SEQ_MS);
+
+ while (!timeout) {
+ if (time_after_eq(jiffies, deadline))
+ timeout = 1;
+
+ if (stfsm_is_idle(fsm))
+ return;
+
+ cond_resched();
+ }
+
+ dev_err(fsm->dev, "timeout on sequence completion\n");
+}
+
+static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size)
+{
+ uint32_t remaining = size >> 2;
+ uint32_t avail;
+ uint32_t words;
+
+ dev_dbg(fsm->dev, "Reading %d bytes from FIFO\n", size);
+
+ BUG_ON((((uint32_t)buf) & 0x3) || (size & 0x3));
+
+ while (remaining) {
+ for (;;) {
+ avail = stfsm_fifo_available(fsm);
+ if (avail)
+ break;
+ udelay(1);
+ }
+ words = min(avail, remaining);
+ remaining -= words;
+
+ readsl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words);
+ buf += words;
+ }
+}
+
+static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf,
+ uint32_t size)
+{
+ uint32_t words = size >> 2;
+
+ dev_dbg(fsm->dev, "writing %d bytes to FIFO\n", size);
+
+ BUG_ON((((uint32_t)buf) & 0x3) || (size & 0x3));
+
+ writesl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words);
+
+ return size;
+}
+
+static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter)
+{
+ struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr;
+ uint32_t cmd = enter ? FLASH_CMD_EN4B_ADDR : FLASH_CMD_EX4B_ADDR;
+
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(cmd) |
+ SEQ_OPC_CSDEASSERT);
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+}
+
+static uint8_t stfsm_wait_busy(struct stfsm *fsm)
+{
+ struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+ unsigned long deadline;
+ uint32_t status;
+ int timeout = 0;
+
+ /* Use RDRS1 */
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_RDSR));
+
+ /* Load read_status sequence */
+ stfsm_load_seq(fsm, seq);
+
+ /*
+ * Repeat until busy bit is deasserted, or timeout, or error (S25FLxxxS)
+ */
+ deadline = jiffies + FLASH_MAX_BUSY_WAIT;
+ while (!timeout) {
+ if (time_after_eq(jiffies, deadline))
+ timeout = 1;
+
+ stfsm_wait_seq(fsm);
+
+ stfsm_read_fifo(fsm, &status, 4);
+
+ if ((status & FLASH_STATUS_BUSY) == 0)
+ return 0;
+
+ if ((fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS) &&
+ ((status & S25FL_STATUS_P_ERR) ||
+ (status & S25FL_STATUS_E_ERR)))
+ return (uint8_t)(status & 0xff);
+
+ if (!timeout)
+ /* Restart */
+ writel(seq->seq_cfg, fsm->base + SPI_FAST_SEQ_CFG);
+
+ cond_resched();
+ }
+
+ dev_err(fsm->dev, "timeout on wait_busy\n");
+
+ return FLASH_STATUS_TIMEOUT;
+}
+
+static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd,
+ uint8_t *status)
+{
+ struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+ uint32_t tmp;
+
+ dev_dbg(fsm->dev, "reading STA[%s]\n",
+ (cmd == FLASH_CMD_RDSR) ? "1" : "2");
+
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(cmd)),
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_read_fifo(fsm, &tmp, 4);
+
+ *status = (uint8_t)(tmp >> 24);
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+}
+
+static int stfsm_write_status(struct stfsm *fsm, uint16_t status,
+ int sta_bytes)
+{
+ struct stfsm_seq *seq = &stfsm_seq_write_status;
+
+ dev_dbg(fsm->dev, "writing STA[%s] 0x%04x\n",
+ (sta_bytes == 1) ? "1" : "1+2", status);
+
+ seq->status = (uint32_t)status | STA_PADS_1 | STA_CSDEASSERT;
+ seq->seq[2] = (sta_bytes == 1) ?
+ STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2;
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+};
+
+static int stfsm_wrvcr(struct stfsm *fsm, uint8_t data)
+{
+ struct stfsm_seq *seq = &stfsm_seq_wrvcr;
+
+ dev_dbg(fsm->dev, "writing VCR 0x%02x\n", data);
+
+ seq->status = (STA_DATA_BYTE1(data) | STA_PADS_1 | STA_CSDEASSERT);
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+}
+
+/*
+ * SoC reset on 'boot-from-spi' systems
+ *
+ * Certain modes of operation cause the Flash device to enter a particular state
+ * for a period of time (e.g. 'Erase Sector', 'Quad Enable', and 'Enter 32-bit
+ * Addr' commands). On boot-from-spi systems, it is important to consider what
+ * happens if a warm reset occurs during this period. The SPIBoot controller
+ * assumes that Flash device is in its default reset state, 24-bit address mode,
+ * and ready to accept commands. This can be achieved using some form of
+ * on-board logic/controller to force a device POR in response to a SoC-level
+ * reset or by making use of the device reset signal if available (limited
+ * number of devices only).
+ *
+ * Failure to take such precautions can cause problems following a warm reset.
