summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/Kconfig')
-rw-r--r--drivers/mtd/nand/Kconfig24
1 files changed, 15 insertions, 9 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f3276897859..ce96c091f01 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -74,6 +74,12 @@ config MTD_NAND_AMS_DELTA
help
Support for NAND flash on Amstrad E3 (Delta).
+config MTD_NAND_OMAP2
+ tristate "NAND Flash device on OMAP2 and OMAP3"
+ depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ help
+ Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+
config MTD_NAND_TS7250
tristate "NAND Flash device on TS-7250 board"
depends on MACH_TS72XX
@@ -139,27 +145,27 @@ config MTD_NAND_PPCHAMELEONEVB
This enables the NAND flash driver on the PPChameleon EVB Board.
config MTD_NAND_S3C2410
- tristate "NAND Flash support for S3C2410/S3C2440 SoC"
- depends on ARCH_S3C2410
+ tristate "NAND Flash support for Samsung S3C SoCs"
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
help
- This enables the NAND flash controller on the S3C2410 and S3C2440
+ This enables the NAND flash controller on the S3C24xx and S3C64xx
SoCs
No board specific support is done by this driver, each board
must advertise a platform_device for the driver to attach.
config MTD_NAND_S3C2410_DEBUG
- bool "S3C2410 NAND driver debug"
+ bool "Samsung S3C NAND driver debug"
depends on MTD_NAND_S3C2410
help
- Enable debugging of the S3C2410 NAND driver
+ Enable debugging of the S3C NAND driver
config MTD_NAND_S3C2410_HWECC
- bool "S3C2410 NAND Hardware ECC"
+ bool "Samsung S3C NAND Hardware ECC"
depends on MTD_NAND_S3C2410
help
- Enable the use of the S3C2410's internal ECC generator when
- using NAND. Early versions of the chip have had problems with
+ Enable the use of the controller's internal ECC generator when
+ using NAND. Early versions of the chips have had problems with
incorrect ECC generation, and if using these, the default of
software ECC is preferable.
@@ -171,7 +177,7 @@ config MTD_NAND_NDFC
NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
config MTD_NAND_S3C2410_CLKSTOP
- bool "S3C2410 NAND IDLE clock stop"
+ bool "Samsung S3C NAND IDLE clock stop"
depends on MTD_NAND_S3C2410
default n
help