diff options
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r-- | drivers/mtd/nand/nand_base.c | 16 | ||||
-rw-r--r-- | drivers/mtd/nand/ndfc.c | 6 | ||||
-rw-r--r-- | drivers/mtd/nand/s3c2410.c | 164 | ||||
-rw-r--r-- | drivers/mtd/nand/ts7250.c | 2 |
4 files changed, 127 insertions, 61 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 27083ed0a01..80a76654d96 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1176,7 +1176,7 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, status = chip->waitfunc(mtd, chip); - return status; + return status & NAND_STATUS_FAIL ? -EIO : 0; } /** @@ -1271,10 +1271,6 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd); buf = nand_transfer_oob(chip, buf, ops); - readlen -= ops->ooblen; - if (!readlen) - break; - if (!(chip->options & NAND_NO_READRDY)) { /* * Apply delay or wait for ready/busy pin. Do this @@ -1288,6 +1284,10 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, nand_wait_ready(mtd); } + readlen -= ops->ooblen; + if (!readlen) + break; + /* Increment page address */ realpage++; @@ -1610,13 +1610,13 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, if (!writelen) return 0; + chipnr = (int)(to >> chip->chip_shift); + chip->select_chip(mtd, chipnr); + /* Check, if it is write protected */ if (nand_check_wp(mtd)) return -EIO; - chipnr = (int)(to >> chip->chip_shift); - chip->select_chip(mtd, chipnr); - realpage = (int)(to >> chip->page_shift); page = realpage & chip->pagemask; blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index fe8d38514ba..e5bd88f2d56 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -61,15 +61,15 @@ static void ndfc_select_chip(struct mtd_info *mtd, int chip) static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *chip = mtd->priv; + struct ndfc_controller *ndfc = &ndfc_ctrl; if (cmd == NAND_CMD_NONE) return; if (ctrl & NAND_CLE) - writel(cmd & 0xFF, chip->IO_ADDR_W + NDFC_CMD); + writel(cmd & 0xFF, ndfc->ndfcbase + NDFC_CMD); else - writel(cmd & 0xFF, chip->IO_ADDR_W + NDFC_ALE); + writel(cmd & 0xFF, ndfc->ndfcbase + NDFC_ALE); } static int ndfc_ready(struct mtd_info *mtd) diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 2c262fe03d8..ff5cef24d5b 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -63,8 +63,6 @@ #include <asm/arch/regs-nand.h> #include <asm/arch/nand.h> -#define PFX "s3c2410-nand: " - #ifdef CONFIG_MTD_NAND_S3C2410_HWECC static int hardware_ecc = 1; #else @@ -99,6 +97,12 @@ struct s3c2410_nand_mtd { int scan_res; }; +enum s3c_cpu_type { + TYPE_S3C2410, + TYPE_S3C2412, + TYPE_S3C2440, +}; + /* overview of the s3c2410 nand state */ struct s3c2410_nand_info { @@ -112,9 +116,11 @@ struct s3c2410_nand_info { struct resource *area; struct clk *clk; void __iomem *regs; + void __iomem *sel_reg; + int sel_bit; int mtd_count; - unsigned char is_s3c2440; + enum s3c_cpu_type cpu_type; }; /* conversion functions */ @@ -148,7 +154,7 @@ static inline int allow_clk_stop(struct s3c2410_nand_info *info) #define NS_IN_KHZ 1000000 -static int s3c2410_nand_calc_rate(int wanted, unsigned long clk, int max) +static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) { int result; @@ -172,53 +178,58 @@ static int s3c2410_nand_calc_rate(int wanted, unsigned long clk, int max) /* controller setup */ -static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, struct platform_device *pdev) +static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, + struct platform_device *pdev) { struct s3c2410_platform_nand *plat = to_nand_plat(pdev); unsigned long clkrate = clk_get_rate(info->clk); + int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4; int tacls, twrph0, twrph1; - unsigned long cfg; + unsigned long cfg = 0; /* calculate the timing information for the controller */ clkrate /= 1000; /* turn clock into kHz for ease of use */ if (plat != NULL) { - tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4); - twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8); - twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8); + tacls = s3c_nand_calc_rate(plat->tacls, clkrate, tacls_max); + twrph0 = s3c_nand_calc_rate(plat->twrph0, clkrate, 8); + twrph1 = s3c_nand_calc_rate(plat->twrph1, clkrate, 