diff options
Diffstat (limited to 'drivers/net/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/bnx2x_reg.h | 1939 |
1 files changed, 1475 insertions, 464 deletions
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 5a1aa0b5504..8707c0d05d9 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -72,6 +72,8 @@ #define CCM_REG_CCM_INT_MASK 0xd01e4 /* [R 11] Interrupt register #0 read */ #define CCM_REG_CCM_INT_STS 0xd01d8 +/* [R 27] Parity register #0 read */ +#define CCM_REG_CCM_PRTY_STS 0xd01e8 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -190,25 +192,20 @@ weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define CCM_REG_PBF_WEIGHT 0xd00ac -/* [RW 6] The physical queue number of queue number 1 per port index. */ #define CCM_REG_PHYS_QNUM1_0 0xd0134 #define CCM_REG_PHYS_QNUM1_1 0xd0138 -/* [RW 6] The physical queue number of queue number 2 per port index. */ #define CCM_REG_PHYS_QNUM2_0 0xd013c #define CCM_REG_PHYS_QNUM2_1 0xd0140 -/* [RW 6] The physical queue number of queue number 3 per port index. */ #define CCM_REG_PHYS_QNUM3_0 0xd0144 -/* [RW 6] The physical queue number of queue number 0 with QOS equal 0 port - index 0. */ +#define CCM_REG_PHYS_QNUM3_1 0xd0148 #define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114 #define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118 -/* [RW 6] The physical queue number of queue number 0 with QOS equal 1 port - index 0. */ #define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c #define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120 -/* [RW 6] The physical queue number of queue number 0 with QOS equal 2 port - index 0. */ #define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124 +#define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128 +#define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c +#define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -253,6 +250,7 @@ mechanism. The fields are: [5:0] - message length; [12:6] - message pointer; 18:13] - next pointer. */ #define CCM_REG_XX_DESCR_TABLE 0xd0300 +#define CCM_REG_XX_DESCR_TABLE_SIZE 36 /* [R 7] Used to read the value of XX protection Free counter. */ #define CCM_REG_XX_FREE 0xd0184 /* [RW 6] Initial value for the credit counter; responsible for fulfilling @@ -296,6 +294,8 @@ /* [WB 24] MATT ram access. each entry has the following format:{RegionLength[11:0]; egionOffset[11:0]} */ #define CDU_REG_MATT 0x101100 +/* [RW 1] when this bit is set the CDU operates in e1hmf mode */ +#define CDU_REG_MF_MODE 0x101050 /* [R 1] indication the initializing the activity counter by the hardware was done. */ #define CFC_REG_AC_INIT_DONE 0x104078 @@ -330,6 +330,9 @@ field allows changing the priorities of the weighted-round-robin arbiter which selects which CFC load client should be served next */ #define CFC_REG_LCREQ_WEIGHTS 0x104084 +/* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */ +#define CFC_REG_LINK_LIST 0x104c00 +#define CFC_REG_LINK_LIST_SIZE 256 /* [R 1] indication the initializing the link list by the hardware was done. */ #define CFC_REG_LL_INIT_DONE 0x104074 /* [R 9] Number of allocated LCIDs which are at empty state */ @@ -342,6 +345,45 @@ #define CFC_REG_NUM_LCIDS_LEAVING 0x104018 /* [RW 8] The event id for aggregated interrupt 0 */ #define CSDM_REG_AGG_INT_EVENT_0 0xc2038 +#define CSDM_REG_AGG_INT_EVENT_1 0xc203c +#define CSDM_REG_AGG_INT_EVENT_10 0xc2060 +#define CSDM_REG_AGG_INT_EVENT_11 0xc2064 +#define CSDM_REG_AGG_INT_EVENT_12 0xc2068 +#define CSDM_REG_AGG_INT_EVENT_13 0xc206c +#define CSDM_REG_AGG_INT_EVENT_14 0xc2070 +#define CSDM_REG_AGG_INT_EVENT_15 0xc2074 +#define CSDM_REG_AGG_INT_EVENT_16 0xc2078 +#define CSDM_REG_AGG_INT_EVENT_17 0xc207c +#define CSDM_REG_AGG_INT_EVENT_18 0xc2080 +#define CSDM_REG_AGG_INT_EVENT_19 0xc2084 +#define CSDM_REG_AGG_INT_EVENT_2 0xc2040 +#define CSDM_REG_AGG_INT_EVENT_20 0xc2088 +#define CSDM_REG_AGG_INT_EVENT_21 0xc208c +#define CSDM_REG_AGG_INT_EVENT_22 0xc2090 +#define CSDM_REG_AGG_INT_EVENT_23 0xc2094 +#define CSDM_REG_AGG_INT_EVENT_24 0xc2098 +#define CSDM_REG_AGG_INT_EVENT_25 0xc209c +#define CSDM_REG_AGG_INT_EVENT_26 0xc20a0 +#define CSDM_REG_AGG_INT_EVENT_27 0xc20a4 +#define CSDM_REG_AGG_INT_EVENT_28 0xc20a8 +#define CSDM_REG_AGG_INT_EVENT_29 0xc20ac +#define CSDM_REG_AGG_INT_EVENT_3 0xc2044 +#define CSDM_REG_AGG_INT_EVENT_30 0xc20b0 +#define CSDM_REG_AGG_INT_EVENT_31 0xc20b4 +#define CSDM_REG_AGG_INT_EVENT_4 0xc2048 +/* [RW 1] The T bit for aggregated interrupt 0 */ +#define CSDM_REG_AGG_INT_T_0 0xc20b8 +#define CSDM_REG_AGG_INT_T_1 0xc20bc +#define CSDM_REG_AGG_INT_T_10 0xc20e0 +#define CSDM_REG_AGG_INT_T_11 0xc20e4 +#define CSDM_REG_AGG_INT_T_12 0xc20e8 +#define CSDM_REG_AGG_INT_T_13 0xc20ec +#define CSDM_REG_AGG_INT_T_14 0xc20f0 +#define CSDM_REG_AGG_INT_T_15 0xc20f4 +#define CSDM_REG_AGG_INT_T_16 0xc20f8 +#define CSDM_REG_AGG_INT_T_17 0xc20fc +#define CSDM_REG_AGG_INT_T_18 0xc2100 +#define CSDM_REG_AGG_INT_T_19 0xc2104 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define CSDM_REG_CFC_RSP_START_ADDR 0xc2008 /* [RW 16] The maximum value of the competion counter #0 */ @@ -358,6 +400,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define CSDM_REG_CSDM_INT_MASK_0 0xc229c #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac +/* [R 32] Interrupt register #0 read */ +#define CSDM_REG_CSDM_INT_STS_0 0xc2290 +#define CSDM_REG_CSDM_INT_STS_1 0xc22a0 /* [RW 11] Parity mask register #0 read/write */ #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc /* [R 11] Parity register #0 read */ @@ -443,6 +488,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define CSEM_REG_CSEM_INT_MASK_0 0x200110 #define CSEM_REG_CSEM_INT_MASK_1 0x200120 +/* [R 32] Interrupt register #0 read */ +#define CSEM_REG_CSEM_INT_STS_0 0x200104 +#define CSEM_REG_CSEM_INT_STS_1 0x200114 /* [RW 32] Parity mask register #0 read/write */ #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 @@ -453,9 +501,8 @@ #define CSEM_REG_ENABLE_OUT 0x2000a8 /* [RW 32] This address space contains all registers and memories that are placed in SEM_FAST block. The SEM_FAST registers are described in - appendix B. In order to access the SEM_FAST registers the base address - CSEM_REGISTERS_FAST_MEMORY (Offset: 0x220000) should be added to each - SEM_FAST register offset. */ + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ #define CSEM_REG_FAST_MEMORY 0x220000 /* [RW 1] Disables input messages from FIC0 May be updated during run_time by the microcode */ @@ -466,6 +513,7 @@ /* [RW 15] Interrupt table Read and write access to it is not possible in the middle of the work */ #define CSEM_REG_INT_TABLE 0x200400 +#define CSEM_REG_INT_TABLE_SIZE 256 /* [ST 24] Statistics register. The number of messages that entered through FIC0 */ #define CSEM_REG_MSG_NUM_FIC0 0x200000 @@ -630,6 +678,8 @@ #define DORQ_REG_AGG_CMD3 0x17006c /* [RW 28] UCM Header. */ #define DORQ_REG_CMHEAD_RX 0x170050 +/* [RW 32] Doorbell address for RBC doorbells (function 0). */ +#define DORQ_REG_DB_ADDR0 0x17008c /* [RW 5] Interrupt mask register #0 read/write */ #define DORQ_REG_DORQ_INT_MASK 0x170180 /* [R 5] Interrupt register #0 read */ @@ -690,75 +740,33 @@ #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) #define HC_REG_AGG_INT_0 0x108050 #define HC_REG_AGG_INT_1 0x108054 -/* [RW 16] attention bit and attention acknowledge bits status for port 0 - and 1 according to the following address map: addr 0 - attn_bit_0; addr 1 - - attn_ack_bit_0; addr 2 - attn_bit_1; addr 3 - attn_ack_bit_1; */ #define HC_REG_ATTN_BIT 0x108120 -/* [RW 16] attn bits status index for attn bit msg; addr 0 - function 0; - addr 1 - functin 1 */ #define HC_REG_ATTN_IDX 0x108100 -/* [RW 32] port 0 lower 32 bits address field for attn messag. */ #define HC_REG_ATTN_MSG0_ADDR_L 0x108018 -/* [RW 32] port 1 lower 32 bits address field for attn messag. */ #define HC_REG_ATTN_MSG1_ADDR_L 0x108020 -/* [RW 8] status block number for attn bit msg - function 0; */ #define HC_REG_ATTN_NUM_P0 0x108038 -/* [RW 8] status block number for attn bit msg - function 1 */ #define HC_REG_ATTN_NUM_P1 0x10803c #define HC_REG_CONFIG_0 0x108000 #define HC_REG_CONFIG_1 0x108004 +#define HC_REG_FUNC_NUM_P0 0x1080ac +#define HC_REG_FUNC_NUM_P1 0x1080b0 /* [RW 3] Parity mask register #0 read/write */ #define HC_REG_HC_PRTY_MASK 0x1080a0 /* [R 3] Parity register #0 read */ #define HC_REG_HC_PRTY_STS 0x108094 -/* [RW 17] status block interrupt mask; one in each bit means unmask; zerow - in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1... - bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */ #define HC_REG_INT_MASK 0x108108 -/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will - lock a change fron 0 to 1 in the corresponding attention signals that - comes from the AEU */ #define HC_REG_LEADING_EDGE_0 0x108040 #define HC_REG_LEADING_EDGE_1 0x108048 -/* [RW 16] all producer and consumer of port 0 according to the following - addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63; - Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons: - U/C/X/T/Attn-69/70/71/72/73 */ #define HC_REG_P0_PROD_CONS 0x108200 -/* [RW 16] all producer and consumer of port 1according to the following - addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63; - Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons: - U/C/X/T/Attn-69/70/71/72/73 */ #define HC_REG_P1_PROD_CONS 0x108400 -/* [W 1] This register is write only and has 4 addresses as follow: 0 = - clear all PBA bits port 0; 1 = clear all pending interrupts request - port0; 2 = clear all PBA bits port 1; 3 = clear all pending interrupts - request port1; here is no meaning for the data in this register */ #define HC_REG_PBA_COMMAND 0x108140 #define HC_REG_PCI_CONFIG_0 0x108010 #define HC_REG_PCI_CONFIG_1 0x108014 -/* [RW 24] all counters acording to the following address: LSB: 0=read; 1= - read_clear; 0-71 = HW counters (the inside order is the same as the - interrupt table in the spec); 72-219 = SW counters 1 (stops after first - consumer upd) the inside order is: 72-103 - U_non_default_p0; 104-135 - C_non_defaul_p0; 36-145 U/C/X/T/Attn_default_p0; 146-177 - U_non_default_p1; 178-209 C_non_defaul_p1; 10-219 U/C/X/T/Attn_default_p1 - ; 220-367 = SW counters 2 (stops when prod=cons) the inside order is: - 220-251 - U_non_default_p0; 252-283 C_non_defaul_p0; 84-293 - U/C/X/T/Attn_default_p0; 294-325 U_non_default_p1; 326-357 - C_non_defaul_p1; 58-367 U/C/X/T/Attn_default_p1 ; 368-515 = mailbox - counters; (the inside order of the mailbox counter is 368-431 U and C - non_default_p0; 432-441 U/C/X/T/Attn_default_p0; 442-505 U and C - non_default_p1; 506-515 U/C/X/T/Attn_default_p1) */ #define HC_REG_STATISTIC_COUNTERS 0x109000 -/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will - lock a change fron 1 to 0 in the corresponding attention signals that - comes from the AEU */ #define HC_REG_TRAILING_EDGE_0 0x108044 #define HC_REG_TRAILING_EDGE_1 0x10804c #define HC_REG_UC_RAM_ADDR_0 0x108028 #define HC_REG_UC_RAM_ADDR_1 0x108030 -/* [RW 16] ustorm address for coalesc now message */ #define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068 #define HC_REG_VQID_0 0x108008 #define HC_REG_VQID_1 0x10800c @@ -883,14 +891,16 @@ rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458 -/* [W 11] write to this register results with the clear of the latched +/* [W 14] write to this register results with the clear of the latched signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP latch; one in d5 clears GRC Latched timeout attention; one in d6 clears GRC Latched reserved access attention; one in d7 clears Latched rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears - Latched ump_tx_parity; one in d10 clears Latched scpad_parity; read from - this register return zero */ + Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both + ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears + pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read + from this register return zero */ #define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c /* [RW 32] first 32b for enabling the output for function 0 output0. mapped as follows: [0] NIG attention for function0; [1] NIG attention for @@ -907,7 +917,11 @@ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc /* [RW 32] first 32b for enabling the output for function 1 output0. mapped as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function @@ -923,9 +937,13 @@ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c -/* [RW 32] first 32b for enabling the output for close the gate nig 0. - mapped as follows: [0] NIG attention for function0; [1] NIG attention for +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c +/* [RW 32] first 32b for enabling the output for close the gate nig. