diff options
Diffstat (limited to 'drivers/net/bnx2x_link.h')
| -rw-r--r-- | drivers/net/bnx2x_link.h | 63 |
1 files changed, 43 insertions, 20 deletions
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h index 19a866dc10e..f3e252264e1 100644 --- a/drivers/net/bnx2x_link.h +++ b/drivers/net/bnx2x_link.h @@ -39,7 +39,13 @@ #define SPEED_15000 15000 #define SPEED_16000 16000 - +#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14 +#define SFP_EEPROM_VENDOR_NAME_SIZE 16 +#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25 +#define SFP_EEPROM_VENDOR_OUI_SIZE 3 +#define SFP_EEPROM_PART_NO_ADDR 0x28 +#define SFP_EEPROM_PART_NO_SIZE 16 +#define PWR_FLT_ERR_MSG_LEN 250 /***********************************************************/ /* Structs */ /***********************************************************/ @@ -75,47 +81,59 @@ struct link_params { #define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT u16 hw_led_mode; /* part of the hw_config read from the shmem */ + + /* phy_addr populated by the phy_init function */ + u8 phy_addr; + /*u8 reserved1;*/ + u32 lane_config; u32 ext_phy_config; -#define XGXS_EXT_PHY_TYPE(ext_phy_config) (ext_phy_config & \ - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK) -#define SERDES_EXT_PHY_TYPE(ext_phy_config) (ext_phy_config & \ - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) +#define XGXS_EXT_PHY_TYPE(ext_phy_config) \ + ((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK) +#define XGXS_EXT_PHY_ADDR(ext_phy_config) \ + (((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \ + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT) +#define SERDES_EXT_PHY_TYPE(ext_phy_config) \ + ((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) + /* Phy register parameter */ u32 chip_id; - /* phy_addr populated by the CLC */ - u8 phy_addr; u16 xgxs_config_rx[4]; /* preemphasis values for the rx side */ - u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */ + u32 feature_config_flags; #define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0) -#define FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED (2<<0) +#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) +#define FEATURE_CONFIG_BCM8727_NOC (1<<3) + /* Device pointer passed to all callback functions */ struct bnx2x *bp; }; /* Output parameters */ struct link_vars { + u8 phy_flags; + + u8 mac_type; +#define MAC_TYPE_NONE 0 +#define MAC_TYPE_EMAC 1 +#define MAC_TYPE_BMAC 2 + u8 phy_link_up; /* internal phy link indication */ u8 link_up; + + u16 line_speed; u16 duplex; + u16 flow_ctrl; - u32 ieee_fc; - u8 mac_type; + u16 ieee_fc; -#define MAC_TYPE_NONE 0 -#define MAC_TYPE_EMAC 1 -#define MAC_TYPE_BMAC 2 - u16 line_speed; u32 autoneg; #define AUTO_NEG_DISABLED 0x0 #define AUTO_NEG_ENABLED 0x1 #define AUTO_NEG_COMPLETE 0x2 -#define AUTO_NEG_PARALLEL_DETECTION_USED 0x3 - - u8 phy_flags; +#define AUTO_NEG_PARALLEL_DETECTION_USED 0x3 /* The same definitions as the shmem parameter */ u32 link_status; @@ -167,8 +185,6 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed, u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, u32 led_idx, u32 value); -u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config, - u8 driver_loaded, char data[], u32 size); /* bnx2x_handle_module_detect_int should be called upon module detection interrupt */ void bnx2x_handle_module_detect_int(struct link_params *params); @@ -180,5 +196,12 @@ u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars); /* One-time initialization for external phy after power up */ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base); +/* Reset the external PHY using GPIO */ +void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); + +void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr); + +u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, + u8 byte_cnt, u8 *o_buf); #endif /* BNX2X_LINK_H */ |