diff options
Diffstat (limited to 'drivers/mtd/maps/Kconfig')
| -rw-r--r-- | drivers/mtd/maps/Kconfig | 77 |
1 files changed, 0 insertions, 77 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index c26938382f6..bed9d58d574 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -249,22 +249,6 @@ config MTD_LANTIQ help Support for NOR flash attached to the Lantiq SoC's External Bus Unit. -config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CFI_INTELEXT && BROKEN - help - MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP". - For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm> - and <http://www.ssv-embedded.de/ssv/pc104/p170.htm> - -config MTD_DILNETPC_BOOTSIZE - hex "Size of DIL/Net PC flash boot partition" - depends on MTD_DILNETPC - default "0x80000" - help - The amount of space taken up by the kernel or Etherboot - on the DIL/Net PC flash chips. - config MTD_L440GX tristate "BIOS flash chip on Intel L440GX boards" depends on X86 && MTD_JEDECPROBE @@ -274,42 +258,6 @@ config MTD_L440GX BE VERY CAREFUL. -config MTD_TQM8XXL - tristate "CFI Flash device mapped on TQM8XXL" - depends on MTD_CFI && TQM8xxL - help - The TQM8xxL PowerPC board has up to two banks of CFI-compliant - chips, currently uses AMD one. This 'mapping' driver supports - that arrangement, allowing the CFI probe and command set driver - code to communicate with the chips on the TQM8xxL board. More at - <http://www.denx.de/wiki/PPCEmbedded/>. - -config MTD_RPXLITE - tristate "CFI Flash device mapped on RPX Lite or CLLF" - depends on MTD_CFI && (RPXCLASSIC || RPXLITE) - help - The RPXLite PowerPC board has CFI-compliant chips mapped in - a strange sparse mapping. This 'mapping' driver supports that - arrangement, allowing the CFI probe and command set driver code - to communicate with the chips on the RPXLite board. More at - <http://www.embeddedplanet.com/>. - -config MTD_MBX860 - tristate "System flash on MBX860 board" - depends on MTD_CFI && MBX - help - This enables access routines for the flash chips on the Motorola - MBX860 board. If you have one of these boards and would like - to use the flash chips on it, say 'Y'. - -config MTD_DBOX2 - tristate "CFI Flash device mapped on D-Box2" - depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD - help - This enables access routines for the flash chips on the Nokia/Sagem - D-Box 2 board. If you have one of these boards and would like to use - the flash chips on it, say 'Y'. - config MTD_CFI_FLAGADM tristate "CFI Flash device mapping on FlagaDM" depends on 8xx && MTD_CFI @@ -349,15 +297,6 @@ config MTD_IXP4XX IXDP425 and Coyote. If you have an IXP4xx based board and would like to use the flash chips on it, say 'Y'. -config MTD_IXP2000 - tristate "CFI Flash device mapped on Intel IXP2000 based systems" - depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000 - help - This enables MTD access to flash devices on platforms based - on Intel's IXP2000 family of network processors. If you have an - IXP2000 based board and would like to use the flash chips on it, - say 'Y'. - config MTD_AUTCPU12 bool "NV-RAM mapping AUTCPU12 board" depends on ARCH_AUTCPU12 @@ -372,13 +311,6 @@ config MTD_IMPA7 This enables access to the NOR Flash on the impA7 board of implementa GmbH. If you have such a board, say 'Y' here. -config MTD_H720X - tristate "Hynix evaluation board mappings" - depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 ) - help - This enables access to the flash chips on the Hynix evaluation boards. - If you have such a board, say 'Y'. - # This needs CFI or JEDEC, depending on the cards found. config MTD_PCI tristate "PCI MTD driver" @@ -433,15 +365,6 @@ config MTD_UCLINUX help Map driver to support image based filesystems for uClinux. -config MTD_DMV182 - tristate "Map driver for Dy-4 SVME/DMV-182 board." - depends on DMV182 - select MTD_MAP_BANK_WIDTH_32 - select MTD_CFI_I8 - select MTD_CFI_AMDSTD - help - Map driver for Dy-4 SVME/DMV-182 board. - config MTD_INTEL_VR_NOR tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0" depends on PCI |