diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 116 |
1 files changed, 29 insertions, 87 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 627316db374..b941c74a06c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -197,6 +197,15 @@ config MACB source "drivers/net/arm/Kconfig" +config AX88796 + tristate "ASIX AX88796 NE2000 clone support" + depends on ARM || MIPS + select CRC32 + select MII + help + AX88796 driver, using platform bus to provide + chip detection and resources + config MACE tristate "MACE (Power Mac ethernet) support" depends on PPC_PMAC && PPC32 @@ -2105,7 +2114,7 @@ config SKGE with better performance and more complete ethtool support. It does not support the link failover and network management - features that "portable" vendor supplied sk98lin driver does. + features available in the hardware. This driver supports adapters based on the original Yukon chipset: Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, @@ -2118,7 +2127,7 @@ config SKGE will be called skge. This is recommended. config SKY2 - tristate "SysKonnect Yukon2 support (EXPERIMENTAL)" + tristate "SysKonnect Yukon2 support" depends on PCI select CRC32 ---help--- @@ -2133,92 +2142,15 @@ config SKY2 To compile this driver as a module, choose M here: the module will be called sky2. This is recommended. -config SK98LIN - tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" - depends on PCI - ---help--- - Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx - compliant Gigabit Ethernet Adapter. - - This driver supports the original Yukon chipset. This driver is - deprecated and will be removed from the kernel in the near future, - it has been replaced by the skge driver. skge is cleaner and - seems to work better. +config SKY2_DEBUG + bool "Debugging interface" + depends on SKY2 && DEBUG_FS + help + This option adds the ability to dump driver state for debugging. + The file debugfs/sky2/ethX displays the state of the internal + transmit and receive rings. - This driver does not support the newer Yukon2 chipset. A separate - driver, sky2, is provided to support Yukon2-based adapters. - - The following adapters are supported by this driver: - - 3Com 3C940 Gigabit LOM Ethernet Adapter - - 3Com 3C941 Gigabit LOM Ethernet Adapter - - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter - - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter - - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter - - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter - - Allied Telesyn AT-2971T Gigabit Ethernet Adapter - - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 - - EG1032 v2 Instant Gigabit Network Adapter - - EG1064 v2 Instant Gigabit Network Adapter - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) - - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) - - Marvell RDK-8001 Adapter - - Marvell RDK-8002 Adapter - - Marvell RDK-8003 Adapter - - Marvell RDK-8004 Adapter - - Marvell RDK-8006 Adapter - - Marvell RDK-8007 Adapter - - Marvell RDK-8008 Adapter - - Marvell RDK-8009 Adapter - - Marvell RDK-8010 Adapter - - Marvell RDK-8011 Adapter - - Marvell RDK-8012 Adapter - - Marvell RDK-8052 Adapter - - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) - - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) - - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) - - SK-9521 10/100/1000Base-T Adapter - - SK-9521 V2.0 10/100/1000Base-T Adapter - - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) - - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter - - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) - - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) - - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter - - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) - - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) - - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) - - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) - - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) - - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) - - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter - - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) - - SMC EZ Card 1000 (SMC9452TXV.2) - - The adapters support Jumbo Frames. - The dual link adapters support link-failover and dual port features. - Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support - the scatter-gather functionality with sendfile(). Please refer to - <file:Documentation/networking/sk98lin.txt> for more information about - optional driver parameters. - Questions concerning this driver may be addressed to: - <linux@syskonnect.de> - - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read <file:Documentation/kbuild/modules.txt>. The module will - be called sk98lin. This is recommended. + If unsure, say N. config VIA_VELOCITY tristate "VIA Velocity support" @@ -2268,6 +2200,16 @@ config TSI108_ETH To compile this driver as a module, choose M here: the module will be called tsi108_eth. +config GELIC_NET + tristate "PS3 Gigabit Ethernet driver" + depends on PPC_PS3 + help + This driver supports the network device on the PS3 game + console. This driver has built-in support for Ethernet. + + To compile this driver as a module, choose M here: the + module will be called ps3_gelic. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx || PPC_86xx |