summaryrefslogtreecommitdiffstats
path: root/drivers/net/atl1/atl1_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/atl1/atl1_main.c')
-rw-r--r--drivers/net/atl1/atl1_main.c17
1 files changed, 11 insertions, 6 deletions
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index f23e13c8f9a..35b0a7dd4ef 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -76,7 +76,6 @@
#include <linux/compiler.h>
#include <linux/delay.h>
#include <linux/mii.h>
-#include <linux/interrupt.h>
#include <net/checksum.h>
#include <asm/atomic.h>
@@ -1368,7 +1367,6 @@ rrd_ok:
if (count) {
u32 tpd_next_to_use;
u32 rfd_next_to_use;
- u32 rrd_next_to_clean;
spin_lock(&adapter->mb_lock);
@@ -1513,7 +1511,7 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
unsigned int f;
u16 tpd_next_to_use;
u16 proto_hdr_len;
- u16 i, m, len12;
+ u16 len12;
first_buf_len -= skb->data_len;
nr_frags = skb_shinfo(skb)->nr_frags;
@@ -1537,6 +1535,8 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
tpd_next_to_use = 0;
if (first_buf_len > proto_hdr_len) {
+ int i, m;
+
len12 = first_buf_len - proto_hdr_len;
m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) /
ATL1_MAX_TX_BUF_LEN;
@@ -2210,8 +2210,14 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
return err;
/*
- * 64-bit DMA currently has data corruption problems, so let's just
- * use 32-bit DMA for now. This is a big hack that is probably wrong.
+ * The atl1 chip can DMA to 64-bit addresses, but it uses a single
+ * shared register for the high 32 bits, so only a single, aligned,
+ * 4 GB physical address range can be used at a time.
+ *
+ * Supporting 64-bit DMA on this hardware is more trouble than it's
+ * worth. It is far easier to limit to 32-bit DMA than update
+ * various kernel subsystems to support the mechanics required by a
+ * fixed-high-32-bit system.
*/
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
@@ -2235,7 +2241,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
err = -ENOMEM;
goto err_alloc_etherdev;
}
- SET_MODULE_OWNER(netdev);
SET_NETDEV_DEV(netdev, &pdev->dev);
pci_set_drvdata(pdev, netdev);