summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/bnx2x_link.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.h')
-rw-r--r--drivers/net/bnx2x/bnx2x_link.h183
1 files changed, 138 insertions, 45 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
index 92f36b6950d..6a7708d5da3 100644
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/bnx2x/bnx2x_link.h
@@ -33,12 +33,13 @@
#define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
#define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
+#define NET_SERDES_IF_XFI 1
+#define NET_SERDES_IF_SFI 2
+#define NET_SERDES_IF_KR 3
+#define NET_SERDES_IF_DXGXS 4
+
#define SPEED_AUTO_NEG 0
-#define SPEED_12000 12000
-#define SPEED_12500 12500
-#define SPEED_13000 13000
-#define SPEED_15000 15000
-#define SPEED_16000 16000
+#define SPEED_20000 20000
#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14
#define SFP_EEPROM_VENDOR_NAME_SIZE 16
@@ -46,6 +47,12 @@
#define SFP_EEPROM_VENDOR_OUI_SIZE 3
#define SFP_EEPROM_PART_NO_ADDR 0x28
#define SFP_EEPROM_PART_NO_SIZE 16
+#define SFP_EEPROM_REVISION_ADDR 0x38
+#define SFP_EEPROM_REVISION_SIZE 4
+#define SFP_EEPROM_SERIAL_ADDR 0x44
+#define SFP_EEPROM_SERIAL_SIZE 16
+#define SFP_EEPROM_DATE_ADDR 0x54 /* ASCII YYMMDD */
+#define SFP_EEPROM_DATE_SIZE 6
#define PWR_FLT_ERR_MSG_LEN 250
#define XGXS_EXT_PHY_TYPE(ext_phy_config) \
@@ -62,25 +69,26 @@
#define SINGLE_MEDIA(params) (params->num_phys == 2)
/* Dual Media board contains two external phy with different media */
#define DUAL_MEDIA(params) (params->num_phys == 3)
+
+#define FW_PARAM_PHY_ADDR_MASK 0x000000FF
+#define FW_PARAM_PHY_TYPE_MASK 0x0000FF00
+#define FW_PARAM_MDIO_CTRL_MASK 0xFFFF0000
#define FW_PARAM_MDIO_CTRL_OFFSET 16
+#define FW_PARAM_PHY_ADDR(fw_param) (fw_param & \
+ FW_PARAM_PHY_ADDR_MASK)
+#define FW_PARAM_PHY_TYPE(fw_param) (fw_param & \
+ FW_PARAM_PHY_TYPE_MASK)
+#define FW_PARAM_MDIO_CTRL(fw_param) ((fw_param & \
+ FW_PARAM_MDIO_CTRL_MASK) >> \
+ FW_PARAM_MDIO_CTRL_OFFSET)
#define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \
(phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET)
-#define PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE 170
-#define PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE 0
-
-#define PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE 250
-#define PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE 0
-
-#define PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE 10
-#define PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE 90
-
-#define PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE 50
-#define PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE 250
#define PFC_BRB_FULL_LB_XOFF_THRESHOLD 170
#define PFC_BRB_FULL_LB_XON_THRESHOLD 250
+#define MAXVAL(a, b) (((a) > (b)) ? (a) : (b))
/***********************************************************/
/* Structs */
/***********************************************************/
@@ -121,8 +129,8 @@ struct bnx2x_phy {
/* Loaded during init */
u8 addr;
-
- u8 flags;
+ u8 def_md_devad;
+ u16 flags;
/* Require HW lock */
#define FLAGS_HW_LOCK_REQUIRED (1<<0)
/* No Over-Current detection */
@@ -131,11 +139,13 @@ struct bnx2x_phy {
#define FLAGS_FAN_FAILURE_DET_REQ (1<<2)
/* Initialize first the XGXS and only then the phy itself */
#define FLAGS_INIT_XGXS_FIRST (1<<3)
+#define FLAGS_WC_DUAL_MODE (1<<4)
+#define FLAGS_4_PORT_MODE (1<<5)
#define FLAGS_REARM_LATCH_SIGNAL (1<<6)
#define FLAGS_SFP_NOT_APPROVED (1<<7)
+#define FLAGS_MDC_MDIO_WA (1<<8)
+#define FLAGS_DUMMY_READ (1<<9)
- u8 def_md_devad;
- u8 reserved;
/* preemphasis values for the rx side */
u16 rx_preemphasis[4];
@@ -153,6 +163,8 @@ struct bnx2x_phy {
#define ETH_PHY_XFP_FIBER 0x2
#define ETH_PHY_DA_TWINAX 0x3
#define ETH_PHY_BASE_T 0x4
+#define ETH_PHY_KR 0xf0
+#define ETH_PHY_CX4 0xf1
#define ETH_PHY_NOT_PRESENT 0xff
/* The address in which version is located*/
@@ -238,6 +250,8 @@ struct link_params {
