diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 344 |
1 files changed, 175 insertions, 169 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 86b8641b466..389980f0e59 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -136,10 +136,11 @@ config TUN If you don't know what to use this for, you don't need it. config VETH - tristate "Virtual ethernet device" + tristate "Virtual ethernet pair device" ---help--- - The device is an ethernet tunnel. Devices are created in pairs. When - one end receives the packet it appears on its pair and vice versa. + This device is a local ethernet tunnel. Devices are created in pairs. + When one end receives the packet it appears on its pair and vice + versa. config NET_SB1000 tristate "General Instruments Surfboard 1000" @@ -165,15 +166,6 @@ config NET_SB1000 If you don't have this card, of course say N. -config IP1000 - tristate "IP1000 Gigabit Ethernet support" - depends on PCI && EXPERIMENTAL - ---help--- - This driver supports IP1000 gigabit Ethernet cards. - - To compile this driver as a module, choose M here: the module - will be called ipg. This is recommended. - source "drivers/net/arcnet/Kconfig" source "drivers/net/phy/Kconfig" @@ -220,7 +212,7 @@ config MII config MACB tristate "Atmel MACB support" - depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 + depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9 select PHYLIB help The Atmel MACB ethernet interface is found on many AT32 and AT91 @@ -233,7 +225,7 @@ source "drivers/net/arm/Kconfig" config AX88796 tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS + depends on ARM || MIPS || SUPERH select CRC32 select MII help @@ -364,8 +356,7 @@ config MAC89x0 read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. This module will + To compile this driver as a module, choose M here. This module will be called mac89x0. config MACSONIC @@ -378,8 +369,7 @@ config MACSONIC one of these say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. This module will + To compile this driver as a module, choose M here. This module will be called macsonic. config MACMACE @@ -617,8 +607,7 @@ config EL1 have problems. Some people suggest to ping ("man ping") a nearby machine every minute ("man cron") when using this card. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c501. config EL2 @@ -630,8 +619,7 @@ config EL2 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c503. config ELPLUS @@ -643,8 +631,7 @@ config ELPLUS this type, say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c505. config EL16 @@ -655,8 +642,7 @@ config EL16 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c507. config EL3 @@ -671,8 +657,7 @@ config EL3 setup disk to disable Plug & Play mode, and to select the default media type. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c509. config 3C515 @@ -683,8 +668,7 @@ config 3C515 network card, say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c515. config ELMC @@ -695,8 +679,7 @@ config ELMC the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c523. config ELMC_II @@ -707,8 +690,7 @@ config ELMC_II the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c527. config VORTEX @@ -731,8 +713,7 @@ config VORTEX <file:Documentation/networking/vortex.txt> and in the comments at the beginning of <file:drivers/net/3c59x.c>. - To compile this support as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. + To compile this support as a module, choose M here. config TYPHOON tristate "3cr990 series \"Typhoon\" support" @@ -749,8 +730,7 @@ config TYPHOON the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called typhoon. config LANCE @@ -787,8 +767,7 @@ config WD80x3 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called wd. config ULTRAMCA @@ -800,8 +779,7 @@ config ULTRAMCA an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called smc-mca. config ULTRA @@ -820,8 +798,7 @@ config ULTRA this but keep it in mind if you have such a SCSI card and have problems. