diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_reg.h | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index 1cefe489a95..38ef7ca9f21 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -18,6 +18,8 @@ * WR - Write Clear (write 1 to clear the bit) * */ +#ifndef BNX2X_REG_H +#define BNX2X_REG_H #define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) #define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2) @@ -39,6 +41,8 @@ #define BRB1_REG_BRB1_PRTY_MASK 0x60138 /* [R 4] Parity register #0 read */ #define BRB1_REG_BRB1_PRTY_STS 0x6012c +/* [RC 4] Parity register #0 read clear */ +#define BRB1_REG_BRB1_PRTY_STS_CLR 0x60130 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning - @@ -132,8 +136,12 @@ #define CCM_REG_CCM_INT_MASK 0xd01e4 /* [R 11] Interrupt register #0 read */ #define CCM_REG_CCM_INT_STS 0xd01d8 +/* [RW 27] Parity mask register #0 read/write */ +#define CCM_REG_CCM_PRTY_MASK 0xd01f4 /* [R 27] Parity register #0 read */ #define CCM_REG_CCM_PRTY_STS 0xd01e8 +/* [RC 27] Parity register #0 read clear */ +#define CCM_REG_CCM_PRTY_STS_CLR 0xd01ec /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -350,6 +358,8 @@ #define CDU_REG_CDU_PRTY_MASK 0x10104c /* [R 5] Parity register #0 read */ #define CDU_REG_CDU_PRTY_STS 0x101040 +/* [RC 5] Parity register #0 read clear */ +#define CDU_REG_CDU_PRTY_STS_CLR 0x101044 /* [RC 32] logging of error data in case of a CDU load error: {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error; ype_error; ctual_active; ctual_compressed_context}; */ @@ -381,6 +391,8 @@ #define CFC_REG_CFC_PRTY_MASK 0x104118 /* [R 4] Parity register #0 read */ #define CFC_REG_CFC_PRTY_STS 0x10410c +/* [RC 4] Parity register #0 read clear */ +#define CFC_REG_CFC_PRTY_STS_CLR 0x104110 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */ #define CFC_REG_CID_CAM 0x104800 #define CFC_REG_CONTROL0 0x104028 @@ -466,6 +478,8 @@ #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc /* [R 11] Parity register #0 read */ #define CSDM_REG_CSDM_PRTY_STS 0xc22b0 +/* [RC 11] Parity register #0 read clear */ +#define CSDM_REG_CSDM_PRTY_STS_CLR 0xc22b4 #define CSDM_REG_ENABLE_IN1 0xc2238 #define CSDM_REG_ENABLE_IN2 0xc223c #define CSDM_REG_ENABLE_OUT1 0xc2240 @@ -556,6 +570,9 @@ /* [R 32] Parity register #0 read */ #define CSEM_REG_CSEM_PRTY_STS_0 0x200124 #define CSEM_REG_CSEM_PRTY_STS_1 0x200134 +/* [RC 32] Parity register #0 read clear */ +#define CSEM_REG_CSEM_PRTY_STS_CLR_0 0x200128 +#define CSEM_REG_CSEM_PRTY_STS_CLR_1 0x200138 #define CSEM_REG_ENABLE_IN 0x2000a4 #define CSEM_REG_ENABLE_OUT 0x2000a8 /* [RW 32] This address space contains all registers and memories that are @@ -648,6 +665,8 @@ #define DBG_REG_DBG_PRTY_MASK 0xc0a8 /* [R 1] Parity register #0 read */ #define DBG_REG_DBG_PRTY_STS 0xc09c +/* [RC 1] Parity register #0 read clear */ +#define DBG_REG_DBG_PRTY_STS_CLR 0xc0a0 /* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0; * 4.Completion function=0; 5.Error handling=0 */ @@ -668,6 +687,8 @@ #define DMAE_REG_DMAE_PRTY_MASK 0x102064 /* [R 4] Parity register #0 read */ #define DMAE_REG_DMAE_PRTY_STS 0x102058 +/* [RC 4] Parity register #0 read clear */ +#define DMAE_REG_DMAE_PRTY_STS_CLR 0x10205c /* [RW 1] Command 0 go. */ #define DMAE_REG_GO_C0 0x102080 /* [RW 1] Command 1 go. */ @@ -734,6 +755,8 @@ #define DORQ_REG_DORQ_PRTY_MASK 0x170190 /* [R 2] Parity register #0 read */ #define DORQ_REG_DORQ_PRTY_STS 0x170184 +/* [RC 2] Parity register #0 read clear */ +#define DORQ_REG_DORQ_PRTY_STS_CLR 0x170188 /* [RW 8] The address to write the DPM CID to STORM. */ #define DORQ_REG_DPM_CID_ADDR 0x170044 /* [RW 5] The DPM mode CID extraction offset. */ @@ -842,8 +865,12 @@ /* [R 1] data availble for error memory. If this bit is clear do not red * from error_handling_memory. */ #define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130 +/* [RW 11] Parity mask register #0 read/write */ +#define IGU_REG_IGU_PRTY_MASK 0x1300a8 /* [R 11] Parity register #0 read */ #define IGU_REG_IGU_PRTY_STS 0x13009c +/* [RC 11] Parity register #0 read clear */ +#define IGU_REG_IGU_PRTY_STS_CLR 0x1300a0 /* [R 4] Debug: int_handle_fsm */ #define IGU_REG_INT_HANDLE_FSM 0x130050 #define IGU_REG_LEADING_EDGE_LATCH 0x130134 @@ -1501,6 +1528,8 @@ #define MISC_REG_MISC_PRTY_MASK 0xa398 /* [R 1] Parity register #0 read */ #define MISC_REG_MISC_PRTY_STS 0xa38c +/* [RC 1] Parity register #0 read clear */ +#define MISC_REG_MISC_PRTY_STS_CLR 0xa390 #define MISC_REG_NIG_WOL_P0 0xa270 #define MISC_REG_NIG_WOL_P1 0xa274 /* [R 1] If set indicate that the pcie_rst_b was asserted without perst @@ -1615,6 +1644,8 @@ #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4) #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2) #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3) +#define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN (0x1<<0) +#define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN (0x1<<0) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15) @@ -1744,12 +1775,16 @@ ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same port */ #define NIG_REG_LLFC_ENABLE_0 0x16208 +#define NIG_REG_LLFC_ENABLE_1 0x1620c /* [RW 16] classes are high-priority for port0 */ #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058 +#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 0x1605c /* [RW 16] classes are low-priority for port0 */ #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060 +#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 0x16064 /* [RW 1] Output enable of message to LLFC BMAC IF for port0 */ #define NIG_REG_LLFC_OUT_EN_0 0x160c8 +#define NIG_REG_LLFC_OUT_EN_1 0x160cc #define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c #define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154 #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244 @@ -1774,6 +1809,8 @@ /* [RW 8] event id for llh0 */ #define NIG_REG_LLH0_EVENT_ID 0x10084 #define NIG_REG_LLH0_FUNC_EN 0x160fc +#define NIG_REG_LLH0_FUNC_MEM 0x16180 +#define NIG_REG_LLH0_FUNC_MEM_ENABLE 0x16140 #define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100 /* [RW 1] Determine the IP version to look for in ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */ @@ -1797,6 +1834,9 @@ #define NIG_REG_LLH1_ERROR_MASK 0x10090 /* [RW 8] event id for llh1 */ #define NIG_REG_LLH1_EVENT_ID 0x10088 +#define NIG_REG_LLH1_FUNC_MEM 0x161c0 +#define NIG_REG_LLH1_FUNC_MEM_ENABLE 0x16160 +#define NIG_REG_LLH1_FUNC_MEM_SIZE 16 /* [RW 8] init credit counter for port1 in LLH */ #define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564 #define NIG_REG_LLH1_XCM_MASK 0x10134 @@ -1907,11 +1947,17 @@ ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same port */ #define NIG_REG_PAUSE_ENABLE_0 0x160c0 +#define NIG_REG_PAUSE_ENABLE_1 0x160c4 /* [RW 1] Input enable for RX PBF LP IF */ #define NIG_REG_PBF_LB_IN_EN 0x100b4 /* [RW 1] Value of this register will be transmitted to port