diff options
Diffstat (limited to 'drivers/mtd/ubi')
| -rw-r--r-- | drivers/mtd/ubi/build.c | 3 | ||||
| -rw-r--r-- | drivers/mtd/ubi/eba.c | 49 | ||||
| -rw-r--r-- | drivers/mtd/ubi/io.c | 60 | ||||
| -rw-r--r-- | drivers/mtd/ubi/scan.c | 131 | ||||
| -rw-r--r-- | drivers/mtd/ubi/scan.h | 19 | ||||
| -rw-r--r-- | drivers/mtd/ubi/ubi.h | 10 |
6 files changed, 198 insertions, 74 deletions
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 13b05cb33b0..78ae89488a4 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -593,6 +593,7 @@ static int attach_by_scanning(struct ubi_device *ubi) ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count; ubi->max_ec = si->max_ec; ubi->mean_ec = si->mean_ec; + ubi_msg("max. sequence number: %llu", si->max_sqnum); err = ubi_read_volume_table(ubi, si); if (err) @@ -981,7 +982,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) ubi_msg("number of PEBs reserved for bad PEB handling: %d", ubi->beb_rsvd_pebs); ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); - ubi_msg("image sequence number: %d", ubi->image_seq); + ubi_msg("image sequence number: %d", ubi->image_seq); /* * The below lock makes sure we do not race with 'ubi_thread()' which diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 9f87c99189a..fe74749e0da 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -418,7 +418,8 @@ retry: * may try to recover data. FIXME: but this is * not implemented. */ - if (err == UBI_IO_BAD_VID_HDR) { + if (err == UBI_IO_BAD_HDR_READ || + err == UBI_IO_BAD_HDR) { ubi_warn("corrupted VID header at PEB " "%d, LEB %d:%d", pnum, vol_id, lnum); @@ -961,8 +962,8 @@ write_error: */ static int is_error_sane(int err) { - if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_VID_HDR || - err == -ETIMEDOUT) + if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_HDR || + err == UBI_IO_BAD_HDR_READ || err == -ETIMEDOUT) return 0; return 1; } @@ -1165,6 +1166,44 @@ out_unlock_leb: } /** + * print_rsvd_warning - warn about not having enough reserved PEBs. + * @ubi: UBI device description object + * + * This is a helper function for 'ubi_eba_init_scan()' which is called when UBI + * cannot reserve enough PEBs for bad block handling. This function makes a + * decision whether we have to print a warning or not. The algorithm is as + * follows: + * o if this is a new UBI image, then just print the warning + * o if this is an UBI image which has already been used for some time, print + * a warning only if we can reserve less than 10% of the expected amount of + * the reserved PEB. + * + * The idea is that when UBI is used, PEBs become bad, and the reserved pool + * of PEBs becomes smaller, which is normal and we do not want to scare users + * with a warning every time they attach the MTD device. This was an issue + * reported by real users. + */ +static void print_rsvd_warning(struct ubi_device *ubi, + struct ubi_scan_info *si) +{ + /* + * The 1 << 18 (256KiB) number is picked randomly, just a reasonably + * large number to distinguish between newly flashed and used images. + */ + if (si->max_sqnum > (1 << 18)) { + int min = ubi->beb_rsvd_level / 10; + + if (!min) + min = 1; + if (ubi->beb_rsvd_pebs > min) + return; + } + + ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d," + " need %d", ubi->beb_rsvd_pebs, ubi->beb_rsvd_level); +} + +/** * ubi_eba_init_scan - initialize the EBA sub-system using scanning information. * @ubi: UBI device description object * @si: scanning information @@ -1236,9 +1275,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si) if (ubi->avail_pebs < ubi->beb_rsvd_level) { /* No enough free physical eraseblocks */ ubi->beb_rsvd_pebs = ubi->avail_pebs; - ubi_warn("cannot reserve enough PEBs for bad PEB " - "handling, reserved %d, need %d", - ubi->beb_rsvd_pebs, ubi->beb_rsvd_level); + print_rsvd_warning(ubi, si); } else ubi->beb_rsvd_pebs = ubi->beb_rsvd_level; diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 4b979e34b15..332f992f13d 