diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 84 |
1 files changed, 66 insertions, 18 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index dd9a09c72df..7029cd50c45 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -90,6 +90,18 @@ config MACVLAN To compile this driver as a module, choose M here: the module will be called macvlan. +config MACVTAP + tristate "MAC-VLAN based tap driver (EXPERIMENTAL)" + depends on MACVLAN + help + This adds a specialized tap character device driver that is based + on the MAC-VLAN network interface, called macvtap. A macvtap device + can be added in the same way as a macvlan device, using 'type + macvlan', and then be accessed through the tap user space interface. + + To compile this driver as a module, choose M here: the module + will be called macvtap. + config EQUALIZER tristate "EQL (serial line load balancing) support" ---help--- @@ -868,8 +880,8 @@ config BFIN_RX_DESC_NUM Set the number of buffer packets used in driver. config BFIN_MAC_RMII - bool "RMII PHY Interface (EXPERIMENTAL)" - depends on BFIN_MAC && EXPERIMENTAL + bool "RMII PHY Interface" + depends on BFIN_MAC default y if BFIN527_EZKIT default n if BFIN537_STAMP help @@ -920,7 +932,7 @@ config NET_NETX config TI_DAVINCI_EMAC tristate "TI DaVinci EMAC Support" - depends on ARM && ARCH_DAVINCI + depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) select PHYLIB help This driver supports TI's DaVinci Ethernet . @@ -983,6 +995,14 @@ config ETHOC help Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. +config GRETH + tristate "Aeroflex Gaisler GRETH Ethernet MAC support" + depends on SPARC + select PHYLIB + select CRC32 + help + Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC. + config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 @@ -1368,6 +1388,17 @@ config AC3200 To compile this driver as a module, choose M here. The module will be called ac3200. +config KSZ884X_PCI + tristate "Micrel KSZ8841/2 PCI" + depends on NET_PCI && PCI + select MII + select CRC32 + help + This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip. + + To compile this driver as a module, choose M here. The module + will be called ksz884x. + config APRICOT tristate "Apricot Xen-II on board Ethernet" depends on NET_PCI && ISA @@ -1883,7 +1914,8 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 || ARCH_MX25 + depends on M523x || M527x || M5272 || M528x || M520x || M532x || \ + MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire and Freescale i.MX processors. @@ -1939,6 +1971,7 @@ config ATL2 config XILINX_EMACLITE tristate "Xilinx 10/100 Ethernet Lite support" depends on PPC32 || MICROBLAZE + select PHYLIB help This driver supports the 10/100 Ethernet Lite from Xilinx. @@ -2356,20 +2389,6 @@ config GELIC_WIRELESS the driver automatically distinguishes the models, you can safely enable this option even if you have a wireless-less model. -config GELIC_WIRELESS_OLD_PSK_INTERFACE - bool "PS3 Wireless private PSK interface (OBSOLETE)" - depends on GELIC_WIRELESS - select WEXT_PRIV - help - This option retains the obsolete private interface to pass - the PSK from user space programs to the driver. The PSK - stands for 'Pre Shared Key' and is used for WPA[2]-PSK - (WPA-Personal) environment. - If WPA[2]-PSK is used and you need to use old programs that - support only this old interface, say Y. Otherwise N. - - If unsure, say N. - config FSL_PQ_MDIO tristate "Freescale PQ MDIO" depends on FSL_SOC @@ -2618,6 +2637,28 @@ config IXGBE_DCB If unsure, say N. +config IXGBEVF + tristate "Intel(R) 82599 Virtual Function Ethernet support" + depends on PCI_MSI + ---help--- + This driver supports Intel(R) 82599 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: + + <http://support.intel.com/support/network/sb/CS-008441.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/ixgbevf.txt>. + + To compile this driver as a module, choose M here. The module + will be called ixgbevf. MSI-X interrupt support is required + for this driver to work correctly. + config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI @@ -2756,6 +2797,13 @@ config BNX2X To compile this driver as a module, choose M here: the module will be called bnx2x. This is recommended. +config QLCNIC + tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support" + depends on PCI + help + This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet + devices. + config QLGE tristate "QLogic QLGE 10Gb Ethernet Driver Support" depends on PCI |