summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/mxc_nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/mxc_nand.c')
-rw-r--r--drivers/mtd/nand/mxc_nand.c783
1 files changed, 296 insertions, 487 deletions
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 65b26d5a5c0..45dec5770da 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -33,9 +33,13 @@
#include <asm/mach/flash.h>
#include <mach/mxc_nand.h>
+#include <mach/hardware.h>
#define DRIVER_NAME "mxc_nand"
+#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
+#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27())
+
/* Addresses for NFC registers */
#define NFC_BUF_SIZE 0xE00
#define NFC_BUF_ADDR 0xE04
@@ -46,24 +50,14 @@
#define NFC_RSLTMAIN_AREA 0xE0E
#define NFC_RSLTSPARE_AREA 0xE10
#define NFC_WRPROT 0xE12
-#define NFC_UNLOCKSTART_BLKADDR 0xE14
-#define NFC_UNLOCKEND_BLKADDR 0xE16
+#define NFC_V1_UNLOCKSTART_BLKADDR 0xe14
+#define NFC_V1_UNLOCKEND_BLKADDR 0xe16
+#define NFC_V21_UNLOCKSTART_BLKADDR 0xe20
+#define NFC_V21_UNLOCKEND_BLKADDR 0xe22
#define NFC_NF_WRPRST 0xE18
#define NFC_CONFIG1 0xE1A
#define NFC_CONFIG2 0xE1C
-/* Addresses for NFC RAM BUFFER Main area 0 */
-#define MAIN_AREA0 0x000
-#define MAIN_AREA1 0x200
-#define MAIN_AREA2 0x400
-#define MAIN_AREA3 0x600
-
-/* Addresses for NFC SPARE BUFFER Spare area 0 */
-#define SPARE_AREA0 0x800
-#define SPARE_AREA1 0x810
-#define SPARE_AREA2 0x820
-#define SPARE_AREA3 0x830
-
/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
* for Command operation */
#define NFC_CMD 0x1
@@ -106,48 +100,66 @@ struct mxc_nand_host {
struct mtd_partition *parts;
struct device *dev;
+ void *spare0;
+ void *main_area0;
+ void *main_area1;
+
+ void __iomem *base;
void __iomem *regs;
- int spare_only;
int status_request;
- int pagesize_2k;
- uint16_t col_addr;
struct clk *clk;
int clk_act;
int irq;
wait_queue_head_t irq_waitq;
-};
-
-/* Define delays in microsec for NAND device operations */
-#define TROP_US_DELAY 2000
-/* Macros to get byte and bit positions of ECC */
-#define COLPOS(x) ((x) >> 3)
-#define BITPOS(x) ((x) & 0xf)
-/* Define single bit Error positions in Main & Spare area */
-#define MAIN_SINGLEBIT_ERROR 0x4
-#define SPARE_SINGLEBIT_ERROR 0x1
-
-/* OOB placement block for use with hardware ecc generation */
-static struct nand_ecclayout nand_hw_eccoob_8 = {
- .eccbytes = 5,
- .eccpos = {6, 7, 8, 9, 10},
- .oobfree = {{0, 5}, {11, 5}, }
+ uint8_t *data_buf;
+ unsigned int buf_start;
+ int spare_len;
};
-static struct nand_ecclayout nand_hw_eccoob_16 = {
+/* OOB placement block for use with hardware ecc generation */
+static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
.eccbytes = 5,
.eccpos = {6, 7, 8, 9, 10},
- .oobfree = {{0, 5}, {11, 5}, }
+ .oobfree = {{0, 5}, {12, 4}, }
};
-static struct nand_ecclayout nand_hw_eccoob_64 = {
+static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
.eccbytes = 20,
.eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
.oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
};
+/* OOB description for 512 byte pages with 16 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
+ .eccbytes = 1 * 9,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15
+ },
+ .oobfree = {
+ {.offset = 0, .length = 5}
+ }
+};
+
+/* OOB description for 2048 byte pages with 64 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
+ .eccbytes = 4 * 9,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 55, 56, 57, 58, 59, 60, 61, 62, 63
+ },
+ .oobfree = {
+ {.offset = 2, .length = 4},
+ {.offset = 16, .length = 7},
+ {.offset = 32, .length = 7},
+ {.offset = 48, .length = 7}
+ }
+};
+
#ifdef CONFIG_MTD_PARTITIONS
static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
#endif
@@ -170,10 +182,10 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
/* This function polls the NANDFC to wait for the basic operation to
* complete by checking the INT bit of config2 register.
