diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 287 |
1 files changed, 151 insertions, 136 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f6668cdaac8..16fe4f9b719 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1533,7 +1533,7 @@ config E100 <http://support.intel.com/support/network/adapter/pro100/21397.htm> - to identify the adapter. + to identify the adapter. For the latest Intel PRO/100 network driver for Linux, see: @@ -1786,17 +1786,17 @@ config KS8842 tristate "Micrel KSZ8841/42 with generic bus interface" depends on HAS_IOMEM && DMA_ENGINE help - This platform driver is for KSZ8841(1-port) / KS8842(2-port) - ethernet switch chip (managed, VLAN, QoS) from Micrel or - Timberdale(FPGA). + This platform driver is for KSZ8841(1-port) / KS8842(2-port) + ethernet switch chip (managed, VLAN, QoS) from Micrel or + Timberdale(FPGA). config KS8851 - tristate "Micrel KS8851 SPI" - depends on SPI - select MII + tristate "Micrel KS8851 SPI" + depends on SPI + select MII select CRC32 - help - SPI driver for Micrel KS8851 SPI attached network chip. + help + SPI driver for Micrel KS8851 SPI attached network chip. config KS8851_MLL tristate "Micrel KS8851 MLL" @@ -1944,19 +1944,12 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on M523x || M527x || M5272 || M528x || M520x || M532x || \ - MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 + MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28 select PHYLIB help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire and Freescale i.MX processors. -config FEC2 - bool "Second FEC ethernet controller (on some ColdFire CPUs)" - depends on FEC - help - Say Y here if you want to use the second built-in 10/100 Fast - ethernet controller on some Motorola ColdFire processors. - config FEC_MPC52xx tristate "MPC52xx FEC driver" depends on PPC_MPC52xx && PPC_BESTCOMM @@ -2133,25 +2126,25 @@ config IP1000 will be called ipg. This is recommended. config IGB - tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" - depends on PCI - ---help--- - This driver supports Intel(R) 82575/82576 gigabit ethernet family of - adapters. For more information on how to identify your adapter, go - to the Adapter & Driver ID Guide at: + tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82575/82576 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: - <http://support.intel.com/support/network/adapter/pro100/21397.htm> + <http://support.intel.com/support/network/adapter/pro100/21397.htm> - For general information and support, go to the Intel support - website at: + For general information and support, go to the Intel support + website at: - <http://support.intel.com> + <http://support.intel.com> - More specific information on configuring the driver is in - <file:Documentation/networking/e1000.txt>. + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. - To compile this driver as a module, choose M here. The module - will be called igb. + To compile this driver as a module, choose M here. The module + will be called igb. config IGB_DCA bool "Direct Cache Access (DCA) Support" @@ -2163,25 +2156,25 @@ config IGB_DCA is used, with the intent of lessening the impact of cache misses. config IGBVF - tristate "Intel(R) 82576 Virtual Function Ethernet support" - depends on PCI - ---help--- - This driver supports Intel(R) 82576 virtual functions. For more - information on how to identify your adapter, go to the Adapter & - Driver ID Guide at: + tristate "Intel(R) 82576 Virtual Function Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82576 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: - <http://support.intel.com/support/network/adapter/pro100/21397.htm> + <http://support.intel.com/support/network/adapter/pro100/21397.htm> - For general information and support, go to the Intel support - website at: + For general information and support, go to the Intel support + website at: - <http://support.intel.com> + <http://support.intel.com> - More specific information on configuring the driver is in - <file:Documentation/networking/e1000.txt>. + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. - To compile this driver as a module, choose M here. The module - will be called igbvf. + To compile this driver as a module, choose M here. The module + will be called igbvf. source "drivers/net/ixp2000/Kconfig" @@ -2233,6 +2226,7 @@ config YELLOWFIN config R8169 tristate "Realtek 8169 gigabit ethernet support" depends on PCI + select FW_LOADER select CRC32 select MII ---help--- @@ -2300,14 +2294,14 @@ config SKGE will be called skge. This is recommended. config SKGE_DEBUG - bool "Debugging interface" - depends on SKGE && DEBUG_FS - help - This option adds the ability to dump driver state for debugging. - The file /sys/kernel/debug/skge/ethX displays the state of the internal - transmit and receive rings. + bool "Debugging interface" + depends on SKGE && DEBUG_FS + help + This option adds the ability to dump driver state for debugging. + The file /sys/kernel/debug/skge/ethX displays the