diff options
Diffstat (limited to 'drivers/net/arm')
| -rw-r--r-- | drivers/net/arm/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/arm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/arm/etherh.c | 866 |
3 files changed, 0 insertions, 875 deletions
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index d0c8cf254cb..715bf2acc24 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -17,14 +17,6 @@ config ARM_ETHER3 If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. -config ARM_ETHERH - tristate "I-cubed EtherH/ANT EtherM support" - depends on ARM && ARCH_ACORN - select CRC32 - help - If you have an Acorn system with one of these network cards, you - should say Y to this option if you wish to use it with Linux. - config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" depends on ARM && ARCH_AT91RM9200 diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile index 63c57be34ab..f1e6150b675 100644 --- a/drivers/net/arm/Makefile +++ b/drivers/net/arm/Makefile @@ -3,7 +3,6 @@ # Makefile for the ARM network device drivers # -obj-$(CONFIG_ARM_ETHERH) += etherh.o obj-$(CONFIG_ARM_ETHER3) += ether3.o obj-$(CONFIG_ARM_ETHER1) += ether1.o obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c deleted file mode 100644 index 03e217a868d..00000000000 --- a/drivers/net/arm/etherh.c +++ /dev/null @@ -1,866 +0,0 @@ -/* - * linux/drivers/acorn/net/etherh.c - * - * Copyright (C) 2000-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * NS8390 I-cubed EtherH and ANT EtherM specific driver - * Thanks to I-Cubed for information on their cards. - * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton - * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan) - * EtherM integration re-engineered by Russell King. - * - * Changelog: - * 08-12-1996 RMK 1.00 Created - * RMK 1.03 Added support for EtherLan500 cards - * 23-11-1997 RMK 1.04 Added media autodetection - * 16-04-1998 RMK 1.05 Improved media autodetection - * 10-02-2000 RMK 1.06 Updated for 2.3.43 - * 13-05-2000 RMK 1.07 Updated for 2.3.99-pre8 - * 12-10-1999 CK/TEW EtherM driver first release - * 21-12-2000 TTC EtherH/EtherM integration - * 25-12-2000 RMK 1.08 Clean integration of EtherM into this driver. - * 03-01-2002 RMK 1.09 Always enable IRQs if we're in the nic slot. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <linux/jiffies.h> - -#include <asm/system.h> -#include <asm/ecard.h> -#include <asm/io.h> - -#define EI_SHIFT(x) (ei_local->reg_offset[x]) - -#define ei_inb(_p) readb((void __iomem *)_p) -#define ei_outb(_v,_p) writeb(_v,(void __iomem *)_p) -#define ei_inb_p(_p) readb((void __iomem *)_p) -#define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p) - -#define NET_DEBUG 0 -#define DEBUG_INIT 2 - -#define DRV_NAME "etherh" -#define DRV_VERSION "1.11" - -static char version[] __initdata = - "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n"; - -#include "../lib8390.c" - -static unsigned int net_debug = NET_DEBUG; - -struct etherh_priv { - void __iomem *ioc_fast; - void __iomem *memc; - void __iomem *dma_base; - unsigned int id; - void __iomem *ctrl_port; - unsigned char ctrl; - u32 supported; -}; - -struct etherh_data { - unsigned long ns8390_offset; - unsigned long dataport_offset; - unsigned long ctrlport_offset; - int ctrl_ioc; - const char name[16]; - u32 supported; - unsigned char tx_start_page; - unsigned char stop_page; -}; - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("EtherH/EtherM driver"); -MODULE_LICENSE("GPL"); - -#define ETHERH500_DATAPORT 0x800 /* MEMC */ -#define ETHERH500_NS8390 0x000 /* MEMC */ -#define ETHERH500_CTRLPORT 0x800 /* IOC */ - -#define ETHERH600_DATAPORT 0x040 /* MEMC */ -#define ETHERH600_NS8390 0x800 /* MEMC */ -#define ETHERH600_CTRLPORT 0x200 /* MEMC */ - -#define ETHERH_CP_IE 1 -#define ETHERH_CP_IF 2 -#define ETHERH_CP_HEARTBEAT 2 - -#define ETHERH_TX_START_PAGE 1 -#define ETHERH_STOP_PAGE 127 - -/* - * These came from CK/TEW - */ -#define ETHERM_DATAPORT 0x200 /* MEMC */ -#define ETHERM_NS8390 0x800 /* MEMC */ -#define ETHERM_CTRLPORT 0x23c /* MEMC */ - -#define ETHERM_TX_START_PAGE 64 -#define ETHERM_STOP_PAGE 127 - -/* ------------------------------------------------------------------------ */ - -#define etherh_priv(dev) \ - ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device))) - -static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask) -{ - unsigned char ctrl = eh->ctrl | mask; - eh->ctrl = ctrl; - writeb(ctrl, eh->ctrl_port); -} - -static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask) -{ - unsigned char ctrl = eh->ctrl & ~mask; - eh->ctrl = ctrl; - writeb(ctrl, eh->ctrl_port); -} - -static inline unsigned int etherh_get_stat(struct etherh_priv *eh) -{ - return readb(eh->ctrl_port); -} - - - - -static void etherh_irq_enable(ecard_t *ec, int irqnr) -{ - struct etherh_priv *eh = ec->irq_data; - - etherh_set_ctrl(eh, ETHERH_CP_IE); -} - -static void etherh_irq_disable(ecard_t *ec, int irqnr) -{ - struct etherh_priv *eh = ec->irq_data; - - etherh_clr_ctrl(eh, ETHERH_CP_IE); -} - -static expansioncard_ops_t etherh_ops = { - .irqenable = etherh_irq_enable, - .irqdisable = etherh_irq_disable, -}; - - - - -static void -etherh_setif(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - unsigned long flags; - void __iomem *addr; - - local_irq_save(flags); - - /* set the interface type */ - switch (etherh_priv(dev)->id) { - case PROD_I3_ETHERLAN600: - case PROD_I3_ETHERLAN600A: - addr = (void __iomem *)dev->base_addr + EN0_RCNTHI; - - switch (dev->if_port) { - case IF_PORT_10BASE2: - writeb((readb(addr) & 0xf8) | 1, addr); - break; - case IF_PORT_10BASET: - writeb((readb(addr) & 0xf8), addr); - break; - } - break; - - case PROD_I3_ETHERLAN500: - switch (dev->if_port) { - case IF_PORT_10BASE2: - etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF); - break; - - case IF_PORT_10BASET: - etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF); - break; - } - break; - - default: - break; - } - - local_irq_restore(flags); -} - -static int -etherh_getifstat(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - void __iomem *addr; - int stat = 0; - - switch (etherh_priv(dev)->id) { - case PROD_I3_ETHERLAN600: - case PROD_I3_ETHERLAN600A: - addr = (void __iomem *)dev->base_addr + EN0_RCNTHI; - switch (dev->if_port) { - case IF_PORT_10BASE2: - stat = 1; - break; - case IF_PORT_10BASET: - stat = readb(addr) & 4; - break; - } - break; - - case PROD_I3_ETHERLAN500: - switch (dev->if_port) { - case IF_PORT_10BASE2: - stat = 1; - break; - case IF_PORT_10BASET: - stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT; - break; - } - break; - - default: - stat = 0; - break; - } - - return stat != 0; -} - -/* - * Configure the interface. Note that we ignore the other - * parts of ifmap, since its mostly meaningless for this driver. - */ -static int etherh_set_config(struct net_device *dev, struct ifmap *map) -{ - switch (map->port) { - case IF_PORT_10BASE2: - case IF_PORT_10BASET: - /* - * If the user explicitly sets the interface - * media type, turn off automedia detection. - */ - dev->flags &= ~IFF_AUTOMEDIA; - dev->if_port = map->port; - break; - - default: - return -EINVAL; - } - - etherh_setif(dev); - - return 0; -} - -/* - * Reset the 8390 (hard reset). Note that we can't actually do this. - */ -static void -etherh_reset(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - void __iomem *addr = (void __iomem *)dev->base_addr; - - writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr); - - /* - * See if we need to change the interface type. - * Note that we use 'interface_num' as a flag - * to indicate that we need to change the media. - */ - if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) { - ei_local->interface_num = 0; - - if (dev->if_port == IF_PORT_10BASET) - dev->if_port = IF_PORT_10BASE2; - else - dev->if_port = IF_PORT_10BASET; - - etherh_setif(dev); - } -} - -/* - * Write a block of data out to the 8390 - */ -static void -etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page) -{ - struct ei_device *ei_local = netdev_priv(dev); - unsigned long dma_start; - void __iomem *dma_base, *addr; - - if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); - return; - } - - /* - * Make sure we have a round number of bytes if we're in word mode. - */ - if (count & 1 && ei_local->word16) - count++; - - ei_local->dmaing = 1; - - addr = (void __iomem *)dev->base_addr; - dma_base = etherh_priv(dev)->dma_base; - - count = (count + 1) & ~1; - writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); - - writeb (0x42, addr + EN0_RCNTLO); - writeb (0x00, addr + EN0_RCNTHI); - writeb (0x42, addr + EN0_RSARLO); - writeb (0x00, addr + EN0_RSARHI); - writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); - - udelay (1); - - writeb (ENISR_RDC, addr + EN0_ISR); - writeb (count, addr + EN0_RCNTLO); - writeb (count >> 8, addr + EN0_RCNTHI); - writeb (0, addr + EN0_RSARLO); - writeb (start_page, addr + EN0_RSARHI); - writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD); - - if (ei_local->word16) - writesw (dma_base, buf, count >> 1); - else - writesb (dma_base, buf, count); - - dma_start = jiffies; - - while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0) - if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk(KERN_ERR "%s: timeout waiting for TX RDC\n", - dev->name); - etherh_reset (dev); - __NS8390_init (dev, 1); - break; - } - - writeb (ENISR_RDC, addr + EN0_ISR); - ei_local->dmaing = 0; -} - -/* - * Read a block of data from the 8390 - */ -static void -etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - struct ei_device *ei_local = netdev_priv(dev); - unsigned char *buf; - void __iomem *dma_base, *addr; - - if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); - return; - } - - ei_local->dmaing = 1; - - addr = (void __iomem *)dev->base_addr; - dma_base = etherh_priv(dev)->dma_base; - - buf = skb->data; - writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); - writeb (count, addr + EN0_RCNTLO); - writeb (count >> 8, addr + EN0_RCNTHI); - writeb (ring_offset, addr + EN0_RSARLO); - writeb (ring_offset >> 8, addr + EN0_RSARHI); - writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); - - if (ei_local->word16) { - readsw (dma_base, buf, count >> 1); - if (count & 1) - buf[count - 1] = readb (dma_base); - } else - readsb (dma_base, buf, count); - - writeb (ENISR_RDC, addr + EN0_ISR); - ei_local->dmaing = 0; -} - -/* - * Read a header from the 8390 - */ -static void -etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - struct ei_device *ei_local = netdev_priv(dev); - void __iomem *dma_base, *addr; - - if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); - return; - } - - ei_local->dmaing = 1; - - addr = (void __iomem *)dev->base_addr; - dma_base = etherh_priv(dev)->dma_base; - - writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); - writeb (sizeof (*hdr), addr + EN0_RCNTLO); - writeb (0, addr + EN0_RCNTHI); - writeb (0, addr + EN0_RSARLO); - writeb (ring_page, addr + EN0_RSARHI); - writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); - - if (ei_local->word16) - readsw (dma_base, hdr, sizeof (*hdr) >> 1); - else - readsb (dma_base, hdr, sizeof (*hdr)); - - writeb (ENISR_RDC, addr + EN0_ISR); - ei_local->dmaing = 0; -} - -/* - * Open/initialize the board. This is called (in the current kernel) - * sometime after booting when the 'ifconfig' program is run. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is non-reboot way to recover if something goes wrong. - */ -static int -etherh_open(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - - if (!is_valid_ether_addr(dev->dev_addr)) { - printk(KERN_WARNING "%s: invalid ethernet MAC address\n", - dev->name); - return -EINVAL; - } - - if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev)) - return -EAGAIN; - - /* - * Make sure that we aren't going to change the - * media type on the next reset - we are about to - * do automedia manually now. - */ - ei_local->interface_num = 0; - - /* - * If we are doing automedia detection, do it now. - * This is more reliable than the 8390's detection. - */ - if (dev->flags & IFF_AUTOMEDIA) { - dev->if_port = IF_PORT_10BASET; - etherh_setif(dev); - mdelay(1); - if (!etherh_getifstat(dev)) { - dev->if_port = IF_PORT_10BASE2; - etherh_setif(dev); - } - } else - etherh_setif(dev); - - etherh_reset(dev); - __ei_open(dev); - - return 0; -} - -/* - * The inverse routine to etherh_open(). - */ -static