+ * For some operations (e.g. ERASE), there is little that can be done. For
+ * other modes of operation (e.g. 32-bit addressing), options are often
+ * available that can help minimise the window in which a reset could cause a
+ * problem.
+ *
+ */
+static bool stfsm_can_handle_soc_reset(struct stfsm *fsm)
+{
+ /* Reset signal is available on the board and supported by the device */
+ if (fsm->reset_signal && fsm->info->flags & FLASH_FLAG_RESET)
+ return true;
+
+ /* Board-level logic forces a power-on-reset */
+ if (fsm->reset_por)
+ return true;
+
+ /* Reset is not properly handled and may result in failure to reboot */
+ return false;
+}
+
+/* Configure 'addr_cfg' according to addressing mode */
+static void stfsm_prepare_erasesec_seq(struct stfsm *fsm,
+ struct stfsm_seq *seq)
+{
+ int addr1_cycles = fsm->info->flags & FLASH_FLAG_32BIT_ADDR ? 16 : 8;
+
+ seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(addr1_cycles) |
+ ADR_CFG_PADS_1_ADD1 |
+ ADR_CFG_CYCLES_ADD2(16) |
+ ADR_CFG_PADS_1_ADD2 |
+ ADR_CFG_CSDEASSERT_ADD2);
+}
+
+/* Search for preferred configuration based on available flags */
+static struct seq_rw_config *
+stfsm_search_seq_rw_configs(struct stfsm *fsm,
+ struct seq_rw_config cfgs[])
+{
+ struct seq_rw_config *config;
+ int flags = fsm->info->flags;
+
+ for (config = cfgs; config->cmd != 0; config++)
+ if ((config->flags & flags) == config->flags)
+ return config;
+
+ return NULL;
+}
+
+/* Prepare a READ/WRITE sequence according to configuration parameters */
+static void stfsm_prepare_rw_seq(struct stfsm *fsm,
+ struct stfsm_seq *seq,
+ struct seq_rw_config *cfg)
+{
+ int addr1_cycles, addr2_cycles;
+ int i = 0;
+
+ memset(seq, 0, sizeof(*seq));
+
+ /* Add READ/WRITE OPC */
+ seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(cfg->cmd));
+
+ /* Add WREN OPC for a WRITE sequence */
+ if (cfg->write)
+ seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
+ SEQ_OPC_CSDEASSERT);
+
+ /* Address configuration (24 or 32-bit addresses) */
+ addr1_cycles = (fsm->info->flags & FLASH_FLAG_32BIT_ADDR) ? 16 : 8;
+ addr1_cycles /= cfg->addr_pads;
+ addr2_cycles = 16 / cfg->addr_pads;
+ seq->addr_cfg = ((addr1_cycles & 0x3f) << 0 | /* ADD1 cycles */
+ (cfg->addr_pads - 1) << 6 | /* ADD1 pads */
+ (addr2_cycles & 0x3f) << 16 | /* ADD2 cycles */
+ ((cfg->addr_pads - 1) << 22)); /* ADD2 pads */
+
+ /* Data/Sequence configuration */
+ seq->seq_cfg = ((cfg->data_pads - 1) << 16 |
+ SEQ_CFG_STARTSEQ |
+ SEQ_CFG_CSDEASSERT);
+ if (!cfg->write)
+ seq->seq_cfg |= SEQ_CFG_READNOTWRITE;
+
+ /* Mode configuration (no. of pads taken from addr cfg) */
+ seq->mode = ((cfg->mode_data & 0xff) << 0 | /* data */
+ (cfg->mode_cycles & 0x3f) << 16 | /* cycles */
+ (cfg->addr_pads - 1) << 22); /* pads */
+
+ /* Dummy configuration (no. of pads taken from addr cfg) */
+ seq->dummy = ((cfg->dummy_cycles & 0x3f) << 16 | /* cycles */
+ (cfg->addr_pads - 1) << 22); /* pads */
+
+
+ /* Instruction sequence */
+ i = 0;
+ if (cfg->write)
+ seq->seq[i++] = STFSM_INST_CMD2;
+
+ seq->seq[i++] = STFSM_INST_CMD1;
+
+ seq->seq[i++] = STFSM_INST_ADD1;
+ seq->seq[i++] = STFSM_INST_ADD2;
+
+ if (cfg->mode_cycles)
+ seq->seq[i++] = STFSM_INST_MODE;
+
+ if (cfg->dummy_cycles)
+ seq->seq[i++] = STFSM_INST_DUMMY;
+
+ seq->seq[i++] =
+ cfg->write ? STFSM_INST_DATA_WRITE : STFSM_INST_DATA_READ;
+ seq->seq[i++] = STFSM_INST_STOP;
+}
+
+static int stfsm_search_prepare_rw_seq(struct stfsm *fsm,
+ struct stfsm_seq *seq,
+ struct seq_rw_config *cfgs)
+{
+ struct seq_rw_config *config;
+
+ config = stfsm_search_seq_rw_configs(fsm, cfgs);
+ if (!config) {
+ dev_err(fsm->dev, "failed to find suitable config\n");
+ return -EINVAL;
+ }
+
+ stfsm_prepare_rw_seq(fsm, seq, config);
+
+ return 0;
+}
+
+/* Prepare a READ/WRITE/ERASE 'default' sequences */
+static int stfsm_prepare_rwe_seqs_default(struct stfsm *fsm)
+{
+ uint32_t flags = fsm->info->flags;
+ int ret;
+
+ /* Configure 'READ' sequence */
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+ default_read_configs);