8); } else { /* default timings */ - tacls = 4; + tacls = tacls_max; twrph0 = 8; twrph1 = 8; } if (tacls < 0 || twrph0 < 0 || twrph1 < 0) { - printk(KERN_ERR PFX "cannot get timings suitable for board\n"); + dev_err(info->device, "cannot get suitable timings\n"); return -EINVAL; } - printk(KERN_INFO PFX "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n", + dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n", tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate)); - if (!info->is_s3c2440) { + switch (info->cpu_type) { + case TYPE_S3C2410: cfg = S3C2410_NFCONF_EN; cfg |= S3C2410_NFCONF_TACLS(tacls - 1); cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); - } else { + break; + + case TYPE_S3C2440: + case TYPE_S3C2412: cfg = S3C2440_NFCONF_TACLS(tacls - 1); cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1); cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1); /* enable the controller and de-assert nFCE */ - writel(S3C2440_NFCONT_ENABLE | S3C2440_NFCONT_ENABLE, - info->regs + S3C2440_NFCONT); + writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT); } - pr_debug(PFX "NF_CONF is 0x%lx\n", cfg); + dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg); writel(cfg, info->regs + S3C2410_NFCONF); return 0; @@ -231,26 +242,21 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) struct s3c2410_nand_info *info; struct s3c2410_nand_mtd *nmtd; struct nand_chip *this = mtd->priv; - void __iomem *reg; unsigned long cur; - unsigned long bit; nmtd = this->priv; info = nmtd->info; - bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE; - reg = info->regs + ((info->is_s3c2440) ? S3C2440_NFCONT : S3C2410_NFCONF); - if (chip != -1 && allow_clk_stop(info)) clk_enable(info->clk); - cur = readl(reg); + cur = readl(info->sel_reg); if (chip == -1) { - cur |= bit; + cur |= info->sel_bit; } else { if (nmtd->set != NULL && chip > nmtd->set->nr_chips) { - printk(KERN_ERR PFX "chip %d out of range\n", chip); + dev_err(info->device, "invalid chip %d\n", chip); return; } @@ -259,10 +265,10 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) (info->platform->select_chip) (nmtd->set, chip); } - cur &= ~bit; + cur &= ~info->sel_bit; } - writel(cur, reg); + writel(cur, info->sel_reg); if (chip == -1 && allow_clk_stop(info)) clk_disable(info->clk); @@ -311,15 +317,25 @@ static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd, static int s3c2410_nand_devready(struct mtd_info *mtd) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); - - if (info->is_s3c2440) - return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY; return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY; } +static int s3c2440_nand_devready(struct mtd_info *mtd) +{ + struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); + return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY; +} + +static int s3c2412_nand_devready(struct mtd_info *mtd) +{ + struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); + return readb(info->regs + S3C2412_NFSTAT) & S3C2412_NFSTAT_READY; +} + /* ECC handling functions */ -static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) { pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", mtd, dat, read_ecc, calc_ecc); @@ -487,11 +503,8 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, struct s3c2410_nand_set *set) { struct nand_chip *chip = &nmtd->chip; + void __iomem *regs = info->regs; - chip->IO_ADDR_R = info->regs + S3C2410_NFDATA; - chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; - chip->cmd_ctrl = s3c2410_nand_hwcontrol; - chip->dev_ready = s3c2410_nand_devready; chip->write_buf = s3c2410_nand_write_buf; chip->read_buf = s3c2410_nand_read_buf; chip->select_chip = s3c2410_nand_select_chip; @@ -500,11 +513,37 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, chip->options = 0; chip->controller = &info->controller; - if (info->is_s3c2440) { - chip->IO_ADDR_R = info->regs + S3C2440_NFDATA; - chip->IO_ADDR_W = info->regs + S3C2440_NFDATA; - chip->cmd_ctrl = s3c2440_nand_hwcontrol; - } + switch (info->cpu_type) { + case TYPE_S3C2410: + chip->IO_ADDR_W = regs + S3C2410_NFDATA; + info->sel_reg = regs + S3C2410_NFCONF; + info->sel_bit = S3C2410_NFCONF_nFCE; + chip->cmd_ctrl = s3c2410_nand_hwcontrol; + chip->dev_ready = s3c2410_nand_devready; + break; + + case TYPE_S3C2440: + chip->IO_ADDR_W = regs + S3C2440_NFDATA; + info->sel_reg = regs + S3C2440_NFCONT; + info->sel_bit = S3C2440_NFCONT_nFCE; + chip->cmd_ctrl = s3c2440_nand_hwcontrol; + chip->dev_ready = s3c2440_nand_devready; + break; + + case TYPE_S3C2412: + chip->IO_ADDR_W = regs + S3C2440_NFDATA; + info->sel_reg = regs + S3C2440_NFCONT; + info->sel_bit = S3C2412_NFCONT_nFCE0; + chip->cmd_ctrl = s3c2440_nand_hwcontrol; + chip->dev_ready = s3c2412_nand_devready; + + if (readl(regs + S3C2410_NFCONF) & S3C2412_NFCONF_NANDBOOT) + dev_info(info->device, "System booted from NAND\n"); + + break; + } + + chip->IO_ADDR_R = chip->IO_ADDR_W; nmtd->info = info; nmtd->mtd.priv = chip; @@ -512,17 +551,25 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, nmtd->set = set; if (hardware_ecc) { - chip->ecc.correct = s3c2410_nand_correct_data; - chip->ecc.hwctl = s3c2410_nand_enable_hwecc; chip->ecc.calculate = s3c2410_nand_calculate_ecc; + chip->ecc.correct = s3c2410_nand_correct_data; chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = 512; chip->ecc.bytes = 3; chip->ecc.layout = &nand_hw_eccoob; - if (info->is_s3c2440) { - chip->ecc.hwctl = s3c2440_nand_enable_hwecc; - chip->ecc.calculate = s3c2440_nand_calculate_ecc; + switch (info->cpu_type) { + case TYPE_S3C2410: + chip->ecc.hwctl = s3c2410_nand_enable_hwecc; + chip->ecc.calculate = s3c2410_nand_calculate_ecc; + break; + + case TYPE_S3C2412: + case TYPE_S3C2440: + chip->ecc.hwctl = s3c2440_nand_enable_hwecc; + chip->ecc.calculate = s3c2440_nand_calculate_ecc; + break; + } } else { chip->ecc.mode = NAND_ECC_SOFT; @@ -537,7 +584,8 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, * nand layer to look for devices */ -static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440) +static int s3c24xx_nand_probe(struct platform_device *pdev, + enum s3c_cpu_type cpu_type) { struct s3c2410_platform_nand *plat = to_nand_plat(pdev); struct s3c2410_nand_info *info; @@ -592,7 +640,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440) info->device = &pdev->dev; info->platform = plat; info->regs = ioremap(res->start, size); - info->is_s3c2440 = is_s3c2440; + info->cpu_type = cpu_type; if (info->regs == NULL) { dev_err(&pdev->dev, "cannot reserve register region\n"); @@ -699,12 +747,17 @@ static int s3c24xx_nand_resume(struct platform_device *dev) static int s3c2410_nand_probe(struct platform_device *dev) { - return s3c24xx_nand_probe(dev, 0); + return s3c24xx_nand_probe(dev, TYPE_S3C2410); } static int s3c2440_nand_probe(struct platform_device *dev) { - return s3c24xx_nand_probe(dev, 1); + return s3c24xx_nand_probe(dev, TYPE_S3C2440); +} + +static int s3c2412_nand_probe(struct platform_device *dev) +{ + return s3c24xx_nand_probe(dev, TYPE_S3C2412); } static struct platform_driver s3c2410_nand_driver = { @@ -729,16 +782,29 @@ static struct platform_driver s3c2440_nand_driver = { }, }; +static struct platform_driver s3c2412_nand_driver = { + .probe = s3c2412_nand_probe, + .remove = s3c2410_nand_remove, + .suspend = s3c24xx_nand_suspend, + .resume = s3c24xx_nand_resume, + .driver = { + .name = "s3c2412-nand", + .owner = THIS_MODULE, + }, +}; + static int __init s3c2410_nand_init(void) { printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n"); + platform_driver_register(&s3c2412_nand_driver); platform_driver_register(&s3c2440_nand_driver); return platform_driver_register(&s3c2410_nand_driver); } static void __exit s3c2410_nand_exit(void) { + platform_driver_unregister(&s3c2412_nand_driver); platform_driver_unregister(&s3c2440_nand_driver); platform_driver_unregister(&s3c2410_nand_driver); } diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c index a0b4b1edcb0..f40081069ab 100644 --- a/drivers/mtd/nand/ts7250.c +++ b/drivers/mtd/nand/ts7250.c @@ -97,7 +97,7 @@ static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) unsigned long addr = TS72XX_NAND_CONTROL_VIRT_BASE; unsigned char bits; - bits = (ctrl & NAND_CNE) << 2; + bits = (ctrl & NAND_NCE) << 2; bits |= ctrl & NAND_CLE; bits |= (ctrl & NAND_ALE) >> 2; |