diff options
Diffstat (limited to 'drivers/mtd/nand/omap2.c')
| -rw-r--r-- | drivers/mtd/nand/omap2.c | 69 |
1 files changed, 41 insertions, 28 deletions
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index f7772500990..bf642ceef68 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1633,6 +1633,7 @@ static int omap_nand_probe(struct platform_device *pdev) int i; dma_cap_mask_t mask; unsigned sig; + unsigned oob_index; struct resource *res; struct mtd_part_parser_data ppdata = {}; @@ -1730,13 +1731,7 @@ static int omap_nand_probe(struct platform_device *pdev) break; case NAND_OMAP_POLLED: - if (nand_chip->options & NAND_BUSWIDTH_16) { - nand_chip->read_buf = omap_read_buf16; - nand_chip->write_buf = omap_write_buf16; - } else { - nand_chip->read_buf = omap_read_buf8; - nand_chip->write_buf = omap_write_buf8; - } + /* Use nand_base defaults for {read,write}_buf */ break; case NAND_OMAP_PREFETCH_DMA: @@ -1832,11 +1827,14 @@ static int omap_nand_probe(struct platform_device *pdev) (mtd->writesize / nand_chip->ecc.size); if (nand_chip->options & NAND_BUSWIDTH_16) - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + oob_index = BADBLOCK_MARKER_LENGTH; else - ecclayout->eccpos[0] = 1; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + oob_index = 1; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; + /* no reserved-marker in ecclayout for this ecc-scheme */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; break; case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: @@ -1853,9 +1851,15 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccbytes = nand_chip->ecc.bytes * (mtd->writesize / nand_chip->ecc.size); - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) { + ecclayout->eccpos[i] = oob_index; + if (((i + 1) % nand_chip->ecc.bytes) == 0) + oob_index++; + } + /* include reserved-marker in ecclayout->oobfree calculation */ + ecclayout->oobfree->offset = 1 + + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; /* software bch library is used for locating errors */ nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, @@ -1889,9 +1893,12 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccbytes = nand_chip->ecc.bytes * (mtd->writesize / nand_chip->ecc.size); - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; + /* reserved marker already included in ecclayout->eccbytes */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; /* This ECC scheme requires ELM H/W block */ if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) { pr_err("nand: error: could not initialize ELM\n"); @@ -1919,9 +1926,15 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccbytes = nand_chip->ecc.bytes * (mtd->writesize / nand_chip->ecc.size); - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) { + ecclayout->eccpos[i] = oob_index; + if (((i + 1) % nand_chip->ecc.bytes) == 0) + oob_index++; + } + /* include reserved-marker in ecclayout->oobfree calculation */ + ecclayout->oobfree->offset = 1 + + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; /* software bch library is used for locating errors */ nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, @@ -1962,9 +1975,12 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccbytes = nand_chip->ecc.bytes * (mtd->writesize / nand_chip->ecc.size); - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; + /* reserved marker already included in ecclayout->eccbytes */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; break; #else pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); @@ -1978,11 +1994,8 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } - /* populate remaining ECC layout data */ - ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH + - ecclayout->eccbytes); - for (i = 1; i < ecclayout->eccbytes; i++) - ecclayout->eccpos[i] = ecclayout->eccpos[0] + i; + /* all OOB bytes from oobfree->offset till end off OOB are free */ + ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset; /* check if NAND device's OOB is enough to store ECC signatures */ if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) { pr_err("not enough OOB bytes required = %d, available=%d\n", |