+ if (ret) {
+ dev_err(fsm->dev,
+ "failed to prep READ sequence with flags [0x%08x]\n",
+ flags);
+ return ret;
+ }
+
+ /* Configure 'WRITE' sequence */
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+ default_write_configs);
+ if (ret) {
+ dev_err(fsm->dev,
+ "failed to prep WRITE sequence with flags [0x%08x]\n",
+ flags);
+ return ret;
+ }
+
+ /* Configure 'ERASE_SECTOR' sequence */
+ stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector);
+
+ return 0;
+}
+
+static int stfsm_mx25_config(struct stfsm *fsm)
+{
+ uint32_t flags = fsm->info->flags;
+ uint32_t data_pads;
+ uint8_t sta;
+ int ret;
+ bool soc_reset;
+
+ /*
+ * Use default READ/WRITE sequences
+ */
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure 32-bit Address Support
+ */
+ if (flags & FLASH_FLAG_32BIT_ADDR) {
+ /* Configure 'enter_32bitaddr' FSM sequence */
+ stfsm_mx25_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr);
+
+ soc_reset = stfsm_can_handle_soc_reset(fsm);
+ if (soc_reset || !fsm->booted_from_spi) {
+ /* If we can handle SoC resets, we enable 32-bit address
+ * mode pervasively */
+ stfsm_enter_32bit_addr(fsm, 1);
+
+ } else {
+ /* Else, enable/disable 32-bit addressing before/after
+ * each operation */
+ fsm->configuration = (CFG_READ_TOGGLE_32BIT_ADDR |
+ CFG_WRITE_TOGGLE_32BIT_ADDR |
+ CFG_ERASESEC_TOGGLE_32BIT_ADDR);
+ /* It seems a small delay is required after exiting
+ * 32-bit mode following a write operation. The issue
+ * is under investigation.
+ */
+ fsm->configuration |= CFG_WRITE_EX_32BIT_ADDR_DELAY;
+ }
+ }
+
+ /* For QUAD mode, set 'QE' STATUS bit */
+ data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+ if (data_pads == 4) {
+ stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta);
+ sta |= MX25_STATUS_QE;
+ stfsm_write_status(fsm, sta, 1);
+ }
+
+ return 0;
+}
+
+static int stfsm_n25q_config(struct stfsm *fsm)
+{
+ uint32_t flags = fsm->info->flags;
+ uint8_t vcr;
+ int ret = 0;
+ bool soc_reset;
+
+ /* Configure 'READ' sequence */
+ if (flags & FLASH_FLAG_32BIT_ADDR)
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+ n25q_read4_configs);
+ else
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+ n25q_read3_configs);
+ if (ret) {
+ dev_err(fsm->dev,
+ "failed to prepare READ sequence with flags [0x%08x]\n",
+ flags);
+ return ret;
+ }
+
+ /* Configure 'WRITE' sequence (default configs) */
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+ default_write_configs);
+ if (ret) {
+ dev_err(fsm->dev,
+ "preparing WRITE sequence using flags [0x%08x] failed\n",
+ flags);
+ return ret;
+ }
+
+ /* * Configure 'ERASE_SECTOR' sequence */
+ stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector);
+
+ /* Configure 32-bit address support */
+ if (flags & FLASH_FLAG_32BIT_ADDR) {
+ stfsm_n25q_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr);
+
+ soc_reset = stfsm_can_handle_soc_reset(fsm);
+ if (soc_reset || !fsm->booted_from_spi) {
+ /*
+ * If we can handle SoC resets, we enable 32-bit
+ * address mode pervasively
+ */
+ stfsm_enter_32bit_addr(fsm, 1);
+ } else {
+ /*
+ * If not, enable/disable for WRITE and ERASE
+ * operations (READ uses special commands)
+ */
+ fsm->configuration = (CFG_WRITE_TOGGLE_32BIT_ADDR |
+ CFG_ERASESEC_TOGGLE_32BIT_ADDR);
+ }
+ }
+
+ /*
+ * Configure device to use 8 dummy cycles
+ */
+ vcr = (N25Q_VCR_DUMMY_CYCLES(8) | N25Q_VCR_XIP_DISABLED |
+ N25Q_VCR_WRAP_CONT);
+ stfsm_wrvcr(fsm, vcr);
+
+ return 0;
+}
+
+static void stfsm_s25fl_prepare_erasesec_seq_32(struct stfsm_seq *seq)
+{
+ seq->seq_opc[1] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(S25FL_CMD_SE4));
+
+ seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+ ADR_CFG_PADS_1_ADD1 |
+ ADR_CFG_CYCLES_ADD2(16) |
+ ADR_CFG_PADS_1_ADD2 |
+ ADR_CFG_CSDEASSERT_ADD2);
+}
+
+static void stfsm_s25fl_read_dyb(struct stfsm *fsm, uint32_t offs, uint8_t *dby)
+{
+ uint32_t tmp;
+ struct stfsm_seq seq = {
+ .data_size = TRANSFER_SIZE(4),