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -150,6 +150,8 @@ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset, retry: err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf); if (err) { + const char *errstr = (err == -EBADMSG) ? " (ECC error)" : ""; + if (err == -EUCLEAN) { /* * -EUCLEAN is reported if there was a bit-flip which @@ -165,15 +167,15 @@ retry: } if (read != len && retries++ < UBI_IO_RETRIES) { - dbg_io("error %d while reading %d bytes from PEB %d:%d," + dbg_io("error %d%s while reading %d bytes from PEB %d:%d," " read only %zd bytes, retry", - err, len, pnum, offset, read); + err, errstr, len, pnum, offset, read); yield(); goto retry; } - ubi_err("error %d while reading %d bytes from PEB %d:%d, " - "read %zd bytes", err, len, pnum, offset, read); + ubi_err("error %d%s while reading %d bytes from PEB %d:%d, " + "read %zd bytes", err, errstr, len, pnum, offset, read); ubi_dbg_dump_stack(); /* @@ -515,7 +517,7 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum) * In this case we probably anyway have garbage in this PEB. */ err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0); - if (err1 == UBI_IO_BAD_VID_HDR) + if (err1 == UBI_IO_BAD_HDR_READ || err1 == UBI_IO_BAD_HDR) /* * The VID header is corrupted, so we can safely erase this * PEB and not afraid that it will be treated as a valid PEB in @@ -709,7 +711,7 @@ bad: * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected * and corrected by the flash driver; this is harmless but may indicate that * this eraseblock may become bad soon (but may be not); - * o %UBI_IO_BAD_EC_HDR if the erase counter header is corrupted (a CRC error); + * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error); * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty; * o a negative error code in case of failure. */ @@ -736,23 +738,21 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, * header is still OK, we just report this as there was a * bit-flip. */ - read_err = err; + if (err == -EBADMSG) + read_err = UBI_IO_BAD_HDR_READ; } magic = be32_to_cpu(ec_hdr->magic); if (magic != UBI_EC_HDR_MAGIC) { + if (read_err) + return read_err; + /* * The magic field is wrong. Let's check if we have read all * 0xFF. If yes, this physical eraseblock is assumed to be * empty. - * - * But if there was a read error, we do not test it for all - * 0xFFs. Even if it does contain all 0xFFs, this error - * indicates that something is still wrong with this physical - * eraseblock and we anyway cannot treat it as empty. */ - if (read_err != -EBADMSG && - check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { + if (check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { /* The physical eraseblock is supposedly empty */ if (verbose) ubi_warn("no EC header found at PEB %d, " @@ -774,7 +774,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, } else if (UBI_IO_DEBUG) dbg_msg("bad magic number at PEB %d: %08x instead of " "%08x", pnum, magic, UBI_EC_HDR_MAGIC); - return UBI_IO_BAD_EC_HDR; + return UBI_IO_BAD_HDR; } crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); @@ -788,7 +788,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, } else if (UBI_IO_DEBUG) dbg_msg("bad EC header CRC at PEB %d, calculated " "%#08x, read %#08x", pnum, crc, hdr_crc); - return UBI_IO_BAD_EC_HDR; + return read_err ?: UBI_IO_BAD_HDR; } /* And of course validate what has just been read from the media */ @@ -798,6 +798,10 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, return -EINVAL; } + /* + * If there was %-EBADMSG, but the header CRC is still OK, report about + * a bit-flip to force scrubbing on this PEB. + */ return read_err ? UBI_IO_BITFLIPS : 0; } @@ -977,7 +981,7 @@ bad: * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected * and corrected by the flash driver; this is harmless but may indicate that * this eraseblock may become bad soon; - * o %UBI_IO_BAD_VID_HDR if the volume identifier header is corrupted (a CRC + * o %UBI_IO_BAD_HDR