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event @@ -939,8 +957,8 @@ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ #define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec #define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c -/* [RW 32] first 32b for enabling the output for close the gate pxp 0. - mapped as follows: [0] NIG attention for function0; [1] NIG attention for +/* [RW 32] first 32b for enabling the output for close the gate pxp. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event @@ -984,34 +1002,34 @@ interrupt; */ #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120 -/* [RW 32] second 32b for enabling the output for close the gate nig 0. - mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; - [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] - Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] - XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] - XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw - interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI - core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity - error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw - interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI - Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw - interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM - Parity error; [31] CCM Hw interrupt; */ +/* [RW 32] second 32b for enabling the output for close the gate nig. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ #define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0 #define MISC_REG_AEU_ENABLE2_NIG_1 0xa190 -/* [RW 32] second 32b for enabling the output for close the gate pxp 0. - mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; - [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] - Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] - XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] - XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw - interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI - core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity - error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw - interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI - Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw - interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM - Parity error; [31] CCM Hw interrupt; */ +/* [RW 32] second 32b for enabling the output for close the gate pxp. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ #define MISC_REG_AEU_ENABLE2_PXP_0 0xa100 #define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0 /* [RW 32] third 32b for enabling the output for function 0 output0. mapped @@ -1044,34 +1062,34 @@ attn1; */ #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124 -/* [RW 32] third 32b for enabling the output for close the gate nig 0. - mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] - PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity - error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC - Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE - Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] - IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; - [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; - [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; - [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; - [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers - attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] - General attn1; */ +/* [RW 32] third 32b for enabling the output for close the gate nig. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ #define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4 #define MISC_REG_AEU_ENABLE3_NIG_1 0xa194 -/* [RW 32] third 32b for enabling the output for close the gate pxp 0. - mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] - PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity - error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC - Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE - Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] - IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; - [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; - [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; - [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; - [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers - attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] - General attn1; */ +/* [RW 32] third 32b for enabling the output for close the gate pxp. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ #define MISC_REG_AEU_ENABLE3_PXP_0 0xa104 #define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4 /* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped @@ -1088,6 +1106,10 @@ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8 /* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6] General attn8; @@ -1102,34 +1124,36 @@ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138 -/* [RW 32] fourth 32b for enabling the output for close the gate nig - 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General - attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6] - General attn8; [7] General attn9; [8] General attn10; [9] General attn11; - [10] General attn12; [11] General attn13; [12] General attn14; [13] - General attn15; [14] General attn16; [15] General attn17; [16] General - attn18; [17] General attn19; [18] General attn20; [19] General attn21; - [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched - attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched - attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved - access attention; [28] MCP Latched rom_parity; [29] MCP Latched - ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched - scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188 +/* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8 #define MISC_REG_AEU_ENABLE4_NIG_1 0xa198 -/* [RW 32] fourth 32b for enabling the output for close the gate pxp - 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General - attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6] - General attn8; [7] General attn9; [8] General attn10; [9] General attn11; - [10] General attn12; [11] General attn13; [12] General attn14; [13] - General attn15; [14] General attn16; [15] General attn17; [16] General - attn18; [17] General attn19; [18] General attn20; [19] General attn21; - [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched - attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched - attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved - access attention; [28] MCP Latched rom_parity; [29] MCP Latched - ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched - scpad_parity; */ +/* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_ENABLE4_PXP_0 0xa108 #define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu @@ -1148,6 +1172,7 @@ #define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c +#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030 #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 #define MISC_REG_AEU_GENERAL_ATTN_20 0xa050 #define MISC_REG_AEU_GENERAL_ATTN_21 0xa054 @@ -1158,6 +1183,7 @@ #define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c #define MISC_REG_AEU_GENERAL_ATTN_8 0xa020 #define MISC_REG_AEU_GENERAL_ATTN_9 0xa024 +#define MISC_REG_AEU_GENERAL_MASK 0xa61c /* [RW 32] first 32b for inverting the input for function 0; for each bit: 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; @@ -1189,10 +1215,29 @@ #define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230 #define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240 /* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0; - [9:8] = mask close the gates signals of function 0 toward PXP [8] and NIG - [9]. Zero = mask; one = unmask */ + [9:8] = raserved. Zero = mask; one = unmask */ #define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060 #define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064 +/* [RW 1] If set a system kill occurred */ +#define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610 +/* [RW 32] Represent the status of the input vector to the AEU when a system + kill occurred. The register is reset in por reset. Mapped as follows: [0] + NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 + mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; + [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] + PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event + function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP + Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for + mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] + BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC + Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw + interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI + Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw + interrupt; */ +#define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600 +#define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604 +#define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608 +#define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c /* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1 Port. */ #define MISC_REG_BOND_ID 0xa400 @@ -1206,8 +1251,80 @@ starts at 0x0 for the A0 tape-out and increments by one for each all-layer tape-out. */ #define MISC_REG_CHIP_REV 0xa40c -/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32 - clients. Each client can be controlled by one driver only. One in each +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_10 0xa3e0 +#define MISC_REG_DRIVER_CONTROL_10_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_11 0xa3e8 +#define MISC_REG_DRIVER_CONTROL_11_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_12 0xa3f0 +#define MISC_REG_DRIVER_CONTROL_12_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_13 0xa3f8 +#define MISC_REG_DRIVER_CONTROL_13_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each bit represent that this driver control the appropriate client (Ex: bit 5 is set means this driver control client number 5). addr1 = set; addr0 = clear; read from both addresses will give the same result = status. write @@ -1223,6 +1340,47 @@ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will be asserted). */ #define MISC_REG_DRIVER_CONTROL_1 0xa510 +#define MISC_REG_DRIVER_CONTROL_14 0xa5e0 +#define MISC_REG_DRIVER_CONTROL_14_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_15 0xa5e8 +#define MISC_REG_DRIVER_CONTROL_15_SIZE 2 +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_16 0xa5f0 +#define MISC_REG_DRIVER_CONTROL_16_SIZE 2 +/* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0 + only. */ +#define MISC_REG_E1HMF_MODE 0xa5f8 /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of these bits is written as a '1'; the corresponding SPIO bit will turn off it's drivers and become an input. This is the reset state of all GPIO @@ -1240,6 +1398,18 @@ This is the result value of the pin; not the drive value. Writing these bits will have not effect. */ #define MISC_REG_GPIO 0xa490 +/* [R 28] this field hold the last information that caused reserved + attention. bits [19:0] - address; [22:20] function; [23] reserved; + [27:24] the master thatcaused the attention - according to the following + encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = + dbu; 8 = dmae */ +#define MISC_REG_GRC_RSV_ATTN 0xa3c0 +/* [R 28] this field hold the last information that caused timeout + attention. bits [19:0] - address; [22:20] function; [23] reserved; + [27:24] the master thatcaused the attention - according to the following + encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = + dbu; 8 = dmae */ +#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any access that does not finish within ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is @@ -1282,6 +1452,11 @@ #define MISC_REG_MISC_PRTY_MASK 0xa398 /* [R 1] Parity register #0 read */ #define MISC_REG_MISC_PRTY_STS 0xa38c +#define MISC_REG_NIG_WOL_P0 0xa270 +#define MISC_REG_NIG_WOL_P1 0xa274 +/* [R 1] If set indicate that the pcie_rst_b was asserted without perst + assertion */ +#define MISC_REG_PCIE_HOT_RESET 0xa618 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 @@ -1303,7 +1478,7 @@ #define MISC_REG_PLL_STORM_CTRL_2 0xa298 #define MISC_REG_PLL_STORM_CTRL_3 0xa29c #define MISC_REG_PLL_STORM_CTRL_4 0xa2a0 -/* [RW 32] reset reg#1; rite/read one = the specific block is out of reset; +/* [RW 32] reset reg#2; rite/read one = the specific block is out of reset; write/read zero = the specific block is in reset; addr 0-wr- the write value will be written to the register; addr 1-set - one will be written to all the bits that have the value of one in the data written (bits that @@ -1311,14 +1486,12 @@ written to all the bits that have the value of one in the data written (bits that have the value of zero will not be change); addr 3-ignore; read ignore from all addr except addr 00; inside order of the bits is: - [0] rst_brb1; [1] rst_prs; [2] rst_src; [3] rst_tsdm; [4] rst_tsem; [5] - rst_tcm; [6] rst_rbcr; [7] rst_nig; [8] rst_usdm; [9] rst_ucm; [10] - rst_usem; [11] rst_upb; [12] rst_ccm; [13] rst_csem; [14] rst_csdm; [15] - rst_rbcu; [16] rst_pbf; [17] rst_qm; [18] rst_tm; [19] rst_dorq; [20] - rst_xcm; [21] rst_xsdm; [22] rst_xsem; [23] rst_rbct; [24] rst_cdu; [25] - rst_cfc; [26] rst_pxp; [27] rst_pxpv; [28] rst_rbcp; [29] rst_hc; [30] - rst_dmae; [31] rst_semi_rtc; */ -#define MISC_REG_RESET_REG_1 0xa580 + [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc; + [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7] + rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn; + [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13] + Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16] + rst_pxp_rq_rd_wr; 31:17] reserved */ #define MISC_REG_RESET_REG_2 0xa590 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is shared with the driver resides */ @@ -1345,7 +1518,7 @@ select VAUX supply. (This is an output pin only; it is not controlled by the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT field is not applicable for this pin; only the VALUE fields is relevant - - it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6] + it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6] Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP device ID select; read by UMP firmware. */ #define MISC_REG_SPIO 0xa4fc @@ -1394,8 +1567,9 @@ #define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8 /* [RW 1] output enable for RX BRB1 LP IF */ #define NIG_REG_BRB_LB_OUT_EN 0x10100 -/* [WB_W 72] Debug packet to LP from RBC; Data spelling:[63:0] data; 64] - error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush */ +/* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64] + error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush; + 72:73]-vnic_num; 81:74]-sideband_info */ #define NIG_REG_DEBUG_PACKET_LB 0x10800 /* [RW 1] Input enable for TX Debug packet */ #define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc @@ -1409,6 +1583,8 @@ /* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs to emac for port0; other way to bmac for port0 */ #define NIG_REG_EGRESS_EMAC0_PORT 0x10058 +/* [RW 32] TX_MNG_FIFO in NIG_TX_PORT0; data[31:0] written in FIFO order. */ +#define NIG_REG_EGRESS_MNG0_FIFO 0x1045c /* [RW 1] Input enable for TX PBF user packet port0 IF */ #define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc /* [RW 1] Input enable for TX PBF user packet port1 IF */ @@ -1438,6 +1614,8 @@ #define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4 /* [RW 1] led 10g for port 0 */ #define NIG_REG_LED_10G_P0 0x10320 +/* [RW 1] led 10g for port 1 */ +#define NIG_REG_LED_10G_P1 0x10324 /* [RW 1] Port0: This bit is set to enable the use of the ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field defined below. If this bit is cleared; then the blink rate will be about @@ -1470,19 +1648,47 @@ /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3; 9-11PHY7; 12 MAC4; 13-15 PHY10; */ #define NIG_REG_LED_MODE_P0 0x102f0 +#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c +#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154 #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244 +#define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048 /* [RW 1] send to BRB1 if no match on any of RMP rules. */ #define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c +/* [RW 2] Determine the classification participants. 0: no classification.1: + classification upon VLAN id. 2: classification upon MAC address. 3: + classification upon both VLAN id & MAC addr. */ +#define NIG_REG_LLH0_CLS_TYPE 0x16080 /* [RW 32] cm header for llh0 */ #define NIG_REG_LLH0_CM_HEADER 0x1007c +#define NIG_REG_LLH0_DEST_IP_0_1 0x101dc +#define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0 +/* [RW 16] destination TCP address 1. The LLH will look for this address in + all incoming packets. */ +#define NIG_REG_LLH0_DEST_TCP_0 0x10220 +/* [RW 16] destination UDP address 1 The LLH will look for this address in + all incoming packets. */ +#define NIG_REG_LLH0_DEST_UDP_0 0x10214 #define NIG_REG_LLH0_ERROR_MASK 0x1008c /* [RW 8] event id for llh0 */ #define NIG_REG_LLH0_EVENT_ID 0x10084 +#define NIG_REG_LLH0_FUNC_EN 0x160fc +#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100 +/* [RW 1] Determine the IP version to look for in + ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */ +#define NIG_REG_LLH0_IPV4_IPV6_0 0x10208 +/* [RW 1] t bit for llh0 */ +#define NIG_REG_LLH0_T_BIT 0x10074 +/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */ +#define NIG_REG_LLH0_VLAN_ID_0 0x1022c /* [RW 8] init credit counter for port0 in LLH */ #define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554 #define NIG_REG_LLH0_XCM_MASK 0x10130 /* [RW 1] send to BRB1 if no match on any of RMP rules. */ #define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc +/* [RW 2] Determine the classification participants. 0: no classification.1: + classification upon VLAN id. 2: classification upon MAC address. 3: + classification upon both VLAN id & MAC addr. */ +#define NIG_REG_LLH1_CLS_TYPE 0x16084 /* [RW 32] cm header for llh1 */ #define NIG_REG_LLH1_CM_HEADER 0x10080 #define NIG_REG_LLH1_ERROR_MASK 0x10090 @@ -1491,13 +1697,26 @@ /* [RW 8] init credit counter for port1 in LLH */ #define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564 #define NIG_REG_LLH1_XCM_MASK 0x10134 +/* [RW 1] When this bit is set; the LLH will expect all packets to be with + e1hov */ +#define NIG_REG_LLH_E1HOV_MODE 0x160d8 +/* [RW 1] When this bit is set; the LLH will classify the packet before + sending it to the BRB or calculating WoL on it. */ +#define NIG_REG_LLH_MF_MODE 0x16024 #define NIG_REG_MASK_INTERRUPT_PORT0 0x10330 #define NIG_REG_MASK_INTERRUPT_PORT1 0x10334 /* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */ #define NIG_REG_NIG_EMAC0_EN 0x1003c +/* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */ +#define NIG_REG_NIG_EMAC1_EN 0x10040 /* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the EMAC0 to strip the CRC from the ingress packets. */ #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 +/* [R 32] Interrupt register #0 read */ +#define NIG_REG_NIG_INT_STS_0 0x103b0 +#define NIG_REG_NIG_INT_STS_1 0x103c0 +/* [R 32] Parity register #0 read */ +#define NIG_REG_NIG_PRTY_STS 0x103d0 /* [RW 1] Input enable for RX PBF LP IF */ #define NIG_REG_PBF_LB_IN_EN 0x100b4 /* [RW 1] Value of this register will be transmitted to port swap when @@ -1529,8 +1748,12 @@ #define NIG_REG_XCM0_OUT_EN 0x100f0 /* [RW 1] output enable for RX_XCM1 IF */ #define NIG_REG_XCM1_OUT_EN 0x100f4 +/* [RW 1] control to xgxs - remote PHY in-band MDIO */ +#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348 /* [RW 5] control to xgxs - CL45 DEVAD */ #define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c +/* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */ +#define NIG_REG_XGXS0_CTRL_MD_ST 0x10338 /* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */ #define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340 /* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */ @@ -1658,11 +1881,15 @@ #define PRS_REG_CM_HDR_TYPE_4 0x40088 /* [RW 32] The CM header in case there was not a match on the connection */ #define PRS_REG_CM_NO_MATCH_HDR 0x400b8 +/* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */ +#define PRS_REG_E1HOV_MODE 0x401c8 /* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet start message to TCM. */ #define PRS_REG_EVENT_ID_1 0x40054 #define PRS_REG_EVENT_ID_2 0x40058 #define PRS_REG_EVENT_ID_3 0x4005c +/* [RW 16] The Ethernet type value for FCoE */ +#define PRS_REG_FCOE_TYPE 0x401d0 /* [RW 8] Context region for flush packet with packet type 0. Used in CFC load request message. */ #define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004 @@ -1732,6 +1959,11 @@ #define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 #define PXP2_REG_PGL_CONTROL0 0x120490 #define PXP2_REG_PGL_CONTROL1 0x120514 +/* [RW 32] third dword data of expansion rom request. this register is + special. reading from it provides a vector outstanding read requests. if + a bit is zero it means that a read request on the corresponding tag did + not finish yet (not all completions have arrived for it) */ +#define PXP2_REG_PGL_EXP_ROM2 0x120808 /* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask; its[15:0]-address */ #define PXP2_REG_PGL_INT_CSDM_0 0x1204f4 @@ -1775,8 +2007,7 @@ /* [R 1] this bit indicates that a read request was blocked because of bus_master_en was deasserted */ #define PXP2_REG_PGL_READ_BLOCKED 0x120568 -/* [R 6] debug only */ -#define PXP2_REG_PGL_TXR_CDTS 0x120528 +#define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8 /* [R 18] debug only */ #define PXP2_REG_PGL_TXW_CDTS 0x12052c /* [R 1] this bit indicates that a write request was blocked because of @@ -1828,6 +2059,7 @@ #define PXP2_REG_PSWRQ_QM0_L2P 0x120038 #define PXP2_REG_PSWRQ_SRC0_L2P 0x120054 #define PXP2_REG_PSWRQ_TM0_L2P 0x12001c +#define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0 /* [RW 25] Interrupt mask register #0 read/write */ #define PXP2_REG_PXP2_INT_MASK 0x120578 /* [R 25] Interrupt register #0 read */ @@ -2016,8 +2248,12 @@ #define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4 /* [RW 7] Bandwidth upper bound for VQ30 */ #define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8 +/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */ +#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008 /* [RW 2] Endian mode for cdu */ #define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0 +#define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c +#define PXP2_REG_RQ_CDU_LAST_ILT 0x120620 /* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_CDU_P_SIZE 0x120018 @@ -2029,14 +2265,26 @@ /* [RW 1] When '1'; requests will enter input buffers but wont get out towards the glue */ #define PXP2_REG_RQ_DISABLE_INPUTS 0x120330 +/* [RW 1] 1 - SR will be aligned by 64B; 0 - SR will be aligned by 8B */ +#define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0 +/* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will + be asserted */ +#define PXP2_REG_RQ_ELT_DISABLE 0x12066c /* [RW 2] Endian mode for hc */ #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 +/* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back + compatibility needs; Note that different registers are used per mode */ +#define PXP2_REG_RQ_ILT_MODE 0x1205b4 /* [WB 53] Onchip address table */ #define PXP2_REG_RQ_ONCHIP_AT 0x122000 +/* [WB 53] Onchip address