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(S25FL_CMD_DYBRD)),
+ .addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+ ADR_CFG_PADS_1_ADD1 |
+ ADR_CFG_CYCLES_ADD2(16) |
+ ADR_CFG_PADS_1_ADD2),
+ .addr1 = (offs >> 16) & 0xffff,
+ .addr2 = offs & 0xffff,
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_ADD1,
+ STFSM_INST_ADD2,
+ STFSM_INST_DATA_READ,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+ };
+
+ stfsm_load_seq(fsm, &seq);
+
+ stfsm_read_fifo(fsm, &tmp, 4);
+
+ *dby = (uint8_t)(tmp >> 24);
+
+ stfsm_wait_seq(fsm);
+}
+
+static void stfsm_s25fl_write_dyb(struct stfsm *fsm, uint32_t offs, uint8_t dby)
+{
+ struct stfsm_seq seq = {
+ .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
+ SEQ_OPC_CSDEASSERT),
+ .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(S25FL_CMD_DYBWR)),
+ .addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+ ADR_CFG_PADS_1_ADD1 |
+ ADR_CFG_CYCLES_ADD2(16) |
+ ADR_CFG_PADS_1_ADD2),
+ .status = (uint32_t)dby | STA_PADS_1 | STA_CSDEASSERT,
+ .addr1 = (offs >> 16) & 0xffff,
+ .addr2 = offs & 0xffff,
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_ADD1,
+ STFSM_INST_ADD2,
+ STFSM_INST_STA_WR1,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+ };
+
+ stfsm_load_seq(fsm, &seq);
+ stfsm_wait_seq(fsm);
+
+ stfsm_wait_busy(fsm);
+}
+
+static int stfsm_s25fl_clear_status_reg(struct stfsm *fsm)
+{
+ struct stfsm_seq seq = {
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(S25FL_CMD_CLSR) |
+ SEQ_OPC_CSDEASSERT),
+ .seq_opc[1] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WRDI) |
+ SEQ_OPC_CSDEASSERT),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_WAIT,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_ERASE |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+ };
+
+ stfsm_load_seq(fsm, &seq);
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+}
+
+static int stfsm_s25fl_config(struct stfsm *fsm)
+{
+ struct flash_info *info = fsm->info;
+ uint32_t flags = info->flags;
+ uint32_t data_pads;
+ uint32_t offs;
+ uint16_t sta_wr;
+ uint8_t sr1, cr1, dyb;
+ int ret;
+
+ if (flags & FLASH_FLAG_32BIT_ADDR) {
+ /*
+ * Prepare Read/Write/Erase sequences according to S25FLxxx
+ * 32-bit address command set
+ */
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+ stfsm_s25fl_read4_configs);
+ if (ret)
+ return ret;
+
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+ stfsm_s25fl_write4_configs);
+ if (ret)
+ return ret;
+
+ stfsm_s25fl_prepare_erasesec_seq_32(&stfsm_seq_erase_sector);
+
+ } else {
+ /* Use default configurations for 24-bit addressing */
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * For devices that support 'DYB' sector locking, check lock status and
+ * unlock sectors if necessary (some variants power-on with sectors
+ * locked by default)
+ */
+ if (flags & FLASH_FLAG_DYB_LOCKING) {
+ offs = 0;
+ for (offs = 0; offs < info->sector_size * info->n_sectors;) {
+ stfsm_s25fl_read_dyb(fsm, offs, &dyb);
+ if (dyb == 0x00)
+ stfsm_s25fl_write_dyb(fsm, offs, 0xff);
+
+ /* Handle bottom/top 4KiB parameter sectors */
+ if ((offs < info->sector_size * 2) ||
+ (offs >= (info->sector_size - info->n_sectors * 4)))
+ offs += 0x1000;
+ else
+ offs += 0x10000;
+ }
+ }
+
+ /* Check status of 'QE' bit */
+ data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+ stfsm_read_status(fsm, FLASH_CMD_RDSR2, &cr1);
+ if (data_pads == 4) {
+ if (!(cr1 & STFSM_S25FL_CONFIG_QE)) {
+ /* Set 'QE' */
+ cr1 |= STFSM_S25FL_CONFIG_QE;
+
+ stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1);
+ sta_wr = ((uint16_t)cr1 << 8) | sr1;
+
+ stfsm_write_status(fsm, sta_wr, 2);
+
+ stfsm_wait_busy(fsm);
+ }
+ } else {
+ if ((cr1 & STFSM_S25FL_CONFIG_QE)) {
+ /* Clear 'QE' */
+ cr1 &= ~STFSM_S25FL_CONFIG_QE;
+
+ stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1);
+ sta_wr = ((uint16_t)cr1 << 8) | sr1;
+
+ stfsm_write_status(fsm, sta_wr, 2);
+
+ stfsm_wait_busy(fsm);
+ }
+
+ }
+
+ /*
+ * S25FLxxx devices support Program and Error error flags.
