diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 72 |
1 files changed, 53 insertions, 19 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 214a92d1ef7..01f282cd098 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1,4 +1,3 @@ - # # Network device configuration # @@ -26,15 +25,6 @@ menuconfig NETDEVICES # that for each of the symbols. if NETDEVICES -config COMPAT_NET_DEV_OPS - default y - bool "Enable older network device API compatibility" - ---help--- - This option enables kernel compatibility with older network devices - that do not use net_device_ops interface. - - If unsure, say Y. - config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT @@ -526,15 +516,16 @@ config STNIC config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ - (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7619) + (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \ + CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \ + CPU_SUBTYPE_SH7724) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710, SH7712, SH7763 and SH7619. + This driver support SH7710, SH7712, SH7763, SH7619, and SH7724. config SUNLANCE tristate "Sun LANCE support" @@ -927,6 +918,16 @@ config NET_NETX To compile this driver as a module, choose M here. The module will be called netx-eth. +config TI_DAVINCI_EMAC + tristate "TI DaVinci EMAC Support" + depends on ARM && ARCH_DAVINCI + select PHYLIB + help + This driver supports TI's DaVinci Ethernet . + + To compile this driver as a module, choose M here: the module + will be called davinci_emac_driver. This is recommended. + config DM9000 tristate "DM9000 support" depends on ARM || BLACKFIN || MIPS @@ -1000,7 +1001,7 @@ config SMC911X config SMSC911X tristate "SMSC LAN911x/LAN921x families embedded ethernet support" - depends on ARM || SUPERH + depends on ARM || SUPERH || BLACKFIN select CRC32 select MII select PHYLIB @@ -1722,6 +1723,11 @@ config TLAN Please email feedback to <torben.mathiasen@compaq.com>. +config KS8842 + tristate "Micrel KSZ8842" + help + This platform driver is for Micrel KSZ8842 chip. + config VIA_RHINE tristate "VIA Rhine support" depends on NET_PCI && PCI @@ -1858,8 +1864,8 @@ config 68360_ENET the Motorola 68360 processor. config FEC - bool "FEC ethernet controller (of ColdFire CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 + bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" + depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire and Freescale i.MX processors. @@ -1880,7 +1886,7 @@ config FEC_MPC52xx ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller - If compiled as module, it will be called 'fec_mpc52xx.ko'. + If compiled as module, it will be called fec_mpc52xx. config FEC_MPC52xx_MDIO bool "MPC52xx FEC MDIO bus driver" @@ -1892,7 +1898,7 @@ config FEC_MPC52xx_MDIO (Motorola? industry standard). If your board uses an external PHY connected to FEC, enable this. If not sure, enable. - If compiled as module, it will be called 'fec_mpc52xx_phy.ko'. + If compiled as module, it will be called fec_mpc52xx_phy. config NE_H8300 tristate "NE2000 compatible support for H8/300" @@ -2264,6 +2270,17 @@ config BNX2 To compile this driver as a module, choose M here: the module will be called bnx2. This is recommended. +config CNIC + tristate "Broadcom CNIC support" + depends on BNX2 + depends on UIO + help + This driver supports offload features of Broadcom NetXtremeII + gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called cnic. This is recommended. + config SPIDER_NET tristate "Spider Gigabit Ethernet driver" depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) @@ -2351,7 +2368,7 @@ config UGETH_TX_ON_DEMAND config MV643XX_ETH tristate "Marvell Discovery (643XX) and Orion ethernet support" - depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION + depends on MV64X60 || PPC32 || PLAT_ORION select INET_LRO select PHYLIB help @@ -2362,6 +2379,14 @@ config MV643XX_ETH Some boards that use the Discovery chipset are the Momenco Ocelot C and Jaguar ATX and Pegasos II. +config XILINX_LL_TEMAC + tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" + select PHYLIB + depends on PPC_DCR_NATIVE + help + This driver supports the Xilinx 10/100/1000 LocalLink TEMAC + core used in Xilinx Spartan and Virtex FPGAs + config QLA3XXX tristate "QLogic QLA3XXX Network Driver Support" depends on PCI @@ -2435,10 +2460,14 @@ menuconfig NETDEV_10000 if NETDEV_10000 +config MDIO + tristate + config CHELSIO_T1 tristate "Chelsio 10Gb Ethernet support" depends on PCI select CRC32 + select MDIO help This driver supports Chelsio gigabit and 10-gigabit Ethernet cards. More information about adapter features and @@ -2471,6 +2500,7 @@ config CHELSIO_T3 tristate "Chelsio Communications T3 10Gb Ethernet support" depends on CHELSIO_T3_DEPENDS select FW_LOADER + select MDIO help This driver supports Chelsio T3-based gigabit and 10Gb Ethernet adapters. @@ -2506,6 +2536,7 @@ config ENIC config IXGBE tristate "Intel(R) 10GbE PCI Express adapters support" depends on PCI && INET + select MDIO ---help--- This driver supports Intel(R) 10GbE PCI Express family of adapters. For more information on how to identify your adapter, go @@ -2668,6 +2699,7 @@ config TEHUTI config BNX2X tristate "Broadcom NetXtremeII 10Gb support" depends on PCI + select FW_LOADER select ZLIB_INFLATE select LIBCRC32C help @@ -2704,6 +2736,8 @@ source "drivers/net/wan/Kconfig" source "drivers/atm/Kconfig" +source "drivers/ieee802154/Kconfig" + source "drivers/s390/net/Kconfig" config XEN_NETDEV_FRONTEND |