diff options
Diffstat (limited to 'drivers/mtd/ubi/ubi.h')
-rw-r--r-- | drivers/mtd/ubi/ubi.h | 90 |
1 files changed, 54 insertions, 36 deletions
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index c055511bb1b..6a5fe963378 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -36,6 +36,7 @@ #include <linux/device.h> #include <linux/string.h> #include <linux/vmalloc.h> +#include <linux/notifier.h> #include <linux/mtd/mtd.h> #include <linux/mtd/ubi.h> @@ -100,6 +101,28 @@ enum { UBI_IO_BITFLIPS }; +/* + * Return codes of the 'ubi_eba_copy_leb()' function. + * + * MOVE_CANCEL_RACE: canceled because the volume is being deleted, the source + * PEB was put meanwhile, or there is I/O on the source PEB + * MOVE_SOURCE_RD_ERR: canceled because there was a read error from the source + * PEB + * MOVE_TARGET_RD_ERR: canceled because there was a read error from the target + * PEB + * MOVE_TARGET_WR_ERR: canceled because there was a write error to the target + * PEB + * MOVE_CANCEL_BITFLIPS: canceled because a bit-flip was detected in the + * target PEB + */ +enum { + MOVE_CANCEL_RACE = 1, + MOVE_SOURCE_RD_ERR, + MOVE_TARGET_RD_ERR, + MOVE_TARGET_WR_ERR, + MOVE_CANCEL_BITFLIPS, +}; + /** * struct ubi_wl_entry - wear-leveling entry. * @u.rb: link in the corresponding (free/used) RB-tree @@ -208,10 +231,6 @@ struct ubi_volume_desc; * @changing_leb: %1 if the atomic LEB change ioctl command is in progress * @direct_writes: %1 if direct writes are enabled for this volume * - * @gluebi_desc: gluebi UBI volume descriptor - * @gluebi_refcount: reference count of the gluebi MTD device - * @gluebi_mtd: MTD device description object of the gluebi MTD device - * * The @corrupted field indicates that the volume's contents is corrupted. * Since UBI protects only static volumes, this field is not relevant to * dynamic volumes - it is user's responsibility to assure their data @@ -255,17 +274,6 @@ struct ubi_volume { unsigned int updating:1; unsigned int changing_leb:1; unsigned int direct_writes:1; - -#ifdef CONFIG_MTD_UBI_GLUEBI - /* - * Gluebi-related stuff may be compiled out. - * Note: this should not be built into UBI but should be a separate - * ubimtd driver which works on top of UBI and emulates MTD devices. - */ - struct ubi_volume_desc *gluebi_desc; - int gluebi_refcount; - struct mtd_info gluebi_mtd; -#endif }; /** @@ -293,6 +301,7 @@ struct ubi_wl_entry; * @vol->readers, @vol->writers, @vol->exclusive, * @vol->ref_count, @vol->mapping and @vol->eba_tbl. * @ref_count: count of references on the UBI device + * @image_seq: image sequence number recorded on EC headers * * @rsvd_pebs: count of reserved physical eraseblocks * @avail_pebs: count of available physical eraseblocks @@ -305,9 +314,9 @@ struct ubi_wl_entry; * @vtbl_slots: how many slots are available in the volume table * @vtbl_size: size of the volume table in bytes * @vtbl: in-RAM volume table copy - * @volumes_mutex: protects on-flash volume table and serializes volume - * changes, like creation, deletion, update, re-size, - * re-name and set property + * @device_mutex: protects on-flash volume table and serializes volume + * creation, deletion, update, re-size, re-name and set + * property * * @max_ec: current highest erase counter value * @mean_ec: current mean erase counter value @@ -318,14 +327,15 @@ struct ubi_wl_entry; * @alc_mutex: serializes "atomic LEB change" operations * * @used: RB-tree of used physical eraseblocks + * @erroneous: RB-tree of erroneous used physical eraseblocks * @free: RB-tree of free physical eraseblocks * @scrub: RB-tree of physical eraseblocks which need scrubbing * @pq: protection queue (contain physical eraseblocks which are temporarily * protected from the wear-leveling worker) * @pq_head: protection queue head * @wl_lock: protects the @used, @free, @pq, @pq_head, @lookuptbl, @move_from, - * @move_to, @move_to_put @erase_pending, @wl_scheduled and @works - * fields + * @move_to, @move_to_put @erase_pending, @wl_scheduled, @works, + * @erroneous, and @erroneous_peb_count fields * @move_mutex: serializes eraseblock moves * @work_sem: synchronizes the WL worker with use tasks * @wl_scheduled: non-zero if the wear-leveling was scheduled @@ -339,12 +349,15 @@ struct ubi_wl_entry; * @bgt_thread: background thread description object * @thread_enabled: if the background thread is enabled * @bgt_name: background thread