+ * Configure driver to check flags and clear if necessary.
+ */
+ fsm->configuration |= CFG_S25FL_CHECK_ERROR_FLAGS;
+
+ return 0;
+}
+
+static int stfsm_w25q_config(struct stfsm *fsm)
+{
+ uint32_t data_pads;
+ uint16_t sta_wr;
+ uint8_t sta1, sta2;
+ int ret;
+
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+
+ /* If using QUAD mode, set QE STATUS bit */
+ data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+ if (data_pads == 4) {
+ stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta1);
+ stfsm_read_status(fsm, FLASH_CMD_RDSR2, &sta2);
+
+ sta_wr = ((uint16_t)sta2 << 8) | sta1;
+
+ sta_wr |= W25Q_STATUS_QE;
+
+ stfsm_write_status(fsm, sta_wr, 2);
+
+ stfsm_wait_busy(fsm);
+ }
+
+ return 0;
+}
+
+static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size,
+ uint32_t offset)
+{
+ struct stfsm_seq *seq = &fsm->stfsm_seq_read;
+ uint32_t data_pads;
+ uint32_t read_mask;
+ uint32_t size_ub;
+ uint32_t size_lb;
+ uint32_t size_mop;
+ uint32_t tmp[4];
+ uint32_t page_buf[FLASH_PAGESIZE_32];
+ uint8_t *p;
+
+ dev_dbg(fsm->dev, "reading %d bytes from 0x%08x\n", size, offset);
+
+ /* Enter 32-bit address mode, if required */
+ if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 1);
+
+ /* Must read in multiples of 32 cycles (or 32*pads/8 Bytes) */
+ data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1;
+ read_mask = (data_pads << 2) - 1;
+
+ /* Handle non-aligned buf */
+ p = ((uint32_t)buf & 0x3) ? (uint8_t *)page_buf : buf;
+
+ /* Handle non-aligned size */
+ size_ub = (size + read_mask) & ~read_mask;
+ size_lb = size & ~read_mask;
+ size_mop = size & read_mask;
+
+ seq->data_size = TRANSFER_SIZE(size_ub);
+ seq->addr1 = (offset >> 16) & 0xffff;
+ seq->addr2 = offset & 0xffff;
+
+ stfsm_load_seq(fsm, seq);
+
+ if (size_lb)
+ stfsm_read_fifo(fsm, (uint32_t *)p, size_lb);
+
+ if (size_mop) {
+ stfsm_read_fifo(fsm, tmp, read_mask + 1);
+ memcpy(p + size_lb, &tmp, size_mop);
+ }
+
+ /* Handle non-aligned buf */
+ if ((uint32_t)buf & 0x3)
+ memcpy(buf, page_buf, size);
+
+ /* Wait for sequence to finish */
+ stfsm_wait_seq(fsm);
+
+ stfsm_clear_fifo(fsm);
+
+ /* Exit 32-bit address mode, if required */
+ if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 0);
+
+ return 0;
+}
+
+static int stfsm_write(struct stfsm *fsm, const uint8_t *buf,
+ uint32_t size, uint32_t offset)
+{
+ struct stfsm_seq *seq = &fsm->stfsm_seq_write;
+ uint32_t data_pads;
+ uint32_t write_mask;
+ uint32_t size_ub;
+ uint32_t size_lb;
+ uint32_t size_mop;
+ uint32_t tmp[4];
+ uint32_t page_buf[FLASH_PAGESIZE_32];
+ uint8_t *t = (uint8_t *)&tmp;
+ const uint8_t *p;
+ int ret;
+ int i;
+
+ dev_dbg(fsm->dev, "writing %d bytes to 0x%08x\n", size, offset);
+
+ /* Enter 32-bit address mode, if required */
+ if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 1);
+
+ /* Must write in multiples of 32 cycles (or 32*pads/8 bytes) */
+ data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1;
+ write_mask = (data_pads << 2) - 1;
+
+ /* Handle non-aligned buf */
+ if ((uint32_t)buf & 0x3) {
+ memcpy(page_buf, buf, size);
+ p = (uint8_t *)page_buf;
+ } else {
+ p = buf;
+ }
+
+ /* Handle non-aligned size */
+ size_ub = (size + write_mask) & ~write_mask;
+ size_lb = size & ~write_mask;
+ size_mop = size & write_mask;
+
+ seq->data_size = TRANSFER_SIZE(size_ub);
+ seq->addr1 = (offset >> 16) & 0xffff;
+ seq->addr2 = offset & 0xffff;
+
+ /* Need to set FIFO to write mode, before writing data to FIFO (see
+ * GNBvb79594)
+ */
+ writel(0x00040000, fsm->base + SPI_FAST_SEQ_CFG);
+
+ /*
+ * Before writing data to the FIFO, apply a small delay to allow a
+ * potential change of FIFO direction to complete.
