diff options
Diffstat (limited to 'drivers/net/bnx2x_link.c')
| -rw-r--r-- | drivers/net/bnx2x_link.c | 44 |
1 files changed, 41 insertions, 3 deletions
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index b08ff77f1f9..7897fe13e61 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -2200,6 +2200,8 @@ static void bnx2x_ext_phy_reset(struct link_params *params, MDIO_PMA_REG_CTRL, 1<<15); break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: + break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: DP(NETIF_MSG_LINK, "XGXS PHY Failure detected\n"); break; @@ -4373,6 +4375,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) break; } case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: /* This phy uses the NIG latch mechanism since link indication arrives through its LED4 and not via its LASI signal, so we get steady signal @@ -4380,6 +4383,12 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, 1 << NIG_LATCH_BC_ENABLE_MI_INT); + bnx2x_cl45_write(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 0x0000); + bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr); if (params->req_line_speed == SPEED_AUTO_NEG) { @@ -5230,6 +5239,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, } break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: /* Check 10G-BaseT link status */ /* Check PMD signal ok */ bnx2x_cl45_read(bp, params->port, ext_phy_type, @@ -5445,8 +5455,10 @@ static void bnx2x_link_int_ack(struct link_params *params, (NIG_STATUS_XGXS0_LINK10G | NIG_STATUS_XGXS0_LINK_STATUS | NIG_STATUS_SERDES0_LINK_STATUS)); - if (XGXS_EXT_PHY_TYPE(params->ext_phy_config) - == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) { + if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) + == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) || + (XGXS_EXT_PHY_TYPE(params->ext_phy_config) + == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823)) { bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int); } if (vars->phy_link_up) { @@ -5559,6 +5571,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, status = bnx2x_format_ver(spirom_ver, version, len); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: spirom_ver = ((spirom_ver & 0xF80) >> 7) << 16 | (spirom_ver & 0x7F); status = bnx2x_format_ver(spirom_ver, version, len); @@ -6250,6 +6263,22 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, bnx2x_8726_reset_phy(bp, params->port, ext_phy_addr); break; } + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: + { + u8 ext_phy_addr = + XGXS_EXT_PHY_ADDR(params->ext_phy_config); + bnx2x_cl45_write(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_CTRL, 0x0000); + bnx2x_cl45_write(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 1); + break; + } default: /* HW reset */ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, @@ -6661,6 +6690,13 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) return 0; } + +static u8 bnx2x_84823_common_init_phy(struct bnx2x *bp, u32 shmem_base) +{ + /* HW reset */ + bnx2x_ext_phy_hw_reset(bp, 1); + return 0; +} u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) { u8 rc = 0; @@ -6690,7 +6726,9 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) /* GPIO1 affects both ports, so there's need to pull it for single port alone */ rc = bnx2x_8726_common_init_phy(bp, shmem_base); - + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: + rc = bnx2x_84823_common_init_phy(bp, shmem_base); break; default: DP(NETIF_MSG_LINK, |