table - B0 */ +#define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000 /* [RW 13] Pending read limiter threshold; in Dwords */ #define PXP2_REG_RQ_PDR_LIMIT 0x12033c /* [RW 2] Endian mode for qm */ #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 +#define PXP2_REG_RQ_QM_FIRST_ILT 0x120634 +#define PXP2_REG_RQ_QM_LAST_ILT 0x120638 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_QM_P_SIZE 0x120050 @@ -2050,16 +2298,22 @@ #define PXP2_REG_RQ_RD_MBS1 0x120168 /* [RW 2] Endian mode for src */ #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c +#define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c +#define PXP2_REG_RQ_SRC_LAST_ILT 0x120640 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_SRC_P_SIZE 0x12006c /* [RW 2] Endian mode for tm */ #define PXP2_REG_RQ_TM_ENDIAN_M 0x120198 +#define PXP2_REG_RQ_TM_FIRST_ILT 0x120644 +#define PXP2_REG_RQ_TM_LAST_ILT 0x120648 /* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k; -128k */ #define PXP2_REG_RQ_TM_P_SIZE 0x120034 /* [R 5] Number of entries in the ufifo; his fifo has l2p completions */ #define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c +/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */ +#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094 /* [R 8] Number of entries occupied by vq 0 in pswrq memory */ #define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810 /* [R 8] Number of entries occupied by vq 10 in pswrq memory */ @@ -2130,19 +2384,63 @@ /* [RW 3] Max burst size filed for write requests port 1; 000 - 128B; 001:256B; 010: 512B; */ #define PXP2_REG_RQ_WR_MBS1 0x120164 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_CDU_MPS 0x1205f0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_CSDM_MPS 0x1205d0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_DBG_MPS 0x1205e8 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_DMAE_MPS 0x1205ec /* [RW 10] if Number of entries in dmae fifo will be higer than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_DMAE_TH 0x120368 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_HC_MPS 0x1205c8 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_QM_MPS 0x1205dc +/* [RW 1] 0 - working in A0 mode; - working in B0 mode */ +#define PXP2_REG_WR_REV_MODE 0x120670 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_SRC_MPS 0x1205e4 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_TM_MPS 0x1205e0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_TSDM_MPS 0x1205d4 /* [RW 10] if Number of entries in usdmdp fifo will be higer than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_USDMDP_TH 0x120348 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_USDM_MPS 0x1205cc +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_XSDM_MPS 0x1205d8 /* [R 1] debug only: Indication if PSWHST arbiter is idle */ #define PXP_REG_HST_ARB_IS_IDLE 0x103004 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means this client is waiting for the arbiter. */ #define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008 +/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit + should update accoring to 'hst_discard_doorbells' register when the state + machine is idle */ +#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0 +/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1' + means this PSWHST is discarding inputs from this client. Each bit should + update accoring to 'hst_discard_internal_writes' register when the state + machine is idle. */ +#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c /* [WB 160] Used for initialization of the inbound interrupts memory */ #define PXP_REG_HST_INBOUND_INT 0x103800 /* [RW 32] Interrupt mask register #0 read/write */ @@ -2165,18 +2463,25 @@ #define QM_REG_ACTCTRINITVAL_3 0x16804c /* [RW 32] The base logical address (in bytes) of each physical queue. The index I represents the physical queue number. The 12 lsbs are ignore and - considered zero so practically there are only 20 bits in this register. */ + considered zero so practically there are only 20 bits in this register; + queues 63-0 */ #define QM_REG_BASEADDR 0x168900 /* [RW 16] The byte credit cost for each task. This value is for both ports */ #define QM_REG_BYTECRDCOST 0x168234 /* [RW 16] The initial byte credit value for both ports. */ #define QM_REG_BYTECRDINITVAL 0x168238 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical - queue uses port 0 else it uses port 1. */ + queue uses port 0 else it uses port 1; queues 31-0 */ #define QM_REG_BYTECRDPORT_LSB 0x168228 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical - queue uses port 0 else it uses port 1. */ + queue uses port 0 else it uses port 1; queues 95-64 */ +#define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 63-32 */ #define QM_REG_BYTECRDPORT_MSB 0x168224 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 127-96 */ +#define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c /* [RW 16] The byte credit value that if above the QM is considered almost full */ #define QM_REG_BYTECREDITAFULLTHR 0x168094 @@ -2203,7 +2508,7 @@ #define QM_REG_CMINTVOQMASK_6 0x16820c #define QM_REG_CMINTVOQMASK_7 0x168210 /* [RW 20] The number of connections divided by 16 which dictates the size - of each queue per port 0 */ + of each queue which belongs to even function number. */ #define QM_REG_CONNNUM_0 0x168020 /* [R 6] Keep the fill level of the fifo from write client 4 */ #define QM_REG_CQM_WRC_FIFOLVL 0x168018 @@ -2216,74 +2521,179 @@ bypass enable */ #define QM_REG_ENBYPVOQMASK 0x16823c /* [RW 32] A bit mask per each physical queue. If a bit is set then the - physical queue uses the byte credit */ + physical queue uses the byte credit; queues 31-0 */ #define QM_REG_ENBYTECRD_LSB 0x168220 /* [RW 32] A bit mask per each physical queue. If a bit is set then the - physical queue uses the byte credit */ + physical queue uses the byte credit; queues 95-64 */ +#define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518 +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 63-32 */ #define QM_REG_ENBYTECRD_MSB 0x16821c +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 127-96 */ +#define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514 /* [RW 4] If cleared then the secondary interface will not be served by the RR arbiter */ #define QM_REG_ENSEC 0x1680f0 -/* [RW 32] A bit vector per each physical queue which selects which function - number to use on PCI access for that queue. */ +/* [RW 32] NA */ #define QM_REG_FUNCNUMSEL_LSB 0x168230 -/* [RW 32] A bit vector per each physical queue which selects which function - number to use on PCI access for that queue. */ +/* [RW 32] NA */ #define QM_REG_FUNCNUMSEL_MSB 0x16822c /* [RW 32] A mask register to mask the Almost empty signals which will not - be use for the almost empty indication to the HW block */ + be use for the almost empty indication to the HW block; queues 31:0 */ #define QM_REG_HWAEMPTYMASK_LSB 0x168218 /* [RW 32] A mask register to mask the Almost empty signals which will not - be use for the almost empty indication to the HW block */ + be use for the almost empty indication to the HW block; queues 95-64 */ +#define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 63:32 */ #define QM_REG_HWAEMPTYMASK_MSB 0x168214 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 127-96 */ +#define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c /* [RW 4] The number of outstanding request to CFC */ #define QM_REG_OUTLDREQ 0x168804 /* [RC 1] A flag to indicate that overflow error occurred in one of the queues. */ #define QM_REG_OVFERROR 0x16805c -/* [RC 6] the Q were the qverflow occurs */ +/* [RC 7] the Q were the qverflow occurs */ #define QM_REG_OVFQNUM 0x168058 -/* [R 32] Pause state for physical queues 31-0 */ +/* [R 16] Pause state for physical queues 15-0 */ #define QM_REG_PAUSESTATE0 0x168410 -/* [R 32] Pause state for physical queues 64-32 */ +/* [R 16] Pause state for physical queues 31-16 */ #define QM_REG_PAUSESTATE1 0x168414 +/* [R 16] Pause state for physical queues 47-32 */ +#define QM_REG_PAUSESTATE2 0x16e684 +/* [R 16] Pause state for physical queues 63-48 */ +#define QM_REG_PAUSESTATE3 0x16e688 +/* [R 16] Pause state for physical queues 79-64 */ +#define QM_REG_PAUSESTATE4 0x16e68c +/* [R 16] Pause state for physical queues 95-80 */ +#define QM_REG_PAUSESTATE5 0x16e690 +/* [R 16] Pause state for physical queues 111-96 */ +#define QM_REG_PAUSESTATE6 0x16e694 +/* [R 16] Pause state for physical queues 127-112 */ +#define QM_REG_PAUSESTATE7 0x16e698 /* [RW 2] The PCI attributes field used in the PCI request. */ #define QM_REG_PCIREQAT 0x168054 /* [R 16] The byte credit of port 0 */ #define QM_REG_PORT0BYTECRD 0x168300 /* [R 16] The byte credit of port 1 */ #define QM_REG_PORT1BYTECRD 0x168304 -/* [WB 54] Pointer Table Memory; The mapping is as follow: ptrtbl[53:30] - read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read bank0; - ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +/* [RW 3] pci function number of queues 15-0 */ +#define QM_REG_PQ2PCIFUNC_0 0x16e6bc +#define QM_REG_PQ2PCIFUNC_1 0x16e6c0 +#define QM_REG_PQ2PCIFUNC_2 0x16e6c4 +#define QM_REG_PQ2PCIFUNC_3 0x16e6c8 +#define QM_REG_PQ2PCIFUNC_4 0x16e6cc +#define QM_REG_PQ2PCIFUNC_5 0x16e6d0 +#define QM_REG_PQ2PCIFUNC_6 0x16e6d4 +#define QM_REG_PQ2PCIFUNC_7 0x16e6d8 +/* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow: + ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read + bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ #define QM_REG_PTRTBL 0x168a00 +/* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow: + ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read + bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +#define QM_REG_PTRTBL_EXT_A 0x16e200 /* [RW 2] Interrupt mask register #0 read/write */ #define QM_REG_QM_INT_MASK 0x168444 /* [R 2] Interrupt register #0 read */ #define QM_REG_QM_INT_STS 0x168438 -/* [RW 9] Parity mask register #0 read/write */ +/* [RW 12] Parity mask register #0 read/write */ #define QM_REG_QM_PRTY_MASK 0x168454 -/* [R 9] Parity register #0 read */ +/* [R 12] Parity register #0 read */ #define QM_REG_QM_PRTY_STS 0x168448 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */ #define QM_REG_QSTATUS_HIGH 0x16802c +/* [R 32] Current queues in pipeline: Queues from 96 to 127 */ +#define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */ #define QM_REG_QSTATUS_LOW 0x168028 -/* [R 24] The number of tasks queued for each queue */ +/* [R 32] Current queues in pipeline: Queues from 64 to 95 */ +#define QM_REG_QSTATUS_LOW_EXT_A 0x16e404 +/* [R 24] The number of tasks queued for each queue; queues 63-0 */ #define QM_REG_QTASKCTR_0 0x168308 +/* [R 24] The number of tasks queued for each queue; queues 127-64 */ +#define QM_REG_QTASKCTR_EXT_A_0 0x16e584 /* [RW 4] Queue tied to VOQ */ #define QM_REG_QVOQIDX_0 0x1680f4 #define QM_REG_QVOQIDX_10 0x16811c +#define QM_REG_QVOQIDX_100 0x16e49c +#define QM_REG_QVOQIDX_101 0x16e4a0 +#define QM_REG_QVOQIDX_102 0x16e4a4 +#define QM_REG_QVOQIDX_103 0x16e4a8 +#define QM_REG_QVOQIDX_104 0x16e4ac +#define QM_REG_QVOQIDX_105 0x16e4b0 +#define QM_REG_QVOQIDX_106 0x16e4b4 +#define QM_REG_QVOQIDX_107 0x16e4b8 +#define QM_REG_QVOQIDX_108 0x16e4bc +#define QM_REG_QVOQIDX_109 0x16e4c0 +#define QM_REG_QVOQIDX_100 0x16e49c +#define QM_REG_QVOQIDX_101 0x16e4a0 +#define QM_REG_QVOQIDX_102 0x16e4a4 +#define QM_REG_QVOQIDX_103 0x16e4a8 +#define QM_REG_QVOQIDX_104 0x16e4ac +#define QM_REG_QVOQIDX_105 0x16e4b0 +#define QM_REG_QVOQIDX_106 0x16e4b4 +#define QM_REG_QVOQIDX_107 0x16e4b8 +#define QM_REG_QVOQIDX_108 0x16e4bc +#define QM_REG_QVOQIDX_109 0x16e4c0 #define QM_REG_QVOQIDX_11 0x168120 +#define QM_REG_QVOQIDX_110 0x16e4c4 +#define QM_REG_QVOQIDX_111 0x16e4c8 +#define QM_REG_QVOQIDX_112 0x16e4cc +#define QM_REG_QVOQIDX_113 0x16e4d0 +#define QM_REG_QVOQIDX_114 0x16e4d4 +#define QM_REG_QVOQIDX_115 0x16e4d8 +#define QM_REG_QVOQIDX_116 0x16e4dc +#define QM_REG_QVOQIDX_117 0x16e4e0 +#define QM_REG_QVOQIDX_118 0x16e4e4 +#define QM_REG_QVOQIDX_119 0x16e4e8 +#define QM_REG_QVOQIDX_110 0x16e4c4 +#define QM_REG_QVOQIDX_111 0x16e4c8 +#define QM_REG_QVOQIDX_112 0x16e4cc +#define QM_REG_QVOQIDX_113 