+ */
+ if (fsm->fifo_dir_delay == 0)
+ readl(fsm->base + SPI_FAST_SEQ_CFG);
+ else
+ udelay(fsm->fifo_dir_delay);
+
+
+ /* Write data to FIFO, before starting sequence (see GNBvd79593) */
+ if (size_lb) {
+ stfsm_write_fifo(fsm, (uint32_t *)p, size_lb);
+ p += size_lb;
+ }
+
+ /* Handle non-aligned size */
+ if (size_mop) {
+ memset(t, 0xff, write_mask + 1); /* fill with 0xff's */
+ for (i = 0; i < size_mop; i++)
+ t[i] = *p++;
+
+ stfsm_write_fifo(fsm, tmp, write_mask + 1);
+ }
+
+ /* Start sequence */
+ stfsm_load_seq(fsm, seq);
+
+ /* Wait for sequence to finish */
+ stfsm_wait_seq(fsm);
+
+ /* Wait for completion */
+ ret = stfsm_wait_busy(fsm);
+ if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS)
+ stfsm_s25fl_clear_status_reg(fsm);
+
+ /* Exit 32-bit address mode, if required */
+ if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR) {
+ stfsm_enter_32bit_addr(fsm, 0);
+ if (fsm->configuration & CFG_WRITE_EX_32BIT_ADDR_DELAY)
+ udelay(1);
+ }
+
+ return 0;
+}
+
+/*
+ * Read an address range from the flash chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ */
+static int stfsm_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+ uint32_t bytes;
+
+ dev_dbg(fsm->dev, "%s from 0x%08x, len %zd\n",
+ __func__, (u32)from, len);
+
+ mutex_lock(&fsm->lock);
+
+ while (len > 0) {
+ bytes = min_t(size_t, len, FLASH_PAGESIZE);
+
+ stfsm_read(fsm, buf, bytes, from);
+
+ buf += bytes;
+ from += bytes;
+ len -= bytes;
+
+ *retlen += bytes;
+ }
+
+ mutex_unlock(&fsm->lock);
+
+ return 0;
+}
+
+static int stfsm_erase_sector(struct stfsm *fsm, uint32_t offset)
+{
+ struct stfsm_seq *seq = &stfsm_seq_erase_sector;
+ int ret;
+
+ dev_dbg(fsm->dev, "erasing sector at 0x%08x\n", offset);
+
+ /* Enter 32-bit address mode, if required */
+ if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 1);
+
+ seq->addr1 = (offset >> 16) & 0xffff;
+ seq->addr2 = offset & 0xffff;
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ /* Wait for completion */
+ ret = stfsm_wait_busy(fsm);
+ if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS)
+ stfsm_s25fl_clear_status_reg(fsm);
+
+ /* Exit 32-bit address mode, if required */
+ if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 0);
+
+ return ret;
+}
+
+static int stfsm_erase_chip(struct stfsm *fsm)
+{
+ const struct stfsm_seq *seq = &stfsm_seq_erase_chip;
+
+ dev_dbg(fsm->dev, "erasing chip\n");
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ return stfsm_wait_busy(fsm);
+}
+
+/*
+ * Write an address range to the flash chip. Data must be written in
+ * FLASH_PAGESIZE chunks. The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int stfsm_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+
+ u32 page_offs;
+ u32 bytes;
+ uint8_t *b = (uint8_t *)buf;
+ int ret = 0;
+
+ dev_dbg(fsm->dev, "%s to 0x%08x, len %zd\n", __func__, (u32)to, len);
+
+ /* Offset within page */
+ page_offs = to % FLASH_PAGESIZE;
+
+ mutex_lock(&fsm->lock);
+
+ while (len) {
+ /* Write up to page boundary */
+ bytes = min(FLASH_PAGESIZE - page_offs, len);
+
+ ret = stfsm_write(fsm, b, bytes, to);
+ if (ret)
+ goto out1;
+
+ b += bytes;
+ len -= bytes;
+ to += bytes;
+
+ /* We are now page-aligned */
+ page_offs = 0;
+
+ *retlen += bytes;
+
+ }
+
+out1:
+ mutex_unlock(&fsm->lock);
+
+ return ret;
+}
+
+/*
+ * Erase an address range on the flash chip. The address range may extend
+ * one or more erase sectors. Return an error is there is a problem erasing.
