diff options
Diffstat (limited to 'drivers/net/bnx2x_hsi.h')
| -rw-r--r-- | drivers/net/bnx2x_hsi.h | 428 |
1 files changed, 231 insertions, 197 deletions
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 6fd959c34d1..b21075ccb52 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -1,6 +1,6 @@ /* bnx2x_hsi.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -8,169 +8,9 @@ */ -#define FUNC_0 0 -#define FUNC_1 1 -#define FUNC_MAX 2 - - -/* This value (in milliseconds) determines the frequency of the driver - * issuing the PULSE message code. The firmware monitors this periodic - * pulse to determine when to switch to an OS-absent mode. */ -#define DRV_PULSE_PERIOD_MS 250 - -/* This value (in milliseconds) determines how long the driver should - * wait for an acknowledgement from the firmware before timing out. Once - * the firmware has timed out, the driver will assume there is no firmware - * running and there won't be any firmware-driver synchronization during a - * driver reset. */ -#define FW_ACK_TIME_OUT_MS 5000 - -#define FW_ACK_POLL_TIME_MS 1 - -#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) - -/* LED Blink rate that will achieve ~15.9Hz */ -#define LED_BLINK_RATE_VAL 480 - -/**************************************************************************** - * Driver <-> FW Mailbox * - ****************************************************************************/ -struct drv_fw_mb { - u32 drv_mb_header; -#define DRV_MSG_CODE_MASK 0xffff0000 -#define DRV_MSG_CODE_LOAD_REQ 0x10000000 -#define DRV_MSG_CODE_LOAD_DONE 0x11000000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 -#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 -#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 -#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 -#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 -#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 -#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 -#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 -#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 - -#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff - - u32 drv_mb_param; - - u32 fw_mb_header; -#define FW_MSG_CODE_MASK 0xffff0000 -#define FW_MSG_CODE_DRV_LOAD_COMMON 0x11000000 -#define FW_MSG_CODE_DRV_LOAD_PORT 0x12000000 -#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x13000000 -#define FW_MSG_CODE_DRV_LOAD_DONE 0x14000000 -#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x21000000 -#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x22000000 -#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x23000000 -#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50000000 -#define FW_MSG_CODE_DIAG_REFUSE 0x51000000 -#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70000000 -#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x71000000 -#define FW_MSG_CODE_GET_KEY_DONE 0x80000000 -#define FW_MSG_CODE_NO_KEY 0x8f000000 -#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x8f800000 -#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90000000 -#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x91000000 -#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x92000000 -#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x93000000 -#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x94000000 - -#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff - - u32 fw_mb_param; - - u32 link_status; - /* Driver should update this field on any link change event */ - -#define LINK_STATUS_LINK_FLAG_MASK 0x00000001 -#define LINK_STATUS_LINK_UP 0x00000001 -#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E -#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1) - -#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 -#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 - -#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 -#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 -#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 - -#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 -#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 -#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 -#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 -#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 -#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 -#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 - -#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 -#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 - -#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 -#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 - -#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 -#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) -#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) -#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) -#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) - -#define LINK_STATUS_SERDES_LINK 0x00100000 - -#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 -#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 -#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 -#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000 -#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000 -#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000 -#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000 -#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000 - - u32 drv_pulse_mb; -#define DRV_PULSE_SEQ_MASK 0x00007fff -#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 - /* The system time is in the format of - * (year-2001)*12*32 + month*32 + day. */ -#define DRV_PULSE_ALWAYS_ALIVE 0x00008000 - /* Indicate to the firmware not to go into the - * OS-absent when it is not getting driver pulse. - * This is used for debugging as well for PXE(MBA). */ - - u32 mcp_pulse_mb; -#define MCP_PULSE_SEQ_MASK 0x00007fff -#define MCP_PULSE_ALWAYS_ALIVE 0x00008000 - /* Indicates to the driver not to assert due to lack - * of MCP response */ -#define MCP_EVENT_MASK 0xffff0000 -#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 - -}; - +#define PORT_0 0 +#define PORT_1 1 +#define PORT_MAX 2 /**************************************************************************** * Shared HW configuration * @@ -249,7 +89,7 