int -etherh_close(struct net_device *dev) -{ - __ei_close (dev); - free_irq (dev->irq, dev); - return 0; -} - -/* - * Initialisation - */ - -static void __init etherh_banner(void) -{ - static int version_printed; - - if (net_debug && version_printed++ == 0) - printk(KERN_INFO "%s", version); -} - -/* - * Read the ethernet address string from the on board rom. - * This is an ascii string... - */ -static int __devinit etherh_addr(char *addr, struct expansion_card *ec) -{ - struct in_chunk_dir cd; - char *s; - - if (!ecard_readchunk(&cd, ec, 0xf5, 0)) { - printk(KERN_ERR "%s: unable to read podule description string\n", - dev_name(&ec->dev)); - goto no_addr; - } - - s = strchr(cd.d.string, '('); - if (s) { - int i; - - for (i = 0; i < 6; i++) { - addr[i] = simple_strtoul(s + 1, &s, 0x10); - if (*s != (i == 5? ')' : ':')) - break; - } - - if (i == 6) - return 0; - } - - printk(KERN_ERR "%s: unable to parse MAC address: %s\n", - dev_name(&ec->dev), cd.d.string); - - no_addr: - return -ENODEV; -} - -/* - * Create an ethernet address from the system serial number. - */ -static int __init etherm_addr(char *addr) -{ - unsigned int serial; - - if (system_serial_low == 0 && system_serial_high == 0) - return -ENODEV; - - serial = system_serial_low | system_serial_high; - - addr[0] = 0; - addr[1] = 0; - addr[2] = 0xa4; - addr[3] = 0x10 + (serial >> 24); - addr[4] = serial >> 16; - addr[5] = serial >> 8; - return 0; -} - -static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - strlcpy(info->bus_info, dev_name(dev->dev.parent), - sizeof(info->bus_info)); -} - -static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - cmd->supported = etherh_priv(dev)->supported; - ethtool_cmd_speed_set(cmd, SPEED_10); - cmd->duplex = DUPLEX_HALF; - cmd->port = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC; - cmd->autoneg = (dev->flags & IFF_AUTOMEDIA ? - AUTONEG_ENABLE : AUTONEG_DISABLE); - return 0; -} - -static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - switch (cmd->autoneg) { - case AUTONEG_ENABLE: - dev->flags |= IFF_AUTOMEDIA; - break; - - case AUTONEG_DISABLE: - switch (cmd->port) { - case PORT_TP: - dev->if_port = IF_PORT_10BASET; - break; - - case PORT_BNC: - dev->if_port = IF_PORT_10BASE2; - break; - - default: - return -EINVAL; - } - dev->flags &= ~IFF_AUTOMEDIA; - break; - - default: - return -EINVAL; - } - - etherh_setif(dev); - - return 0; -} - -static const struct ethtool_ops etherh_ethtool_ops = { - .get_settings = etherh_get_settings, - .set_settings = etherh_set_settings, - .get_drvinfo = etherh_get_drvinfo, -}; - -static const struct net_device_ops etherh_netdev_ops = { - .ndo_open = etherh_open, - .ndo_stop = etherh_close, - .ndo_set_config = etherh_set_config, - .ndo_start_xmit = __ei_start_xmit, - .ndo_tx_timeout = __ei_tx_timeout, - .ndo_get_stats = __ei_get_stats, - .ndo_set_multicast_list = __ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = __ei_poll, -#endif -}; - -static u32 etherh_regoffsets[16]; -static u32 etherm_regoffsets[16]; - -static int __devinit -etherh_probe(struct expansion_card *ec, const struct ecard_id *id) -{ - const struct etherh_data *data = id->data; - struct ei_device *ei_local; - struct net_device *dev; - struct etherh_priv *eh; - int ret; - - etherh_banner(); - - ret = ecard_request_resources(ec); - if (ret) - goto out; - - dev = ____alloc_ei_netdev(sizeof(struct etherh_priv)); - if (!dev) { - ret = -ENOMEM; - goto release; - } - - SET_NETDEV_DEV(dev, &ec->dev); - - dev->netdev_ops = ðerh_netdev_ops; - dev->irq = ec->irq; - dev->ethtool_ops = ðerh_ethtool_ops; - - if (data->supported & SUPPORTED_Autoneg) - dev->flags |= IFF_AUTOMEDIA; - if (data->supported & SUPPORTED_TP) { - dev->flags |= IFF_PORTSEL; - dev->if_port = IF_PORT_10BASET; - } else if (data->supported & SUPPORTED_BNC) { - dev->flags |= IFF_PORTSEL; - dev->if_port = IF_PORT_10BASE2; - } else - dev->if_port = IF_PORT_UNKNOWN; - - eh = etherh_priv(dev); - eh->supported = data->supported; - eh->ctrl = 0; - eh->id = ec->cid.product; - eh->memc = ecardm_iomap(ec, ECARD_RES_MEMC, 0, PAGE_SIZE); - if (!eh->memc) { - ret = -ENOMEM; - goto free; - } - - eh->ctrl_port = eh->memc; - if (data->ctrl_ioc) { - eh->ioc_fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, PAGE_SIZE); - if (!eh->ioc_fast) { - ret = -ENOMEM; - goto free; - } - eh->ctrl_port = eh->ioc_fast; - } - - dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset; - eh->dma_base = eh->memc + data->dataport_offset; - eh->ctrl_port += data->ctrlport_offset; - - /* - * IRQ and control port handling - only for non-NIC slot cards. - */ - if (ec->slot_no != 8) { - ecard_setirq(ec, ðerh_ops, eh); - } else { - /* - * If we're in the NIC slot, make sure the IRQ is enabled - */ - etherh_set_ctrl(eh, ETHERH_CP_IE); - } - - ei_local = netdev_priv(dev); - spin_lock_init(&ei_local->page_lock); - - if (ec->cid.product == PROD_ANT_ETHERM) { - etherm_addr(dev->dev_addr); - ei_local->reg_offset = etherm_regoffsets; - } else { - etherh_addr(dev->dev_addr, ec); - ei_local->reg_offset = etherh_regoffsets; - } - - ei_local->name = dev->name; - ei_local->word16 = 1; - ei_local->tx_start_page = data->tx_start_page; - ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES; - ei_local->stop_page = data->stop_page; - ei_local->reset_8390 = etherh_reset; - ei_local->block_input = etherh_block_input; - ei_local->block_output = etherh_block_output; - ei_local->get_8390_hdr = etherh_get_header; - ei_local->interface_num = 0; - - etherh_reset(dev); - __NS8390_init(dev, 0); - - ret = register_netdev(dev); - if (ret) - goto free; - - printk(KERN_INFO "%s: %s in slot %d, %pM\n", - dev->name, data->name, ec->slot_no, dev->dev_addr); - - ecard_set_drvdata(ec, dev); - - return 0; - - free: - free_netdev(dev); - release: - ecard_release_resources(ec); - out: - return ret; -} - -static void __devexit etherh_remove(struct expansion_card *ec) -{ - struct net_device *dev = ecard_get_drvdata(ec); - - ecard_set_drvdata(ec, NULL); - - unregister_netdev(dev); - - free_netdev(dev); - - ecard_release_resources(ec); -} - -static struct etherh_data etherm_data = { - .ns8390_offset = ETHERM_NS8390, - .dataport_offset = ETHERM_NS8390 + ETHERM_DATAPORT, - .ctrlport_offset = ETHERM_NS8390 + ETHERM_CTRLPORT, - .name = "ANT EtherM", - .supported = SUPPORTED_10baseT_Half, - .tx_start_page = ETHERM_TX_START_PAGE, - .stop_page = ETHERM_STOP_PAGE, -}; - -static struct etherh_data etherlan500_data = { - .ns8390_offset = ETHERH500_NS8390, - .dataport_offset = ETHERH500_NS8390 + ETHERH500_DATAPORT, - .ctrlport_offset = ETHERH500_CTRLPORT, - .ctrl_ioc = 1, - .name = "i3 EtherH 500", - .supported = SUPPORTED_10baseT_Half, - .tx_start_page = ETHERH_TX_START_PAGE, - .stop_page = ETHERH_STOP_PAGE, -}; - -static struct etherh_data etherlan600_data = { - .ns8390_offset = ETHERH600_NS8390, - .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT, - .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT, - .name = "i3 EtherH 600", - .supported = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg, - .tx_start_page = ETHERH_TX_START_PAGE, - .stop_page = ETHERH_STOP_PAGE, -}; - -static struct etherh_data etherlan600a_data = { - .ns8390_offset = ETHERH600_NS8390, - .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT, - .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT, - .name = "i3 EtherH 600A", - .supported = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg, - .tx_start_page = ETHERH_TX_START_PAGE, - .stop_page = ETHERH_STOP_PAGE, -}; - -static const struct ecard_id etherh_ids[] = { - { MANU_ANT, PROD_ANT_ETHERM, ðerm_data }, - { MANU_I3, PROD_I3_ETHERLAN500, ðerlan500_data }, - { MANU_I3, PROD_I3_ETHERLAN600, ðerlan600_data }, - { MANU_I3, PROD_I3_ETHERLAN600A, ðerlan600a_data }, - { 0xffff, 0xffff } -}; - -static struct ecard_driver etherh_driver = { - .probe = etherh_probe, - .remove = __devexit_p(etherh_remove), - .id_table = etherh_ids, - .drv = { - .name = DRV_NAME, - }, -}; - -static int __init etherh_init(void) -{ - int i; - - for (i = 0; i < 16; i++) { - etherh_regoffsets[i] = i << 2; - etherm_regoffsets[i] = i << 5; - } - - return ecard_register_driver(ðerh_driver); -} - -static void __exit etherh_exit(void) -{ - ecard_remove_driver(ðerh_driver); -} - -module_init(etherh_init); -module_exit(etherh_exit); |