*/
-static void wait_op_done(struct mxc_nand_host *host, int max_retries,
- uint16_t param, int useirq)
+static void wait_op_done(struct mxc_nand_host *host, int useirq)
{
uint32_t tmp;
+ int max_retries = 2000;
if (useirq) {
if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
@@ -200,8 +212,8 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
- __func__, param);
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
+ __func__);
}
}
@@ -215,7 +227,7 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
writew(NFC_CMD, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, cmd, useirq);
+ wait_op_done(host, useirq);
}
/* This function sends an address (or partial address) to the
@@ -229,82 +241,47 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
writew(NFC_ADDR, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, addr, islast);
+ wait_op_done(host, islast);
}
-/* This function requests the NANDFC to initate the transfer
- * of data currently in the NANDFC RAM buffer to the NAND device. */
-static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
- int spare_only)
+static void send_page(struct mtd_info *mtd, unsigned int ops)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
-
- /* NANDFC buffer 0 is used for page read/write */
- writew(buf_id, host->regs + NFC_BUF_ADDR);
-
- /* Configure spare or page+spare access */
- if (!host->pagesize_2k) {
- uint16_t config1 = readw(host->regs + NFC_CONFIG1);
- if (spare_only)
- config1 |= NFC_SP_EN;
- else
- config1 &= ~(NFC_SP_EN);
- writew(config1, host->regs + NFC_CONFIG1);
- }
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ int bufs, i;
- writew(NFC_INPUT, host->regs + NFC_CONFIG2);
+ if (nfc_is_v1() && mtd->writesize > 512)
+ bufs = 4;
+ else
+ bufs = 1;
- /* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, spare_only, true);
-}
+ for (i = 0; i < bufs; i++) {
-/* Requests NANDFC to initated the transfer of data from the
- * NAND device into in the NANDFC ram buffer. */
-static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
- int spare_only)
-{
- DEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
+ /* NANDFC buffer 0 is used for page read/write */
+ writew(i, host->regs + NFC_BUF_ADDR);
- /* NANDFC buffer 0 is used for page read/write */
- writew(buf_id, host->regs + NFC_BUF_ADDR);
+ writew(ops, host->regs + NFC_CONFIG2);
- /* Configure spare or page+spare access */
- if (!host->pagesize_2k) {
- uint32_t config1 = readw(host->regs + NFC_CONFIG1);
- if (spare_only)
- config1 |= NFC_SP_EN;
- else
- config1 &= ~NFC_SP_EN;
- writew(config1, host->regs + NFC_CONFIG1);
+ /* Wait for operation to complete */
+ wait_op_done(host, true);
}
-
- writew(NFC_OUTPUT, host->regs + NFC_CONFIG2);
-
- /* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, spare_only, true);
}
/* Request the NANDFC to perform a read of the NAND device ID. */
static void send_read_id(struct mxc_nand_host *host)
{
struct nand_chip *this = &host->nand;
- uint16_t tmp;
/* NANDFC buffer 0 is used for device ID output */
writew(0x0, host->regs + NFC_BUF_ADDR);
- /* Read ID into main buffer */
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_SP_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
-
writew(NFC_ID, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, 0, true);
+ wait_op_done(host, true);
if (this->options & NAND_BUSWIDTH_16) {
- void __iomem *main_buf = host->regs + MAIN_AREA0;
+ void __iomem *main_buf = host->main_area0;
/* compress the ID info */
writeb(readb(main_buf + 2), main_buf + 1);
