diff options
Diffstat (limited to 'drivers/net/bnx2x_link.c')
-rw-r--r-- | drivers/net/bnx2x_link.c | 72 |
1 files changed, 36 insertions, 36 deletions
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 4ce7fe9c525..67de94f1f30 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -289,7 +289,7 @@ static u8 bnx2x_emac_enable(struct link_params *params, /* pause enable/disable */ bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE, EMAC_RX_MODE_FLOW_EN); - if (vars->flow_ctrl & FLOW_CTRL_RX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE, EMAC_RX_MODE_FLOW_EN); @@ -297,7 +297,7 @@ static u8 bnx2x_emac_enable(struct link_params *params, bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE, (EMAC_TX_MODE_EXT_PAUSE_EN | EMAC_TX_MODE_FLOW_EN)); - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE, (EMAC_TX_MODE_EXT_PAUSE_EN | @@ -333,7 +333,7 @@ static u8 bnx2x_emac_enable(struct link_params *params, /* enable the NIG in/out to the emac */ REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1); val = 0; - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) val = 1; REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val); @@ -396,7 +396,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, /* tx control */ val = 0xc0; - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) val |= 0x800000; wb_data[0] = val; wb_data[1] = 0; @@ -423,7 +423,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, /* rx control set to don't strip crc */ val = 0x14; - if (vars->flow_ctrl & FLOW_CTRL_RX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) val |= 0x20; wb_data[0] = val; wb_data[1] = 0; @@ -460,7 +460,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0); REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0); val = 0; - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) val = 1; REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val); REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0); @@ -580,14 +580,14 @@ void bnx2x_link_status_update(struct link_params *params, } if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= FLOW_CTRL_TX; + vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX; else - vars->flow_ctrl &= ~FLOW_CTRL_TX; + vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX; if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= FLOW_CTRL_RX; + vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX; else - vars->flow_ctrl &= ~FLOW_CTRL_RX; + vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX; if (vars->phy_flags & PHY_XGXS_FLAG) { if (vars->line_speed && @@ -618,7 +618,7 @@ void bnx2x_link_status_update(struct link_params *params, vars->line_speed = 0; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; /* indicate no mac active */ vars->mac_type = MAC_TYPE_NONE; @@ -691,7 +691,7 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, return -EINVAL; } - if (flow_ctrl & FLOW_CTRL_RX || + if (flow_ctrl & BNX2X_FLOW_CTRL_RX || line_speed == SPEED_10 || line_speed == SPEED_100 || line_speed == SPEED_1000 || @@ -1300,8 +1300,8 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc) * Please refer to Table 28B-3 of the 802.3ab-1999 spec */ switch (params->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - if (params->req_fc_auto_adv == FLOW_CTRL_BOTH) { + case BNX2X_FLOW_CTRL_AUTO: + if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) { *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; } else { @@ -1309,17 +1309,17 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc) MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; } break; - case FLOW_CTRL_TX: + case BNX2X_FLOW_CTRL_TX: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; break; - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: + case BNX2X_FLOW_CTRL_RX: + case BNX2X_FLOW_CTRL_BOTH: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; break; - case FLOW_CTRL_NONE: + case BNX2X_FLOW_CTRL_NONE: default: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; break; @@ -1463,18 +1463,18 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) { /* LD LP */ switch (pause_result) { /* ASYM P ASYM P */ case 0xb: /* 1 0 1 1 */ - vars->flow_ctrl = FLOW_CTRL_TX; + vars->flow_ctrl = BNX2X_FLOW_CTRL_TX; break; case 0xe: /* 1 1 1 0 */ - vars->flow_ctrl = FLOW_CTRL_RX; + vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; break; case 0x5: /* 0 1 0 1 */ case 0x7: /* 0 1 1 1 */ case 0xd: /* 1 1 0 1 */ case 0xf: /* 1 1 1 1 */ - vars->flow_ctrl = FLOW_CTRL_BOTH; + vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; break; default: @@ -1531,7 +1531,7 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params, DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n", pause_result); bnx2x_pause_resolve(vars, pause_result); - if (vars->flow_ctrl == FLOW_CTRL_NONE && + if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE && ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) { bnx2x_cl45_read(bp, port, ext_phy_type, @@ -1567,10 +1567,10 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params, u16 lp_pause; /* link partner */ u16 pause_result; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; /* resolve from gp_status in case of AN complete and not sgmii */ - if ((params->req_flow_ctrl == FLOW_CTRL_AUTO) && + if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && (!(vars->phy_flags & PHY_SGMII_FLAG)) && (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == @@ -1591,11 +1591,11 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params, MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result); bnx2x_pause_resolve(vars, pause_result); - } else if ((params->req_flow_ctrl == FLOW_CTRL_AUTO) && + } else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && (bnx2x_ext_phy_resove_fc(params, vars))) { return; } else { - if (params->req_flow_ctrl == FLOW_CTRL_AUTO) + if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) vars->flow_ctrl = params->req_fc_auto_adv; else vars->flow_ctrl = params->req_flow_ctrl; @@ -1728,11 +1728,11 @@ static u8 bnx2x_link_settings_status(struct link_params *params, LINK_STATUS_PARALLEL_DETECTION_USED; } - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) vars->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED; - if (vars->flow_ctrl & FLOW_CTRL_RX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) vars->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED; @@ -1742,7 +1742,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, vars->phy_link_up = 0; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->autoneg = AUTO_NEG_DISABLED; vars->mac_type = MAC_TYPE_NONE; } @@ -3924,7 +3924,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 0; vars->line_speed = 0; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_NONE; if (params->switch_cfg == SWITCH_CFG_1G) @@ -3946,12 +3946,12 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); /* enable on E1.5 FPGA */ if (CHIP_IS_E1H(bp)) { vars->flow_ctrl |= - (FLOW_CTRL_TX | FLOW_CTRL_RX); + (BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX); vars->link_status |= (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | LINK_STATUS_RX_FLOW_CONTROL_ENABLED); @@ -3974,7 +3974,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); bnx2x_bmac_enable(params, vars, 0); @@ -3994,7 +3994,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_BMAC; vars->phy_flags = PHY_XGXS_FLAG; @@ -4009,7 +4009,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_1000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_EMAC; vars->phy_flags = PHY_XGXS_FLAG; @@ -4026,7 +4026,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->phy_flags = PHY_XGXS_FLAG; |