state of the internal + transmit and receive rings. - If unsure, say N. + If unsure, say N. config SKY2 tristate "SysKonnect Yukon2 support" @@ -2326,14 +2320,14 @@ config SKY2 will be called sky2. This is recommended. config SKY2_DEBUG - bool "Debugging interface" - depends on SKY2 && DEBUG_FS - help - This option adds the ability to dump driver state for debugging. - The file /sys/kernel/debug/sky2/ethX displays the state of the internal - transmit and receive rings. + bool "Debugging interface" + depends on SKY2 && DEBUG_FS + help + This option adds the ability to dump driver state for debugging. + The file /sys/kernel/debug/sky2/ethX displays the state of the internal + transmit and receive rings. - If unsure, say N. + If unsure, say N. config VIA_VELOCITY tristate "VIA Velocity support" @@ -2389,12 +2383,12 @@ config SPIDER_NET Cell Processor-Based Blades from IBM. config TSI108_ETH - tristate "Tundra TSI108 gigabit Ethernet support" - depends on TSI108_BRIDGE - help - This driver supports Tundra TSI108 gigabit Ethernet ports. - To compile this driver as a module, choose M here: the module - will be called tsi108_eth. + tristate "Tundra TSI108 gigabit Ethernet support" + depends on TSI108_BRIDGE + help + This driver supports Tundra TSI108 gigabit Ethernet ports. + To compile this driver as a module, choose M here: the module + will be called tsi108_eth. config GELIC_NET tristate "PS3 Gigabit Ethernet driver" @@ -2543,10 +2537,10 @@ config PCH_GBE depends on PCI select MII ---help--- - This is a gigabit ethernet driver for Topcliff PCH. - Topcliff PCH is the platform controller hub that is used in Intel's + This is a gigabit ethernet driver for EG20T PCH. + EG20T PCH is the platform controller hub that is used in Intel's general embedded platform. - Topcliff PCH has Gigabit Ethernet interface. + EG20T PCH has Gigabit Ethernet interface. Using this interface, it is able to access system devices connected to Gigabit Ethernet. This driver enables Gigabit Ethernet function. @@ -2573,32 +2567,32 @@ config MDIO tristate config CHELSIO_T1 - tristate "Chelsio 10Gb Ethernet support" - depends on PCI + tristate "Chelsio 10Gb Ethernet support" + depends on PCI select CRC32 select MDIO - help - This driver supports Chelsio gigabit and 10-gigabit - Ethernet cards. More information about adapter features and + help + This driver supports Chelsio gigabit and 10-gigabit + Ethernet cards. More information about adapter features and performance tuning is in <file:Documentation/networking/cxgb.txt>. - For general information about Chelsio and our products, visit - our website at <http://www.chelsio.com>. + For general information about Chelsio and our products, visit + our website at <http://www.chelsio.com>. - For customer support, please visit our customer support page at - <http://www.chelsio.com/support.html>. + For customer support, please visit our customer support page at + <http://www.chelsio.com/support.html>. - Please send feedback to <linux-bugs@chelsio.com>. + Please send feedback to <linux-bugs@chelsio.com>. - To compile this driver as a module, choose M here: the module - will be called cxgb. + To compile this driver as a module, choose M here: the module + will be called cxgb. config CHELSIO_T1_1G - bool "Chelsio gigabit Ethernet support" - depends on CHELSIO_T1 - help - Enables support for Chelsio's gigabit Ethernet PCI cards. If you - are using only 10G cards say 'N' here. + bool "Chelsio gigabit Ethernet support" + depends on CHELSIO_T1 + help + Enables support for Chelsio's gigabit Ethernet PCI cards. If you + are using only 10G cards say 'N' here. config CHELSIO_T3_DEPENDS tristate @@ -2728,26 +2722,26 @@ config IXGBE_DCB If unsure, say N. config IXGBEVF - tristate "Intel(R) 82599 Virtual Function Ethernet support" - depends on PCI_MSI - ---help--- - This driver supports Intel(R) 82599 virtual functions. For more - information on how to identify your adapter, go to the Adapter & - Driver ID Guide at: + tristate "Intel(R) 82599 Virtual Function Ethernet support" + depends on PCI_MSI + ---help--- + This driver supports Intel(R) 82599 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: - <http://support.intel.com/support/network/sb/CS-008441.htm> + <http://support.intel.com/support/network/sb/CS-008441.htm> - For general information and support, go to the Intel support - website at: + For general information and support, go to the Intel support + website at: - <http://support.intel.com> + <http://support.intel.com> - More specific information on configuring the driver is in - <file:Documentation/networking/ixgbevf.txt>. + More specific information on configuring the driver is in + <file:Documentation/networking/ixgbevf.txt>. - To compile this driver as a module, choose M here. The module - will be called ixgbevf. MSI-X interrupt support is required - for this driver to work correctly. + To compile this driver as a module, choose M here. The module + will be called ixgbevf. MSI-X interrupt support is required + for this