writeb(readb(main_buf + 4), main_buf + 2);
@@ -312,15 +289,16 @@ static void send_read_id(struct mxc_nand_host *host)
writeb(readb(main_buf + 8), main_buf + 4);
writeb(readb(main_buf + 10), main_buf + 5);
}
+ memcpy(host->data_buf, host->main_area0, 16);
}
/* This function requests the NANDFC to perform a read of the
* NAND device status and returns the current status. */
static uint16_t get_dev_status(struct mxc_nand_host *host)
{
- void __iomem *main_buf = host->regs + MAIN_AREA1;
+ void __iomem *main_buf = host->main_area1;
uint32_t store;
- uint16_t ret, tmp;
+ uint16_t ret;
/* Issue status request to NAND device */
/* store the main area1 first word, later do recovery */
@@ -329,15 +307,10 @@ static uint16_t get_dev_status(struct mxc_nand_host *host)
* corruption of read/write buffer on status requests. */
writew(1, host->regs + NFC_BUF_ADDR);
- /* Read status into main buffer */
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_SP_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
-
writew(NFC_STATUS, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, 0, true);
+ wait_op_done(host, true);
/* Status is placed in first word of main buffer */
/* get status, then recovery area 1 data */
@@ -397,32 +370,14 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- uint8_t ret = 0;
- uint16_t col, rd_word;
- uint16_t __iomem *main_buf = host->regs + MAIN_AREA0;
- uint16_t __iomem *spare_buf = host->regs + SPARE_AREA0;
+ uint8_t ret;
/* Check for status request */
if (host->status_request)
return get_dev_status(host) & 0xFF;
- /* Get column for 16-bit access */
- col = host->col_addr >> 1;
-
- /* If we are accessing the spare region */
- if (host->spare_only)
- rd_word = readw(&spare_buf[col]);
- else
- rd_word = readw(&main_buf[col]);
-
- /* Pick upper/lower byte of word from RAM buffer */
- if (host->col_addr & 0x1)
- ret = (rd_word >> 8) & 0xFF;
- else
- ret = rd_word & 0xFF;
-
- /* Update saved column address */
- host->col_addr++;
+ ret = *(uint8_t *)(host->data_buf + host->buf_start);
+ host->buf_start++;
return ret;
}
@@ -431,33 +386,10 @@ static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- uint16_t col, rd_word, ret;
- uint16_t __iomem *p;
-
- DEBUG(MTD_DEBUG_LEVEL3,
- "mxc_nand_read_word(col = %d)\n", host->col_addr);
-
- col = host->col_addr;
- /* Adjust saved column address */
- if (col < mtd->writesize && host->spare_only)
- col += mtd->writesize;
+ uint16_t ret;
- if (col < mtd->writesize)
- p = (host->regs + MAIN_AREA0) + (col >> 1);
- else
- p = (host->regs + SPARE_AREA0) + ((col - mtd->writesize) >> 1);
-
- if (col & 1) {
- rd_word = readw(p);
- ret = (rd_word >> 8) & 0xff;
- rd_word = readw(&p[1]);
- ret |= (rd_word << 8) & 0xff00;
-
- } else
- ret = readw(p);
-
- /* Update saved column address */
- host->col_addr = col + 2;
+ ret = *(uint16_t *)(host->data_buf + host->buf_start);
+ host->buf_start += 2;
return ret;
}
@@ -470,94 +402,14 @@ static void mxc_nand_write_buf(struct mtd_info *mtd,
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- int n, col, i = 0;
-
- DEBUG(MTD_DEBUG_LEVEL3,
- "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr,
- len);
-
- col = host->col_addr;
+ u16 col = host->buf_start;
+ int n = mtd->oobsize + mtd->writesize - col;
- /* Adjust saved column address */
- if (col < mtd->writesize && host->spare_only)
- col += mtd->writesize;
+ n = min(n, len);
- n = mtd->writesize + mtd->oobsize - col;
- n = min(len, n);
-
- DEBUG(MTD_DEBUG_LEVEL3,
- "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n);
-
- while (n) {
- void __iomem *p;
