diff options
Diffstat (limited to 'drivers/net/bonding/bond_sysfs.c')
-rw-r--r-- | drivers/net/bonding/bond_sysfs.c | 103 |
1 files changed, 61 insertions, 42 deletions
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 08f3d396bcd..6caac0ffb2f 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -50,9 +50,9 @@ extern struct bond_parm_tbl bond_mode_tbl[]; extern struct bond_parm_tbl bond_lacp_tbl[]; extern struct bond_parm_tbl xmit_hashtype_tbl[]; extern struct bond_parm_tbl arp_validate_tbl[]; +extern struct bond_parm_tbl fail_over_mac_tbl[]; static int expected_refcount = -1; -static struct class *netdev_class; /*--------------------------- Data Structures -----------------------------*/ /* Bonding sysfs lock. Why can't we just use the subsystem lock? @@ -111,7 +111,6 @@ static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t char *ifname; int rv, res = count; struct bonding *bond; - struct bonding *nxt; sscanf(buffer, "%16s", command); /* IFNAMSIZ*/ ifname = command + 1; @@ -122,7 +121,7 @@ static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t if (command[0] == '+') { printk(KERN_INFO DRV_NAME ": %s is being created...\n", ifname); - rv = bond_create(ifname, &bonding_defaults, &bond); + rv = bond_create(ifname, &bonding_defaults); if (rv) { printk(KERN_INFO DRV_NAME ": Bond creation failed.\n"); res = rv; @@ -134,7 +133,7 @@ static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t rtnl_lock(); down_write(&bonding_rwsem); - list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) + list_for_each_entry(bond, &bond_dev_list, bond_list) if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) { /* check the ref count on the bond's kobject. * If it's > expected, then there's a file open, @@ -548,42 +547,37 @@ static ssize_t bonding_show_fail_over_mac(struct device *d, struct device_attrib { struct bonding *bond = to_bond(d); - return sprintf(buf, "%d\n", bond->params.fail_over_mac) + 1; + return sprintf(buf, "%s %d\n", + fail_over_mac_tbl[bond->params.fail_over_mac].modename, + bond->params.fail_over_mac); } static ssize_t bonding_store_fail_over_mac(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { int new_value; - int ret = count; struct bonding *bond = to_bond(d); if (bond->slave_cnt != 0) { printk(KERN_ERR DRV_NAME ": %s: Can't alter fail_over_mac with slaves in bond.\n", bond->dev->name); - ret = -EPERM; - goto out; + return -EPERM; } - if (sscanf(buf, "%d", &new_value) != 1) { + new_value = bond_parse_parm(buf, fail_over_mac_tbl); + if (new_value < 0) { printk(KERN_ERR DRV_NAME - ": %s: no fail_over_mac value specified.\n", - bond->dev->name); - ret = -EINVAL; - goto out; + ": %s: Ignoring invalid fail_over_mac value %s.\n", + bond->dev->name, buf); + return -EINVAL; } - if ((new_value == 0) || (new_value == 1)) { - bond->params.fail_over_mac = new_value; - printk(KERN_INFO DRV_NAME ": %s: Setting fail_over_mac to %d.\n", - bond->dev->name, new_value); - } else { - printk(KERN_INFO DRV_NAME - ": %s: Ignoring invalid fail_over_mac value %d.\n", - bond->dev->name, new_value); - } -out: - return ret; + bond->params.fail_over_mac = new_value; + printk(KERN_INFO DRV_NAME ": %s: Setting fail_over_mac to %s (%d).\n", + bond->dev->name, fail_over_mac_tbl[new_value].modename, + new_value); + + return count; } static DEVICE_ATTR(fail_over_mac, S_IRUGO | S_IWUSR, bonding_show_fail_over_mac, bonding_store_fail_over_mac); @@ -952,6 +946,45 @@ out: static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp); /* + * Show and set the number of grat ARP to send after a failover event. + */ +static ssize_t bonding_show_n_grat_arp(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct bonding *bond = to_bond(d); + + return sprintf(buf, "%d\n", bond->params.num_grat_arp); +} + +static ssize_t bonding_store_n_grat_arp(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(d); + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no num_grat_arp value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0 || new_value > 255) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n", + bond->dev->name, new_value); + ret = -EINVAL; + goto out; + } else { + bond->params.num_grat_arp = new_value; + } +out: + return ret; +} +static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR, bonding_show_n_grat_arp, bonding_store_n_grat_arp); +/* * Show and set the MII monitor interval. There are two tricky bits * here. First, if MII monitoring is activated, then we must disable * ARP monitoring. Second, if the timer isn't running, we must @@ -1388,6 +1421,7 @@ static struct attribute *per_bond_attrs[] = { &dev_attr_updelay.attr, &dev_attr_lacp_rate.attr, &dev_attr_xmit_hash_policy.attr, + &dev_attr_num_grat_arp.attr, &dev_attr_miimon.attr, &dev_attr_primary.attr, &dev_attr_use_carrier.attr, @@ -1412,19 +1446,9 @@ static struct attribute_group bonding_group = { */ int bond_create_sysfs(void) { - int ret = 0; - struct bonding *firstbond; - - /* get the netdev class pointer */ - firstbond = container_of(bond_dev_list.next, struct bonding, bond_list); - if (!firstbond) - return -ENODEV; + int ret; - netdev_class = firstbond->dev->dev.class; - if (!netdev_class) - return -ENODEV; - - ret = class_create_file(netdev_class, &class_attr_bonding_masters); + ret = netdev_class_create_file(&class_attr_bonding_masters); /* * Permit multiple loads of the module by ignoring failures to * create the bonding_masters sysfs file. Bonding devices @@ -1443,10 +1467,6 @@ int bond_create_sysfs(void) printk(KERN_ERR "network device named %s already exists in sysfs", class_attr_bonding_masters.attr.name); - else { - netdev_class = NULL; - return 0; - } } return ret; @@ -1458,8 +1478,7 @@ int bond_create_sysfs(void) */ void bond_destroy_sysfs(void) { - if (netdev_class) - class_remove_file(netdev_class, &class_attr_bonding_masters); + netdev_class_remove_file(&class_attr_bonding_masters); } /* |