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called smc-ultra. config ULTRA32 @@ -833,8 +810,7 @@ config ULTRA32 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called smc-ultra32. config BFIN_MAC @@ -895,15 +871,14 @@ config SMC9194 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called smc9194. config SMC91X tristate "SMC 91C9x/91C1xxx support" select CRC32 select MII - depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN + depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN help This is a driver for SMC's 91x series of Ethernet chipsets, including the SMC91C94 and the SMC91C111. Say Y if you want it @@ -914,8 +889,7 @@ config SMC91X This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called smc91x. If you want to compile it as a - module, say M here and read <file:Documentation/kbuild/modules.txt> - as well as <file:Documentation/networking/net-modules.txt>. + module, say M here and read <file:Documentation/kbuild/modules.txt>. config NET_NETX tristate "NetX Ethernet support" @@ -924,8 +898,7 @@ config NET_NETX help This is support for the Hilscher netX builtin Ethernet ports - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called netx-eth. config DM9000 @@ -936,15 +909,32 @@ config DM9000 ---help--- Support for DM9000 chipset. + To compile this driver as a module, choose M here. The module + will be called dm9000. + +config ENC28J60 + tristate "ENC28J60 support" + depends on EXPERIMENTAL && SPI && NET_ETHERNET + select CRC32 + ---help--- + Support for the Microchip EN28J60 ethernet chip. + To compile this driver as a module, choose M here and read <file:Documentation/networking/net-modules.txt>. The module will be - called dm9000. + called enc28j60. + +config ENC28J60_WRITEVERIFY + bool "Enable write verify" + depends on ENC28J60 + ---help--- + Enable the verify after the buffer write useful for debugging purpose. + If unsure, say N. config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 select MII - depends on ARCH_PXA || SUPERH + depends on ARCH_PXA || SH_MAGIC_PANEL_R2 help This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118. @@ -978,8 +968,7 @@ config NI5010 <http://www.tldp.org/docs.html#howto>. Note that this is still experimental code. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ni5010. config NI52 @@ -990,8 +979,7 @@ config NI52 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ni52. config NI65 @@ -1002,8 +990,7 @@ config NI65 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ni65. source "drivers/net/tulip/Kconfig" @@ -1017,8 +1004,7 @@ config AT1700 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called at1700. config DEPCA @@ -1031,8 +1017,7 @@ config DEPCA <http://www.tldp.org/docs.html#howto> as well as <file:drivers/net/depca.c>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called depca. config HP100 @@ -1043,8 +1028,7 @@ config HP100 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called hp100. config NET_ISA @@ -1073,8 +1057,7 @@ config E2100 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called e2100. config EWRK3 @@ -1088,8 +1071,7 @@ config EWRK3 well as the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ewrk3. config EEXPRESS @@ -1103,8 +1085,7 @@ config EEXPRESS because the driver was very unreliable. We now have a new driver that should do better. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called eexpress. config EEXPRESS_PRO @@ -1117,8 +1098,7 @@ config EEXPRESS_PRO driver. Please read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called eepro. config HPLAN_PLUS @@ -1130,8 +1110,7 @@ config HPLAN_PLUS the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called hp-plus. config HPLAN @@ -1143,8 +1122,7 @@ config HPLAN the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called hp. config LP486E @@ -1163,8 +1141,7 @@ config ETH16I the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called eth16i. config NE2000 @@ -1184,8 +1161,7 @@ config NE2000 laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", below. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ne. config ZNET @@ -1206,8 +1182,7 @@ config SEEQ8005 is for you, read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called seeq8005. config NE2_MCA @@ -1219,8 +1194,7 @@ config NE2_MCA the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ne2. config IBMLANA @@ -1231,8 +1205,7 @@ config IBMLANA CONFIG_MCA to use this driver. It is both available as an in-kernel driver and as a module. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The only + To compile this driver as a module, choose M here. The only currently supported card is the IBM LAN Adapter/A for Ethernet. It will both support 16K and 32K memory windows, however a 32K window gives a better security against packet losses. Usage of multiple @@ -1246,8 +1219,7 @@ config IBMVETH This driver supports virtual ethernet adapters on newer IBM iSeries and pSeries systems. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will + To compile this driver as a module, choose M here. The module will be called ibmveth. source "drivers/net/ibm_emac/Kconfig" @@ -1277,8 +1249,7 @@ config PCNET32 answer Y here and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called pcnet32. config PCNET32_NAPI @@ -1305,8 +1276,7 @@ config AMD8111_ETH answer Y here and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called amd8111e. config AMD8111E_NAPI @@ -1360,8 +1330,7 @@ config AC3200 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ac3200. config APRICOT @@ -1372,9 +1341,8 @@ config APRICOT read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called apricot. + To compile this driver as a module, choose M here. The module + will be called apricot. config B44 tristate "Broadcom 440x/47xx ethernet support" @@ -1386,9 +1354,8 @@ config B44 or M and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called b44. + To compile this driver as a module, choose M here. The module + will be called b44. # Auto-select SSB PCI-HOST support, if possible config B44_PCI_AUTOSELECT @@ -1417,9 +1384,8 @@ config FORCEDETH read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called forcedeth. + To compile this driver as a module, choose M here. The module + will be called forcedeth. config FORCEDETH_NAPI bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" @@ -1445,9 +1411,8 @@ config CS89x0 <http://www.tldp.org/docs.html#howto> as well as <file:Documentation/networking/cs89x0.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called cs89x0. + To compile this driver as a module, choose M here. The module + will be called cs89x0. config TC35815 tristate "TOSHIBA TC35815 Ethernet support" @@ -1463,8 +1428,7 @@ config EEPRO100 card, say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called eepro100. @@ -1491,8 +1455,7 @@ config E100 More specific information on configuring the driver is in <file:Documentation/networking/e100.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called e100. config LNE390 @@ -1504,8 +1467,7 @@ config LNE390 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called lne390. config FEALNX @@ -1545,8 +1507,7 @@ config NE2K_PCI NetVin NV5000SC Via 86C926 SureCom NE34 Winbond Holtek HT80232 Holtek HT80229 - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ne2k-pci. config NE3210 @@ -1559,8 +1520,7 @@ config NE3210 <http://www.tldp.org/docs.html#howto>. Note that this driver will NOT WORK for NE3200 cards as they are completely different. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ne3210. config ES3210 @@ -1572,8 +1532,7 @@ config ES3210 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called es3210. config 8139CP @@ -1643,6 +1602,18 @@ config 8139_OLD_RX_RESET experience problems, you can enable this option to restore the old RX-reset behavior. If unsure, say N. +config R6040 + tristate "RDC R6040 Fast Ethernet Adapter support (EXPERIMENTAL)" + depends on NET_PCI && PCI + select CRC32 + select MII + help + This is a driver for the R6040 Fast Ethernet MACs found in the + the RDC R-321x System-on-chips. + + To compile this driver as a module, choose M here: the module + will be called r6040. This is recommended. + config SIS900 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI @@ -1703,8 +1674,7 @@ config TLAN Compaq NetFlex and Olicom cards. Please read the file <file:Documentation/networking/tlan.txt> for more details. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called tlan. Please email feedback to <torben.mathiasen@compaq.com>. @@ -1845,7 +1815,7 @@ config DE620 config SGISEEQ tristate "SGI Seeq ethernet controller support" - depends on SGI_IP22 + depends on SGI_HAS_SEEQ help Say Y here if you have an Seeq based Ethernet network card. This is used in many Silicon Graphics machines. @@ -1880,6 +1850,28 @@ config FEC2 Say Y here if you want to use the second built-in 10/100 Fast ethernet controller on some Motorola ColdFire processors. +config FEC_MPC52xx + tristate "MPC52xx FEC driver" + depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC + select CRC32 + select PHYLIB + ---help--- + This option enables support for the MPC5200's on-chip + Fast Ethernet Controller + If compiled as module, it will be called 'fec_mpc52xx.ko'. + +config FEC_MPC52xx_MDIO + bool "MPC52xx FEC MDIO bus driver" + depends on FEC_MPC52xx + default y + ---help--- + The MPC5200's FEC can connect to the Ethernet either with + an external MII PHY chip or 10 Mbps 7-wire interface + (Motorola? industry standard). + If your board uses an external PHY connected to FEC, enable this. + If not sure, enable. + If compiled as module, it will be called 'fec_mpc52xx_phy.ko'. + config NE_H8300 tristate "NE2000 compatible support for H8/300" depends on H8300 @@ -1972,8 +1964,7 @@ config E1000 More specific information on configuring the driver is in <file:Documentation/networking/e1000.