swap when ~nig_registers_strap_override.strap_override =1 */ #define NIG_REG_PORT_SWAP 0x10394 +/* [RW 1] PPP enable for port0. This register may get 1 only when + * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the + * same port */ +#define NIG_REG_PPP_ENABLE_0 0x160b0 +#define NIG_REG_PPP_ENABLE_1 0x160b4 /* [RW 1] output enable for RX parser descriptor IF */ #define NIG_REG_PRS_EOP_OUT_EN 0x10104 /* [RW 1] Input enable for RX parser request IF */ @@ -1978,6 +2024,14 @@ #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15) #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18) #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18 +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */ +#define PBF_REG_COS0_UPPER_BOUND 0x15c05c +/* [RW 31] The weight of COS0 in the ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT 0x15c054 +/* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */ +#define PBF_REG_COS1_UPPER_BOUND 0x15c060 +/* [RW 31] The weight of COS1 in the ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT 0x15c058 /* [RW 1] Disable processing further tasks from port 0 (after ending the current task in process). */ #define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c @@ -1988,9 +2042,16 @@ current task in process). */ #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c #define PBF_REG_DISABLE_PF 0x1402e8 +/* [RW 1] Indicates that ETS is performed between the COSes in the command + * arbiter. If reset strict priority w/ anti-starvation will be performed + * w/o WFQ. */ +#define PBF_REG_ETS_ENABLED 0x15c050 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic * Ethernet header. */ #define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8 +/* [RW 1] Indicates which COS is conncted to the highest priority in the + * command arbiter. */ +#define PBF_REG_HIGH_PRIORITY_COS_NUM 0x15c04c #define PBF_REG_IF_ENABLE_REG 0x140044 /* [RW 1] Init bit. When set the initial credits are copied to the credit registers (except the port credits). Should be set and then reset after @@ -2016,6 +2077,10 @@ #define PBF_REG_MAC_LB_ENABLE 0x140040 /* [RW 6] Bit-map indicating which headers must appear in the packet */ #define PBF_REG_MUST_HAVE_HDRS 0x15c0c4 +/* [RW 16] The number of strict priority arbitration slots between 2 RR + * arbitration slots. A value of 0 means no strict priority cycles; i.e. the + * strict-priority w/ anti-starvation arbiter is a RR arbiter. */ +#define PBF_REG_NUM_STRICT_ARB_SLOTS 0x15c064 /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause not suppoterd. */ #define PBF_REG_P0_ARB_THRSH 0x1400e4 @@ -2046,6 +2111,10 @@ #define PBF_REG_PBF_INT_MASK 0x1401d4 /* [R 5] Interrupt register #0 read */ #define PBF_REG_PBF_INT_STS 0x1401c8 +/* [RW 20] Parity mask register #0 read/write */ +#define PBF_REG_PBF_PRTY_MASK 0x1401e4 +/* [RC 20] Parity register #0 read clear */ +#define PBF_REG_PBF_PRTY_STS_CLR 0x1401dc #define PB_REG_CONTROL 0 /* [RW 2] Interrupt mask register #0 read/write */ #define PB_REG_PB_INT_MASK 0x28 @@ -2055,6 +2124,8 @@ #define PB_REG_PB_PRTY_MASK 0x38 /* [R 4] Parity register #0 read */ #define PB_REG_PB_PRTY_STS 0x2c +/* [RC 4] Parity register #0 read clear */ +#define PB_REG_PB_PRTY_STS_CLR 0x30 #define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0) #define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8) #define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1) @@ -2410,6 +2481,8 @@ #define PRS_REG_PRS_PRTY_MASK 