-
- if (col < mtd->writesize)
- p = host->regs + MAIN_AREA0 + (col & ~3);
- else
- p = host->regs + SPARE_AREA0 -
- mtd->writesize + (col & ~3);
-
- DEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__,
- __LINE__, p);
-
- if (((col | (int)&buf[i]) & 3) || n < 16) {
- uint32_t data = 0;
-
- if (col & 3 || n < 4)
- data = readl(p);
-
- switch (col & 3) {
- case 0:
- if (n) {
- data = (data & 0xffffff00) |
- (buf[i++] << 0);
- n--;
- col++;
- }
- case 1:
- if (n) {
- data = (data & 0xffff00ff) |
- (buf[i++] << 8);
- n--;
- col++;
- }
- case 2:
- if (n) {
- data = (data & 0xff00ffff) |
- (buf[i++] << 16);
- n--;
- col++;
- }
- case 3:
- if (n) {
- data = (data & 0x00ffffff) |
- (buf[i++] << 24);
- n--;
- col++;
- }
- }
-
- writel(data, p);
- } else {
- int m = mtd->writesize - col;
+ memcpy(host->data_buf + col, buf, n);
- if (col >= mtd->writesize)
- m += mtd->oobsize;
-
- m = min(n, m) & ~3;
-
- DEBUG(MTD_DEBUG_LEVEL3,
- "%s:%d: n = %d, m = %d, i = %d, col = %d\n",
- __func__, __LINE__, n, m, i, col);
-
- memcpy(p, &buf[i], m);
- col += m;
- i += m;
- n -= m;
- }
- }
- /* Update saved column address */
- host->col_addr = col;
+ host->buf_start += n;
}
/* Read the data buffer from the NAND Flash. To read the data from NAND
@@ -568,75 +420,14 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- int n, col, i = 0;
-
- DEBUG(MTD_DEBUG_LEVEL3,
- "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len);
-
- col = host->col_addr;
+ u16 col = host->buf_start;
+ int n = mtd->oobsize + mtd->writesize - col;
- /* Adjust saved column address */
- if (col < mtd->writesize && host->spare_only)
- col += mtd->writesize;
+ n = min(n, len);
- n = mtd->writesize + mtd->oobsize - col;
- n = min(len, n);
-
- while (n) {
- void __iomem *p;
-
- if (col < mtd->writesize)
- p = host->regs + MAIN_AREA0 + (col & ~3);
- else
- p = host->regs + SPARE_AREA0 -
- mtd->writesize + (col & ~3);
-
- if (((col | (int)&buf[i]) & 3) || n < 16) {
- uint32_t data;
-
- data = readl(p);
- switch (col & 3) {
- case 0:
- if (n) {
- buf[i++] = (uint8_t) (data);
- n--;
- col++;
- }
- case 1:
- if (n) {
- buf[i++] = (uint8_t) (data >> 8);
- n--;
- col++;
- }
- case 2:
- if (n) {
- buf[i++] = (uint8_t) (data >> 16);
- n--;
- col++;
- }
- case 3:
- if (n) {
- buf[i++] = (uint8_t) (data >> 24);
- n--;
- col++;
- }
- }
- } else {
- int m = mtd->writesize - col;
-
- if (col >= mtd->writesize)
- m += mtd->oobsize;
-
- m = min(n, m) & ~3;
- memcpy(&buf[i], p, m);
- col += m;
- i += m;
- n -= m;
- }
- }
- /* Update saved column address */
- host->col_addr = col;
+ memcpy(buf, host->data_buf + col, len);
+ host->buf_start += len;
}
/* Used by the upper layer to verify the data in NAND Flash
@@ -654,23 +445,6 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
-#ifdef CONFIG_MTD_NAND_MXC_FORCE_CE
- if (chip > 0) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "ERROR: Illegal chip select (chip = %d)\n", chip);
- return;
- }
-
- if (chip == -1) {
- writew(readw(host->regs + NFC_CONFIG1) & ~NFC_CE,
- host->regs + NFC_CONFIG1);
- return;
- }
-
- writew(readw(host->regs + NFC_CONFIG1) | NFC_CE,
- host->regs + NFC_CONFIG1);
-#endif
-
switch (chip) {
case -1:
/* Disable the NFC clock */
@@ -692,94 +466,40 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
}
}
-/* Used by the upper layer to write command to NAND Flash for
- * different operations to be carried out on NAND Flash */
-static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
- int column, int page_addr)
+/*
+ * Function to transfer data to/from spare area.