+ */
+static int stfsm_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+ u32 addr, len;
+ int ret;
+
+ dev_dbg(fsm->dev, "%s at 0x%llx, len %lld\n", __func__,
+ (long long)instr->addr, (long long)instr->len);
+
+ addr = instr->addr;
+ len = instr->len;
+
+ mutex_lock(&fsm->lock);
+
+ /* Whole-chip erase? */
+ if (len == mtd->size) {
+ ret = stfsm_erase_chip(fsm);
+ if (ret)
+ goto out1;
+ } else {
+ while (len) {
+ ret = stfsm_erase_sector(fsm, addr);
+ if (ret)
+ goto out1;
+
+ addr += mtd->erasesize;
+ len -= mtd->erasesize;
+ }
+ }
+
+ mutex_unlock(&fsm->lock);
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+
+ return 0;
+
+out1:
+ instr->state = MTD_ERASE_FAILED;
+ mutex_unlock(&fsm->lock);
+
+ return ret;
+}
+
+static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *jedec)
+{
+ const struct stfsm_seq *seq = &stfsm_seq_read_jedec;
+ uint32_t tmp[2];
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_read_fifo(fsm, tmp, 8);
+
+ memcpy(jedec, tmp, 5);
+
+ stfsm_wait_seq(fsm);
+}
+
+static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm)
+{
+ struct flash_info *info;
+ u16 ext_jedec;
+ u32 jedec;
+ u8 id[5];
+
+ stfsm_read_jedec(fsm, id);
+
+ jedec = id[0] << 16 | id[1] << 8 | id[2];
+ /*
+ * JEDEC also defines an optional "extended device information"
+ * string for after vendor-specific data, after the three bytes
+ * we use here. Supporting some chips might require using it.
+ */
+ ext_jedec = id[3] << 8 | id[4];
+
+ dev_dbg(fsm->dev, "JEDEC = 0x%08x [%02x %02x %02x %02x %02x]\n",
+ jedec, id[0], id[1], id[2], id[3], id[4]);
+
+ for (info = flash_types; info->name; info++) {
+ if (info->jedec_id == jedec) {
+ if (info->ext_id && info->ext_id != ext_jedec)
+ continue;
+ return info;
+ }
+ }
+ dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec);
+
+ return NULL;
+}
+
+static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode)
+{
+ int ret, timeout = 10;
+
+ /* Wait for controller to accept mode change */
+ while (--timeout) {
+ ret = readl(fsm->base + SPI_STA_MODE_CHANGE);
+ if (ret & 0x1)
+ break;
+ udelay(1);
+ }
+
+ if (!timeout)
+ return -EBUSY;
+
+ writel(mode, fsm->base + SPI_MODESELECT);
+
+ return 0;
+}
+
+static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq)
+{
+ uint32_t emi_freq;
+ uint32_t clk_div;
+
+ /* TODO: Make this dynamic */
+ emi_freq = STFSM_DEFAULT_EMI_FREQ;
+
+ /*
+ * Calculate clk_div - values between 2 and 128
+ * Multiple of 2, rounded up
+ */
+ clk_div = 2 * DIV_ROUND_UP(emi_freq, 2 * spi_freq);
+ if (clk_div < 2)
+ clk_div = 2;
+ else if (clk_div > 128)
+ clk_div = 128;
+
+ /*
+ * Determine a suitable delay for the IP to complete a change of
+ * direction of the FIFO. The required delay is related to the clock
+ * divider used. The following heuristics are based on empirical tests,
+ * using a 100MHz EMI clock.
+ */
+ if (clk_div <= 4)
+ fsm->fifo_dir_delay = 0;
+ else if (clk_div <= 10)
+ fsm->fifo_dir_delay = 1;
+ else
+ fsm->fifo_dir_delay = DIV_ROUND_UP(clk_div, 10);
+
+ dev_dbg(fsm->dev, "emi_clk = %uHZ, spi_freq = %uHZ, clk_div = %u\n",
+ emi_freq, spi_freq, clk_div);
+
+ writel(clk_div, fsm->base + SPI_CLOCKDIV);
+}
+
+static int stfsm_init(struct stfsm *fsm)
+{
+ int ret;
+
+ /* Perform a soft reset of the FSM controller */
+ writel(SEQ_CFG_SWRESET, fsm->base + SPI_FAST_SEQ_CFG);
+ udelay(1);
+ writel(0, fsm->base + SPI_FAST_SEQ_CFG);
+
+ /* Set clock to 'safe' frequency initially */
+ stfsm_set_freq(fsm, STFSM_FLASH_SAFE_FREQ);
+
+ /* Switch to FSM */
+ ret = stfsm_set_mode(fsm, SPI_MODESELECT_FSM);
+ if (ret)
+ return ret;
+
+ /* Set timing parameters */
+ writel(SPI_CFG_DEVICE_ST |
+ SPI_CFG_DEFAULT_MIN_CS_HIGH |
+ SPI_CFG_DEFAULT_CS_SETUPHOLD |
+ SPI_CFG_DEFAULT_DATA_HOLD,
+ fsm->base + SPI_CONFIGDATA);
+ writel(STFSM_DEFAULT_WR_TIME, fsm->base + SPI_STATUS_WR_TIME_REG);
+
+ /* Clear FIFO, just in case */
+ stfsm_clear_fifo(fsm);
+
+ return 0;
+}
+
+static void stfsm_fetch_platform_configs(struct platform_device *pdev)
+{
+ struct stfsm *fsm = platform_get_drvdata(pdev);