0x401a4 /* [R 8] Parity register #0 read */ #define PRS_REG_PRS_PRTY_STS 0x40198 +/* [RC 8] Parity register #0 read clear */ +#define PRS_REG_PRS_PRTY_STS_CLR 0x4019c /* [RW 8] Context region for pure acknowledge packets. Used in CFC load request message */ #define PRS_REG_PURE_REGIONS 0x40024 @@ -2563,6 +2636,9 @@ /* [R 32] Parity register #0 read */ #define PXP2_REG_PXP2_PRTY_STS_0 0x12057c #define PXP2_REG_PXP2_PRTY_STS_1 0x12058c +/* [RC 32] Parity register #0 read clear */ +#define PXP2_REG_PXP2_PRTY_STS_CLR_0 0x120580 +#define PXP2_REG_PXP2_PRTY_STS_CLR_1 0x120590 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives indication about backpressure) */ #define PXP2_REG_RD_ALMOST_FULL_0 0x120424 @@ -2965,6 +3041,8 @@ #define PXP_REG_PXP_PRTY_MASK 0x103094 /* [R 26] Parity register #0 read */ #define PXP_REG_PXP_PRTY_STS 0x103088 +/* [RC 27] Parity register #0 read clear */ +#define PXP_REG_PXP_PRTY_STS_CLR 0x10308c /* [RW 4] The activity counter initial increment value sent in the load request */ #define QM_REG_ACTCTRINITVAL_0 0x168040 @@ -3121,6 +3199,8 @@ #define QM_REG_QM_PRTY_MASK 0x168454 /* [R 12] Parity register #0 read */ #define QM_REG_QM_PRTY_STS 0x168448 +/* [RC 12] Parity register #0 read clear */ +#define QM_REG_QM_PRTY_STS_CLR 0x16844c /* [R 32] Current queues in pipeline: Queues from 32 to 63 */ #define QM_REG_QSTATUS_HIGH 0x16802c /* [R 32] Current queues in pipeline: Queues from 96 to 127 */ @@ -3406,6 +3486,8 @@ #define QM_REG_WRRWEIGHTS_9 0x168848 /* [R 6] Keep the fill level of the fifo from write client 1 */ #define QM_REG_XQM_WRC_FIFOLVL 0x168000 +/* [W 1] reset to parity interrupt */ +#define SEM_FAST_REG_PARITY_RST 0x18840 #define SRC_REG_COUNTFREE0 0x40500 /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two ports. If set the searcher support 8 functions. */ @@ -3434,6 +3516,8 @@ #define SRC_REG_SRC_PRTY_MASK 0x404c8 /* [R 3] Parity register #0 read */ #define SRC_REG_SRC_PRTY_STS 0x404bc +/* [RC 3] Parity register #0 read clear */ +#define SRC_REG_SRC_PRTY_STS_CLR 0x404c0 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */ #define TCM_REG_CAM_OCCUP 0x5017c /* [RW 1] CDU AG read Interface enable. If 0 - the request input is @@ -3560,8 +3644,12 @@ #define TCM_REG_TCM_INT_MASK 0x501dc /* [R 11] Interrupt register #0 read */ #define TCM_REG_TCM_INT_STS 0x501d0 +/* [RW 27] Parity mask register #0 read/write */ +#define TCM_REG_TCM_PRTY_MASK 0x501ec /* [R 27] Parity register #0 read */ #define TCM_REG_TCM_PRTY_STS 0x501e0 +/* [RC 27] Parity register #0 read clear */ +#define TCM_REG_TCM_PRTY_STS_CLR 0x501e4 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -3719,6 +3807,10 @@ #define TM_REG_TM_INT_MASK 0x1640fc /* [R 1] Interrupt register #0 read */ #define TM_REG_TM_INT_STS 0x1640f0 +/* [RW 7] Parity mask register #0 read/write */ +#define TM_REG_TM_PRTY_MASK 0x16410c +/* [RC 7] Parity register #0 read clear */ +#define TM_REG_TM_PRTY_STS_CLR 0x164104 /* [RW 8] The event id for aggregated interrupt 0 */ #define TSDM_REG_AGG_INT_EVENT_0 0x42038 #define TSDM_REG_AGG_INT_EVENT_1 0x4203c @@ -3799,6 +3891,8 @@ #define TSDM_REG_TSDM_PRTY_MASK 0x422bc /* [R 11] Parity register #0 read */ #define TSDM_REG_TSDM_PRTY_STS 0x422b0 +/* [RC 11] Parity register #0 read clear */ +#define TSDM_REG_TSDM_PRTY_STS_CLR 0x422b4 /* [RW 5] The number of time_slots in the arbitration cycle */ #define TSEM_REG_ARB_CYCLE_SIZE 0x180034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -3878,6 +3972,9 @@ #define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0 /* [RW 8] List of free threads . There is a bit per thread. */ #define TSEM_REG_THREADS_LIST 0x1802e4 +/* [RC 32] Parity register #0 read clear */ +#define TSEM_REG_TSEM_PRTY_STS_CLR_0 0x180118 +#define TSEM_REG_TSEM_PRTY_STS_CLR_1 0x180128 /* [RW 3] The arbitration scheme of time_slot 0 */ #define TSEM_REG_TS_0_AS 0x180038 /* [RW 3] The arbitration scheme of time_slot 10 */ @@ -4080,6 +4177,8 @@ #define UCM_REG_UCM_INT_STS 0xe01c8 /* [R 27] Parity register #0 read */ #define UCM_REG_UCM_PRTY_STS 0xe01d8 +/* [RC 27] Parity register #0 read clear */ +#define UCM_REG_UCM_PRTY_STS_CLR 0xe01dc /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -4256,6 +4355,8 @@ #define USDM_REG_USDM_PRTY_MASK 0xc42c0 /* [R 11] Parity register #0 read */ #define USDM_REG_USDM_PRTY_STS 0xc42b4 +/* [RC 11] Parity register #0 read clear */ +#define USDM_REG_USDM_PRTY_STS_CLR 0xc42b8 /* [RW 5] The number of time_slots in the arbitration cycle */ #define USEM_REG_ARB_CYCLE_SIZE 0x300034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -4385,6 +4486,9 @@ /* [R 32] Parity register #0 read */ #define USEM_REG_USEM_PRTY_STS_0 0x300124 #define USEM_REG_USEM_PRTY_STS_1 0x300134 +/* [RC 32] Parity register #0 read clear */ +#define USEM_REG_USEM_PRTY_STS_CLR_0 0x300128 +#define USEM_REG_USEM_PRTY_STS_CLR_1 0x300138 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ #define USEM_REG_VFPF_ERR_NUM 0x300380 @@ -4761,6 +4865,8 @@ #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc /* [R 11] Parity register #0 read */ #define XSDM_REG_XSDM_PRTY_STS 0x1662b0 +/* [RC 11] Parity register #0 read clear */ +#define XSDM_REG_XSDM_PRTY_STS_CLR 0x1662b4 /* [RW 5] The number of time_slots in the arbitration cycle */ #define XSEM_REG_ARB_CYCLE_SIZE 0x280034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -4893,6 +4999,9 @@ /* [R 32] Parity register #0 read */ #define XSEM_REG_XSEM_PRTY_STS_0 0x280124 #define XSEM_REG_XSEM_PRTY_STS_1 0x280134 +/* [RC 32] Parity register #0 read clear */ +#define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128 +#define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138 #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) @@ -4970,7 +5079,23 @@ #define EMAC_REG_EMAC_TX_MODE 0xbc #define EMAC_REG_EMAC_TX_STAT_AC 0x280 #define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22 +#define EMAC_REG_RX_PFC_MODE 0x320 +#define EMAC_REG_RX_PFC_MODE_PRIORITIES (1L<<2) +#define EMAC_REG_RX_PFC_MODE_RX_EN (1L<<1) +#define EMAC_REG_RX_PFC_MODE_TX_EN (1L<<0) +#define EMAC_REG_RX_PFC_PARAM 0x324 +#define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT 0 +#define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT 16 +#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD 0x328 +#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XOFF_SENT 0x330 +#define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XON_RCVD 0x32c +#define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XON_SENT 0x334 +#define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT (0xffff<<0) #define EMAC_RX_MODE_FLOW_EN (1L<<2) +#define EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3) #define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) #define EMAC_RX_MODE_PROMISCUOUS (1L<<8) #define EMAC_RX_MODE_RESET (1L<<0) @@ -6264,3 +6389,4 @@ static inline u8 calc_crc8(u32 data, u8 crc) } +#endif /* BNX2X_REG_H */ |