diff options
Diffstat (limited to 'drivers/mtd/nand/fsl_elbc_nand.c')
-rw-r--r-- | drivers/mtd/nand/fsl_elbc_nand.c | 21 |
1 files changed, 14 insertions, 7 deletions
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 80b5264f0a3..8638b5e734c 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -75,6 +75,7 @@ struct fsl_elbc_fcm_ctrl { unsigned int use_mdr; /* Non zero if the MDR is to be set */ unsigned int oob; /* Non zero if operating on OOB data */ unsigned int counter; /* counter for the initializations */ + unsigned int max_bitflips; /* Saved during READ0 cmd */ }; /* These map to the positions used by the FCM hardware ECC generator */ @@ -253,6 +254,8 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) if (chip->ecc.mode != NAND_ECC_HW) return 0; + elbc_fcm_ctrl->max_bitflips = 0; + if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) { uint32_t lteccr = in_be32(&lbc->lteccr); /* @@ -262,11 +265,16 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) * bits 28-31 are uncorrectable errors, marked elsewhere. * for small page nand only 1 bit is used. * if the ELBC doesn't have the lteccr register it reads 0 + * FIXME: 4 bits can be corrected on NANDs with 2k pages, so + * count the number of sub-pages with bitflips and update + * ecc_stats.corrected accordingly. */ if (lteccr & 0x000F000F) out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */ - if (lteccr & 0x000F0000) + if (lteccr & 0x000F0000) { mtd->ecc_stats.corrected++; + elbc_fcm_ctrl->max_bitflips = 1; + } } return 0; @@ -743,13 +751,17 @@ static int fsl_elbc_read_page(struct mtd_info *mtd, uint8_t *buf, int page) { + struct fsl_elbc_mtd *priv = chip->priv; + struct fsl_lbc_ctrl *ctrl = priv->ctrl; + struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand; + fsl_elbc_read_buf(mtd, buf, mtd->writesize); fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize); if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL) mtd->ecc_stats.failed++; - return 0; + return elbc_fcm_ctrl->max_bitflips; } /* ECC will be calculated automatically, and errors will be detected in @@ -814,11 +826,6 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->ecc.size = 512; chip->ecc.bytes = 3; chip->ecc.strength = 1; - /* - * FIXME: can hardware ecc correct 4 bitflips if page size is - * 2k? Then does hardware report number of corrections for this - * case? If so, ecc_stats reporting needs to be fixed as well. - */ } else { /* otherwise fall back to default software ECC */ chip->ecc.mode = NAND_ECC_SOFT; |