0x16e4d0 +#define QM_REG_QVOQIDX_114 0x16e4d4 +#define QM_REG_QVOQIDX_115 0x16e4d8 +#define QM_REG_QVOQIDX_116 0x16e4dc +#define QM_REG_QVOQIDX_117 0x16e4e0 +#define QM_REG_QVOQIDX_118 0x16e4e4 +#define QM_REG_QVOQIDX_119 0x16e4e8 #define QM_REG_QVOQIDX_12 0x168124 +#define QM_REG_QVOQIDX_120 0x16e4ec +#define QM_REG_QVOQIDX_121 0x16e4f0 +#define QM_REG_QVOQIDX_122 0x16e4f4 +#define QM_REG_QVOQIDX_123 0x16e4f8 +#define QM_REG_QVOQIDX_124 0x16e4fc +#define QM_REG_QVOQIDX_125 0x16e500 +#define QM_REG_QVOQIDX_126 0x16e504 +#define QM_REG_QVOQIDX_127 0x16e508 +#define QM_REG_QVOQIDX_120 0x16e4ec +#define QM_REG_QVOQIDX_121 0x16e4f0 +#define QM_REG_QVOQIDX_122 0x16e4f4 +#define QM_REG_QVOQIDX_123 0x16e4f8 +#define QM_REG_QVOQIDX_124 0x16e4fc +#define QM_REG_QVOQIDX_125 0x16e500 +#define QM_REG_QVOQIDX_126 0x16e504 +#define QM_REG_QVOQIDX_127 0x16e508 #define QM_REG_QVOQIDX_13 0x168128 #define QM_REG_QVOQIDX_14 0x16812c #define QM_REG_QVOQIDX_15 0x168130 #define QM_REG_QVOQIDX_16 0x168134 #define QM_REG_QVOQIDX_17 0x168138 #define QM_REG_QVOQIDX_21 0x168148 +#define QM_REG_QVOQIDX_22 0x16814c +#define QM_REG_QVOQIDX_23 0x168150 +#define QM_REG_QVOQIDX_24 0x168154 #define QM_REG_QVOQIDX_25 0x168158 +#define QM_REG_QVOQIDX_26 0x16815c +#define QM_REG_QVOQIDX_27 0x168160 +#define QM_REG_QVOQIDX_28 0x168164 #define QM_REG_QVOQIDX_29 0x168168 +#define QM_REG_QVOQIDX_30 0x16816c +#define QM_REG_QVOQIDX_31 0x168170 #define QM_REG_QVOQIDX_32 0x168174 #define QM_REG_QVOQIDX_33 0x168178 #define QM_REG_QVOQIDX_34 0x16817c @@ -2328,17 +2738,95 @@ #define QM_REG_QVOQIDX_61 0x1681e8 #define QM_REG_QVOQIDX_62 0x1681ec #define QM_REG_QVOQIDX_63 0x1681f0 +#define QM_REG_QVOQIDX_64 0x16e40c +#define QM_REG_QVOQIDX_65 0x16e410 +#define QM_REG_QVOQIDX_66 0x16e414 +#define QM_REG_QVOQIDX_67 0x16e418 +#define QM_REG_QVOQIDX_68 0x16e41c +#define QM_REG_QVOQIDX_69 0x16e420 #define QM_REG_QVOQIDX_60 0x1681e4 #define QM_REG_QVOQIDX_61 0x1681e8 #define QM_REG_QVOQIDX_62 0x1681ec #define QM_REG_QVOQIDX_63 0x1681f0 +#define QM_REG_QVOQIDX_64 0x16e40c +#define QM_REG_QVOQIDX_65 0x16e410 +#define QM_REG_QVOQIDX_69 0x16e420 #define QM_REG_QVOQIDX_7 0x168110 +#define QM_REG_QVOQIDX_70 0x16e424 +#define QM_REG_QVOQIDX_71 0x16e428 +#define QM_REG_QVOQIDX_72 0x16e42c +#define QM_REG_QVOQIDX_73 0x16e430 +#define QM_REG_QVOQIDX_74 0x16e434 +#define QM_REG_QVOQIDX_75 0x16e438 +#define QM_REG_QVOQIDX_76 0x16e43c +#define QM_REG_QVOQIDX_77 0x16e440 +#define QM_REG_QVOQIDX_78 0x16e444 +#define QM_REG_QVOQIDX_79 0x16e448 +#define QM_REG_QVOQIDX_70 0x16e424 +#define QM_REG_QVOQIDX_71 0x16e428 +#define QM_REG_QVOQIDX_72 0x16e42c +#define QM_REG_QVOQIDX_73 0x16e430 +#define QM_REG_QVOQIDX_74 0x16e434 +#define QM_REG_QVOQIDX_75 0x16e438 +#define QM_REG_QVOQIDX_76 0x16e43c +#define QM_REG_QVOQIDX_77 0x16e440 +#define QM_REG_QVOQIDX_78 0x16e444 +#define QM_REG_QVOQIDX_79 0x16e448 #define QM_REG_QVOQIDX_8 0x168114 +#define QM_REG_QVOQIDX_80 0x16e44c +#define QM_REG_QVOQIDX_81 0x16e450 +#define QM_REG_QVOQIDX_82 0x16e454 +#define QM_REG_QVOQIDX_83 0x16e458 +#define QM_REG_QVOQIDX_84 0x16e45c +#define QM_REG_QVOQIDX_85 0x16e460 +#define QM_REG_QVOQIDX_86 0x16e464 +#define QM_REG_QVOQIDX_87 0x16e468 +#define QM_REG_QVOQIDX_88 0x16e46c +#define QM_REG_QVOQIDX_89 0x16e470 +#define QM_REG_QVOQIDX_80 0x16e44c +#define QM_REG_QVOQIDX_81 0x16e450 +#define QM_REG_QVOQIDX_85 0x16e460 +#define QM_REG_QVOQIDX_86 0x16e464 +#define QM_REG_QVOQIDX_87 0x16e468 +#define QM_REG_QVOQIDX_88 0x16e46c +#define QM_REG_QVOQIDX_89 0x16e470 #define QM_REG_QVOQIDX_9 0x168118 -/* [R 24] Remaining pause timeout for port 0 */ +#define QM_REG_QVOQIDX_90 0x16e474 +#define QM_REG_QVOQIDX_91 0x16e478 +#define QM_REG_QVOQIDX_92 0x16e47c +#define QM_REG_QVOQIDX_93 0x16e480 +#define QM_REG_QVOQIDX_94 0x16e484 +#define QM_REG_QVOQIDX_95 0x16e488 +#define QM_REG_QVOQIDX_96 0x16e48c +#define QM_REG_QVOQIDX_97 0x16e490 +#define QM_REG_QVOQIDX_98 0x16e494 +#define QM_REG_QVOQIDX_99 0x16e498 +#define QM_REG_QVOQIDX_90 0x16e474 +#define QM_REG_QVOQIDX_91 0x16e478 +#define QM_REG_QVOQIDX_92 0x16e47c +#define QM_REG_QVOQIDX_93 0x16e480 +#define QM_REG_QVOQIDX_94 0x16e484 +#define QM_REG_QVOQIDX_95 0x16e488 +#define QM_REG_QVOQIDX_96 0x16e48c +#define QM_REG_QVOQIDX_97 0x16e490 +#define QM_REG_QVOQIDX_98 0x16e494 +#define QM_REG_QVOQIDX_99 0x16e498 +/* [R 24] Remaining pause timeout for queues 15-0 */ #define QM_REG_REMAINPAUSETM0 0x168418 -/* [R 24] Remaining pause timeout for port 1 */ +/* [R 24] Remaining pause timeout for queues 31-16 */ #define QM_REG_REMAINPAUSETM1 0x16841c +/* [R 24] Remaining pause timeout for queues 47-32 */ +#define QM_REG_REMAINPAUSETM2 0x16e69c +/* [R 24] Remaining pause timeout for queues 63-48 */ +#define QM_REG_REMAINPAUSETM3 0x16e6a0 +/* [R 24] Remaining pause timeout for queues 79-64 */ +#define QM_REG_REMAINPAUSETM4 0x16e6a4 +/* [R 24] Remaining pause timeout for queues 95-80 */ +#define QM_REG_REMAINPAUSETM5 0x16e6a8 +/* [R 24] Remaining pause timeout for queues 111-96 */ +#define QM_REG_REMAINPAUSETM6 0x16e6ac +/* [R 24] Remaining pause timeout for queues 127-112 */ +#define QM_REG_REMAINPAUSETM7 0x16e6b0 /* [RW 1] Initialization bit command */ #define QM_REG_SOFT_RESET 0x168428 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */ @@ -2372,44 +2860,103 @@ #define QM_REG_VOQINITCREDIT_4 0x168070 #define QM_REG_VOQINITCREDIT_5 0x168074 /* [RW 1] The port of which VOQ belongs */ +#define QM_REG_VOQPORT_0 0x1682a0 #define QM_REG_VOQPORT_1 0x1682a4 #define QM_REG_VOQPORT_10 0x1682c8 #define QM_REG_VOQPORT_11 0x1682cc #define QM_REG_VOQPORT_2 0x1682a8 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_0_LSB 0x168240 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_0_MSB 0x168244 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_10_LSB 0x168290 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_10_MSB 0x168294 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_11_LSB 0x168298 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_11_MSB 0x16829c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_1_LSB 0x168248 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_1_MSB 0x16824c -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_2_LSB 0x168250 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_2_MSB 0x168254 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_3_LSB 0x168258 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_4_LSB 0x168260 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_4_MSB 0x168264 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_5_LSB 0x168268 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_5_MSB 0x16826c -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_6_LSB 0x168270 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_6_MSB 0x168274 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_7_LSB 0x168278 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_7_MSB 0x16827c -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_8_LSB 0x168280 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ #define QM_REG_VOQQMASK_8_MSB 0x168284 -/* [RW 32] The physical queue number associated with each VOQ */ +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ #define QM_REG_VOQQMASK_9_LSB 0x168288 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570 /* [RW 32] Wrr weights */ #define QM_REG_WRRWEIGHTS_0 0x16880c #define QM_REG_WRRWEIGHTS_1 0x168810 @@ -2431,14 +2978,78 @@ #define QM_REG_WRRWEIGHTS_15 0x168828 #define QM_REG_WRRWEIGHTS_15_SIZE 1 /* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_16 0x16e000 +#define QM_REG_WRRWEIGHTS_16_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_17 0x16e004 +#define QM_REG_WRRWEIGHTS_17_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_18 0x16e008 +#define QM_REG_WRRWEIGHTS_18_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_19 0x16e00c +#define QM_REG_WRRWEIGHTS_19_SIZE 1 +/* [RW 32] Wrr weights */ #define QM_REG_WRRWEIGHTS_10 0x168814 #define QM_REG_WRRWEIGHTS_11 0x168818 #define QM_REG_WRRWEIGHTS_12 0x16881c #define QM_REG_WRRWEIGHTS_13 0x168820 #define QM_REG_WRRWEIGHTS_14 0x168824 #define QM_REG_WRRWEIGHTS_15 0x168828 +#define QM_REG_WRRWEIGHTS_16 0x16e000 +#define QM_REG_WRRWEIGHTS_17 0x16e004 +#define QM_REG_WRRWEIGHTS_18 0x16e008 +#define QM_REG_WRRWEIGHTS_19 0x16e00c #define QM_REG_WRRWEIGHTS_2 0x16882c +#define QM_REG_WRRWEIGHTS_20 0x16e010 +#define QM_REG_WRRWEIGHTS_20_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_21 0x16e014 +#define QM_REG_WRRWEIGHTS_21_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_22 0x16e018 +#define QM_REG_WRRWEIGHTS_22_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_23 0x16e01c +#define QM_REG_WRRWEIGHTS_23_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_24 0x16e020 +#define QM_REG_WRRWEIGHTS_24_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_25 0x16e024 +#define QM_REG_WRRWEIGHTS_25_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_26 0x16e028 +#define QM_REG_WRRWEIGHTS_26_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_27 0x16e02c +#define QM_REG_WRRWEIGHTS_27_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_28 0x16e030 +#define QM_REG_WRRWEIGHTS_28_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_29 0x16e034 +#define QM_REG_WRRWEIGHTS_29_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_20 0x16e010 +#define QM_REG_WRRWEIGHTS_21 0x16e014 +#define QM_REG_WRRWEIGHTS_22 0x16e018 +#define QM_REG_WRRWEIGHTS_23 0x16e01c +#define QM_REG_WRRWEIGHTS_24 0x16e020 +#define QM_REG_WRRWEIGHTS_25 0x16e024 +#define QM_REG_WRRWEIGHTS_26 0x16e028 +#define QM_REG_WRRWEIGHTS_27 0x16e02c +#define QM_REG_WRRWEIGHTS_28 0x16e030 +#define QM_REG_WRRWEIGHTS_29 0x16e034 #define QM_REG_WRRWEIGHTS_3 0x168830 +#define QM_REG_WRRWEIGHTS_30 0x16e038 +#define QM_REG_WRRWEIGHTS_30_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_31 0x16e03c +#define QM_REG_WRRWEIGHTS_31_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_30 0x16e038 +#define QM_REG_WRRWEIGHTS_31 0x16e03c #define QM_REG_WRRWEIGHTS_4 0x168834 #define QM_REG_WRRWEIGHTS_5 0x168838 #define QM_REG_WRRWEIGHTS_6 0x16883c @@ -2447,6 +3058,70 @@ #define QM_REG_WRRWEIGHTS_9 0x168848 /* [R 6] Keep the fill level of the fifo from write client 1 */ #define QM_REG_XQM_WRC_FIFOLVL 0x168000 +#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 #define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0) #define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0 #define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) @@ -2455,6 +3130,22 @@ #define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 #define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) #define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define HC_HC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define HC_HC_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define HC_HC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define HC_HC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 #define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) #define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 #define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) @@ -2463,6 +3154,70 @@ #define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 #define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) #define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define PB_PB_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PB_PB_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define PB_PB_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define PB_PB_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define QM_QM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define QM_QM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define QM_QM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define QM_QM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 #define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) #define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 #define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) @@ -2471,6 +3226,78 @@ #define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 #define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) #define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define TM_TM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define TM_TM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define TM_TM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define TM_TM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 #define CFC_DEBUG1_REG_WRITE_AC (0x1<<4) #define CFC_DEBUG1_REG_WRITE_AC_SIZE 4 /* [R 1] debug only: This bit indicates wheter indicates that external @@ -2483,6 +3310,14 @@ ~dbg_registers_debug_target=0 (internal buffer) */ #define DBG_REG_WRAP_ON_INT_BUFFER 0xc128 #define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1 +#define QM_QM_PRTY_STS_REG_WRBUFF (0x1<<8) +#define QM_QM_PRTY_STS_REG_WRBUFF_SIZE 8 +#define QM_QM_PRTY_STS_CLR_REG_WRBUFF (0x1<<8) +#define QM_QM_PRTY_STS_CLR_REG_WRBUFF_SIZE 8 +#define QM_QM_PRTY_STS_WR_REG_WRBUFF (0x1<<8) +#define QM_QM_PRTY_STS_WR_REG_WRBUFF_SIZE 8 +#define QM_QM_PRTY_MASK_REG_WRBUFF (0x1<<8) +#define QM_QM_PRTY_MASK_REG_WRBUFF_SIZE 8 /* [RW 32] Wrr weights */ #define QM_REG_WRRWEIGHTS_0 0x16880c #define QM_REG_WRRWEIGHTS_0_SIZE 1 @@ -2531,20 +3366,67 @@ /* [RW 32] Wrr weights */ #define QM_REG_WRRWEIGHTS_9 0x168848 #define QM_REG_WRRWEIGHTS_9_SIZE 1 -/* [RW 22] Number of free element in the free list of T2 entries - port 0. */ +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_16 0x16e000 +#define QM_REG_WRRWEIGHTS_16_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_17 0x16e004 +#define QM_REG_WRRWEIGHTS_17_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_18 0x16e008 +#define QM_REG_WRRWEIGHTS_18_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_19 0x16e00c +#define QM_REG_WRRWEIGHTS_19_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_20 0x16e010 +#define QM_REG_WRRWEIGHTS_20_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_21 0x16e014 +#define QM_REG_WRRWEIGHTS_21_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_22 0x16e018 +#define QM_REG_WRRWEIGHTS_22_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_23 0x16e01c +#define QM_REG_WRRWEIGHTS_23_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_24 0x16e020 +#define QM_REG_WRRWEIGHTS_24_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_25 0x16e024 +#define QM_REG_WRRWEIGHTS_25_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_26 0x16e028 +#define QM_REG_WRRWEIGHTS_26_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_27 0x16e02c +#define QM_REG_WRRWEIGHTS_27_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_28 0x16e030 +#define QM_REG_WRRWEIGHTS_28_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_29 0x16e034 +#define QM_REG_WRRWEIGHTS_29_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_30 0x16e038 +#define QM_REG_WRRWEIGHTS_30_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_31 0x16e03c +#define QM_REG_WRRWEIGHTS_31_SIZE 1 #define SRC_REG_COUNTFREE0 0x40500 -/* [WB 64] First free element in the free list of T2 entries - port 0. */ +/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two + ports. If set the searcher support 8 functions. */ +#define SRC_REG_E1HMF_ENABLE 0x404cc #define SRC_REG_FIRSTFREE0 0x40510 #define SRC_REG_KEYRSS0_0 0x40408 +#define SRC_REG_KEYRSS0_7 0x40424 #define SRC_REG_KEYRSS1_9 0x40454 -/* [WB 64] Last free element in the free list of T2 entries - port 0. */ #define SRC_REG_LASTFREE0 0x40530 -/* [RW 5] The number of hash bits used for the search (h); Values can be 8 - to 24. */ #define SRC_REG_NUMBER_HASH_BITS0 0x40400 /* [RW 1] Reset internal state machines. */ #define SRC_REG_SOFT_RST 0x4049c -/* [R 1] Interrupt register #0 read */ +/* [R 3] Interrupt register #0 read */ #define SRC_REG_SRC_INT_STS 0x404ac /* [RW 3] Parity mask register #0 read/write */ #define SRC_REG_SRC_PRTY_MASK 0x404c8 @@ -2637,11 +3519,14 @@ weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define TCM_REG_PBF_WEIGHT 0x500b4 -/* [RW 6] The physical queue number 0 per port index. */ #define TCM_REG_PHYS_QNUM0_0 0x500e0 #define TCM_REG_PHYS_QNUM0_1 0x500e4 -/* [RW 6] The physical queue number 1 per port index. */ #define TCM_REG_PHYS_QNUM1_0 0x500e8 +#define TCM_REG_PHYS_QNUM1_1 0x500ec +#define TCM_REG_PHYS_QNUM2_0 0x500f0 +#define TCM_REG_PHYS_QNUM2_1 0x500f4 +#define TCM_REG_PHYS_QNUM3_0 0x500f8 +#define TCM_REG_PHYS_QNUM3_1 0x500fc /* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -2670,6 +3555,8 @@ #define TCM_REG_TCM_INT_MASK 0x501dc /* [R 11] Interrupt register #0 read */ #define TCM_REG_TCM_INT_STS 0x501d0 +/* [R 27] Parity register #0 read */ +#define TCM_REG_TCM_PRTY_STS 0x501e0 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -2729,6 +3616,7 @@ mechanism. The fields are: [5:0] - length of the message; 15:6] - message pointer; 20:16] - next pointer. */ #define TCM_REG_XX_DESCR_TABLE 0x50280 +#define TCM_REG_XX_DESCR_TABLE_SIZE 32 /* [R 6] Use to read the value of XX protection Free counter. */ #define TCM_REG_XX_FREE 0x50178 /* [RW 6] Initial value for the credit counter; responsible for fulfilling @@ -2780,7 +3668,7 @@ /* [RW 4] Load value for expiration credit cnt. CFC max number of outstanding load requests for timers (expiration) context loading. */ #define TM_REG_EXP_CRDCNT_VAL 0x164238 -/* [RW 18] Linear0 Max active cid. */ +/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */ #define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048 /* [WB 64] Linear0 phy address. */ #define TM_REG_LIN0_PHY_ADDR 0x164270 @@ -2804,6 +3692,21 @@ #define TM_REG_TM_INT_STS 0x1640f0 /* [RW 8] The event id for aggregated interrupt 0 */ #define TSDM_REG_AGG_INT_EVENT_0 0x42038 +#define TSDM_REG_AGG_INT_EVENT_2 0x42040 +#define TSDM_REG_AGG_INT_EVENT_20 0x42088 +#define TSDM_REG_AGG_INT_EVENT_21 0x4208c +#define TSDM_REG_AGG_INT_EVENT_22 0x42090 +#define TSDM_REG_AGG_INT_EVENT_23 0x42094 +#define TSDM_REG_AGG_INT_EVENT_24 0x42098 +#define TSDM_REG_AGG_INT_EVENT_25 0x4209c +#define TSDM_REG_AGG_INT_EVENT_26 0x420a0 +#define TSDM_REG_AGG_INT_EVENT_27 0x420a4 +#define TSDM_REG_AGG_INT_EVENT_28 0x420a8 +#define TSDM_REG_AGG_INT_EVENT_29 0x420ac +#define TSDM_REG_AGG_INT_EVENT_3 0x42044 +#define TSDM_REG_AGG_INT_EVENT_30 0x420b0 +#define TSDM_REG_AGG_INT_EVENT_31 0x420b4 +#define TSDM_REG_AGG_INT_EVENT_4 0x42048 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ #define TSDM_REG_CFC_RSP_START_ADDR 0x42008 /* [RW 16] The maximum value of the competion counter #0 */ @@ -2868,6 +3771,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define TSDM_REG_TSDM_INT_MASK_0 0x4229c #define TSDM_REG_TSDM_INT_MASK_1 0x422ac +/* [R 32] Interrupt register #0 read */ +#define TSDM_REG_TSDM_INT_STS_0 0x42290 +#define TSDM_REG_TSDM_INT_STS_1 0x422a0 /* [RW 11] Parity mask register #0 read/write */ #define TSDM_REG_TSDM_PRTY_MASK 0x422bc /* [R 11] Parity register #0 read */ @@ -2908,9 +3814,8 @@ #define TSEM_REG_ENABLE_OUT 0x1800a8 /* [RW 32] This address space contains all registers and memories that are placed in SEM_FAST block. The SEM_FAST registers are described in - appendix B. In order to access the SEM_FAST registers the base address - TSEM_REGISTERS_FAST_MEMORY (Offset: 0x1a0000) should be added to each - SEM_FAST register offset. */ + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ #define TSEM_REG_FAST_MEMORY 0x1a0000 /* [RW 1] Disables input messages from FIC0 May be updated during run_time by the microcode */ @@ -2921,6 +3826,7 @@ /* [RW 15] Interrupt table Read and write access to it is not possible in the middle of the work */ #define TSEM_REG_INT_TABLE 0x180400 +#define TSEM_REG_INT_TABLE_SIZE 256 /* [ST 24] Statistics register. The number of messages that entered through FIC0 */ #define TSEM_REG_MSG_NUM_FIC0 0x180000 @@ -2993,6 +3899,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define TSEM_REG_TSEM_INT_MASK_0 0x180100 #define TSEM_REG_TSEM_INT_MASK_1 0x180110 +/* [R 32] Interrupt register #0 read */ +#define TSEM_REG_TSEM_INT_STS_0 0x1800f4 +#define TSEM_REG_TSEM_INT_STS_1 0x180104 /* [RW 32] Parity mask register #0 read/write */ #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 @@ -3088,12 +3997,15 @@ #define UCM_REG_N_SM_CTX_LD_2 0xe005c #define UCM_REG_N_SM_CTX_LD_3 0xe0060 #define UCM_REG_N_SM_CTX_LD_4 0xe0064 -/* [RW 6] The physical queue number 0 per port index (CID[23]) */ +#define UCM_REG_N_SM_CTX_LD_5 0xe0068 #define UCM_REG_PHYS_QNUM0_0 0xe0110 #define UCM_REG_PHYS_QNUM0_1 0xe0114 -/* [RW 6] The physical queue number 1 per port index (CID[23]) */ #define UCM_REG_PHYS_QNUM1_0 0xe0118 #define UCM_REG_PHYS_QNUM1_1 0xe011c +#define UCM_REG_PHYS_QNUM2_0 0xe0120 +#define UCM_REG_PHYS_QNUM2_1 0xe0124 +#define UCM_REG_PHYS_QNUM3_0 0xe0128 +#define UCM_REG_PHYS_QNUM3_1 0xe012c /* [RW 8] The Event ID for Timers formatting in case of stop done. */ #define UCM_REG_STOP_EVNT_ID 0xe00ac /* [RC 1] Set when the message length mismatch (relative to last indication) @@ -3132,6 +4044,8 @@ #define UCM_REG_UCM_INT_MASK 0xe01d4 /* [R 11] Interrupt register #0 read */ #define UCM_REG_UCM_INT_STS 0xe01c8 +/* [R 27] Parity register #0 read */ +#define UCM_REG_UCM_PRTY_STS 0xe01d8 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -3189,6 +4103,7 @@ mechanism. The fields are:[5:0] - message length; 14:6] - message pointer; 19:15] - next pointer. */ #define UCM_REG_XX_DESCR_TABLE 0xe0280 +#define UCM_REG_XX_DESCR_TABLE_SIZE 32 /* [R 6] Use to read the XX protection Free counter. */ #define UCM_REG_XX_FREE 0xe016c /* [RW 6] Initial value for the credit counter; responsible for fulfilling @@ -3218,6 +4133,21 @@ #define USDM_REG_AGG_INT_EVENT_17 0xc407c #define USDM_REG_AGG_INT_EVENT_18 0xc4080 #define USDM_REG_AGG_INT_EVENT_19 0xc4084 +#define USDM_REG_AGG_INT_EVENT_2 0xc4040 +#define USDM_REG_AGG_INT_EVENT_20 0xc4088 +#define USDM_REG_AGG_INT_EVENT_21 0xc408c +#define USDM_REG_AGG_INT_EVENT_22 0xc4090 +#define USDM_REG_AGG_INT_EVENT_23 0xc4094 +#define USDM_REG_AGG_INT_EVENT_24 0xc4098 +#define USDM_REG_AGG_INT_EVENT_25 0xc409c +#define USDM_REG_AGG_INT_EVENT_26 0xc40a0 +#define USDM_REG_AGG_INT_EVENT_27 0xc40a4 +#define USDM_REG_AGG_INT_EVENT_28 0xc40a8 +#define USDM_REG_AGG_INT_EVENT_29 0xc40ac +#define USDM_REG_AGG_INT_EVENT_3 0xc4044 +#define USDM_REG_AGG_INT_EVENT_30 0xc40b0 +#define USDM_REG_AGG_INT_EVENT_31 0xc40b4 +#define USDM_REG_AGG_INT_EVENT_4 0xc4048 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0) or auto-mask-mode (1) */ #define USDM_REG_AGG_INT_MODE_0 0xc41b8 @@ -3298,6 +4228,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define USDM_REG_USDM_INT_MASK_0 0xc42a0 #define USDM_REG_USDM_INT_MASK_1 0xc42b0 +/* [R 32] Interrupt register #0 read */ +#define USDM_REG_USDM_INT_STS_0 0xc4294 +#define USDM_REG_USDM_INT_STS_1 0xc42a4 /* [RW 11] Parity mask register #0 read/write */ #define USDM_REG_USDM_PRTY_MASK 0xc42c0 /* [R 11] Parity register #0 read */ @@ -3338,9 +4271,8 @@ #define USEM_REG_ENABLE_OUT 0x3000a8 /* [RW 32] This address space contains all registers and memories that are placed in SEM_FAST block. The SEM_FAST registers are described in - appendix B. In order to access the SEM_FAST registers... the base address - USEM_REGISTERS_FAST_MEMORY (Offset: 0x320000) should be added to each - SEM_FAST register offset. */ + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ #define USEM_REG_FAST_MEMORY 0x320000 /* [RW 1] Disables input messages from FIC0 May be updated during run_time by the microcode */ @@ -3351,6 +4283,7 @@ /* [RW 15] Interrupt table Read and write access to it is not possible in the middle of the work */ #define USEM_REG_INT_TABLE 0x300400 +#define USEM_REG_INT_TABLE_SIZE 256 /* [ST 24] Statistics register. The number of messages that entered through FIC0 */ #define USEM_REG_MSG_NUM_FIC0 0x300000 @@ -3423,6 +4356,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define USEM_REG_USEM_INT_MASK_0 0x300110 #define USEM_REG_USEM_INT_MASK_1 0x300120 +/* [R 32] Interrupt register #0 read */ +#define USEM_REG_USEM_INT_STS_0 0x300104 +#define USEM_REG_USEM_INT_STS_1 0x300114 /* [RW 32] Parity mask register #0 read/write */ #define USEM_REG_USEM_PRTY_MASK_0 0x300130 #define USEM_REG_USEM_PRTY_MASK_1 0x300140 @@ -3491,11 +4427,8 @@ writes the initial credit