if the volume identifier header is corrupted (a CRC * error detected); * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID * header there); @@ -1008,22 +1012,20 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, * CRC check-sum and we will identify this. If the VID header is * still OK, we just report this as there was a bit-flip. */ - read_err = err; + if (err == -EBADMSG) + read_err = UBI_IO_BAD_HDR_READ; } magic = be32_to_cpu(vid_hdr->magic); if (magic != UBI_VID_HDR_MAGIC) { + if (read_err) + return read_err; + /* * If we have read all 0xFF bytes, the VID header probably does * not exist and the physical eraseblock is assumed to be free. - * - * But if there was a read error, we do not test the data for - * 0xFFs. Even if it does contain all 0xFFs, this error - * indicates that something is still wrong with this physical - * eraseblock and it cannot be regarded as free. */ - if (read_err != -EBADMSG && - check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { + if (check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { /* The physical eraseblock is supposedly free */ if (verbose) ubi_warn("no VID header found at PEB %d, " @@ -1045,7 +1047,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, } else if (UBI_IO_DEBUG) dbg_msg("bad magic number at PEB %d: %08x instead of " "%08x", pnum, magic, UBI_VID_HDR_MAGIC); - return UBI_IO_BAD_VID_HDR; + return UBI_IO_BAD_HDR; } crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC); @@ -1059,7 +1061,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, } else if (UBI_IO_DEBUG) dbg_msg("bad CRC at PEB %d, calculated %#08x, " "read %#08x", pnum, crc, hdr_crc); - return UBI_IO_BAD_VID_HDR; + return read_err ?: UBI_IO_BAD_HDR; } /* Validate the VID header that we have just read */ @@ -1069,6 +1071,10 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, return -EINVAL; } + /* + * If there was a read error (%-EBADMSG), but the header CRC is still + * OK, report about a bit-flip to force scrubbing on this PEB. + */ return read_err ? UBI_IO_BITFLIPS : 0; } diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index aed19f33b8f..372a15ac999 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -44,6 +44,7 @@ #include <linux/slab.h> #include <linux/crc32.h> #include <linux/math64.h> +#include <linux/random.h> #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -72,16 +73,19 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec, { struct ubi_scan_leb *seb; - if (list == &si->free) + if (list == &si->free) { dbg_bld("add to free: PEB %d, EC %d", pnum, ec); - else if (list == &si->erase) + si->free_peb_count += 1; + } else if (list == &si->erase) { dbg_bld("add to erase: PEB %d, EC %d", pnum, ec); - else if (list == &si->corr) { + si->erase_peb_count += 1; + } else if (list == &si->corr) { dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec); - si->corr_count += 1; - } else if (list == &si->alien) + si->corr_peb_count += 1; + } else if (list == &si->alien) { dbg_bld("add to alien: PEB %d, EC %d", pnum, ec); - else + si->alien_peb_count += 1; + } else BUG(); seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL); @@ -517,6 +521,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si, sv->leb_count += 1; rb_link_node(&seb->u.rb, parent, p); rb_insert_color(&seb->u.rb, &sv->root); + si->used_peb_count += 1; return 0; } @@ -745,19 +750,17 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, bitflips = 1; else if (err == UBI_IO_PEB_EMPTY) return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase); - else if (err == UBI_IO_BAD_EC_HDR) { + else if (err == UBI_IO_BAD_HDR_READ || err == UBI_IO_BAD_HDR) { /* * We have to also look at the VID header, possibly it is not * corrupted. Set %bitflips flag in order to make this PEB be * moved and EC be re-created. */ - ec_corr = 1; + ec_corr = err; ec = UBI_SCAN_UNKNOWN_EC; bitflips = 1; } - si->is_empty = 0; - if (!ec_corr) { int image_seq; @@ -813,9 +816,12 