summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x_link.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x_link.c')
-rw-r--r--drivers/net/bnx2x_link.c30
1 files changed, 19 insertions, 11 deletions
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 73b52f17ea8..35f3b5a0572 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -2258,6 +2258,11 @@ static void bnx2x_bcm8726_external_rom_boot(struct link_params *params)
MDIO_PMA_REG_GEN_CTRL,
MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
+ bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_GEN_CTRL2,
+ 0x73A0);
+
/* Clear soft reset.
Will automatically reset micro-controller re-boot */
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
@@ -2265,8 +2270,8 @@ static void bnx2x_bcm8726_external_rom_boot(struct link_params *params)
MDIO_PMA_REG_GEN_CTRL,
MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
- /* wait for 100ms for microcode load */
- msleep(100);
+ /* wait for 150ms for microcode load */
+ msleep(150);
/* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
@@ -2524,7 +2529,7 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
u8 ext_phy_addr = ((params->ext_phy_config &
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
+ u16 cur_limiting_mode;
if (bnx2x_read_sfp_module_eeprom(params,
SFP_EEPROM_OPTIONS_ADDR,
SFP_EEPROM_OPTIONS_SIZE,
@@ -2535,6 +2540,16 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
}
limiting_mode = !(options[0] &
SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK);
+
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER2,
+ &cur_limiting_mode);
+ DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n",
+ cur_limiting_mode);
+
if (limiting_mode &&
(module_type != SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE)) {
DP(NETIF_MSG_LINK,
@@ -2547,17 +2562,10 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
MDIO_PMA_REG_ROM_VER2,
SFP_LIMITING_MODE_VALUE);
} else { /* LRM mode ( default )*/
- u16 cur_limiting_mode;
+
DP(NETIF_MSG_LINK, "Module options = 0x%x.Setting LRM MODE\n",
options[0]);
- bnx2x_cl45_read(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_ROM_VER2,
- &cur_limiting_mode);
-
/* Changing to LRM mode takes quite few seconds.
So do it only if current mode is limiting
( default is LRM )*/