diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 200 |
1 files changed, 0 insertions, 200 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 77ab2e18947..e6491169cc6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1032,32 +1032,6 @@ config TC35815 depends on NET_PCI && PCI && MIPS select PHYLIB -config E100 - tristate "Intel(R) PRO/100+ support" - depends on NET_PCI && PCI - select MII - ---help--- - This driver supports Intel(R) PRO/100 family of adapters. - To verify that your adapter is supported, find the board ID number - on the adapter. Look for a label that has a barcode and a number - in the format 123456-001 (six digits hyphen three digits). - - Use the above information and the Adapter & Driver ID Guide at: - - <http://support.intel.com/support/network/adapter/pro100/21397.htm> - - to identify the adapter. - - For the latest Intel PRO/100 network driver for Linux, see: - - <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> - - More specific information on configuring the driver is in - <file:Documentation/networking/e100.txt>. - - To compile this driver as a module, choose M here. The module - will be called e100. - config FEALNX tristate "Myson MTD-8xx PCI Ethernet support" depends on NET_PCI && PCI @@ -1490,47 +1464,6 @@ config DL2K To compile this driver as a module, choose M here: the module will be called dl2k. -config E1000 - tristate "Intel(R) PRO/1000 Gigabit Ethernet support" - depends on PCI - ---help--- - This driver supports Intel(R) PRO/1000 gigabit ethernet family of - adapters. For more information on how to identify your adapter, go - to the Adapter & Driver ID Guide at: - - <http://support.intel.com/support/network/adapter/pro100/21397.htm> - - For general information and support, go to the Intel support - website at: - - <http://support.intel.com> - - More specific information on configuring the driver is in - <file:Documentation/networking/e1000.txt>. - - To compile this driver as a module, choose M here. The module - will be called e1000. - -config E1000E - tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" - depends on PCI && (!SPARC32 || BROKEN) - select CRC32 - ---help--- - This driver supports the PCI-Express Intel(R) PRO/1000 gigabit - ethernet family of adapters. For PCI or PCI-X e1000 adapters, - use the regular e1000 driver For more information on how to - identify your adapter, go to the Adapter & Driver ID Guide at: - - <http://support.intel.com/support/network/adapter/pro100/21397.htm> - - For general information and support, go to the Intel support - website at: - - <http://support.intel.com> - - To compile this driver as a module, choose M here. The module - will be called e1000e. - config IP1000 tristate "IP1000 Gigabit Ethernet support" depends on PCI && EXPERIMENTAL @@ -1541,57 +1474,6 @@ config IP1000 To compile this driver as a module, choose M here: the module will be called ipg. This is recommended. -config IGB - tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" - depends on PCI - ---help--- - This driver supports Intel(R) 82575/82576 gigabit ethernet family of - adapters. For more information on how to identify your adapter, go - to the Adapter & Driver ID Guide at: - - <http://support.intel.com/support/network/adapter/pro100/21397.htm> - - For general information and support, go to the Intel support - website at: - - <http://support.intel.com> - - More specific information on configuring the driver is in - <file:Documentation/networking/e1000.txt>. - - To compile this driver as a module, choose M here. The module - will be called igb. - -config IGB_DCA - bool "Direct Cache Access (DCA) Support" - default y - depends on IGB && DCA && !(IGB=y && DCA=m) - ---help--- - Say Y here if you want to use Direct Cache Access (DCA) in the - driver. DCA is a method for warming the CPU cache before data - is used, with the intent of lessening the impact of cache misses. - -config IGBVF - tristate "Intel(R) 82576 Virtual Function Ethernet support" - depends on PCI - ---help--- - This driver supports Intel(R) 82576 virtual functions. For more - information on how to identify your adapter, go to the Adapter & - Driver ID Guide at: - - <http://support.intel.com/support/network/adapter/pro100/21397.htm> - - For general information and support, go to the Intel support - website at: - - <http://support.intel.com> - - More specific information on configuring the driver is in - <file:Documentation/networking/e1000.txt>. - - To compile this driver as a module, choose M here. The module - will be called igbvf. - source "drivers/net/ixp2000/Kconfig" config NS83820 @@ -1958,88 +1840,6 @@ config ENIC help This enables the support for the Cisco VIC Ethernet card. -config IXGBE - tristate "Intel(R) 10GbE PCI Express adapters support" - depends on PCI && INET - select MDIO - ---help--- - This driver supports Intel(R) 10GbE PCI Express family of - adapters. For more information on how to identify your adapter, go - to the Adapter & Driver ID Guide at: - - <http://support.intel.com/support/network/adapter/pro100/21397.htm> - - For general information and support, go to the Intel support - website at: - - <http://support.intel.com> - - To compile this driver as a module, choose M here. The module - will be called ixgbe. - -config IXGBE_DCA - bool "Direct Cache Access (DCA) Support" - default y - depends on IXGBE && DCA && !(IXGBE=y && DCA=m) - ---help--- - Say Y here if you want to use Direct Cache Access (DCA) in the - driver. DCA is a method for warming the CPU cache before data - is used, with the intent of lessening the impact of cache misses. - -config IXGBE_DCB - bool "Data Center Bridging (DCB) Support" - default n - depends on IXGBE && DCB - ---help--- - Say Y here if you want to use Data Center Bridging (DCB) in the - driver. - - If unsure, say N. - -config IXGBEVF - tristate "Intel(R) 82599 Virtual Function Ethernet support" - depends on PCI_MSI - ---help--- - This driver supports Intel(R) 82599 virtual functions. For more - information on how to identify your adapter, go to the Adapter & - Driver ID Guide at: - - <http://support.intel.com/support/network/sb/CS-008441.htm> - - For general information and support, go to the Intel support - website at: - - <http://support.intel.com> - - More specific information on configuring the driver is in - <file:Documentation/networking/ixgbevf.txt>. - - To compile this driver as a module, choose M here. The module - will be called ixgbevf. MSI-X interrupt support is required - for this driver to work correctly. - -config IXGB - tristate "Intel(R) PRO/10GbE support" - depends on PCI - ---help--- - This driver supports Intel(R) PRO/10GbE family of adapters for - PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver - instead. For more information on how to identify your adapter, go - to the Adapter & Driver ID Guide at: - - <http://support.intel.com/support/network/adapter/pro100/21397.htm> - - For general information and support, go to the Intel support - website at: - - <http://support.intel.com> - - More specific information on configuring the driver is in - <file:Documentation/networking/ixgb.txt>. - - To compile this driver as a module, choose M here. The module - will be called ixgb. - config S2IO tristate "Exar Xframe 10Gb Ethernet Adapter" depends on PCI |