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called e1000. config E1000_NAPI @@ -2015,13 +2006,44 @@ config E1000E <http://support.intel.com> - More specific information on configuring the driver is in - <file:Documentation/networking/e1000e.txt>. - - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called e1000e. +config E1000E_ENABLED + def_bool E1000E != n + +config IP1000 + tristate "IP1000 Gigabit Ethernet support" + depends on PCI && EXPERIMENTAL + select MII + ---help--- + This driver supports IP1000 gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called ipg. This is recommended. + +config IGB + tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82575 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called igb. + source "drivers/net/ixp2000/Kconfig" config MYRI_SBUS @@ -2052,8 +2074,7 @@ config HAMACHI the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be + To compile this driver as a module, choose M here. The module will be called hamachi. config YELLOWFIN @@ -2335,7 +2356,7 @@ config GELIC_NET config GIANFAR tristate "Gianfar Ethernet" - depends on 85xx || 83xx || PPC_86xx + depends on FSL_SOC select PHYLIB select CRC32 help @@ -2499,11 +2520,7 @@ config IXGBE <http://support.intel.com> - More specific information on configuring the driver is in - <file:Documentation/networking/ixgbe.txt>. - - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ixgbe. config IXGB @@ -2525,8 +2542,7 @@ config IXGB More specific information on configuring the driver is in <file:Documentation/networking/ixgb.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ixgb. config IXGB_NAPI @@ -2579,8 +2595,7 @@ config MYRI10GE <http://www.myri.com/scs/download-Myri10GE.html> - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called myri10ge. config NETXEN_NIC @@ -2600,6 +2615,7 @@ config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" depends on PPC64 && PCI select PHYLIB + select INET_LRO help This driver supports the on-chip 1/10Gbit Ethernet controller on PA Semi's PWRficient line of chips. @@ -2625,6 +2641,16 @@ config TEHUTI help Tehuti Networks 10G Ethernet NIC +config BNX2X + tristate "Broadcom NetXtremeII 10Gb support" + depends on PCI + select ZLIB_INFLATE + help + This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. + To compile this driver as a module, choose M here: the module + will be called bnx2x. This is recommended. + + endif # NETDEV_10000 source "drivers/net/tokenring/Kconfig" @@ -2804,10 +2830,9 @@ config PLIP with the PLIP support in Linux versions 1.0.x. This option enlarges your kernel by about 8 KB. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called plip. If unsure, say Y or M, in case you buy a laptop - later. + To compile this driver as a module, choose M here. The module + will be called plip. If unsure, say Y or M, in case you buy + a laptop later. config PPP tristate "PPP (point-to-point protocol) support" @@ -2837,8 +2862,7 @@ config PPP If you said Y to "Version information on all symbols" above, then you cannot compile the PPP driver into the kernel; you can then only compile it as a module. To compile this driver as a module, choose M - here and read <file:Documentation/networking/net-modules.txt>. - The module will be called ppp_generic. + here. The module will be called ppp_generic. config PPP_MULTILINK bool "PPP multilink support (EXPERIMENTAL)" @@ -2999,9 +3023,8 @@ config SLIP <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP support will enlarge your kernel by about 4 KB. If unsure, say N. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called slip. + To compile this driver as a module, choose M here. The module + will be called slip. config SLIP_COMPRESSED bool "CSLIP compressed headers" @@ -3058,23 +3081,6 @@ config NET_FC adaptor below. You also should have said Y to "SCSI support" and "SCSI generic support". -config SHAPER - tristate "Traffic Shaper (OBSOLETE)" - depends on EXPERIMENTAL - ---help--- - The traffic shaper is a virtual network device that allows you to - limit the rate of outgoing data flow over some other network device. - The traffic that you want to slow down can then be routed through - these virtual devices. See - <file:Documentation/networking/shaper.txt> for more information. - - An alternative to this traffic shaper are traffic schedulers which - you'll get if you say Y to "QoS and/or fair queuing" in - "Networking options". - - To compile this driver as a module, choose M here: the module - will be called shaper. If unsure, say N. - config NETCONSOLE tristate "Network console logging support (EXPERIMENTAL)" depends on EXPERIMENTAL |