diff options
Diffstat (limited to 'drivers/net/at1700.c')
-rw-r--r-- | drivers/net/at1700.c | 33 |
1 files changed, 15 insertions, 18 deletions
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c index e613cc28974..4aeca11f3ee 100644 --- a/drivers/net/at1700.c +++ b/drivers/net/at1700.c @@ -18,7 +18,7 @@ straight-forward Fujitsu MB86965 implementations. Modification for Fujitsu FMV-18X cards is done by Yutaka Tamiya - (tamy@flab.fujitsu.co.jp). + (tamy@flab.fujitsu.co.jp). Sources: The Fujitsu MB86965 datasheet. @@ -35,7 +35,6 @@ response to inb()s from other device probes! */ -#include <linux/config.h> #include <linux/errno.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -59,7 +58,7 @@ #include <asm/dma.h> static char version[] __initdata = - "at1700.c:v1.15 4/7/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; + "at1700.c:v1.16 9/11/06 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; #define DRV_NAME "at1700" @@ -169,7 +168,7 @@ static struct net_device_stats *net_get_stats(struct net_device *dev); static void set_rx_mode(struct net_device *dev); static void net_tx_timeout (struct net_device *dev); - + #ifdef CONFIG_MCA_LEGACY struct at1720_mca_adapters_struct { char* name; @@ -202,7 +201,7 @@ static void cleanup_card(struct net_device *dev) struct net_local *lp = netdev_priv(dev); if (lp->mca_slot >= 0) mca_mark_as_unused(lp->mca_slot); -#endif +#endif free_irq(dev->irq, NULL); release_region(dev->base_addr, AT1700_IO_EXTENT); } @@ -302,7 +301,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) for (j = 0; at1720_mca_adapters[j].name != NULL; j ++) { slot = 0; while (slot != MCA_NOTFOUND) { - + slot = mca_find_unused_adapter( at1720_mca_adapters[j].id, slot ); if (slot == MCA_NOTFOUND) break; @@ -316,7 +315,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i]) break; ioaddr = at1700_mca_probe_list[l_i]; - + for (irq = 0; irq < 0x10; irq++) if (((((pos4>>4) & 0x0f) | (pos3 & 0xf0)) & 0xff) == at1700_irq_pattern[irq]) break; @@ -329,7 +328,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) } dev->irq = irq; - + /* claim the slot */ mca_set_adapter_name( slot, at1720_mca_adapters[j].name ); mca_mark_as_used(slot); @@ -354,7 +353,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) else { goto err_out; } - + #ifdef CONFIG_MCA_LEGACY found: #endif @@ -488,7 +487,7 @@ err_out: return ret; } - + /* EEPROM_Ctrl bits. */ #define EE_SHIFT_CLK 0x40 /* EEPROM shift clock, in reg. 16. */ #define EE_CS 0x20 /* EEPROM chip select, in reg. 16. */ @@ -529,7 +528,7 @@ static int __init read_eeprom(long ioaddr, int location) return retval; } - + static int net_open(struct net_device *dev) { @@ -646,7 +645,7 @@ static int net_send_packet (struct sk_buff *skb, struct net_device *dev) return 0; } - + /* The typical workload of the driver: Handle the network interface interrupts. */ static irqreturn_t @@ -664,9 +663,9 @@ net_interrupt(int irq, void *dev_id, struct pt_regs *regs) ioaddr = dev->base_addr; lp = netdev_priv(dev); - + spin_lock (&lp->lock); - + status = inw(ioaddr + TX_STATUS); outw(status, ioaddr + TX_STATUS); @@ -852,8 +851,6 @@ set_rx_mode(struct net_device *dev) int i; if (dev->flags & IFF_PROMISC) { - /* Unconditionally log net taps. */ - printk("%s: Promiscuous mode enabled.\n", dev->name); memset(mc_filter, 0xff, sizeof(mc_filter)); outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ } else if (dev->mc_count > MC_FILTERBREAK @@ -902,7 +899,7 @@ MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address"); MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number"); MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)"); -int init_module(void) +int __init init_module(void) { if (io == 0) printk("at1700: You should not use auto-probing with insmod!\n"); @@ -922,7 +919,7 @@ cleanup_module(void) #endif /* MODULE */ MODULE_LICENSE("GPL"); - + /* * Local variables: * compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c at1700.c" |