1 files changed, 0 insertions, 149 deletions
diff --git a/drivers/mtd/nand/nand_bcm_umi.c b/drivers/mtd/nand/nand_bcm_umi.c
deleted file mode 100644
index 46a6bc9c4b7..00000000000
--- a/drivers/mtd/nand/nand_bcm_umi.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/reg_umi.h>
-#include "nand_bcm_umi.h"
-#ifdef BOOT0_BUILD
-#include <uart.h>
-#endif
-
-/* ---- External Variable Declarations ----------------------------------- */
-/* ---- External Function Prototypes ------------------------------------- */
-/* ---- Public Variables ------------------------------------------------- */
-/* ---- Private Constants and Types -------------------------------------- */
-/* ---- Private Function Prototypes -------------------------------------- */
-/* ---- Private Variables ------------------------------------------------ */
-/* ---- Private Functions ------------------------------------------------ */
-
-#if NAND_ECC_BCH
-/****************************************************************************
-*  nand_bch_ecc_flip_bit - Routine to flip an errored bit
-*
-*  PURPOSE:
-*     This is a helper routine that flips the bit (0 -> 1 or 1 -> 0) of the
-*     errored bit specified
-*
-*  PARAMETERS:
-*     datap - Container that holds the 512 byte data
-*     errorLocation - Location of the bit that needs to be flipped
-*
-*  RETURNS:
-*     None
-****************************************************************************/
-static void nand_bcm_umi_bch_ecc_flip_bit(uint8_t *datap, int errorLocation)
-{
-	int locWithinAByte = (errorLocation & REG_UMI_BCH_ERR_LOC_BYTE) >> 0;
-	int locWithinAWord = (errorLocation & REG_UMI_BCH_ERR_LOC_WORD) >> 3;
-	int locWithinAPage = (errorLocation & REG_UMI_BCH_ERR_LOC_PAGE) >> 5;
-
-	uint8_t errorByte = 0;
-	uint8_t byteMask = 1 << locWithinAByte;
-
-	/* BCH uses big endian, need to change the location
-	 * bits to little endian */
-	locWithinAWord = 3 - locWithinAWord;
-
-	errorByte = datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord];
-
-#ifdef BOOT0_BUILD
-	puthexs("\nECC Correct Offset: ",
-		locWithinAPage * sizeof(uint32_t) + locWithinAWord);
-	puthexs(" errorByte:", errorByte);
-	puthex8(" Bit: ", locWithinAByte);
-#endif
-
-	if (errorByte & byteMask) {
-		/* bit needs to be cleared */
-		errorByte &= ~byteMask;
-	} else {
-		/* bit needs to be set */
-		errorByte |= byteMask;
-	}
-
-	/* write back the value with the fixed bit */
-	datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord] = errorByte;
-}
-
-/****************************************************************************
-*  nand_correct_page_bch - Routine to correct bit errors when reading NAND
-*
-*  PURPOSE:
-*     This routine reads the BCH registers to determine if there are any bit
-*     errors during the read of the last 512 bytes of data + ECC bytes.  If
-*     errors exists, the routine fixes it.
-*
-*  PARAMETERS:
-*     datap - Container that holds the 512 byte data
-*
-*  RETURNS:
-*     0 or greater = Number of errors corrected
-*                    (No errors are found or errors have been fixed)
-*    -1 = Error(s) cannot be fixed
-****************************************************************************/
-int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData,
-				  int numEccBytes)
-{
-	int numErrors;
-	int errorLocation;
-	int idx;
-	uint32_t regValue;
-
-	/* wait for read ECC to be valid */
-	regValue = nand_bcm_umi_bch_poll_read_ecc_calc();
-
-	/*
-	 * read the control status register to determine if there
-	 * are error'ed bits
-	 * see if errors are correctible
-	 */
-	if ((regValue & REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR) > 0) {
-		int i;
-
-		for (i = 0; i < numEccBytes; i++) {
-			if (readEccData[i] != 0xff) {
-				/* errors cannot be fixed, return -1 */
-				return -1;
-			}
-		}
-		/* If ECC is unprogrammed then we can't correct,
-		 * assume everything OK */
-		return 0;
-	}
-
-	if ((regValue & REG_UMI_BCH_CTRL_STATUS_CORR_ERR) == 0) {
-		/* no errors */
-		return 0;
-	}
-
-	/*
-	 * Fix errored bits by doing the following:
-	 * 1. Read the number of errors in the control and status register
-	 * 2. Read the error location registers that corresponds to the number
-	 *    of errors reported
-	 * 3. Invert the bit in the data
-	 */
-	numErrors = (regValue & REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR) >> 20;
-
-	for (idx = 0; idx < numErrors; idx++) {
-		errorLocation =
-		    REG_UMI_BCH_ERR_LOC_ADDR(idx) & REG_UMI_BCH_ERR_LOC_MASK;
-
-		/* Flip bit */
-		nand_bcm_umi_bch_ecc_flip_bit(datap, errorLocation);
-	}
-	/* Errors corrected */
-	return numErrors;
-}
-#endif