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, return err; else if (err == UBI_IO_BITFLIPS) bitflips = 1; - else if (err == UBI_IO_BAD_VID_HDR || + else if (err == UBI_IO_BAD_HDR_READ || err == UBI_IO_BAD_HDR || (err == UBI_IO_PEB_FREE && ec_corr)) { /* VID header is corrupted */ + if (err == UBI_IO_BAD_HDR_READ || + ec_corr == UBI_IO_BAD_HDR_READ) + si->read_err_count += 1; err = add_to_list(si, pnum, ec, &si->corr); if (err) return err; @@ -836,11 +842,11 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, switch (vidh->compat) { case UBI_COMPAT_DELETE: ubi_msg("\"delete\" compatible internal volume %d:%d" - " found, remove it", vol_id, lnum); + " found, will remove it", vol_id, lnum); err = add_to_list(si, pnum, ec, &si->corr); if (err) return err; - break; + return 0; case UBI_COMPAT_RO: ubi_msg("read-only compatible internal volume %d:%d" @@ -855,7 +861,6 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, err = add_to_list(si, pnum, ec, &si->alien); if (err) return err; - si->alien_peb_count += 1; return 0; case UBI_COMPAT_REJECT: @@ -886,6 +891,85 @@ adjust_mean_ec: } /** + * check_what_we_have - check what PEB were found by scanning. + * @ubi: UBI device description object + * @si: scanning information + * + * This is a helper function which takes a look what PEBs were found by + * scanning, and decides whether the flash is empty and should be formatted and + * whether there are too many corrupted PEBs and we should not attach this + * MTD device. Returns zero if we should proceed with attaching the MTD device, + * and %-EINVAL if we should not. + */ +static int check_what_we_have(struct ubi_device *ubi, struct ubi_scan_info *si) +{ + struct ubi_scan_leb *seb; + int max_corr; + + max_corr = ubi->peb_count - si->bad_peb_count - si->alien_peb_count; + max_corr = max_corr / 20 ?: 8; + + /* + * Few corrupted PEBs are not a problem and may be just a result of + * unclean reboots. However, many of them may indicate some problems + * with the flash HW or driver. + */ + if (si->corr_peb_count >= 8) { + ubi_warn("%d PEBs are corrupted", si->corr_peb_count); + printk(KERN_WARNING "corrupted PEBs are:"); + list_for_each_entry(seb, &si->corr, u.list) + printk(KERN_CONT " %d", seb->pnum); + printk(KERN_CONT "\n"); + + /* + * If too many PEBs are corrupted, we refuse attaching, + * otherwise, only print a warning. + */ + if (si->corr_peb_count >= max_corr) { + ubi_err("too many corrupted PEBs, refusing this device"); + return -EINVAL; + } + } + + if (si->free_peb_count + si->used_peb_count + + si->alien_peb_count == 0) { + /* No UBI-formatted eraseblocks were found */ + if (si->corr_peb_count == si->read_err_count && + si->corr_peb_count < 8) { + /* No or just few corrupted PEBs, and all of them had a + * read error. We assume that those are bad PEBs, which + * were just not marked as bad so far. + * + * This piece of code basically tries to distinguish + * between the following 2 situations: + * + * 1. Flash is empty, but there are few bad PEBs, which + * are not marked as bad so far, and which were read + * with error. We want to go ahead and format this + * flash. While formating, the faulty PEBs will + * probably be marked as bad. + * + * 2. Flash probably contains non-UBI data and we do + * not want to format it and destroy possibly needed + * data (e.g., consider the case when the bootloader + * MTD partition was accidentally fed to UBI). + */ + si->is_empty = 1; + ubi_msg("empty MTD device detected"); + get_random_bytes(&ubi->image_seq, sizeof(ubi->image_seq)); + } else { + ubi_err("MTD device possibly contains non-UBI data, " + "refusing it"); + return -EINVAL; + } + } + + if (si->corr_peb_count > 0) + ubi_msg("corrupted PEBs will be formatted"); + return 0; +} + +/** * ubi_scan - scan an MTD device. * @ubi: UBI device description object * @@ -909,7 +993,6 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) INIT_LIST_HEAD(&si->erase); INIT_LIST_HEAD(&si->alien); si->volumes = RB_ROOT; - si->is_empty = 