+ */
+static void copy_spare(struct mtd_info *mtd, bool bfrom)
{
- struct nand_chip *nand_chip = mtd->priv;
- struct mxc_nand_host *host = nand_chip->priv;
- int useirq = true;
-
- DEBUG(MTD_DEBUG_LEVEL3,
- "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
- command, column, page_addr);
-
- /* Reset command state information */
- host->status_request = false;
-
- /* Command pre-processing step */
- switch (command) {
-
- case NAND_CMD_STATUS:
- host->col_addr = 0;
- host->status_request = true;
- break;
-
- case NAND_CMD_READ0:
- host->col_addr = column;
- host->spare_only = false;
- useirq = false;
- break;
-
- case NAND_CMD_READOOB:
- host->col_addr = column;
- host->spare_only = true;
- useirq = false;
- if (host->pagesize_2k)
- command = NAND_CMD_READ0; /* only READ0 is valid */
- break;
-
- case NAND_CMD_SEQIN:
- if (column >= mtd->writesize) {
- /*
- * FIXME: before send SEQIN command for write OOB,
- * We must read one page out.
- * For K9F1GXX has no READ1 command to set current HW
- * pointer to spare area, we must write the whole page
- * including OOB together.
- */
- if (host->pagesize_2k)
- /* call ourself to read a page */
- mxc_nand_command(mtd, NAND_CMD_READ0, 0,
- page_addr);
-
- host->col_addr = column - mtd->writesize;
- host->spare_only = true;
-
- /* Set program pointer to spare region */
- if (!host->pagesize_2k)
- send_cmd(host, NAND_CMD_READOOB, false);
- } else {
- host->spare_only = false;
- host->col_addr = column;
-
- /* Set program pointer to page start */
- if (!host->pagesize_2k)
- send_cmd(host, NAND_CMD_READ0, false);
- }
- useirq = false;
- break;
-
- case NAND_CMD_PAGEPROG:
- send_prog_page(host, 0, host->spare_only);
-
- if (host->pagesize_2k) {
- /* data in 4 areas datas */
- send_prog_page(host, 1, host->spare_only);
- send_prog_page(host, 2, host->spare_only);
- send_prog_page(host, 3, host->spare_only);
- }
-
- break;
+ struct nand_chip *this = mtd->priv;
+ struct mxc_nand_host *host = this->priv;
+ u16 i, j;
+ u16 n = mtd->writesize >> 9;
+ u8 *d = host->data_buf + mtd->writesize;
+ u8 *s = host->spare0;
+ u16 t = host->spare_len;
+
+ j = (mtd->oobsize / n >> 1) << 1;
+
+ if (bfrom) {
+ for (i = 0; i < n - 1; i++)
+ memcpy(d + i * j, s + i * t, j);
+
+ /* the last section */
+ memcpy(d + i * j, s + i * t, mtd->oobsize - i * j);
+ } else {
+ for (i = 0; i < n - 1; i++)
+ memcpy(&s[i * t], &d[i * j], j);
- case NAND_CMD_ERASE1:
- useirq = false;
- break;
+ /* the last section */
+ memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j);
}
+}
- /* Write out the command to the device. */
- send_cmd(host, command, useirq);
+static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
/* Write out column address, if necessary */
if (column != -1) {
@@ -791,7 +511,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
* the full page.
