summaryrefslogtreecommitdiffstats
path: root/drivers/net/can/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/Kconfig')
-rw-r--r--drivers/net/can/Kconfig38
1 files changed, 24 insertions, 14 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index b56bd9e8095..9862b2e0764 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -1,9 +1,7 @@
menu "CAN Device Drivers"
- depends on CAN
config CAN_VCAN
tristate "Virtual Local CAN Interface (vcan)"
- depends on CAN
---help---
Similar to the network loopback devices, vcan offers a
virtual local CAN interface.
@@ -13,7 +11,7 @@ config CAN_VCAN
config CAN_SLCAN
tristate "Serial / USB serial CAN Adaptors (slcan)"
- depends on CAN
+ depends on TTY
---help---
CAN driver for several 'low cost' CAN interfaces that are attached
via serial lines or via USB-to-serial adapters using the LAWICEL
@@ -33,16 +31,16 @@ config CAN_SLCAN
config CAN_DEV
tristate "Platform CAN drivers with Netlink support"
- depends on CAN
default y
---help---
Enables the common framework for platform CAN drivers with Netlink
support. This is the standard library for CAN drivers.
If unsure, say Y.
+if CAN_DEV
+
config CAN_CALC_BITTIMING
bool "CAN bit-timing calculation"
- depends on CAN_DEV
default y
---help---
If enabled, CAN bit-timing parameters will be calculated for the
@@ -54,15 +52,26 @@ config CAN_CALC_BITTIMING
arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
If unsure, say Y.
+config CAN_LEDS
+ bool "Enable LED triggers for Netlink based drivers"
+ depends on LEDS_CLASS
+ select LEDS_TRIGGERS
+ ---help---
+ This option adds two LED triggers for packet receive and transmit
+ events on each supported CAN device.
+
+ Say Y here if you are working on a system with led-class supported
+ LEDs and you want to use them as canbus activity indicators.
+
config CAN_AT91
tristate "Atmel AT91 onchip CAN controller"
- depends on CAN_DEV && (ARCH_AT91SAM9263 || ARCH_AT91SAM9X5)
+ depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9X5
---help---
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
and AT91SAM9X5 processors.
config CAN_TI_HECC
- depends on CAN_DEV && ARCH_OMAP3
+ depends on ARCH_OMAP3
tristate "TI High End CAN Controller"
---help---
Driver for TI HECC (High End CAN Controller) module found on many
@@ -70,12 +79,12 @@ config CAN_TI_HECC
config CAN_MCP251X
tristate "Microchip MCP251x SPI CAN controllers"
- depends on CAN_DEV && SPI && HAS_DMA
+ depends on SPI && HAS_DMA
---help---
Driver for the Microchip MCP251x SPI CAN controllers.
config CAN_BFIN
- depends on CAN_DEV && (BF534 || BF536 || BF537 || BF538 || BF539 || BF54x)
+ depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x
tristate "Analog Devices Blackfin on-chip CAN"
---help---
Driver for the Analog Devices Blackfin on-chip CAN controllers
@@ -85,7 +94,7 @@ config CAN_BFIN
config CAN_JANZ_ICAN3
tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
- depends on CAN_DEV && MFD_JANZ_CMODIO
+ depends on MFD_JANZ_CMODIO
---help---
Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
connects to a MODULbus carrier board.
@@ -98,13 +107,13 @@ config HAVE_CAN_FLEXCAN
config CAN_FLEXCAN
tristate "Support for Freescale FLEXCAN based chips"
- depends on CAN_DEV && HAVE_CAN_FLEXCAN
+ depends on HAVE_CAN_FLEXCAN
---help---
Say Y here if you want to support for Freescale FlexCAN.
config PCH_CAN
tristate "Intel EG20T PCH CAN controller"
- depends on CAN_DEV && PCI
+ depends on PCI
---help---
This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
is an IOH for x86 embedded processor (Intel Atom E6xx series).
@@ -112,7 +121,7 @@ config PCH_CAN
config CAN_GRCAN
tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
- depends on CAN_DEV && OF
+ depends on OF
---help---
Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.
Note that the driver supports little endian, even though little
@@ -131,9 +140,10 @@ source "drivers/net/can/usb/Kconfig"
source "drivers/net/can/softing/Kconfig"
+endif
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
- depends on CAN
---help---
Say Y here if you want the CAN device drivers to produce a bunch of
debug messages to the system log. Select this if you are having