1; err = -ENOMEM; ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL); @@ -935,21 +1018,9 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) if (si->ec_count) si->mean_ec = div_u64(si->ec_sum, si->ec_count); - if (si->is_empty) - ubi_msg("empty MTD device detected"); - - /* - * Few corrupted PEBs are not a problem and may be just a result of - * unclean reboots. However, many of them may indicate some problems - * with the flash HW or driver. Print a warning in this case. - */ - if (si->corr_count >= 8 || si->corr_count >= ubi->peb_count / 4) { - ubi_warn("%d PEBs are corrupted", si->corr_count); - printk(KERN_WARNING "corrupted PEBs are:"); - list_for_each_entry(seb, &si->corr, u.list) - printk(KERN_CONT " %d", seb->pnum); - printk(KERN_CONT "\n"); - } + err = check_what_we_have(ubi, si); + if (err) + goto out_vidh; /* * In case of unknown erase counter we use the mean erase counter diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h index ff179ad7ca5..2576a8d1532 100644 --- a/drivers/mtd/ubi/scan.h +++ b/drivers/mtd/ubi/scan.h @@ -91,10 +91,16 @@ struct ubi_scan_volume { * @erase: list of physical eraseblocks which have to be erased * @alien: list of physical eraseblocks which should not be used by UBI (e.g., * those belonging to "preserve"-compatible internal volumes) + * @used_peb_count: count of used PEBs + * @corr_peb_count: count of PEBs in the @corr list + * @read_err_count: count of PEBs read with error (%UBI_IO_BAD_HDR_READ was + * returned) + * @free_peb_count: count of PEBs in the @free list + * @erase_peb_count: count of PEBs in the @erase list + * @alien_peb_count: count of PEBs in the @alien list * @bad_peb_count: count of bad physical eraseblocks * @vols_found: number of volumes found during scanning * @highest_vol_id: highest volume ID - * @alien_peb_count: count of physical eraseblocks in the @alien list * @is_empty: flag indicating whether the MTD device is empty or not * @min_ec: lowest erase counter value * @max_ec: highest erase counter value @@ -102,7 +108,6 @@ struct ubi_scan_volume { * @mean_ec: mean erase counter value * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec - * @corr_count: count of corrupted PEBs * * This data structure contains the result of scanning and may be used by other * UBI sub-systems to build final UBI data structures, further error-recovery @@ -114,10 +119,15 @@ struct ubi_scan_info { struct list_head free; struct list_head erase; struct list_head alien; + int used_peb_count; + int corr_peb_count; + int read_err_count; + int free_peb_count; + int erase_peb_count; + int alien_peb_count; int bad_peb_count; int vols_found; int highest_vol_id; - int alien_peb_count; int is_empty; int min_ec; int max_ec; @@ -125,7 +135,6 @@ struct ubi_scan_info { int mean_ec; uint64_t ec_sum; int ec_count; - int corr_count; }; struct ubi_device; @@ -135,7 +144,7 @@ struct ubi_vid_hdr; * ubi_scan_move_to_list - move a PEB from the volume tree to a list. * * @sv: volume scanning information - * @seb: scanning eraseblock infprmation + * @seb: scanning eraseblock information * @list: the list to move to */ static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv, diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index a637f0283ad..0359e0cce48 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -89,16 +89,16 @@ * %0xFF bytes * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a * valid erase counter header, and the rest are %0xFF bytes - * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC) - * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or - * CRC) + * UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC) + * UBI_IO_BAD_HDR_READ: the same as %UBI_IO_BAD_HDR, but also there was a read + * error reported by the flash driver * UBI_IO_BITFLIPS: bit-flips were detected and corrected */ enum { UBI_IO_PEB_EMPTY = 1, UBI_IO_PEB_FREE, - UBI_IO_BAD_EC_HDR, - UBI_IO_BAD_VID_HDR, + UBI_IO_BAD_HDR, + UBI_IO_BAD_HDR_READ, UBI_IO_BITFLIPS }; |