#define FEATURE_CONFIG_PFC_ENABLED (1<<1)
#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
#define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3)
+#define FEATURE_CONFIG_AUTOGREEEN_ENABLED (1<<9)
+#define FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED (1<<10)
/* Will be populated during common init */
struct bnx2x_phy phy[MAX_PHYS];
@@ -257,11 +271,19 @@ struct link_params {
/* Output parameters */
struct link_vars {
u8 phy_flags;
+#define PHY_XGXS_FLAG (1<<0)
+#define PHY_SGMII_FLAG (1<<1)
+#define PHY_PHYSICAL_LINK_FLAG (1<<2)
+#define PHY_HALF_OPEN_CONN_FLAG (1<<3)
+#define PHY_OVER_CURRENT_FLAG (1<<4)
+#define PHY_TX_ERROR_CHECK_FLAG (1<<5)
u8 mac_type;
#define MAC_TYPE_NONE 0
#define MAC_TYPE_EMAC 1
#define MAC_TYPE_BMAC 2
+#define MAC_TYPE_UMAC 3
+#define MAC_TYPE_XMAC 4
u8 phy_link_up; /* internal phy link indication */
u8 link_up;
@@ -274,45 +296,52 @@ struct link_vars {
/* The same definitions as the shmem parameter */
u32 link_status;
+ u8 fault_detected;
+ u8 rsrv1;
+ u16 periodic_flags;
+#define PERIODIC_FLAGS_LINK_EVENT 0x0001
+
+ u32 aeu_int_mask;
};
/***********************************************************/
/* Functions */
/***********************************************************/
-u8 bnx2x_phy_init(struct link_params *input, struct link_vars *output);
+int bnx2x_phy_init(struct link_params *params, struct link_vars *vars);
/* Reset the link. Should be called when driver or interface goes down
Before calling phy firmware upgrade, the reset_ext_phy should be set
to 0 */
-u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
- u8 reset_ext_phy);
+int bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
+ u8 reset_ext_phy);
/* bnx2x_link_update should be called upon link interrupt */
-u8 bnx2x_link_update(struct link_params *input, struct link_vars *output);
+int bnx2x_link_update(struct link_params *params, struct link_vars *vars);
/* use the following phy functions to read/write from external_phy
In order to use it to read/write internal phy registers, use
DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as
the register */
-u8 bnx2x_phy_read(struct link_params *params, u8 phy_addr,
- u8 devad, u16 reg, u16 *ret_val);
+int bnx2x_phy_read(struct link_params *params, u8 phy_addr,
+ u8 devad, u16 reg, u16 *ret_val);
+
+int bnx2x_phy_write(struct link_params *params, u8 phy_addr,
+ u8 devad, u16 reg, u16 val);
-u8 bnx2x_phy_write(struct link_params *params, u8 phy_addr,
- u8 devad, u16 reg, u16 val);
/* Reads the link_status from the shmem,
and update the link vars accordingly */
void bnx2x_link_status_update(struct link_params *input,
struct link_vars *output);
/* returns string representing the fw_version of the external phy */
-u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
- u8 *version, u16 len);
+int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
+ u8 *version, u16 len);
/* Set/Unset the led
Basically, the CLC takes care of the led for the link, but in case one needs
to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
blink the led, and LED_MODE_OFF to set the led off.*/
-u8 bnx2x_set_led(struct link_params *params, struct link_vars *vars,
- u8 mode, u32 speed);
+int bnx2x_set_led(struct link_params *params,
+ struct link_vars *vars, u8 mode, u32 speed);
#define LED_MODE_OFF 0
#define LED_MODE_ON 1
#define LED_MODE_OPER 2
@@ -324,12 +353,12 @@ void bnx2x_handle_module_detect_int(struct link_params *params);
/* Get the actual link status. In case it returns 0, link is up,
otherwise link is down*/
-u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars,
- u8 is_serdes);
+int bnx2x_test_link(struct link_params *params, struct link_vars *vars,
+ u8 is_serdes);
/* One-time initialization for external phy after power up */
-u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[],
- u32 shmem2_base_path[], u32 chip_id);
+int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[],
