diff options
Diffstat (limited to 'drivers/net/bnx2x_init.h')
| -rw-r--r-- | drivers/net/bnx2x_init.h | 605 |
1 files changed, 69 insertions, 536 deletions
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 39ba2936c0c..3ba4d888068 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -1,4 +1,5 @@ /* bnx2x_init.h: Broadcom Everest network driver. + * Structures and macroes needed during the initialization. * * Copyright (c) 2007-2009 Broadcom Corporation * @@ -8,6 +9,7 @@ * * Maintained by: Eilon Greenstein <eilong@broadcom.com> * Written by: Eliezer Tamir + * Modified by: Vladislav Zolotarov <vladz@broadcom.com> */ #ifndef BNX2X_INIT_H @@ -45,33 +47,71 @@ #define OP_WR_64 0x8 /* write 64 bit pattern */ #define OP_WB 0x9 /* copy a string using DMAE */ -/* Operation specific for E1 */ -#define OP_RD_E1 0xa /* read single register */ -#define OP_WR_E1 0xb /* write single register */ -#define OP_IW_E1 0xc /* write single register using mailbox */ -#define OP_SW_E1 0xd /* copy a string to the device */ -#define OP_SI_E1 0xe /* copy a string using mailbox */ -#define OP_ZR_E1 0xf /* clear memory */ -#define OP_ZP_E1 0x10 /* unzip then copy with DMAE */ -#define OP_WR_64_E1 0x11 /* write 64 bit pattern on E1 */ -#define OP_WB_E1 0x12 /* copy a string using DMAE */ - -/* Operation specific for E1H */ -#define OP_RD_E1H 0x13 /* read single register */ -#define OP_WR_E1H 0x14 /* write single register */ -#define OP_IW_E1H 0x15 /* write single register using mailbox */ -#define OP_SW_E1H 0x16 /* copy a string to the device */ -#define OP_SI_E1H 0x17 /* copy a string using mailbox */ -#define OP_ZR_E1H 0x18 /* clear memory */ -#define OP_ZP_E1H 0x19 /* unzip then copy with DMAE */ -#define OP_WR_64_E1H 0x1a /* write 64 bit pattern on E1H */ -#define OP_WB_E1H 0x1b /* copy a string using DMAE */ - /* FPGA and EMUL specific operations */ -#define OP_WR_EMUL_E1H 0x1c /* write single register on E1H Emul */ -#define OP_WR_EMUL 0x1d /* write single register on Emulation */ -#define OP_WR_FPGA 0x1e /* write single register on FPGA */ -#define OP_WR_ASIC 0x1f /* write single register on ASIC */ +#define OP_WR_EMUL 0xa /* write single register on Emulation */ +#define OP_WR_FPGA 0xb /* write single register on FPGA */ +#define OP_WR_ASIC 0xc /* write single register on ASIC */ + +/* Init stages */ +#define COMMON_STAGE 0 +#define PORT0_STAGE 1 +#define PORT1_STAGE 2 +/* Never reorder FUNCx stages !!! */ +#define FUNC0_STAGE 3 +#define FUNC1_STAGE 4 +#define FUNC2_STAGE 5 +#define FUNC3_STAGE 6 +#define FUNC4_STAGE 7 +#define FUNC5_STAGE 8 +#define FUNC6_STAGE 9 +#define FUNC7_STAGE 10 +#define STAGE_IDX_MAX 11 + +#define STAGE_START 0 +#define STAGE_END 1 + + +/* Indices of blocks */ +#define PRS_BLOCK 0 +#define SRCH_BLOCK 1 +#define TSDM_BLOCK 2 +#define TCM_BLOCK 3 +#define BRB1_BLOCK 4 +#define TSEM_BLOCK 5 +#define PXPCS_BLOCK 6 +#define EMAC0_BLOCK 7 +#define EMAC1_BLOCK 8 +#define DBU_BLOCK 9 +#define MISC_BLOCK 10 +#define DBG_BLOCK 11 +#define NIG_BLOCK 12 +#define MCP_BLOCK 13 +#define UPB_BLOCK 14 +#define CSDM_BLOCK 15 +#define USDM_BLOCK 16 +#define CCM_BLOCK 17 +#define UCM_BLOCK 18 +#define USEM_BLOCK 19 +#define CSEM_BLOCK 20 +#define XPB_BLOCK 21 +#define DQ_BLOCK 22 +#define TIMERS_BLOCK 23 +#define XSDM_BLOCK 24 +#define QM_BLOCK 25 +#define PBF_BLOCK 26 +#define XCM_BLOCK 27 +#define XSEM_BLOCK 28 +#define CDU_BLOCK 29 +#define DMAE_BLOCK 30 +#define PXP_BLOCK 31 +#define CFC_BLOCK 32 +#define HC_BLOCK 33 +#define PXP2_BLOCK 34 +#define MISC_AEU_BLOCK 35 + +/* Returns the index of start or end of a specific block stage in ops array*/ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end)) struct raw_op { @@ -118,292 +158,6 @@ union init_op { struct raw_op raw; }; -#include "bnx2x_init_values.h" - -static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val); -static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len); - -static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data, - u32 len) -{ - int i; - - for (i = 0; i < len; i++) { - REG_WR(bp, addr + i*4, data[i]); - if (!(i % 10000)) { - touch_softlockup_watchdog(); - cpu_relax(); - } - } -} - -static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data, - u16 len) -{ - int i; - - for (i = 0; i < len; i++) { - REG_WR_IND(bp, addr + i*4, data[i]); - if (!