*/
send_addr(host, 0, page_addr == -1);
- if (host->pagesize_2k)
+ if (mtd->writesize > 512)
/* another col addr cycle for 2k page */
send_addr(host, 0, false);
}
@@ -801,7 +521,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/* paddr_0 - p_addr_7 */
send_addr(host, (page_addr & 0xff), false);
- if (host->pagesize_2k) {
+ if (mtd->writesize > 512) {
if (mtd->size >= 0x10000000) {
/* paddr_8 - paddr_15 */
send_addr(host, (page_addr >> 8) & 0xff, false);
@@ -820,52 +540,136 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
send_addr(host, (page_addr >> 8) & 0xff, true);
}
}
+}
+
+/* Used by the upper layer to write command to NAND Flash for
+ * different operations to be carried out on NAND Flash */
+static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ DEBUG(MTD_DEBUG_LEVEL3,
+ "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ command, column, page_addr);
+
+ /* Reset command state information */
+ host->status_request = false;
- /* Command post-processing step */
+ /* Command pre-processing step */
switch (command) {
- case NAND_CMD_RESET:
+ case NAND_CMD_STATUS:
+ host->buf_start = 0;
+ host->status_request = true;
+
+ send_cmd(host, command, true);
+ mxc_do_addr_cycle(mtd, column, page_addr);
break;
- case NAND_CMD_READOOB:
case NAND_CMD_READ0:
- if (host->pagesize_2k) {
- /* send read confirm command */
+ case NAND_CMD_READOOB:
+ if (command == NAND_CMD_READ0)
+ host->buf_start = column;
+ else
+ host->buf_start = column + mtd->writesize;
+
+ if (mtd->writesize > 512)
+ command = NAND_CMD_READ0; /* only READ0 is valid */
+
+ send_cmd(host, command, false);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+
+ if (mtd->writesize > 512)
send_cmd(host, NAND_CMD_READSTART, true);
- /* read for each AREA */
- send_read_page(host, 0, host->spare_only);
- send_read_page(host, 1, host->spare_only);
- send_read_page(host, 2, host->spare_only);
- send_read_page(host, 3, host->spare_only);
- } else
- send_read_page(host, 0, host->spare_only);
+
+ send_page(mtd, NFC_OUTPUT);
+
+ memcpy(host->data_buf, host->main_area0, mtd->writesize);
+ copy_spare(mtd, true);
break;
- case NAND_CMD_READID:
- host->col_addr = 0;
- send_read_id(host);
+ case NAND_CMD_SEQIN:
+ if (column >= mtd->writesize) {
+ /*
+ * FIXME: before send SEQIN command for write OOB,
+ * We must read one page out.
+ * For K9F1GXX has no READ1 command to set current HW
+ * pointer to spare area, we must write the whole page
+ * including OOB together.
+ */
+ if (mtd->writesize > 512)
+ /* call ourself to read a page */
+ mxc_nand_command(mtd, NAND_CMD_READ0, 0,
+ page_addr);
+
+ host->buf_start = column;
+
+ /* Set program pointer to spare region */
+ if (mtd->writesize == 512)
+ send_cmd(host, NAND_CMD_READOOB, false);
+ } else {
+ host->buf_start = column;
+
+ /* Set program pointer to page start */
+ if (mtd->writesize == 512)
+ send_cmd(host, NAND_CMD_READ0, false);
+ }
+
+ send_cmd(host, command, false);
+ mxc_do_addr_cycle(mtd, column, page_addr);
break;
case NAND_CMD_PAGEPROG:
+ memcpy(host->main_area0, host->data_buf, mtd->writesize);
+ copy_spare(mtd, false);
+ send_page(mtd, NFC_INPUT);
+ send_cmd(host, command, true);
+ mxc_do_addr_cycle(mtd, column, page_addr);
break;
- case NAND_CMD_STATUS:
+ case NAND_CMD_READID:
+ send_cmd(host, command, true);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ send_read_id(host);
+ host->buf_start = column;
break;
+ case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
+ send_cmd(host, command, false);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+
break;
}
}
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+/*
+ * The generic flash bbt decriptors overlap with our ecc
+ * hardware, so define some i.MX specific ones.