+ u32 shmem2_base_path[], u32 chip_id);
/* Reset the external PHY using GPIO */
void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
@@ -338,9 +367,9 @@ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy);
/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */
-u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
- struct link_params *params, u16 addr,
- u8 byte_cnt, u8 *o_buf);
+int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
+ struct link_params *params, u16 addr,
+ u8 byte_cnt, u8 *o_buf);
void bnx2x_hw_reset_phy(struct link_params *params);
@@ -352,11 +381,28 @@ u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base,
u32 bnx2x_phy_selection(struct link_params *params);
/* Probe the phys on board, and populate them in "params" */
-u8 bnx2x_phy_probe(struct link_params *params);
+int bnx2x_phy_probe(struct link_params *params);
+
/* Checks if fan failure detection is required on one of the phys on board */
u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base,
u32 shmem2_base, u8 port);
+
+
+/* DCBX structs */
+
+/* Number of maximum COS per chip */
+#define DCBX_E2E3_MAX_NUM_COS (2)
+#define DCBX_E3B0_MAX_NUM_COS_PORT0 (6)
+#define DCBX_E3B0_MAX_NUM_COS_PORT1 (3)
+#define DCBX_E3B0_MAX_NUM_COS ( \
+ MAXVAL(DCBX_E3B0_MAX_NUM_COS_PORT0, \
+ DCBX_E3B0_MAX_NUM_COS_PORT1))
+
+#define DCBX_MAX_NUM_COS ( \
+ MAXVAL(DCBX_E3B0_MAX_NUM_COS, \
+ DCBX_E2E3_MAX_NUM_COS))
+
/* PFC port configuration params */
struct bnx2x_nig_brb_pfc_port_params {
/* NIG */
@@ -364,8 +410,8 @@ struct bnx2x_nig_brb_pfc_port_params {
u32 llfc_out_en;
u32 llfc_enable;
u32 pkt_priority_to_cos;
- u32 rx_cos0_priority_mask;
- u32 rx_cos1_priority_mask;
+ u8 num_of_rx_cos_priority_mask;
+ u32 rx_cos_priority_mask[DCBX_MAX_NUM_COS];
u32 llfc_high_priority_classes;
u32 llfc_low_priority_classes;
/* BRB */
@@ -373,27 +419,74 @@ struct bnx2x_nig_brb_pfc_port_params {
u32 cos1_pauseable;
};
+
+/* ETS port configuration params */
+struct bnx2x_ets_bw_params {
+ u8 bw;
+};
+
+struct bnx2x_ets_sp_params {
+ /**
+ * valid values are 0 - 5. 0 is highest strict priority.
+ * There can't be two COS's with the same pri.
+ */
+ u8 pri;
+};
+
+enum bnx2x_cos_state {
+ bnx2x_cos_state_strict = 0,
+ bnx2x_cos_state_bw = 1,
+};
+
+struct bnx2x_ets_cos_params {
+ enum bnx2x_cos_state state ;
+ union {
+ struct bnx2x_ets_bw_params bw_params;
+ struct bnx2x_ets_sp_params sp_params;
+ } params;
+};
+
+struct bnx2x_ets_params {
+ u8 num_of_cos; /* Number of valid COS entries*/
+ struct bnx2x_ets_cos_params cos[DCBX_MAX_NUM_COS];
+};
+
/**
* Used to update the PFC attributes in EMAC, BMAC, NIG and BRB
* when link is already up
*/
-void bnx2x_update_pfc(struct link_params *params,
+int bnx2x_update_pfc(struct link_params *params,
struct link_vars *vars,
struct bnx2x_nig_brb_pfc_port_params *pfc_params);
/* Used to configure the ETS to disable */
-void bnx2x_ets_disabled(struct link_params *params);
+int bnx2x_ets_disabled(struct link_params *params,
+ struct link_vars *vars);
/* Used to configure the ETS to BW limited */
void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
const u32 cos1_bw);
/* Used to configure the ETS to strict */
-u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);
+int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);
+
+/* Configure the COS to ETS according to BW and SP settings.*/
+int bnx2x_ets_e3b0_config(const struct link_params *params,
+ const struct link_vars *vars,
+ const struct bnx2x_ets_params *ets_params);
/* Read pfc statistic*/
void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars,
u32 pfc_frames_sent[2],
u32 pfc_frames_received[2]);
+void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars,
+ u32 chip_id, u32 shmem_base, u32 shmem2_base,
+ u8 port);
+
+int bnx2x_sfp_module_detection(struct bnx2x_phy *phy,
+ struct link_params *params);
+
+void bnx2x_period_func(struct link_params *params, struct link_vars *vars);
+
#endif /* BNX2X_LINK_H */