name + * @reboot_notifier: notifier to terminate background thread before rebooting * * @flash_size: underlying MTD device size (in bytes) * @peb_count: count of physical eraseblocks on the MTD device * @peb_size: physical eraseblock size * @bad_peb_count: count of bad physical eraseblocks * @good_peb_count: count of good physical eraseblocks + * @erroneous_peb_count: count of erroneous physical eraseblocks in @erroneous + * @max_erroneous: maximum allowed amount of erroneous physical eraseblocks * @min_io_size: minimal input/output unit size of the underlying MTD device * @hdrs_min_io_size: minimal I/O unit size used for VID and EC headers * @ro_mode: if the UBI device is in read-only mode @@ -360,13 +373,13 @@ struct ubi_wl_entry; * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or * not + * @nor_flash: non-zero if working on top of NOR flash * @mtd: MTD device descriptor * * @peb_buf1: a buffer of PEB size used for different purposes * @peb_buf2: another buffer of PEB size used for different purposes * @buf_mutex: protects @peb_buf1 and @peb_buf2 * @ckvol_mutex: serializes static volume checking when opening - * @mult_mutex: serializes operations on multiple volumes, like re-naming * @dbg_peb_buf: buffer of PEB size used for debugging * @dbg_buf_mutex: protects @dbg_peb_buf */ @@ -379,6 +392,7 @@ struct ubi_device { struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT]; spinlock_t volumes_lock; int ref_count; + int image_seq; int rsvd_pebs; int avail_pebs; @@ -389,7 +403,7 @@ struct ubi_device { int vtbl_slots; int vtbl_size; struct ubi_vtbl_record *vtbl; - struct mutex volumes_mutex; + struct mutex device_mutex; int max_ec; /* Note, mean_ec is not updated run-time - should be fixed */ @@ -403,6 +417,7 @@ struct ubi_device { /* Wear-leveling sub-system's stuff */ struct rb_root used; + struct rb_root erroneous; struct rb_root free; struct rb_root scrub; struct list_head pq[UBI_PROT_QUEUE_LEN]; @@ -420,6 +435,7 @@ struct ubi_device { struct task_struct *bgt_thread; int thread_enabled; char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2]; + struct notifier_block reboot_notifier; /* I/O sub-system's stuff */ long long flash_size; @@ -427,6 +443,8 @@ struct ubi_device { int peb_size; int bad_peb_count; int good_peb_count; + int erroneous_peb_count; + int max_erroneous; int min_io_size; int hdrs_min_io_size; int ro_mode; @@ -437,15 +455,15 @@ struct ubi_device { int vid_hdr_offset; int vid_hdr_aloffset; int vid_hdr_shift; - int bad_allowed; + unsigned int bad_allowed:1; + unsigned int nor_flash:1; struct mtd_info *mtd; void *peb_buf1; void *peb_buf2; struct mutex buf_mutex; struct mutex ckvol_mutex; - struct mutex mult_mutex; -#ifdef CONFIG_MTD_UBI_DEBUG +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID void *dbg_peb_buf; struct mutex dbg_buf_mutex; #endif @@ -457,6 +475,7 @@ extern const struct file_operations ubi_cdev_operations; extern const struct file_operations ubi_vol_cdev_operations; extern struct class *ubi_class; extern struct mutex ubi_devices_mutex; +extern struct blocking_notifier_head ubi_notifiers; /* vtbl.c */ int ubi_change_vtbl_record(struct ubi_device *ubi, int idx, @@ -489,17 +508,6 @@ int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int ubi_check_volume(struct ubi_device *ubi, int vol_id); void ubi_calculate_reserved(struct ubi_device *ubi); -/* gluebi.c */ -#ifdef CONFIG_MTD_UBI_GLUEBI -int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol); -int ubi_destroy_gluebi(struct ubi_volume *vol); -void ubi_gluebi_updated(struct ubi_volume *vol); -#else -#define ubi_create_gluebi(ubi, vol) 0 -#define ubi_destroy_gluebi(vol) 0 -#define ubi_gluebi_updated(vol) -#endif - /* eba.c */ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum); @@ -549,6 +557,16 @@ struct ubi_device *ubi_get_device(int ubi_num); void ubi_put_device(struct ubi_device *ubi); struct ubi_device *ubi_get_by_major(int major); int ubi_major2num(int major); +int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol, + int ntype); +int ubi_notify_all(struct ubi_device *ubi, int ntype, + struct notifier_block *nb); +int ubi_enumerate_volumes(struct notifier_block *nb); + +/* kapi.c */ +void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di); +void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol, + struct ubi_volume_info *vi); /* * ubi_rb_for_each_entry - walk an RB-tree. |