diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index d45b1555a60..ba15bdc5a1a 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -778,9 +778,9 @@ static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp, { u32 nig_reg_adress_crd_weight = 0; u32 pbf_reg_adress_crd_weight = 0; - /* Calculate and set BW for this COS*/ - const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw; - const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw; + /* Calculate and set BW for this COS - use 1 instead of 0 for BW */ + const u32 cos_bw_nig = ((bw ? bw : 1) * min_w_val_nig) / total_bw; + const u32 cos_bw_pbf = ((bw ? bw : 1) * min_w_val_pbf) / total_bw; switch (cos_entry) { case 0: @@ -852,18 +852,12 @@ static int bnx2x_ets_e3b0_get_total_bw( /* Calculate total BW requested */ for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) { if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) { - - if (0 == ets_params->cos[cos_idx].params.bw_params.bw) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW" - "was set to 0\n"); - return -EINVAL; + *total_bw += + ets_params->cos[cos_idx].params.bw_params.bw; } - *total_bw += - ets_params->cos[cos_idx].params.bw_params.bw; - } } - /*Check taotl BW is valid */ + /* Check total BW is valid */ if ((100 != *total_bw) || (0 == *total_bw)) { if (0 == *total_bw) { DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW" @@ -1726,7 +1720,7 @@ static int bnx2x_xmac_enable(struct link_params *params, /* Check loopback mode */ if (lb) - val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK; + val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK; REG_WR(bp, xmac_base + XMAC_REG_CTRL, val); bnx2x_set_xumac_nig(params, ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); @@ -3630,6 +3624,12 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16); + /* Advertised and set FEC (Forward Error Correction) */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2, + (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY | + MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ)); + /* Enable CL37 BAM */ if (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info. @@ -5924,7 +5924,7 @@ int bnx2x_set_led(struct link_params *params, (tmp | EMAC_LED_OVERRIDE)); /* * return here without enabling traffic - * LED blink andsetting rate in ON mode. + * LED blink and setting rate in ON mode. * In oper mode, enabling LED blink * and setting rate is needed. */ @@ -5936,7 +5936,11 @@ int bnx2x_set_led(struct link_params *params, * This is a work-around for HW issue found when link * is up in CL73 */ - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + if ((!CHIP_IS_E3(bp)) || + (CHIP_IS_E3(bp) && + mode == LED_MODE_ON)) + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + if (CHIP_IS_E1x(bp) || CHIP_IS_E2(bp) || (mode == LED_MODE_ON)) @@ -10638,8 +10642,7 @@ static struct bnx2x_phy phy_warpcore = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_HW_LOCK_REQUIRED, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10765,8 +10768,7 @@ static struct bnx2x_phy phy_8706 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_INIT_XGXS_FIRST | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_INIT_XGXS_FIRST, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10797,8 +10799,7 @@ static struct bnx2x_phy phy_8726 = { .addr = 0xff, .def_md_devad = 0, .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_INIT_XGXS_FIRST | - FLAGS_TX_ERROR_CHECK), + FLAGS_INIT_XGXS_FIRST), .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10829,8 +10830,7 @@ static struct bnx2x_phy phy_8727 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_FAN_FAILURE_DET_REQ | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_FAN_FAILURE_DET_REQ, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, |