+ */
+static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
-static struct nand_bbt_descr smallpage_memorybased = {
- .options = NAND_BBT_SCAN2NDPAGE,
- .offs = 5,
- .len = 1,
- .pattern = scan_ff_pattern
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
};
static int __init mxcnd_probe(struct platform_device *pdev)
@@ -877,12 +681,16 @@ static int __init mxcnd_probe(struct platform_device *pdev)
struct resource *res;
uint16_t tmp;
int err = 0, nr_parts = 0;
+ struct nand_ecclayout *oob_smallpage, *oob_largepage;
/* Allocate memory for MTD device structure and private data */
- host = kzalloc(sizeof(struct mxc_nand_host), GFP_KERNEL);
+ host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
+ NAND_MAX_OOBSIZE, GFP_KERNEL);
if (!host)
return -ENOMEM;
+ host->data_buf = (uint8_t *)(host + 1);
+
host->dev = &pdev->dev;
/* structures must be linked */
this = &host->nand;
@@ -890,7 +698,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
mtd->priv = this;
mtd->owner = THIS_MODULE;
mtd->dev.parent = &pdev->dev;
- mtd->name = "mxc_nand";
+ mtd->name = DRIVER_NAME;
/* 50 us command delay time */
this->chip_delay = 5;
@@ -920,62 +728,93 @@ static int __init mxcnd_probe(struct platform_device *pdev)
goto eres;
}
- host->regs = ioremap(res->start, res->end - res->start + 1);
- if (!host->regs) {
+ host->base = ioremap(res->start, resource_size(res));
+ if (!host->base) {
err = -ENOMEM;
goto eres;
}
+ host->main_area0 = host->base;
+ host->main_area1 = host->base + 0x200;
+
+ if (nfc_is_v21()) {
+ host->regs = host->base + 0x1000;
+ host->spare0 = host->base + 0x1000;
+ host->spare_len = 64;
+ oob_smallpage = &nandv2_hw_eccoob_smallpage;
+ oob_largepage = &nandv2_hw_eccoob_largepage;
+ } else if (nfc_is_v1()) {
+ host->regs = host->base;
+ host->spare0 = host->base + 0x800;
+ host->spare_len = 16;
+ oob_smallpage = &nandv1_hw_eccoob_smallpage;
+ oob_largepage = &nandv1_hw_eccoob_largepage;
+ } else
+ BUG();
+
+ /* disable interrupt and spare enable */
tmp = readw(host->regs + NFC_CONFIG1);
tmp |= NFC_INT_MSK;
+ tmp &= ~NFC_SP_EN;
writew(tmp, host->regs + NFC_CONFIG1);
init_waitqueue_head(&host->irq_waitq);
host->irq = platform_get_irq(pdev, 0);
- err = request_irq(host->irq, mxc_nfc_irq, 0, "mxc_nd", host);
+ err = request_irq(host->irq, mxc_nfc_irq, 0, DRIVER_NAME, host);
if (err)
goto eirq;
+ /* Reset NAND */
+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+ /* preset operation */
+ /* Unlock the internal RAM Buffer */
+ writew(0x2, host->regs + NFC_CONFIG);
+
+ /* Blocks to be unlocked */
+ if (nfc_is_v21()) {
+ writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
+ writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
+ this->ecc.bytes = 9;
+ } else if (nfc_is_v1()) {
+ writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
+ writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
+ this->ecc.bytes = 3;
+ } else
+ BUG();
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, host->regs + NFC_WRPROT);
+
+ this->ecc.size = 512;
