diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 70 |
1 files changed, 55 insertions, 15 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4a11296a951..1d8af334833 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1386,7 +1386,8 @@ config FORCEDETH_NAPI config CS89x0 tristate "CS89x0 support" - depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X) + depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ + || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS) ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1397,6 +1398,11 @@ config CS89x0 To compile this driver as a module, choose M here. The module will be called cs89x0. +config CS89x0_NONISA_IRQ + def_bool y + depends on CS89x0 != n + depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS + config TC35815 tristate "TOSHIBA TC35815 Ethernet support" depends on NET_PCI && PCI && MIPS @@ -1813,7 +1819,7 @@ config FEC2 config FEC_MPC52xx tristate "MPC52xx FEC driver" - depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC + depends on PPC_MPC52xx && PPC_BESTCOMM_FEC select CRC32 select PHYLIB ---help--- @@ -1840,6 +1846,17 @@ config NE_H8300 Say Y here if you want to use the NE2000 compatible controller on the Renesas H8/300 processor. +config ATL2 + tristate "Atheros L2 Fast Ethernet support" + depends on PCI + select CRC32 + select MII + help + This driver supports the Atheros L2 fast ethernet adapter. + + To compile this driver as a module, choose M here. The module + will be called atl2. + source "drivers/net/fs_enet/Kconfig" endif # NET_ETHERNET @@ -1927,15 +1944,6 @@ config E1000 To compile this driver as a module, choose M here. The module will be called e1000. -config E1000_DISABLE_PACKET_SPLIT - bool "Disable Packet Split for PCI express adapters" - depends on E1000 - help - Say Y here if you want to use the legacy receive path for PCI express - hardware. - - If in doubt, say N. - config E1000E tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" depends on PCI && (!SPARC32 || BROKEN) @@ -2046,6 +2054,7 @@ config R8169 tristate "Realtek 8169 gigabit ethernet support" depends on PCI select CRC32 + select MII ---help--- Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter. @@ -2262,7 +2271,7 @@ config UGETH_TX_ON_DEMAND config MV643XX_ETH tristate "Marvell Discovery (643XX) and Orion ethernet support" depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION - select MII + select PHYLIB help This driver supports the gigabit ethernet MACs in the Marvell Discovery PPC/MIPS chipset family (MV643XX) and @@ -2281,12 +2290,13 @@ config QLA3XXX will be called qla3xxx. config ATL1 - tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + tristate "Atheros/Attansic L1 Gigabit Ethernet support" + depends on PCI select CRC32 select MII help - This driver supports the Attansic L1 gigabit ethernet adapter. + This driver supports the Atheros/Attansic L1 gigabit ethernet + adapter. To compile this driver as a module, choose M here. The module will be called atl1. @@ -2302,6 +2312,18 @@ config ATL1E To compile this driver as a module, choose M here. The module will be called atl1e. +config JME + tristate "JMicron(R) PCI-Express Gigabit Ethernet support" + depends on PCI + select CRC32 + select MII + ---help--- + This driver supports the PCI-Express gigabit ethernet adapters + based on JMicron JMC250 chipset. + + To compile this driver as a module, choose M here. The module + will be called jme. + endif # NETDEV_1000 # @@ -2377,10 +2399,18 @@ config EHEA To compile the driver as a module, choose M here. The module will be called ehea. +config ENIC + tristate "Cisco 10G Ethernet NIC support" + depends on PCI && INET + select INET_LRO + help + This enables the support for the Cisco 10G Ethernet card. + config IXGBE tristate "Intel(R) 10GbE PCI Express adapters support" depends on PCI && INET select INET_LRO + select INTEL_IOATDMA ---help--- This driver supports Intel(R) 10GbE PCI Express family of adapters. For more information on how to identify your adapter, go @@ -2432,6 +2462,7 @@ config MYRI10GE select FW_LOADER select CRC32 select INET_LRO + select INTEL_IOATDMA ---help--- This driver supports Myricom Myri-10G Dual Protocol interface in Ethernet mode. If the eeprom on your board is not recent enough, @@ -2496,6 +2527,15 @@ config BNX2X To compile this driver as a module, choose M here: the module will be called bnx2x. This is recommended. +config QLGE + tristate "QLogic QLGE 10Gb Ethernet Driver Support" + depends on PCI + help + This driver supports QLogic ISP8XXX 10Gb Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called qlge. + source "drivers/net/sfc/Kconfig" endif # NETDEV_10000 |