diff options
Diffstat (limited to 'drivers/mtd/nand/nandsim.c')
-rw-r--r-- | drivers/mtd/nand/nandsim.c | 103 |
1 files changed, 68 insertions, 35 deletions
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index bb885d1fcab..556e8131ecd 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -21,8 +21,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA - * - * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $ */ #include <linux/init.h> @@ -30,6 +28,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/vmalloc.h> +#include <asm/div64.h> #include <linux/slab.h> #include <linux/errno.h> #include <linux/string.h> @@ -39,6 +38,7 @@ #include <linux/delay.h> #include <linux/list.h> #include <linux/random.h> +#include <asm/div64.h> /* Default simulator parameters values */ #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \ @@ -208,13 +208,16 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I #define STATE_CMD_READID 0x0000000A /* read ID */ #define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */ #define STATE_CMD_RESET 0x0000000C /* reset */ +#define STATE_CMD_RNDOUT 0x0000000D /* random output command */ +#define STATE_CMD_RNDOUTSTART 0x0000000E /* random output start command */ #define STATE_CMD_MASK 0x0000000F /* command states mask */ /* After an address is input, the simulator goes to one of these states */ #define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */ #define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */ -#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */ -#define STATE_ADDR_MASK 0x00000030 /* address states mask */ +#define STATE_ADDR_COLUMN 0x00000030 /* column address was accepted */ +#define STATE_ADDR_ZERO 0x00000040 /* one byte zero address was accepted */ +#define STATE_ADDR_MASK 0x00000070 /* address states mask */ /* Durind data input/output the simulator is in these states */ #define STATE_DATAIN 0x00000100 /* waiting for data input */ @@ -241,7 +244,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I #define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */ #define ACTION_MASK 0x00700000 /* action mask */ -#define NS_OPER_NUM 12 /* Number of operations supported by the simulator */ +#define NS_OPER_NUM 13 /* Number of operations supported by the simulator */ #define NS_OPER_STATES 6 /* Maximum number of states in operation */ #define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */ @@ -298,11 +301,11 @@ struct nandsim { /* NAND flash "geometry" */ struct nandsin_geometry { - uint32_t totsz; /* total flash size, bytes */ + uint64_t totsz; /* total flash size, bytes */ uint32_t secsz; /* flash sector (erase block) size, bytes */ uint pgsz; /* NAND flash page size, bytes */ uint oobsz; /* page OOB area size, bytes */ - uint32_t totszoob; /* total flash size including OOB, bytes */ + uint64_t totszoob; /* total flash size including OOB, bytes */ uint pgszoob; /* page size including OOB , bytes*/ uint secszoob; /* sector size including OOB, bytes */ uint pgnum; /* total number of pages */ @@ -374,7 +377,10 @@ static struct nandsim_operations { {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}}, /* Large page devices read page */ {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY, - STATE_DATAOUT, STATE_READY}} + STATE_DATAOUT, STATE_READY}}, + /* Large page devices random page read */ + {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY, + STATE_DATAOUT, STATE_READY}}, }; struct weak_block { @@ -459,6 +465,12 @@ static char *get_partition_name(int i) return kstrdup(buf, GFP_KERNEL); } +static u_int64_t divide(u_int64_t n, u_int32_t d) +{ + do_div(n, d); + return n; +} + /* * Initialize the nandsim structure. * @@ -469,8 +481,8 @@ static int init_nandsim(struct mtd_info *mtd) struct nand_chip *chip = (struct nand_chip *)mtd->priv; struct nandsim *ns = (struct nandsim *)(chip->priv); int i, ret = 0; - u_int32_t remains; - u_int32_t next_offset; + u_int64_t remains; + u_int64_t next_offset; if (NS_IS_INITIALIZED(ns)) { NS_ERR("init_nandsim: nandsim is already initialized\n"); @@ -487,8 +499,8 @@ static int init_nandsim(struct mtd_info *mtd) ns->geom.oobsz = mtd->oobsize; ns->geom.secsz = mtd->erasesize; ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz; - ns->geom.pgnum = ns->geom.totsz / ns->geom.pgsz; - ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz; + ns->geom.pgnum = divide(ns->geom.totsz, ns->geom.pgsz); + ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz; ns->geom.secshift = ffs(ns->geom.secsz) - 1; ns->geom.pgshift = chip->page_shift; ns->geom.oobshift = ffs(ns->geom.oobsz) - 1; @@ -511,7 +523,7 @@ static int init_nandsim(struct mtd_info *mtd) } if (ns->options & OPT_SMALLPAGE) { - if (ns->geom.totsz < (32 << 20)) { + if (ns->geom.totsz <= (32 << 20)) { ns->geom.pgaddrbytes = 3; ns->geom.secaddrbytes = 2; } else { @@ -537,15 +549,16 @@ static int init_nandsim(struct mtd_info *mtd) remains = ns->geom.totsz; next_offset = 0; for (i = 0; i < parts_num; ++i) { - unsigned long part = parts[i]; - if (!part || part > remains / ns->geom.secsz) { + u_int64_t part_sz = (u_int64_t)parts[i] * ns->geom.secsz; + + if (!part_sz || part_sz > remains) { NS_ERR("bad partition size.