driver to work correctly. config IXGB tristate "Intel(R) PRO/10GbE support" @@ -2772,29 +2766,38 @@ config IXGB will be called ixgb. config S2IO - tristate "S2IO 10Gbe XFrame NIC" + tristate "Exar Xframe 10Gb Ethernet Adapter" depends on PCI ---help--- - This driver supports the 10Gbe XFrame NIC of S2IO. + This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters. + More specific information on configuring the driver is in <file:Documentation/networking/s2io.txt>. + To compile this driver as a module, choose M here. The module + will be called s2io. + config VXGE - tristate "Neterion X3100 Series 10GbE PCIe Server Adapter" + tristate "Exar X3100 Series 10GbE PCIe Server Adapter" depends on PCI && INET ---help--- - This driver supports Neterion Inc's X3100 Series 10 GbE PCIe + This driver supports Exar Corp's X3100 Series 10 GbE PCIe I/O Virtualized Server Adapter. + More specific information on configuring the driver is in <file:Documentation/networking/vxge.txt>. + To compile this driver as a module, choose M here. The module + will be called vxge. + config VXGE_DEBUG_TRACE_ALL bool "Enabling All Debug trace statments in driver" default n depends on VXGE ---help--- Say Y here if you want to enabling all the debug trace statements in - driver. By default only few debug trace statements are enabled. + the vxge driver. By default only few debug trace statements are + enabled. config MYRI10GE tristate "Myricom Myri-10G Ethernet support" @@ -2906,18 +2909,18 @@ config QLGE will be called qlge. config BNA - tristate "Brocade 1010/1020 10Gb Ethernet Driver support" - depends on PCI - ---help--- - This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet - cards. - To compile this driver as a module, choose M here: the module - will be called bna. + tristate "Brocade 1010/1020 10Gb Ethernet Driver support" + depends on PCI + ---help--- + This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet + cards. + To compile this driver as a module, choose M here: the module + will be called bna. - For general information and support, go to the Brocade support - website at: + For general information and support, go to the Brocade support + website at: - <http://support.brocade.com> + <http://support.brocade.com> source "drivers/net/sfc/Kconfig" @@ -2945,9 +2948,22 @@ source "drivers/s390/net/Kconfig" source "drivers/net/caif/Kconfig" +config TILE_NET + tristate "Tilera GBE/XGBE network driver support" + depends on TILE + default y + select CRC32 + help + This is a standard Linux network device driver for the + on-chip Tilera Gigabit Ethernet and XAUI interfaces. + + To compile this driver as a module, choose M here: the module + will be called tile_net. + config XEN_NETDEV_FRONTEND tristate "Xen network device frontend driver" depends on XEN + select XEN_XENBUS_FRONTEND default y help The network device frontend driver allows the kernel to @@ -3227,18 +3243,18 @@ config PPP_BSDCOMP modules once you have said "make modules". If unsure, say N. config PPP_MPPE - tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)" - depends on PPP && EXPERIMENTAL - select CRYPTO - select CRYPTO_SHA1 - select CRYPTO_ARC4 - select CRYPTO_ECB - ---help--- - Support for the MPPE Encryption protocol, as employed by the - Microsoft Point-to-Point Tunneling Protocol. - - See http://pptpclient.sourceforge.net/ for information on - configuring PPTP clients and servers to utilize this method. + tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)" + depends on PPP && EXPERIMENTAL + select CRYPTO + select CRYPTO_SHA1 + select CRYPTO_ARC4 + select CRYPTO_ECB + ---help--- + Support for the MPPE Encryption protocol, as employed by the + Microsoft Point-to-Point Tunneling Protocol. + + See http://pptpclient.sourceforge.net/ for information on + configuring PPTP clients and servers to utilize this method. config PPPOE tristate "PPP over Ethernet (EXPERIMENTAL)" @@ -3373,8 +3389,7 @@ config NETCONSOLE config NETCONSOLE_DYNAMIC bool "Dynamic reconfiguration of logging targets" - depends on NETCONSOLE && SYSFS - select CONFIGFS_FS + depends on NETCONSOLE && SYSFS && CONFIGFS_FS help This option enables the ability to dynamically reconfigure target parameters (interface, IP addresses, port numbers, MAC addresses) @@ -3397,14 +3412,14 @@ config VIRTIO_NET depends on EXPERIMENTAL && VIRTIO ---help--- This is the virtual network driver for virtio. It can be used with - lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. + lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. config VMXNET3 - tristate "VMware VMXNET3 ethernet driver" - depends on PCI && INET - help - This driver supports VMware's vmxnet3 virtual ethernet NIC. - To compile this driver as a module, choose M here: the - module will be called vmxnet3. + tristate "VMware VMXNET3 ethernet driver" + depends on PCI && INET + help + This driver supports VMware's vmxnet3 virtual ethernet NIC. + To compile this driver as a module, choose M here: the + module will be called vmxnet3. endif # NETDEVICES |