+ struct device_node *np = pdev->dev.of_node;
+ struct regmap *regmap;
+ uint32_t boot_device_reg;
+ uint32_t boot_device_spi;
+ uint32_t boot_device; /* Value we read from *boot_device_reg */
+ int ret;
+
+ /* Booting from SPI NOR Flash is the default */
+ fsm->booted_from_spi = true;
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+ if (IS_ERR(regmap))
+ goto boot_device_fail;
+
+ fsm->reset_signal = of_property_read_bool(np, "st,reset-signal");
+
+ fsm->reset_por = of_property_read_bool(np, "st,reset-por");
+
+ /* Where in the syscon the boot device information lives */
+ ret = of_property_read_u32(np, "st,boot-device-reg", &boot_device_reg);
+ if (ret)
+ goto boot_device_fail;
+
+ /* Boot device value when booted from SPI NOR */
+ ret = of_property_read_u32(np, "st,boot-device-spi", &boot_device_spi);
+ if (ret)
+ goto boot_device_fail;
+
+ ret = regmap_read(regmap, boot_device_reg, &boot_device);
+ if (ret)
+ goto boot_device_fail;
+
+ if (boot_device != boot_device_spi)
+ fsm->booted_from_spi = false;
+
+ return;
+
+boot_device_fail:
+ dev_warn(&pdev->dev,
+ "failed to fetch boot device, assuming boot from SPI\n");
+}
+
+static int stfsm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
+ struct flash_info *info;
+ struct resource *res;
+ struct stfsm *fsm;
+ int ret;
+
+ if (!np) {
+ dev_err(&pdev->dev, "No DT found\n");
+ return -EINVAL;
+ }
+ ppdata.of_node = np;
+
+ fsm = devm_kzalloc(&pdev->dev, sizeof(*fsm), GFP_KERNEL);
+ if (!fsm)
+ return -ENOMEM;
+
+ fsm->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, fsm);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Resource not found\n");
+ return -ENODEV;
+ }
+
+ fsm->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fsm->base)) {
+ dev_err(&pdev->dev,
+ "Failed to reserve memory region %pR\n", res);
+ return PTR_ERR(fsm->base);
+ }
+
+ mutex_init(&fsm->lock);
+
+ ret = stfsm_init(fsm);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialise FSM Controller\n");
+ return ret;
+ }
+
+ stfsm_fetch_platform_configs(pdev);
+
+ /* Detect SPI FLASH device */
+ info = stfsm_jedec_probe(fsm);
+ if (!info)
+ return -ENODEV;
+ fsm->info = info;
+
+ /* Use device size to determine address width */
+ if (info->sector_size * info->n_sectors > 0x1000000)
+ info->flags |= FLASH_FLAG_32BIT_ADDR;
+
+ /*
+ * Configure READ/WRITE/ERASE sequences according to platform and
+ * device flags.
+ */
+ if (info->config) {
+ ret = info->config(fsm);
+ if (ret)
+ return ret;
+ } else {
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+ }
+
+ fsm->mtd.name = info->name;
+ fsm->mtd.dev.parent = &pdev->dev;
+ fsm->mtd.type = MTD_NORFLASH;
+ fsm->mtd.writesize = 4;
+ fsm->mtd.writebufsize = fsm->mtd.writesize;
+ fsm->mtd.flags = MTD_CAP_NORFLASH;
+ fsm->mtd.size = info->sector_size * info->n_sectors;
+ fsm->mtd.erasesize = info->sector_size;
+
+ fsm->mtd._read = stfsm_mtd_read;
+ fsm->mtd._write = stfsm_mtd_write;
+ fsm->mtd._erase = stfsm_mtd_erase;
+
+ dev_info(&pdev->dev,
+ "Found serial flash device: %s\n"
+ " size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n",
+ info->name,
+ (long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
+ fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
+
+ return mtd_device_parse_register(&fsm->mtd, NULL, &ppdata, NULL, 0);
+}
+
+static int stfsm_remove(struct platform_device *pdev)
+{
+ struct stfsm *fsm = platform_get_drvdata(pdev);
+
+ return mtd_device_unregister(&fsm->mtd);
+}
+
+static struct of_device_id stfsm_match[] = {
+ { .compatible = "st,spi-fsm", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stfsm_match);
+
+static struct platform_driver stfsm_driver = {
+ .probe = stfsm_probe,
+ .remove = stfsm_remove,
+ .driver = {
+ .name = "st-spi-fsm",
+ .owner = THIS_MODULE,
+ .of_match_table = stfsm_match,
+ },
+};
+module_platform_driver(stfsm_driver);
+
+MODULE_AUTHOR("Angus Clark <angus.clark@st.com>");
+MODULE_DESCRIPTION("ST SPI FSM driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-26 16:37:14 +0000