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_SMBUS_TIMING_100KHZ 0x00000000 #define SHARED_HW_CFG_SMBUS_TIMING_400KHZ 0x00001000 -#define SHARED_HW_CFG_HIDE_FUNC1 0x00002000 +#define SHARED_HW_CFG_HIDE_PORT1 0x00002000 u32 power_dissipated; /* 0x11c */ #define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000 @@ -290,6 +130,8 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G 0x00000006 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G 0x00000007 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G 0x00000008 +#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G 0x00000009 +#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G 0x0000000a #define SHARED_HW_CFG_BOARD_VER_MASK 0xffff0000 #define SHARED_HW_CFG_BOARD_VER_SHIFT 16 @@ -304,13 +146,12 @@ struct shared_hw_cfg { /* NVRAM Offset */ }; + /**************************************************************************** * Port HW configuration * ****************************************************************************/ -struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ +struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ - /* Fields below are port specific (in anticipation of dual port - devices */ u32 pci_id; #define PORT_HW_CFG_PCI_VENDOR_ID_MASK 0xffff0000 #define PORT_HW_CFG_PCI_DEVICE_ID_MASK 0x0000ffff @@ -420,6 +261,8 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706 0x00000500 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276 0x00000600 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 #define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK 0x000000ff @@ -462,11 +305,13 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ }; + /**************************************************************************** * Shared Feature configuration * ****************************************************************************/ struct shared_feat_cfg { /* NVRAM Offset */ - u32 bmc_common; /* 0x450 */ + + u32 config; /* 0x450 */ #define SHARED_FEATURE_BMC_ECHO_MODE_EN 0x00000001 }; @@ -475,7 +320,8 @@ struct shared_feat_cfg { /* NVRAM Offset */ /**************************************************************************** * Port Feature configuration * ****************************************************************************/ -struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ +struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ + u32 config; #define PORT_FEATURE_BAR1_SIZE_MASK 0x0000000f #define PORT_FEATURE_BAR1_SIZE_SHIFT 0 @@ -609,8 +455,7 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ #define PORT_FEATURE_SMBUS_ADDR_MASK 0x000000fe #define PORT_FEATURE_SMBUS_ADDR_SHIFT 1 - u32 iscsib_boot_cfg; -#define PORT_FEATURE_ISCSIB_SKIP_TARGET_BOOT 0x00000001 + u32 reserved1; u32 link_config; /* Used as HW defaults for the driver */ #define PORT_FEATURE_CONNECTED_SWITCH_MASK 0x03000000 @@ -657,20 +502,201 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ }; +/***************************************************************************** + * Device Information * + *****************************************************************************/ +struct dev_info { /* size */ + + u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + + struct shared_hw_cfg shared_hw_config; /* 40 */ + + struct port_hw_cfg port_hw_config[PORT_MAX]; /* 400*2=800 */ + + struct shared_feat_cfg shared_feature_config; /* 4 */ + + struct port_feat_cfg port_feature_config[PORT_MAX]; /* 116*2=232 */ + +}; + + +#define FUNC_0 0 +#define FUNC_1 1 +#define E1_FUNC_MAX 2 +#define FUNC_MAX E1_FUNC_MAX + + +/* This value (in milliseconds) determines the frequency of the driver + * issuing the PULSE message code. The firmware monitors this periodic + * pulse to determine when to switch to an OS-absent mode. */ +#define DRV_PULSE_PERIOD_MS 250 + +/* This value (in milliseconds) determines how long the driver should + * wait for an acknowledgement from the firmware before timing out. Once + * the firmware has timed out, the driver will assume there is no firmware + * running and there won't be any firmware-driver synchronization during a + * driver reset. */ +#define FW_ACK_TIME_OUT_MS 5000 + +#define FW_ACK_POLL_TIME_MS 1 + +#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) + +/* LED Blink rate that will achieve ~15.9Hz */ +#define LED_BLINK_RATE_VAL 480 + /**************************************************************************** - * Device Information * + * Driver <-> FW Mailbox * ****************************************************************************/ -struct dev_info { /* size */ +struct drv_port_mb { + + u32 link_status; + /* Driver should update this field on any link change event */ + +#define LINK_STATUS_LINK_FLAG_MASK 0x00000001 +#define LINK_STATUS_LINK_UP 0x00000001 +#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E +#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1) + +#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 +#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 + +#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 +#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 +#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 + +#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 +#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 +#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 +#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 +#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 +#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 +#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 + +#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 +#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 + +#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 +#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 + +#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 +#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) +#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) +#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) +#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) + +#define LINK_STATUS_SERDES_LINK 0x00100000 + +#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 +#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 +#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 +#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000 +#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000 +#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000 +#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000 +#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000 - u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + u32 reserved[3]; - struct shared_hw_cfg shared_hw_config; /* 40 */ +}; + + +struct drv_func_mb { + + u32 drv_mb_header; +#define DRV_MSG_CODE_MASK 0xffff0000 +#define DRV_MSG_CODE_LOAD_REQ 0x10000000 +#define DRV_MSG_CODE_LOAD_DONE 0x11000000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 +#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 +#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 +#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 +#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 +#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 +#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 +#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 +#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 + +#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 drv_mb_param; + + u32 fw_mb_header; +#define FW_MSG_CODE_MASK 0xffff0000 +#define FW_MSG_CODE_DRV_LOAD_COMMON 0x10100000 +#define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000 +#define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000 +#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x10200000 +#define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000 +#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x20100000 +#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20110000 +#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20120000 +#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000 +#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50100000 +#define FW_MSG_CODE_DIAG_REFUSE 0x50200000 +#define FW_MSG_CODE_DIAG_EXIT_DONE 0x60100000 +#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70100000 +#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x70200000 +#define FW_MSG_CODE_GET_KEY_DONE 0x80100000 +#define FW_MSG_CODE_NO_KEY 0x80f00000 +#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x80f80000 +#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90100000 +#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x90210000 +#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000 +#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000 +#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000 + +#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 fw_mb_param; + + u32 drv_pulse_mb; +#define DRV_PULSE_SEQ_MASK 0x00007fff +#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 + /* The system time is in the format of + * (year-2001)*12*32 + month*32 + day. */ +#define DRV_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicate to the firmware not to go into the + * OS-absent when it is not getting driver pulse. + * This is used for debugging as well for PXE(MBA). */ - struct port_hw_cfg port_hw_config[FUNC_MAX]; /* 400*2=800 */ + u32 mcp_pulse_mb; +#define MCP_PULSE_SEQ_MASK 0x00007fff +#define MCP_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicates to the driver not to assert due to lack + * of MCP response */ +#define MCP_EVENT_MASK 0xffff0000 +#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 - struct shared_feat_cfg shared_feature_config; /* 4 */ + u32 iscsi_boot_signature; + u32 iscsi_boot_block_offset; - struct port_feat_cfg port_feature_config[FUNC_MAX];/* 116*2=232 */ + u32 reserved[3]; }; @@ -678,9 +704,8 @@ struct dev_info { /* size */ /**************************************************************************** * Management firmware state * ****************************************************************************/ -/* Allocate 320 bytes for management firmware: still not known exactly - * how much IMD needs. */ -#define MGMTFW_STATE_WORD_SIZE 80 +/* Allocate 440 bytes for management firmware */ +#define MGMTFW_STATE_WORD_SIZE 110 struct mgmtfw_state { u32 opaque[MGMTFW_STATE_WORD_SIZE]; @@ -691,31 +716,40 @@ struct mgmtfw_state { * Shared Memory Region * ****************************************************************************/ struct shmem_region { /* SharedMem Offset (size) */ - u32 validity_map[FUNC_MAX]; /* 0x0 (4 * 2 = 0x8) */ -#define SHR_MEM_VALIDITY_PCI_CFG 0x00000001 -#define SHR_MEM_VALIDITY_MB 0x00000002 -#define SHR_MEM_VALIDITY_DEV_INFO 0x00000004 + + u32 validity_map[PORT_MAX]; /* 0x0 (4*2 = 0x8) */ +#define SHR_MEM_FORMAT_REV_ID ('A'<<24) +#define SHR_MEM_FORMAT_REV_MASK 0xff000000 + /* validity bits */ +#define SHR_MEM_VALIDITY_PCI_CFG 0x00100000 +#define SHR_MEM_VALIDITY_MB 0x00200000 +#define SHR_MEM_VALIDITY_DEV_INFO 0x00400000 +#define SHR_MEM_VALIDITY_RESERVED 0x00000007 /* One licensing bit should be set */ #define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038 #define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008 #define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010 #define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020 + /* Active MFW */ +#define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI 0x00000040 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP 0x00000080 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI 0x000000c0 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE 0x000001c0 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK 0x000001c0 - struct drv_fw_mb drv_fw_mb[FUNC_MAX]; /* 0x8 (28 * 2 = 0x38) */ - - struct dev_info dev_info; /* 0x40 (0x438) */ + struct dev_info dev_info; /* 0x8 (0x438) */ -#ifdef _LICENSE_H - license_key_t drv_lic_key[FUNC_MAX]; /* 0x478 (52 * 2 = 0x68) */ -#else /* Linux! */ - u8 reserved[52*FUNC_MAX]; -#endif + u8 reserved[52*PORT_MAX]; /* FW information (for internal FW use) */ - u32 fw_info_fio_offset; /* 0x4e0 (0x4) */ - struct mgmtfw_state mgmtfw_state; /* 0x4e4 (0x140) */ + u32 fw_info_fio_offset; /* 0x4a8 (0x4) */ + struct mgmtfw_state mgmtfw_state; /* 0x4ac (0x1b8) */ + + struct drv_port_mb port_mb[PORT_MAX]; /* 0x664 (16*2=0x20) */ + struct drv_func_mb func_mb[FUNC_MAX]; /* 0x684 (44*2=0x58) */ -}; /* 0x624 */ +}; /* 0x6dc */ #define BCM_5710_FW_MAJOR_VERSION 4 |