(i % 10000)) { - touch_softlockup_watchdog(); - cpu_relax(); - } - } -} - -static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len) -{ - int offset = 0; - - if (bp->dmae_ready) { - while (len > DMAE_LEN32_WR_MAX) { - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, DMAE_LEN32_WR_MAX); - offset += DMAE_LEN32_WR_MAX * 4; - len -= DMAE_LEN32_WR_MAX; - } - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, len); - } else - bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len); -} - -static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) -{ - u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4)); - u32 buf_len32 = buf_len / 4; - int i; - - memset(bp->gunzip_buf, fill, buf_len); - - for (i = 0; i < len; i += buf_len32) { - u32 cur_len = min(buf_len32, len - i); - - bnx2x_write_big_buf(bp, addr + i * 4, cur_len); - } -} - -static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data, - u32 len64) -{ - u32 buf_len32 = FW_BUF_SIZE / 4; - u32 len = len64 * 2; - u64 data64 = 0; - int i; - - /* 64 bit value is in a blob: first low DWORD, then high DWORD */ - data64 = HILO_U64((*(data + 1)), (*data)); - len64 = min((u32)(FW_BUF_SIZE/8), len64); - for (i = 0; i < len64; i++) { - u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i; - - *pdata = data64; - } - - for (i = 0; i < len; i += buf_len32) { - u32 cur_len = min(buf_len32, len - i); - - bnx2x_write_big_buf(bp, addr + i * 4, cur_len); - } -} - -/********************************************************* - There are different blobs for each PRAM section. - In addition, each blob write operation is divided into a few operations - in order to decrease the amount of phys. contiguous buffer needed. - Thus, when we select a blob the address may be with some offset - from the beginning of PRAM section. - The same holds for the INT_TABLE sections. -**********************************************************/ -#define IF_IS_INT_TABLE_ADDR(base, addr) \ - if (((base) <= (addr)) && ((base) + 0x400 >= (addr))) - -#define IF_IS_PRAM_ADDR(base, addr) \ - if (((base) <= (addr)) && ((base) + 0x40000 >= (addr))) - -static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1) -{ - IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr) - data = is_e1 ? tsem_int_table_data_e1 : - tsem_int_table_data_e1h; - else - IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr) - data = is_e1 ? csem_int_table_data_e1 : - csem_int_table_data_e1h; - else - IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr) - data = is_e1 ? usem_int_table_data_e1 : - usem_int_table_data_e1h; - else - IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr) - data = is_e1 ? xsem_int_table_data_e1 : - xsem_int_table_data_e1h; - else - IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr) - data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h; - else - IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr) - data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h; - else - IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr) - data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h; - else - IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr) - data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h; - - return data; -} - -static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data, - u32 len, int gunzip, int is_e1, u32 blob_off) -{ - int offset = 0; - - data = bnx2x_sel_blob(addr, data, is_e1) + blob_off; - - if (gunzip) { - int rc; -#ifdef __BIG_ENDIAN - int i, size; - u32 *temp; - - temp = kmalloc(len, GFP_KERNEL); - size = (len / 4) + ((len % 4) ? 1 : 0); - for (i = 0; i < size; i++) - temp[i] = swab32(data[i]); - data = temp; -#endif - rc = bnx2x_gunzip(bp, (u8 *)data, len); - if (rc) { - BNX2X_ERR("gunzip failed ! rc %d\n", rc); -#ifdef __BIG_ENDIAN - kfree(temp); -#endif - return; - } - len = bp->gunzip_outlen; -#ifdef __BIG_ENDIAN - kfree(temp); - for (i = 0; i < len; i++) - ((u32 *)bp->gunzip_buf)[i] = - swab32(((u32 *)bp->gunzip_buf)[i]); -#endif - } else { - if ((len * 4) > FW_BUF_SIZE) { - BNX2X_ERR("LARGE DMAE OPERATION ! " - "addr 0x%x len 0x%x\n", addr, len*4); - return; - } - memcpy(bp->gunzip_buf, data, len * 4); - } - - if (bp->dmae_ready) { - while (len > DMAE_LEN32_WR_MAX) { - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, DMAE_LEN32_WR_MAX); - offset += DMAE_LEN32_WR_MAX * 4; - len -= DMAE_LEN32_WR_MAX; - } - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, len); - } else - bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len); -} - -static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) -{ - int is_e1 = CHIP_IS_E1(bp); - int is_e1h = CHIP_IS_E1H(bp); - int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h); - int hw_wr, i; - union init_op *op; - u32 op_type, addr, len; - const u32 *data, *data_base; - - if (CHIP_REV_IS_FPGA(bp)) - hw_wr = OP_WR_FPGA; - else if (CHIP_REV_IS_EMUL(bp)) - hw_wr = OP_WR_EMUL; - else - hw_wr = OP_WR_ASIC; - - if (is_e1) - data_base = init_data_e1; - else /* CHIP_IS_E1H(bp) */ - data_base = init_data_e1h; - - for (i = op_start; i < op_end; i++) { - - op = (union init_op *)&(init_ops[i]); - - op_type = op->str_wr.op; - addr = op->str_wr.offset; - len = op->str_wr.data_len; - data = data_base + op->str_wr.data_off; - - /* careful! it must be in order */ - if (unlikely(op_type > OP_WB)) { - - /* If E1 only */ - if (op_type <= OP_WB_E1) { - if (is_e1) - op_type -= (OP_RD_E1 - OP_RD); - - /* If E1H only */ - } else if (op_type <= OP_WB_E1H) { - if (is_e1h) - op_type -= (OP_RD_E1H - OP_RD); - } - - /* HW/EMUL