diff options
Diffstat (limited to 'drivers/mtd/nand/gpmi-nand/gpmi-nand.c')
-rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 184 |
1 files changed, 95 insertions, 89 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index b68e04310bd..a05b7b444d4 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -25,6 +25,8 @@ #include <linux/mtd/gpmi-nand.h> #include <linux/mtd/partitions.h> #include <linux/pinctrl/consumer.h> +#include <linux/of.h> +#include <linux/of_device.h> #include "gpmi-nand.h" /* add our owner bbt descriptor */ @@ -387,7 +389,7 @@ static void release_bch_irq(struct gpmi_nand_data *this) static bool gpmi_dma_filter(struct dma_chan *chan, void *param) { struct gpmi_nand_data *this = param; - struct resource *r = this->private; + int dma_channel = (int)this->private; if (!mxs_dma_is_apbh(chan)) return false; @@ -399,7 +401,7 @@ static bool gpmi_dma_filter(struct dma_chan *chan, void *param) * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7 * (These eight channels share the same IRQ!) */ - if (r->start <= chan->chan_id && chan->chan_id <= r->end) { + if (dma_channel == chan->chan_id) { chan->private = &this->dma_data; return true; } @@ -419,57 +421,45 @@ static void release_dma_channels(struct gpmi_nand_data *this) static int __devinit acquire_dma_channels(struct gpmi_nand_data *this) { struct platform_device *pdev = this->pdev; - struct gpmi_nand_platform_data *pdata = this->pdata; - struct resources *res = &this->resources; - struct resource *r, *r_dma; - unsigned int i; + struct resource *r_dma; + struct device_node *dn; + int dma_channel; + unsigned int ret; + struct dma_chan *dma_chan; + dma_cap_mask_t mask; + + /* dma channel, we only use the first one. */ + dn = pdev->dev.of_node; + ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel); + if (ret) { + pr_err("unable to get DMA channel from dt.\n"); + goto acquire_err; + } + this->private = (void *)dma_channel; - r = platform_get_resource_byname(pdev, IORESOURCE_DMA, - GPMI_NAND_DMA_CHANNELS_RES_NAME); + /* gpmi dma interrupt */ r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ, GPMI_NAND_DMA_INTERRUPT_RES_NAME); - if (!r || !r_dma) { + if (!r_dma) { pr_err("Can't get resource for DMA\n"); - return -ENXIO; + goto acquire_err; } + this->dma_data.chan_irq = r_dma->start; - /* used in gpmi_dma_filter() */ - this->private = r; - - for (i = r->start; i <= r->end; i++) { - struct dma_chan *dma_chan; - dma_cap_mask_t mask; + /* request dma channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - if (i - r->start >= pdata->max_chip_count) - break; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - /* get the DMA interrupt */ - if (r_dma->start == r_dma->end) { - /* only register the first. */ - if (i == r->start) - this->dma_data.chan_irq = r_dma->start; - else - this->dma_data.chan_irq = NO_IRQ; - } else - this->dma_data.chan_irq = r_dma->start + (i - r->start); - - dma_chan = dma_request_channel(mask, gpmi_dma_filter, this); - if (!dma_chan) - goto acquire_err; - - /* fill the first empty item */ - this->dma_chans[i - r->start] = dma_chan; + dma_chan = dma_request_channel(mask, gpmi_dma_filter, this); + if (!dma_chan) { + pr_err("dma_request_channel failed.\n"); + goto acquire_err; } - res->dma_low_channel = r->start; - res->dma_high_channel = i; + this->dma_chans[0] = dma_chan; return 0; acquire_err: - pr_err("Can't acquire DMA channel %u\n", i); release_dma_channels(this); return -EINVAL; } @@ -851,7 +841,7 @@ static void block_mark_swapping(struct gpmi_nand_data *this, } static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page) + uint8_t *buf, int oob_required, int page) { struct gpmi_nand_data *this = chip->priv; struct bch_geometry *nfc_geo = &this->bch_geometry; @@ -917,28 +907,31 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, mtd->ecc_stats.corrected += corrected; } - /* - * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for - * details about our policy for delivering the OOB. - * - * We fill the caller's buffer with set bits, and then copy the block - * mark to th caller's buffer. Note that, if block mark swapping was - * necessary, it has already been done, so we can rely on the first - * byte of the auxiliary buffer to contain the block mark. - */ - memset(chip->oob_poi, ~0, mtd->oobsize); - chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; + if (oob_required) { + /* + * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() + * for details about our policy for delivering the OOB. + * + * We fill the caller's buffer with set bits, and then copy the + * block mark to th caller's buffer. Note that, if block mark + * swapping was necessary, it has already been done, so we can + * rely on the first byte of the auxiliary buffer to contain + * the block mark. + */ + memset(chip->oob_poi, ~0, mtd->oobsize); + chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; - read_page_swap_end(this, buf, mtd->writesize, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); + read_page_swap_end(this, buf, mtd->writesize, + this->payload_virt, this->payload_phys, + nfc_geo->payload_size, + payload_virt, payload_phys); + } exit_nfc: return ret; } -static void gpmi_ecc_write_page(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf) +static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) { struct gpmi_nand_data *this = chip->priv; struct bch_geometry *nfc_geo = &this->bch_geometry; @@ -1077,7 +1070,7 @@ exit_auxiliary: * this driver. */ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page, int sndcmd) + int page) { struct gpmi_nand_data *this = chip->priv; @@ -1100,11 +1093,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, chip->oob_poi[0] = chip->read_byte(mtd); } - /* - * Return true, indicating that the next call to this function must send - * a command. - */ - return true; + return 0; } static int @@ -1318,7 +1307,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) /* Write the first page of the current stride. */ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page); chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); - chip->ecc.write_page_raw(mtd, chip, buffer); + chip->ecc.write_page_raw(mtd, chip, buffer, 0); chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); /* Wait for the write to finish. */ @@ -1444,6 +1433,10 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this) if (ret) return ret; + /* Adjust the ECC strength according to the chip. */ + this->nand.ecc.strength = this->bch_geometry.ecc_strength; + this->mtd.ecc_strength = this->bch_geometry.ecc_strength; + /* NAND boot init, depends on the gpmi_set_geometry(). */ return nand_boot_init(this); } @@ -1471,9 +1464,9 @@ void gpmi_nfc_exit(struct gpmi_nand_data *this) static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) { - struct gpmi_nand_platform_data *pdata = this->pdata; struct mtd_info *mtd = &this->mtd; struct nand_chip *chip = &this->nand; + struct mtd_part_parser_data ppdata = {}; int ret; /* init current chip */ @@ -1502,6 +1495,7 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) chip->options |= NAND_NO_SUBPAGE_WRITE; chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = 1; + chip->ecc.strength = 8; chip->ecc.layout = &gpmi_hw_ecclayout; /* Allocate a temporary DMA buffer for reading ID in the nand_scan() */ @@ -1511,14 +1505,14 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = nand_scan(mtd, pdata->max_chip_count); + ret = nand_scan(mtd, 1); if (ret) { pr_err("Chip scan failed\n"); goto err_out; } - ret = mtd_device_parse_register(mtd, NULL, NULL, - pdata->partitions, pdata->partition_count); + ppdata.of_node = this->pdev->dev.of_node; + ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); if (ret) goto err_out; return 0; @@ -1528,12 +1522,41 @@ err_out: return ret; } +static const struct platform_device_id gpmi_ids[] = { + { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, }, + { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, }, + { .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, }, + {}, +}; + +static const struct of_device_id gpmi_nand_id_table[] = { + { + .compatible = "fsl,imx23-gpmi-nand", + .data = (void *)&gpmi_ids[IS_MX23] + }, { + .compatible = "fsl,imx28-gpmi-nand", + .data = (void *)&gpmi_ids[IS_MX28] + }, { + .compatible = "fsl,imx6q-gpmi-nand", + .data = (void *)&gpmi_ids[IS_MX6Q] + }, {} +}; +MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); + static int __devinit gpmi_nand_probe(struct platform_device *pdev) { - struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data; struct gpmi_nand_data *this; + const struct of_device_id *of_id; int ret; + of_id = of_match_device(gpmi_nand_id_table, &pdev->dev); + if (of_id) { + pdev->id_entry = of_id->data; + } else { + pr_err("Failed to find the right device id.\n"); + return -ENOMEM; + } + this = kzalloc(sizeof(*this), GFP_KERNEL); if (!this) { pr_err("Failed to allocate per-device memory\n"); @@ -1543,13 +1566,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, this); this->pdev = pdev; this->dev = &pdev->dev; - this->pdata = pdata; - - if (pdata->platform_init) { - ret = pdata->platform_init(); - if (ret) - goto platform_init_error; - } ret = acquire_resources(this); if (ret) @@ -1567,7 +1583,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev) exit_nfc_init: release_resources(this); -platform_init_error: exit_acquire_resources: platform_set_drvdata(pdev, NULL); kfree(this); @@ -1585,19 +1600,10 @@ static int __exit gpmi_nand_remove(struct platform_device *pdev) return 0; } -static const struct platform_device_id gpmi_ids[] = { - { - .name = "imx23-gpmi-nand", - .driver_data = IS_MX23, - }, { - .name = "imx28-gpmi-nand", - .driver_data = IS_MX28, - }, {}, -}; - static struct platform_driver gpmi_nand_driver = { .driver = { .name = "gpmi-nand", + .of_match_table = gpmi_nand_id_table, }, .probe = gpmi_nand_probe, .remove = __exit_p(gpmi_nand_remove), |