summaryrefslogtreecommitdiffstats
path: root/drivers/net/3c59x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/3c59x.c')
-rw-r--r--drivers/net/3c59x.c61
1 files changed, 43 insertions, 18 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index cdbbb6226fc..c5669840242 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -102,8 +102,8 @@ static int vortex_debug = 1;
#include <linux/delay.h>
-static char version[] __devinitdata =
-DRV_NAME ": Donald Becker and others.\n";
+static const char version[] __devinitconst =
+ DRV_NAME ": Donald Becker and others.\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver ");
@@ -992,6 +992,42 @@ out:
return rc;
}
+static const struct net_device_ops boomrang_netdev_ops = {
+ .ndo_open = vortex_open,
+ .ndo_stop = vortex_close,
+ .ndo_start_xmit = boomerang_start_xmit,
+ .ndo_tx_timeout = vortex_tx_timeout,
+ .ndo_get_stats = vortex_get_stats,
+#ifdef CONFIG_PCI
+ .ndo_do_ioctl = vortex_ioctl,
+#endif
+ .ndo_set_multicast_list = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = poll_vortex,
+#endif
+};
+
+static const struct net_device_ops vortex_netdev_ops = {
+ .ndo_open = vortex_open,
+ .ndo_stop = vortex_close,
+ .ndo_start_xmit = vortex_start_xmit,
+ .ndo_tx_timeout = vortex_tx_timeout,
+ .ndo_get_stats = vortex_get_stats,
+#ifdef CONFIG_PCI
+ .ndo_do_ioctl = vortex_ioctl,
+#endif
+ .ndo_set_multicast_list = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = poll_vortex,
+#endif
+};
+
/*
* Start up the PCI/EISA device which is described by *gendev.
* Return 0 on success.
@@ -1366,18 +1402,16 @@ static int __devinit vortex_probe1(struct device *gendev,
}
/* The 3c59x-specific entries in the device structure. */
- dev->open = vortex_open;
if (vp->full_bus_master_tx) {
- dev->hard_start_xmit = boomerang_start_xmit;
+ dev->netdev_ops = &boomrang_netdev_ops;
/* Actually, it still should work with iommu. */
if (card_idx < MAX_UNITS &&
((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) ||
hw_checksums[card_idx] == 1)) {
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
}
- } else {
- dev->hard_start_xmit = vortex_start_xmit;
- }
+ } else
+ dev->netdev_ops = &vortex_netdev_ops;
if (print_info) {
printk(KERN_INFO "%s: scatter/gather %sabled. h/w checksums %sabled\n",
@@ -1386,18 +1420,9 @@ static int __devinit vortex_probe1(struct device *gendev,
(dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
}
- dev->stop = vortex_close;
- dev->get_stats = vortex_get_stats;
-#ifdef CONFIG_PCI
- dev->do_ioctl = vortex_ioctl;
-#endif
dev->ethtool_ops = &vortex_ethtool_ops;
- dev->set_multicast_list = set_rx_mode;
- dev->tx_timeout = vortex_tx_timeout;
dev->watchdog_timeo = (watchdog * HZ) / 1000;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = poll_vortex;
-#endif
+
if (pdev) {
vp->pm_state_valid = 1;
pci_save_state(VORTEX_PCI(vp));
@@ -2883,7 +2908,7 @@ static void vortex_get_drvinfo(struct net_device *dev,
strcpy(info->bus_info, pci_name(VORTEX_PCI(vp)));
} else {
if (VORTEX_EISA(vp))
- sprintf(info->bus_info, dev_name(vp->gendev));
+ strcpy(info->bus_info, dev_name(vp->gendev));
else
sprintf(info->bus_info, "EISA 0x%lx %d",
dev->base_addr, dev->irq);