specific */ - if (op_type == hw_wr) - op_type = OP_WR; - - /* EMUL on E1H is special */ - if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h) - op_type = OP_WR; - } - - switch (op_type) { - case OP_RD: - REG_RD(bp, addr); - break; - case OP_WR: - REG_WR(bp, addr, op->write.val); - break; - case OP_SW: - bnx2x_init_str_wr(bp, addr, data, len); - break; - case OP_WB: - bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0); - break; - case OP_SI: - bnx2x_init_ind_wr(bp, addr, data, len); - break; - case OP_ZR: - bnx2x_init_fill(bp, addr, 0, op->zero.len); - break; - case OP_ZP: - bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1, - op->str_wr.data_off); - break; - case OP_WR_64: - bnx2x_init_wr_64(bp, addr, data, len); - break; - default: - /* happens whenever an op is of a diff HW */ -#if 0 - DP(NETIF_MSG_HW, "skipping init operation " - "index %d[%d:%d]: type %d addr 0x%x " - "len %d(0x%x)\n", - i, op_start, op_end, op_type, addr, len, len); -#endif - break; - } - } -} - - /**************************************************************************** * PXP ****************************************************************************/ @@ -567,111 +321,6 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = { PXP2_REG_RQ_BW_WR_UBOUND30} }; -static void bnx2x_init_pxp(struct bnx2x *bp) -{ - u16 devctl; - int r_order, w_order; - u32 val, i; - - pci_read_config_word(bp->pdev, - bp->pcie_cap + PCI_EXP_DEVCTL, &devctl); - DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); - w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); - if (bp->mrrs == -1) - r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); - else { - DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); - r_order = bp->mrrs; - } - - if (r_order > MAX_RD_ORD) { - DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n", - r_order, MAX_RD_ORD); - r_order = MAX_RD_ORD; - } - if (w_order > MAX_WR_ORD) { - DP(NETIF_MSG_HW, "write order of %d order adjusted to %d\n", - w_order, MAX_WR_ORD); - w_order = MAX_WR_ORD; - } - if (CHIP_REV_IS_FPGA(bp)) { - DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n"); - w_order = 0; - } - DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order); - - for (i = 0; i < NUM_RD_Q-1; i++) { - REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l); - REG_WR(bp, read_arb_addr[i].add, - read_arb_data[i][r_order].add); - REG_WR(bp, read_arb_addr[i].ubound, - read_arb_data[i][r_order].ubound); - } - - for (i = 0; i < NUM_WR_Q-1; i++) { - if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) || - (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) { - - REG_WR(bp, write_arb_addr[i].l, - write_arb_data[i][w_order].l); - - REG_WR(bp, write_arb_addr[i].add, - write_arb_data[i][w_order].add); - - REG_WR(bp, write_arb_addr[i].ubound, - write_arb_data[i][w_order].ubound); - } else { - - val = REG_RD(bp, write_arb_addr[i].l); - REG_WR(bp, write_arb_addr[i].l, - val | (write_arb_data[i][w_order].l << 10)); - - val = REG_RD(bp, write_arb_addr[i].add); - REG_WR(bp, write_arb_addr[i].add, - val | (write_arb_data[i][w_order].add << 10)); - - val = REG_RD(bp, write_arb_addr[i].ubound); - REG_WR(bp, write_arb_addr[i].ubound, - val | (write_arb_data[i][w_order].ubound << 7)); - } - } - - val = write_arb_data[NUM_WR_Q-1][w_order].add; - val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10; - val += write_arb_data[NUM_WR_Q-1][w_order].l << 17; - REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val); - - val = read_arb_data[NUM_RD_Q-1][r_order].add; - val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10; - val += read_arb_data[NUM_RD_Q-1][r_order].l << 17; - REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val); - - REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order); - REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order); - REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order); - REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order); - - if (r_order == MAX_RD_ORD) - REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); - - REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); - - if (CHIP_IS_E1H(bp)) { - val = ((w_order == 0) ? 2 : 3); - REG_WR(bp, PXP2_REG_WR_HC_MPS, val); - REG_WR(bp, PXP2_REG_WR_USDM_MPS, val); - REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val); - REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val); - REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val); - REG_WR(bp, PXP2_REG_WR_QM_MPS, val); - REG_WR(bp, PXP2_REG_WR_TM_MPS, val); - REG_WR(bp, PXP2_REG_WR_SRC_MPS, val); - REG_WR(bp, PXP2_REG_WR_DBG_MPS, val); - REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */ - REG_WR(bp, PXP2_REG_WR_CDU_MPS, val); - } -} - /**************************************************************************** * CDU @@ -695,128 +344,12 @@ static void bnx2x_init_pxp(struct bnx2x *bp) (0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7)) #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80) -/***************************************************************************** - * Description: - * Calculates crc 8 on a word value: polynomial 0-1-2-8 - * Code was translated from Verilog. - ****************************************************************************/ -static u8 calc_crc8(u32 data, u8 crc) -{ - u8 D[32]; - u8 NewCRC[8]; - u8 C[8]; - u8 crc_res; - u8 i; - - /* split the data into 31 bits */ - for (i = 0; i < 32; i++) { - D[i] = data & 1; - data = data >> 1; - } - - /* split the crc into 8 bits */ - for (i = 0; i < 8; i++) { - C[i] = crc & 1; - crc = crc >> 1; - } - - NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^ - D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^ - C[6] ^ C[7]; - NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^ - D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^ - D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6]; - NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^ - D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^ - C[0] ^ C[1] ^ C[4] ^ C[5]; - NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^ - D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^ - C[1] ^ C[2] ^ C[5] ^ C[6]; - NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^ - D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^ - C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7]; - NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^ - D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^ - C[3] ^ C[4] ^ C[7]; - NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^ - D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^ - C[5]; - NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^ - D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^ - C[6]; - - crc_res = 0; - for (i = 0; i < 8; i++) - crc_res |= (NewCRC[i] << i); - - return crc_res; -} /* registers addresses are not in order so these arrays help simplify the code */ -static const int cm_start[E1H_FUNC_MAX][9] = { - {MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START, - XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START, - XSEM_FUNC0_START}, - {MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START, - XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START, - XSEM_FUNC1_START}, - {MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START, - XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START, - XSEM_FUNC2_START}, - {MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START, - XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START, - XSEM_FUNC3_START}, - {MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START, - XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START, - XSEM_FUNC4_START}, - {MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START, - XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START, - XSEM_FUNC5_START}, - {MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START, - XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START, - XSEM_FUNC6_START}, - {MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START, - XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START, - XSEM_FUNC7_START} -}; - -static const int cm_end[E1H_FUNC_MAX][9] = { - {MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END, - XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END, - XSEM_FUNC0_END}, - {MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END, - XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END, - XSEM_FUNC1_END}, - {MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END, - XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END, - XSEM_FUNC2_END}, - {MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END, - XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END, - XSEM_FUNC3_END}, - {MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END, - XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END, - XSEM_FUNC4_END}, - {MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END, - XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END, - XSEM_FUNC5_END}, - {MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END, - XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END, - XSEM_FUNC6_END}, - {MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END, - XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END, - XSEM_FUNC7_END}, -}; - -static const int hc_limits[E1H_FUNC_MAX][2] = { - {HC_FUNC0_START, HC_FUNC0_END}, - {HC_FUNC1_START, HC_FUNC1_END}, - {HC_FUNC2_START, HC_FUNC2_END}, - {HC_FUNC3_START, HC_FUNC3_END}, - {HC_FUNC4_START, HC_FUNC4_END}, - {HC_FUNC5_START, HC_FUNC5_END}, - {HC_FUNC6_START, HC_FUNC6_END}, - {HC_FUNC7_START, HC_FUNC7_END} +static const int cm_blocks[9] = { + MISC_BLOCK, TCM_BLOCK, UCM_BLOCK, CCM_BLOCK, XCM_BLOCK, + TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK }; #endif /* BNX2X_INIT_H */ |