value; read returns the current value of the credit counter. Must be initialized to 64 at start-up. */ #define XCM_REG_FIC1_INIT_CRD 0x20410 -/* [RW 8] The maximum delayed ACK counter value.Must be at least 2. Per port - value. */ #define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c -/* [RW 28] The delayed ACK timeout in ticks. Per port value. */ #define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c /* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1 @@ -3545,6 +4478,7 @@ #define XCM_REG_N_SM_CTX_LD_2 0x20068 #define XCM_REG_N_SM_CTX_LD_3 0x2006c #define XCM_REG_N_SM_CTX_LD_4 0x20070 +#define XCM_REG_N_SM_CTX_LD_5 0x20074 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; if 1 - normal activity. */ @@ -3556,6 +4490,8 @@ weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define XCM_REG_PBF_WEIGHT 0x200d0 +#define XCM_REG_PHYS_QNUM3_0 0x20100 +#define XCM_REG_PHYS_QNUM3_1 0x20104 /* [RW 8] The Event ID for Timers formatting in case of stop done. */ #define XCM_REG_STOP_EVNT_ID 0x200b8 /* [RC 1] Set at message length mismatch (relative to last indication) at @@ -3603,53 +4539,17 @@ weight 8 (the most prioritised); 1 stands for weight 1(least prioritised); 2 stands for weight 2; tc. */ #define XCM_REG_USEM_WEIGHT 0x200c8 -/* [RW 2] DA counter command; used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_CMD00 0x201d4 -/* [RW 2] DA counter command; used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_CMD01 0x201d8 -/* [RW 2] DA counter command; used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_CMD10 0x201dc -/* [RW 2] DA counter command; used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_CMD11 0x201e0 -/* [RW 8] DA counter update value used in case of window update doorbell.The - first index stands for the value DaEnable of that connection. The second - index stands for port number. */ #define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4 -/* [RW 8] DA counter update value; used in case of window update - doorbell.The first index stands for the value DaEnable of that - connection. The second index stands for port number. */ #define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8 -/* [RW 8] DA counter update value; used in case of window update - doorbell.The first index stands for the value DaEnable of that - connection. The second index stands for port number. */ #define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec -/* [RW 8] DA counter update value; used in case of window update - doorbell.The first index stands for the value DaEnable of that - connection. The second index stands for port number. */ #define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0 -/* [RW 1] DA timer command; used in case of window update doorbell.The first - index stands for the value DaEnable of that connection. The second index - stands for port number. */ #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4 -/* [RW 1] DA timer command; used in case of window update doorbell.The first - index stands for the value DaEnable of that connection. The second index - stands for port number. */ #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8 -/* [RW 1] DA timer command; used in case of window update doorbell.The first - index stands for the value DaEnable of that connection. The second index - stands for port number. */ #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc -/* [RW 1] DA timer command; used in case of window update doorbell.The first - index stands for the value DaEnable of that connection. The second index - stands for port number. */ #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; acknowledge output is deasserted; all other signals are treated as usual; @@ -3659,6 +4559,8 @@ #define XCM_REG_XCM_INT_MASK 0x202b4 /* [R 14] Interrupt register #0 read */ #define XCM_REG_XCM_INT_STS 0x202a8 +/* [R 30] Parity register #0 read */ +#define XCM_REG_XCM_PRTY_STS 0x202b8 /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). Is used to determine the number of the AG context REG-pairs written back; @@ -3715,6 +4617,7 @@ mechanism. The fields are: [5:0] - message length; 11:6] - message pointer; 16:12] - next pointer. */ #define XCM_REG_XX_DESCR_TABLE 0x20480 +#define XCM_REG_XX_DESCR_TABLE_SIZE 32 /* [R 6] Used to read the XX protection Free counter. */ #define XCM_REG_XX_FREE 0x20240 /* [RW 6] Initial value for the credit counter; responsible for fulfilling @@ -3728,7 +4631,7 @@ #define XCM_REG_XX_MSG_NUM 0x20428 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ #define XCM_REG_XX_OVFL_EVNT_ID 0x20058 -/* [RW 15] Indirect access to the XX table of the XX protection mechanism. +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] - header pointer. */ #define XCM_REG_XX_TABLE 0x20500 @@ -3745,6 +4648,9 @@ #define XSDM_REG_AGG_INT_EVENT_17 0x16607c #define XSDM_REG_AGG_INT_EVENT_18 0x166080 #define XSDM_REG_AGG_INT_EVENT_19 0x166084 +#define XSDM_REG_AGG_INT_EVENT_10 0x166060 +#define XSDM_REG_AGG_INT_EVENT_11 0x166064 +#define XSDM_REG_AGG_INT_EVENT_12 0x166068 #define XSDM_REG_AGG_INT_EVENT_2 0x166040 #define XSDM_REG_AGG_INT_EVENT_20 0x166088 #define XSDM_REG_AGG_INT_EVENT_21 0x16608c @@ -3756,6 +4662,15 @@ #define XSDM_REG_AGG_INT_EVENT_27 0x1660a4 #define XSDM_REG_AGG_INT_EVENT_28 0x1660a8 #define XSDM_REG_AGG_INT_EVENT_29 0x1660ac +#define XSDM_REG_AGG_INT_EVENT_3 0x166044 +#define XSDM_REG_AGG_INT_EVENT_30 0x1660b0 +#define XSDM_REG_AGG_INT_EVENT_31 0x1660b4 +#define XSDM_REG_AGG_INT_EVENT_4 0x166048 +#define XSDM_REG_AGG_INT_EVENT_5 0x16604c +#define XSDM_REG_AGG_INT_EVENT_6 0x166050 +#define XSDM_REG_AGG_INT_EVENT_7 0x166054 +#define XSDM_REG_AGG_INT_EVENT_8 0x166058 +#define XSDM_REG_AGG_INT_EVENT_9 0x16605c /* [RW 1] For each aggregated interrupt index whether the mode is normal (0) or auto-mask-mode (1) */ #define XSDM_REG_AGG_INT_MODE_0 0x1661b8 @@ -3832,6 +4747,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define XSDM_REG_XSDM_INT_MASK_0 0x16629c #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac +/* [R 32] Interrupt register #0 read */ +#define XSDM_REG_XSDM_INT_STS_0 0x166290 +#define XSDM_REG_XSDM_INT_STS_1 0x1662a0 /* [RW 11] Parity mask register #0 read/write */ #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc /* [R 11] Parity register #0 read */ @@ -3872,9 +4790,8 @@ #define XSEM_REG_ENABLE_OUT 0x2800a8 /* [RW 32] This address space contains all registers and memories that are placed in SEM_FAST block. The SEM_FAST registers are described in - appendix B. In order to access the SEM_FAST registers the base address - XSEM_REGISTERS_FAST_MEMORY (Offset: 0x2a0000) should be added to each - SEM_FAST register offset. */ + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ #define XSEM_REG_FAST_MEMORY 0x2a0000 /* [RW 1] Disables input messages from FIC0 May be updated during run_time by the microcode */ @@ -3885,6 +4802,7 @@ /* [RW 15] Interrupt table Read and write access to it is not possible in the middle of the work */ #define XSEM_REG_INT_TABLE 0x280400 +#define XSEM_REG_INT_TABLE_SIZE 256 /* [ST 24] Statistics register. The number of messages that entered through FIC0 */ #define XSEM_REG_MSG_NUM_FIC0 0x280000 @@ -3957,6 +4875,9 @@ /* [RW 32] Interrupt mask register #0 read/write */ #define XSEM_REG_XSEM_INT_MASK_0 0x280110 #define XSEM_REG_XSEM_INT_MASK_1 0x280120 +/* [R 32] Interrupt register #0 read */ +#define XSEM_REG_XSEM_INT_STS_0 0x280104 +#define XSEM_REG_XSEM_INT_STS_1 0x280114 /* [RW 32] Parity mask register #0 read/write */ #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 @@ -3993,10 +4914,14 @@ #define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3) #define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3) #define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3) +#define EMAC_LED_1000MB_OVERRIDE (1L<<1) +#define EMAC_LED_100MB_OVERRIDE (1L<<2) +#define EMAC_LED_10MB_OVERRIDE (1L<<3) +#define EMAC_LED_2500MB_OVERRIDE (1L<<12) +#define EMAC_LED_OVERRIDE (1L<<0) +#define EMAC_LED_TRAFFIC (1L<<6) #define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26) -#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26) #define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26) -#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26) #define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26) #define EMAC_MDIO_COMM_DATA (0xffffL<<0) #define EMAC_MDIO_COMM_START_BUSY (1L<<29) @@ -4013,6 +4938,7 @@ #define EMAC_MODE_PORT_MII (1L<<2) #define EMAC_MODE_PORT_MII_10M (3L<<2) #define EMAC_MODE_RESET (1L<<0) +#define EMAC_REG_EMAC_LED 0xc #define EMAC_REG_EMAC_MAC_MATCH 0x10 #define EMAC_REG_EMAC_MDIO_COMM 0xac #define EMAC_REG_EMAC_MDIO_MODE 0xb4 @@ -4030,14 +4956,16 @@ #define EMAC_RX_MODE_PROMISCUOUS (1L<<8) #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) -#define EMAC_TX_MODE_RESET (1L<<0) +#define MISC_REGISTERS_GPIO_0 0 #define MISC_REGISTERS_GPIO_1 1 #define MISC_REGISTERS_GPIO_2 2 #define MISC_REGISTERS_GPIO_3 3 #define MISC_REGISTERS_GPIO_CLR_POS 16 #define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24) #define MISC_REGISTERS_GPIO_FLOAT_POS 24 +#define MISC_REGISTERS_GPIO_HIGH 1 #define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_GPIO_LOW 0 #define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 #define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 #define MISC_REGISTERS_GPIO_PORT_SHIFT 4 @@ -4127,7 +5055,7 @@ #define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10) #define RESERVED_GENERAL_ATTENTION_BIT_0 0 -#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3e0 +#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3ffe0 #define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000 #define RESERVED_GENERAL_ATTENTION_BIT_6 6 @@ -4156,6 +5084,17 @@ /* mcp error attention bit */ #define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11 +/*E1H NIG status sync attention mapped to group 4-7*/ +#define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12 +#define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13 +#define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14 +#define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15 +#define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16 +#define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17 +#define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18 +#define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19 + + #define LATCHED_ATTN_RBCR 23 #define LATCHED_ATTN_RBCT 24 #define LATCHED_ATTN_RBCN 25 @@ -4221,22 +5160,41 @@ #define PCICFG_OFFSET 0x2000 #define PCICFG_VENDOR_ID_OFFSET 0x00 #define PCICFG_DEVICE_ID_OFFSET 0x02 -#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c -#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e -#define PCICFG_INT_LINE 0x3c -#define PCICFG_INT_PIN 0x3d +#define PCICFG_COMMAND_OFFSET 0x04 +#define PCICFG_STATUS_OFFSET 0x06 +#define PCICFG_REVESION_ID 0x08 #define PCICFG_CACHE_LINE_SIZE 0x0c #define PCICFG_LATENCY_TIMER 0x0d -#define PCICFG_REVESION_ID 0x08 -#define PCICFG_BAR_1_LOW 0x10 -#define PCICFG_BAR_1_HIGH 0x14 -#define PCICFG_BAR_2_LOW 0x18 -#define PCICFG_BAR_2_HIGH 0x1c -#define PCICFG_GRC_ADDRESS 0x78 -#define PCICFG_GRC_DATA 0x80 +#define PCICFG_BAR_1_LOW 0x10 +#define PCICFG_BAR_1_HIGH 0x14 +#define PCICFG_BAR_2_LOW 0x18 +#define PCICFG_BAR_2_HIGH 0x1c +#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c +#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e +#define PCICFG_INT_LINE 0x3c +#define PCICFG_INT_PIN 0x3d +#define PCICFG_PM_CSR_OFFSET 0x4c +#define PCICFG_GRC_ADDRESS 0x78 +#define PCICFG_GRC_DATA 0x80 #define PCICFG_DEVICE_CONTROL 0xb4 #define PCICFG_LINK_CONTROL 0xbc +#define PCICFG_COMMAND_IO_SPACE (1<<0) +#define PCICFG_COMMAND_MEM_SPACE (1<<1) +#define PCICFG_COMMAND_BUS_MASTER (1<<2) +#define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3) +#define PCICFG_COMMAND_MWI_CYCLES (1<<4) +#define PCICFG_COMMAND_VGA_SNOOP (1<<5) +#define PCICFG_COMMAND_PERR_ENA (1<<6) +#define PCICFG_COMMAND_STEPPING (1<<7) +#define PCICFG_COMMAND_SERR_ENA (1<<8) +#define PCICFG_COMMAND_FAST_B2B (1<<9) +#define PCICFG_COMMAND_INT_DISABLE (1<<10) +#define PCICFG_COMMAND_RESERVED (0x1f<<11) + +#define PCICFG_PM_CSR_STATE (0x3<<0) +#define PCICFG_PM_CSR_PME_STATUS (1<<15) + #define BAR_USTRORM_INTMEM 0x400000 #define BAR_CSTRORM_INTMEM 0x410000 #define BAR_XSTRORM_INTMEM 0x420000 @@ -4336,7 +5294,7 @@ #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000 #define MDIO_REG_BANK_CL73_IEEEB1 0x10 -#define MDIO_CL73_IEEEB1_AN_ADV2 0x01 +#define MDIO_CL73_IEEEB1_AN_ADV2 0x01 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040 @@ -4365,7 +5323,7 @@ #define MDIO_REG_BANK_RX_ALL 0x80f0 #define MDIO_RX_ALL_RX_EQ_BOOST 0x1c #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 -#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10 +#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10 #define MDIO_REG_BANK_TX0 0x8060 #define MDIO_TX0_TX_DRIVER 0x17 @@ -4392,213 +5350,266 @@ #define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 -#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 +#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 -#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010 -#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 +#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 #define MDIO_REG_BANK_GP_STATUS 0x8120 -#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B -#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020 - -#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00 -#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00 #define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130 -#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11 -#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1 -#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13 -#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1) +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1) #define MDIO_REG_BANK_SERDES_DIGITAL 0x8300 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 -#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008 -#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000 -#define MDIO_SERDES_DIGITAL_MISC1 0x18 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000 -#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008 -#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1 0x18 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009 #define MDIO_REG_BANK_OVER_1G 0x8320 -#define MDIO_OVER_1G_DIGCTL_3_4 0x14 -#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0 -#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5 -#define MDIO_OVER_1G_UP1 0x19 -#define MDIO_OVER_1G_UP1_2_5G 0x0001 -#define MDIO_OVER_1G_UP1_5G 0x0002 -#define MDIO_OVER_1G_UP1_6G 0x0004 -#define MDIO_OVER_1G_UP1_10G 0x0010 -#define MDIO_OVER_1G_UP1_10GH 0x0008 -#define MDIO_OVER_1G_UP1_12G 0x0020 -#define MDIO_OVER_1G_UP1_12_5G 0x0040 -#define MDIO_OVER_1G_UP1_13G 0x0080 -#define MDIO_OVER_1G_UP1_15G 0x0100 -#define MDIO_OVER_1G_UP1_16G 0x0200 -#define MDIO_OVER_1G_UP2 0x1A -#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007 -#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038 -#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0 -#define MDIO_OVER_1G_UP3 0x1B -#define MDIO_OVER_1G_UP3_HIGIG2 0x0001 -#define MDIO_OVER_1G_LP_UP1 0x1C -#define MDIO_OVER_1G_LP_UP2 0x1D -#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff -#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780 -#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7 -#define MDIO_OVER_1G_LP_UP3 0x1E +#define MDIO_OVER_1G_DIGCTL_3_4 0x14 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5 +#define MDIO_OVER_1G_UP1 0x19 +#define MDIO_OVER_1G_UP1_2_5G 0x0001 +#define MDIO_OVER_1G_UP1_5G 0x0002 +#define MDIO_OVER_1G_UP1_6G 0x0004 +#define MDIO_OVER_1G_UP1_10G 0x0010 +#define MDIO_OVER_1G_UP1_10GH 0x0008 +#define MDIO_OVER_1G_UP1_12G 0x0020 +#define MDIO_OVER_1G_UP1_12_5G 0x0040 +#define MDIO_OVER_1G_UP1_13G 0x0080 +#define MDIO_OVER_1G_UP1_15G 0x0100 +#define MDIO_OVER_1G_UP1_16G 0x0200 +#define MDIO_OVER_1G_UP2 0x1A +#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007 +#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038 +#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0 +#define MDIO_OVER_1G_UP3 0x1B +#define MDIO_OVER_1G_UP3_HIGIG2 0x0001 +#define MDIO_OVER_1G_LP_UP1 0x1C +#define MDIO_OVER_1G_LP_UP2 0x1D +#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780 +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7 +#define MDIO_OVER_1G_LP_UP3 0x1E #define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350 -#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10 -#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001 -#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002 + +#define MDIO_REG_BANK_CL73_USERB0 0x8370 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001 + +#define MDIO_REG_BANK_AER_BLOCK 0xFFD0 +#define MDIO_AER_BLOCK_AER_REG 0x1E + +#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0 +#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040 +#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200 +#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000 +#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000 +#define MDIO_COMBO_IEEE0_MII_STATUS 0x11 +#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004 +#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020 +/*WhenthelinkpartnerisinSGMIImode(bit0=1),then +bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge. +Theotherbitsarereservedandshouldbezero*/ +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 + + +#define MDIO_PMA_DEVAD 0x1 +/*ieee*/ +#define MDIO_PMA_REG_CTRL 0x0 +#define MDIO_PMA_REG_STATUS 0x1 +#define MDIO_PMA_REG_10G_CTRL2 0x7 +#define MDIO_PMA_REG_RX_SD 0xa +/*bcm*/ +#define MDIO_PMA_REG_BCM_CTRL 0x0096 +#define MDIO_PMA_REG_FEC_CTRL 0x00ab +#define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000 +#define MDIO_PMA_REG_LASI_CTRL 0x9002 +#define MDIO_PMA_REG_RX_ALARM 0x9003 +#define MDIO_PMA_REG_TX_ALARM 0x9004 +#define MDIO_PMA_REG_LASI_STATUS 0x9005 +#define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800 +#define MDIO_PMA_REG_DIGITAL_CTRL 0xc808 +#define MDIO_PMA_REG_DIGITAL_STATUS 0xc809 +#define MDIO_PMA_REG_TX_POWER_DOWN 0xca02 +#define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09 +#define MDIO_PMA_REG_MISC_CTRL 0xca0a +#define MDIO_PMA_REG_GEN_CTRL 0xca10 +#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188 +#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a +#define MDIO_PMA_REG_ROM_VER1 0xca19 +#define MDIO_PMA_REG_ROM_VER2 0xca1a +#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b +#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d +#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46 +#define MDIO_PMA_REG_MISC_CTRL1 0xca85 + +#define MDIO_PMA_REG_7101_RESET 0xc000 +#define MDIO_PMA_REG_7107_LED_CNTL 0xc007 +#define MDIO_PMA_REG_7101_VER1 0xc026 +#define MDIO_PMA_REG_7101_VER2 0xc027 + + +#define MDIO_WIS_DEVAD 0x2 +/*bcm*/ +#define MDIO_WIS_REG_LASI_CNTL 0x9002 +#define MDIO_WIS_REG_LASI_STATUS 0x9005 + +#define MDIO_PCS_DEVAD 0x3 +#define MDIO_PCS_REG_STATUS 0x0020 +#define MDIO_PCS_REG_LASI_STATUS 0x9005 +#define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000 +#define MDIO_PCS_REG_7101_SPI_MUX 0xD008 +#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A +#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2) +#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028 + -#define MDIO_REG_BANK_CL73_USERB0 0x8370 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14 -#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001 +#define MDIO_XS_DEVAD 0x4 +#define MDIO_XS_PLL_SEQUENCER 0x8000 +#define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a -#define MDIO_REG_BANK_AER_BLOCK 0xFFD0 -#define MDIO_AER_BLOCK_AER_REG 0x1E +#define MDIO_AN_DEVAD 0x7 +/*ieee*/ +#define MDIO_AN_REG_CTRL 0x0000 +#define MDIO_AN_REG_STATUS 0x0001 +#define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020 +#define MDIO_AN_REG_ADV_PAUSE 0x0010 +#define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400 +#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800 +#define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00 +#define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00 +#define MDIO_AN_REG_ADV 0x0011 +#define MDIO_AN_REG_ADV2 0x0012 +#define MDIO_AN_REG_LP_AUTO_NEG 0x0013 +#define MDIO_AN_REG_MASTER_STATUS 0x0021 +/*bcm*/ +#define MDIO_AN_REG_LINK_STATUS 0x8304 +#define MDIO_AN_REG_CL37_CL73 0x8370 +#define MDIO_AN_REG_CL37_AN 0xffe0 +#define MDIO_AN_REG_CL37_FD 0xffe4 -#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0 -#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10 -#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040 -#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000 -#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000 -#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040 -#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100 -#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200 -#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000 -#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000 -#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000 -#define MDIO_COMBO_IEEE0_MII_STATUS 0x11 -#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004 -#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180 -#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE\ - 0x0000 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH\ - 0x0180 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020 -#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 +#define IGU_FUNC_BASE 0x0400 -#define EXT_PHY_AUTO_NEG_DEVAD 0x7 -#define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1 -#define EXT_PHY_OPT_WIS_DEVAD 0x2 -#define EXT_PHY_OPT_PCS_DEVAD 0x3 -#define EXT_PHY_OPT_PHY_XS_DEVAD 0x4 -#define EXT_PHY_OPT_CNTL 0x0 -#define EXT_PHY_OPT_CNTL2 0x7 -#define EXT_PHY_OPT_PMD_RX_SD 0xa -#define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a -#define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800 -#define EXT_PHY_OPT_PMD_DIGITAL_CNT 0xc808 -#define EXT_PHY_OPT_PMD_DIGITAL_SATUS 0xc809 -#define EXT_PHY_OPT_CMU_PLL_BYPASS 0xca09 -#define EXT_PHY_OPT_LASI_CNTL 0x9002 -#define EXT_PHY_OPT_RX_ALARM 0x9003 -#define EXT_PHY_OPT_LASI_STATUS 0x9005 -#define EXT_PHY_OPT_PCS_STATUS 0x0020 -#define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018 -#define EXT_PHY_OPT_AN_LINK_STATUS 0x8304 -#define EXT_PHY_OPT_AN_CL37_CL73 0x8370 -#define EXT_PHY_OPT_AN_CL37_FD 0xffe4 -#define EXT_PHY_OPT_AN_CL37_AN 0xffe0 -#define EXT_PHY_OPT_AN_ADV 0x11 +#define IGU_ADDR_MSIX 0x0000 +#define IGU_ADDR_INT_ACK 0x0200 +#define IGU_ADDR_PROD_UPD 0x0201 +#define IGU_ADDR_ATTN_BITS_UPD 0x0202 +#define IGU_ADDR_ATTN_BITS_SET 0x0203 +#define IGU_ADDR_ATTN_BITS_CLR 0x0204 +#define IGU_ADDR_COALESCE_NOW 0x0205 +#define IGU_ADDR_SIMD_MASK 0x0206 +#define IGU_ADDR_SIMD_NOMASK 0x0207 +#define IGU_ADDR_MSI_CTL 0x0210 +#define IGU_ADDR_MSI_ADDR_LO 0x0211 +#define IGU_ADDR_MSI_ADDR_HI 0x0212 +#define IGU_ADDR_MSI_DATA 0x0213 -#define EXT_PHY_KR_PMA_PMD_DEVAD 0x1 -#define EXT_PHY_KR_PCS_DEVAD 0x3 -#define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7 -#define EXT_PHY_KR_CTRL 0x0000 -#define EXT_PHY_KR_STATUS 0x0001 -#define EXT_PHY_KR_AUTO_NEG_COMPLETE 0x0020 -#define EXT_PHY_KR_AUTO_NEG_ADVERT 0x0010 -#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE 0x0400 -#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC 0x0800 -#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH 0x0C00 -#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK 0x0C00 -#define EXT_PHY_KR_LP_AUTO_NEG 0x0013 -#define EXT_PHY_KR_CTRL2 0x0007 -#define EXT_PHY_KR_PCS_STATUS 0x0020 -#define EXT_PHY_KR_PMD_CTRL 0x0096 -#define EXT_PHY_KR_LASI_CNTL 0x9002 -#define EXT_PHY_KR_LASI_STATUS 0x9005 -#define EXT_PHY_KR_MISC_CTRL1 0xca85 -#define EXT_PHY_KR_GEN_CTRL 0xca10 -#define EXT_PHY_KR_ROM_CODE 0xca19 -#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP 0x0188 -#define EXT_PHY_KR_ROM_MICRO_RESET 0x018a +#define IGU_INT_ENABLE 0 +#define IGU_INT_DISABLE 1 +#define IGU_INT_NOP 2 +#define IGU_INT_NOP2 3 -#define EXT_PHY_SFX7101_XGXS_TEST1 0xc00a |