+ this->ecc.layout = oob_smallpage;
+
if (pdata->hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
this->ecc.correct = mxc_nand_correct_data;
this->ecc.mode = NAND_ECC_HW;
- this->ecc.size = 512;
- this->ecc.bytes = 3;
tmp = readw(host->regs + NFC_CONFIG1);
tmp |= NFC_ECC_EN;
writew(tmp, host->regs + NFC_CONFIG1);
} else {
- this->ecc.size = 512;
- this->ecc.bytes = 3;
- this->ecc.layout = &nand_hw_eccoob_8;
this->ecc.mode = NAND_ECC_SOFT;
tmp = readw(host->regs + NFC_CONFIG1);
tmp &= ~NFC_ECC_EN;
writew(tmp, host->regs + NFC_CONFIG1);
}
- /* Reset NAND */
- this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-
- /* preset operation */
- /* Unlock the internal RAM Buffer */
- writew(0x2, host->regs + NFC_CONFIG);
-
- /* Blocks to be unlocked */
- writew(0x0, host->regs + NFC_UNLOCKSTART_BLKADDR);
- writew(0x4000, host->regs + NFC_UNLOCKEND_BLKADDR);
-
- /* Unlock Block Command for given address range */
- writew(0x4, host->regs + NFC_WRPROT);
-
/* NAND bus width determines access funtions used by upper layer */
- if (pdata->width == 2) {
+ if (pdata->width == 2)
this->options |= NAND_BUSWIDTH_16;
- this->ecc.layout = &nand_hw_eccoob_16;
+
+ if (pdata->flash_bbt) {
+ this->bbt_td = &bbt_main_descr;
+ this->bbt_md = &bbt_mirror_descr;
+ /* update flash based bbt */
+ this->options |= NAND_USE_FLASH_BBT;
}
/* first scan to find the device and get the page size */
@@ -984,38 +823,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
goto escan;
}
- if (mtd->writesize == 2048) {
- host->pagesize_2k = 1;
- this->badblock_pattern = &smallpage_memorybased;
- }
-
- if (this->ecc.mode == NAND_ECC_HW) {
- switch (mtd->oobsize) {
- case 8:
- this->ecc.layout = &nand_hw_eccoob_8;
- break;
- case 16:
- this->ecc.layout = &nand_hw_eccoob_16;
- break;
- case 64:
- this->ecc.layout = &nand_hw_eccoob_64;
- break;
- default:
- /* page size not handled by HW ECC */
- /* switching back to soft ECC */
- this->ecc.size = 512;
- this->ecc.bytes = 3;
- this->ecc.layout = &nand_hw_eccoob_8;
- this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.calculate = NULL;
- this->ecc.correct = NULL;
- this->ecc.hwctl = NULL;
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_ECC_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
- break;
- }
- }
+ if (mtd->writesize == 2048)
+ this->ecc.layout = oob_largepage;
/* second phase scan */
if (nand_scan_tail(mtd)) {
@@ -1043,7 +852,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
escan:
free_irq(host->irq, host);
eirq:
- iounmap(host->regs);
+ iounmap(host->base);
eres:
clk_put(host->clk);
eclk:
@@ -1062,7 +871,7 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
nand_release(&host->mtd);
free_irq(host->irq, host);
- iounmap(host->regs);
+ iounmap(host->base);
kfree(host);
return 0;
@@ -1113,7 +922,7 @@ static struct platform_driver mxcnd_driver = {
.driver = {
.name = DRIVER_NAME,
},
- .remove = __exit_p(mxcnd_remove),
+ .remove = __devexit_p(mxcnd_remove),
.suspend = mxcnd_suspend,
.resume = mxcnd_resume,
};