\n"); ret = -EINVAL; goto error; } ns->partitions[i].name = get_partition_name(i); ns->partitions[i].offset = next_offset; - ns->partitions[i].size = part * ns->geom.secsz; + ns->partitions[i].size = part_sz; next_offset += ns->partitions[i].size; remains -= ns->partitions[i].size; } @@ -573,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd) if (ns->busw == 16) NS_WARN("16-bit flashes support wasn't tested\n"); - printk("flash size: %u MiB\n", ns->geom.totsz >> 20); + printk("flash size: %llu MiB\n", + (unsigned long long)ns->geom.totsz >> 20); printk("page size: %u bytes\n", ns->geom.pgsz); printk("OOB area size: %u bytes\n", ns->geom.oobsz); printk("sector size: %u KiB\n", ns->geom.secsz >> 10); @@ -582,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd) printk("bus width: %u\n", ns->busw); printk("bits in sector size: %u\n", ns->geom.secshift); printk("bits in page size: %u\n", ns->geom.pgshift); - printk("bits in OOB size: %u\n", ns->geom.oobshift); - printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10); + printk("bits in OOB size: %u\n", ns->geom.oobshift); + printk("flash size with OOB: %llu KiB\n", + (unsigned long long)ns->geom.totszoob >> 10); printk("page address bytes: %u\n", ns->geom.pgaddrbytes); printk("sector address bytes: %u\n", ns->geom.secaddrbytes); printk("options: %#x\n", ns->options); @@ -825,7 +840,7 @@ static int setup_wear_reporting(struct mtd_info *mtd) if (!rptwear) return 0; - wear_eb_count = mtd->size / mtd->erasesize; + wear_eb_count = divide(mtd->size, mtd->erasesize); mem = wear_eb_count * sizeof(unsigned long); if (mem / sizeof(unsigned long) != wear_eb_count) { NS_ERR("Too many erase blocks for wear reporting\n"); @@ -931,12 +946,18 @@ static char *get_state_name(uint32_t state) return "STATE_CMD_ERASE2"; case STATE_CMD_RESET: return "STATE_CMD_RESET"; + case STATE_CMD_RNDOUT: + return "STATE_CMD_RNDOUT"; + case STATE_CMD_RNDOUTSTART: + return "STATE_CMD_RNDOUTSTART"; case STATE_ADDR_PAGE: return "STATE_ADDR_PAGE"; case STATE_ADDR_SEC: return "STATE_ADDR_SEC"; case STATE_ADDR_ZERO: return "STATE_ADDR_ZERO"; + case STATE_ADDR_COLUMN: + return "STATE_ADDR_COLUMN"; case STATE_DATAIN: return "STATE_DATAIN"; case STATE_DATAOUT: @@ -967,6 +988,7 @@ static int check_command(int cmd) switch (cmd) { case NAND_CMD_READ0: + case NAND_CMD_READ1: case NAND_CMD_READSTART: case NAND_CMD_PAGEPROG: case NAND_CMD_READOOB: @@ -976,7 +998,8 @@ static int check_command(int cmd) case NAND_CMD_READID: case NAND_CMD_ERASE2: case NAND_CMD_RESET: - case NAND_CMD_READ1: + case NAND_CMD_RNDOUT: + case NAND_CMD_RNDOUTSTART: return 0; case NAND_CMD_STATUS_MULTI: @@ -1015,6 +1038,10 @@ static uint32_t get_state_by_command(unsigned command) return STATE_CMD_ERASE2; case NAND_CMD_RESET: return STATE_CMD_RESET; + case NAND_CMD_RNDOUT: + return STATE_CMD_RNDOUT; + case NAND_CMD_RNDOUTSTART: + return STATE_CMD_RNDOUTSTART; } NS_ERR("get_state_by_command: unknown command, BUG\n"); @@ -1576,6 +1603,11 @@ static void switch_state(struct nandsim *ns) ns->regs.num = 1; break; + case STATE_ADDR_COLUMN: + /* Column address is always 2 bytes */ + ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes; + break; + default: NS_ERR("switch_state: BUG! unknown address state\n"); } @@ -1687,15 +1719,21 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) return; } - /* - * Chip might still be in STATE_DATAOUT - * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or - * STATE_DATAOUT_STATUS_M state. If so, switch state. - */ + /* Check that the command byte is correct */ + if (check_command(byte)) { + NS_ERR("write_byte: unknown command %#x\n", (uint)byte); + return; + } + if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M - || ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT)) + || NS_STATE(ns->state) == STATE_DATAOUT) { + int row = ns->regs.row; + switch_state(ns); + if (byte == NAND_CMD_RNDOUT) + ns->regs.row = row; + } /* Check if chip is expecting command */ if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) { @@ -1709,12 +1747,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); } - /* Check that the command byte is correct */ - if (check_command(byte)) { - NS_ERR("write_byte: unknown command %#x\n", (uint)byte); - return; - } - NS_DBG("command byte corresponding to %s state accepted\n", get_state_name(get_state_by_command(byte))); ns->regs.command = byte; @@ -2013,7 +2045,7 @@ static int __init ns_init_module(void) } if (overridesize) { - u_int32_t new_size = nsmtd->erasesize << overridesize; + u_int64_t new_size = (u_int64_t)nsmtd->erasesize << overridesize; if (new_size >> overridesize != nsmtd->erasesize) { NS_ERR("overridesize is too big\n"); goto err_exit; @@ -2021,7 +2053,8 @@ static int __init ns_init_module(void) /* N.B. This relies on nand_scan not doing anything with the size before we change it */ nsmtd->size = new_size; chip->chipsize = new_size; - chip->chip_shift = ffs(new_size) - 1; + chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1; + chip->pagemask = (chip->chipsize >> chip->page_shift) - 1; } if ((retval = setup_wear_reporting(nsmtd)) != 0) |